Related
Trying to test an app I developed; first roadblock is the setting under Applications / Unknown Sources [Allow installation of non-Market applications] is missing!
This is on a new g-Tablet (1.2-4349). I changed ROM to Mountain Laurel yesterday, and setting option is still not there. Can anyone confirm if this setting is available in Honeycomb or any other ROM versions, and/or how to make it appear (or what file to hack into to change the setting on the g-Tab?)
Thanks,
G
sava1007 said:
Trying to test an app I developed; first roadblock is the setting under Applications / Unknown Sources [Allow installation of non-Market applications] is missing!
This is on a new g-Tablet (1.2-4349). I changed ROM to Mountain Laurel yesterday, and setting option is still not there. Can anyone confirm if this setting is available in Honeycomb or any other ROM versions, and/or how to make it appear (or what file to hack into to change the setting on the g-Tab?)
Thanks,
G
Click to expand...
Click to collapse
It's never been there on my gTablets (4 - since they was new-also.4349s). Not sure if it's gTablet thing or Android 2.2 or greater thing. My old Anroid 2.1 tab had the option.
Even without the option your gTabelt can install from non-market sources.
Thanks for the reply. I think it is this "Unknown Sources" option which is what allows the Android device to be displayed as a target in the SDK to which to port your app. Currently, I am only able to 'test' the app in the Emulator through Eclipse.
If I create the entire .apk package, then yes I could probably install it w/o going through the Market, but when you're testing an app and compiling 40+ times a day, that's not a very productive way to do it. Essentially, I need to have the gTablet available as a device through the SDK to port the app, otherwise I'm stuck in testing it in the Emulator on my Windows computer for now...
UPDATE TO THE ABOVE POST -----
Just to resolve/close out this issue, in case someone has this same problem down the road... I just updated the ROM to the Flashback-Honeycomb, and the Unknown Sources option is THERE! Woo-hoo! I had absolutely NO issues with the update; simply downloaded/copied the update.zip to the device root, rebooted with power/Vol+ selected the zip, then rebooted and selected "Wipe user data" (then scroll down to "Yes"), it is up, running and quite an elegant interface. All is working well about an hour into this!!!
"So easy, a caveman can do it"
AS ALWAYS use at your own risk. Not responsible for anything that might happen to your phone.
Updated DeSense for both, ICS and GB, roms. Changes are NO LONGER permanent.
What can I use this for?:
- set your mainver to accept any of the rezound PH*.zip files while using bootloader
- change look and feel of your rom from sense to something else
- remove extra apps not needed to use your phone
- install apps you need before logging into market
- easily reboot into recovery/bootloader w/o pulling the battery
- block ads
- fix bluetooth on ICS roms
Instructions:
** Must ALREADY be rooted before running (htc Dev Unlock)**
- HTC Drivers must be installed on PC
- USB Debugging turned on for phone
- Connect via usb and charge only
- extract zip somewhere and double click DeSense_v#.bat
- Choose option in menu
Extra steps (recommended)
- Prior to de-sense, log in to all your accounts and setup the intial syncing because you may not be able to once you have de-sensed. Syncing should work after you de-sense if you do this...
Optional:
- Nandroid backup your phone in case you run into issues.
Available options:
**1** DeSense for both ICS and GB
Removes Sense UI. Must have a launcher already installed!!!
**2** Fix Bluetooth on ICS roms
Thx to JoelZ. Click here and thank/donate!
**3** Restore
Restores all of the original apk's you have removed using this util
**4** Install apps (choice menu)
Included apps are:
- wifi tether
- es file explorer
- titanium backup
- Swype
- Nova Launcher (ICS Only)
**5** Remove more HTC, Verizon & google extras
Now removes even more apps!!! If you need something back that this removed, you can use any root exploring program to move the apk from /system/bkup/ to /system/
**6** Change Mainver to universal
Will set your MainVer to "1.00.000.0". This should allow you to install any rom's boot image without getting a mainver error.
Big thanks to drellisdee. Click here to thank/donate!
**7** Remove HTC Lockscreen
Removes HTC circle lockscreen and reverts to default android (NOTE: See Troubleshooting/Issues below, before performing this option*.)
**8** Install ICS notification bar and settings (!!!do not use!!!)
do not use this option as most of (if not all) the newer roms will not be based off the 3.0.11
**9** Install ad-block hosts file
This will block ads in your browser(s) and apps. Must reboot to take effect.
**0** Reboot (choice menu)
Reboot options
- into bootloader
- into recovery
- or normal
Change Log:
v7 -Changed ICS launcher to nova launcher
-Changed settings.apk to a stable one tweaked by romanbb
-Added "flash boot.img" option (use caution)
v7_1 - No longer deleting files, making a backup instead.
- No longer removing htc video (apk)
- Made flashing a boot.img even easier and fail proof
- No longer installing swype/wifi on system (applications were not opening on some roms also gives u ability to uninstall them)
v8 - Updated with new options
- No longer removing htc video (for real this time )
v8_1 - Made instructions clearer for new 4.0.3 builds
- correctly mounting system for option 8
v9 - Removing more extra apps that might be on your phone
- Added TiBu, ES File Explorer
- Updated wifi tether, nova launcher
- removed go launcher, mms, and contacts apks because of confusion (use v8.1) if you want those apks
Troubleshooting/Known Issues:
Wifi tether isn't working
- Open the app go to
settings > change device profile > "Samsung Galaxy Nesus (CDMA/LTE)"
settings > change setup method > "Netd (master)"
settings > check "Routing Fix"
I get error messages after removing HTC extras, Verizon/Google exras, etc
- Reboot your phone!!!
HTC Lockscreen no longer has shortcuts
- No fix available
*Need to unlock phone to answer calls
- No fix available, if this is a problem DO NOT uninstall HTC lockscreen
**Cannot click "About" & "ROM Control" in ICS settings
- No fix available, if this is a problem DO NOT install ICS notification and settings
**System UI crashes after boot
- No fix available, if this is a problem DO NOT install ICS notification and settings
- It only crashes once after boot, other than that I have not seen it crash again.
Download Link:
v9
Download v9 Here
v8.1
Download v8.1 Here
Does the wifi tether charge against normal data or will carrier detect and add?
Also, is there a list of all items frozen? I've been slowly freezing htc stuff with zerg/titanium bu and I know I missed some stuff out of caution/uncertainty/fear.
Thanks!
Sent from my ADR6425LVW using Tapatalk
if you open the batch file with any text editor you can see what gets disabled. If you disable an apk twice, it will not affect your phone. So no worries about re-freezing frozen stuff.
wifi tether uses root to provide the service, i cannot make any guarantees to what Verizon will or will not do. I have been using this apk for a while without issues, but I am not making any claims. This stuff is always "use at your own risk"!
The program uses your phone data connection (which is part of your data plan) to provide wifi to other devices i.e. other phones, laptops, desktops, ps3's, etc. If you have limited data plan you can go over the limit using this app.
So i posted this in the Supertool thread - removing sense stops the gallery/album app from working properly. Does anyone know what dependencies the gallery app needs to work?
Thanks
This is ****in awesome excuse my language
Sent from my ADR6425LVW using xda premium
PaulTheBuilder said:
So i posted this in the Supertool thread - removing sense stops the gallery/album app from working properly. Does anyone know what dependencies the gallery app needs to work?
Thanks
Click to expand...
Click to collapse
+1 I haven't been able to track it down either.
zeroxg4 said:
+1 I haven't been able to track it down either.
Click to expand...
Click to collapse
I found the missing package is "com.htc.opensense". I'm not to sure what else this enables but I still have a de-sensed ui. I will create a batch file for easy use.
That was it. Thanks!
I understand my original .bat file is not working correctly... i'll update the original file when i get home later tonight. In the meantime you can use the frigid's super tool (link provided) although a lot of the features won't work for our rezounds...
how come after my screen just stays blank not even a lockscreen please help
mohkg said:
how come after my screen just stays blank not even a lockscreen please help
Click to expand...
Click to collapse
Pull the battery and reboot.
mohkg said:
how come after my screen just stays blank not even a lockscreen please help
Click to expand...
Click to collapse
If you used my original file, it was not processing all the way. You could just try to run the "re-sense" option, and that will return you to normal.
Will provide updated file soon
Sent from my ADR6425LVW using XDA App
I used the one tool found on Rootz Wiki and so far everything seems fine except for 2 things. The stock HTC mail app force closes upon reboot, and the gallery issue. No big deal because i just froze the stock mail app since I prefer the gmail anyways. Anyone else have the mail FC on reboot?
zetsumeikuro said:
I used the one tool found on Rootz Wiki and so far everything seems fine except for 2 things. The stock HTC mail app force closes upon reboot, and the gallery issue. No big deal because i just froze the stock mail app since I prefer the gmail anyways. Anyone else have the mail FC on reboot?
Click to expand...
Click to collapse
I want to use this so bad but I need mail to work.
janderson2k said:
I want to use this so bad but I need mail to work.
Click to expand...
Click to collapse
Mail works fine after using option 4 (even though it only says "fix gallery")
danutzz said:
Mail works fine after using option 4 (even though it only says "fix gallery")
Click to expand...
Click to collapse
Stupid question - but if sense is gone - what UI runs? Gata read the thread more.....
janderson2k said:
Stupid question - but if sense is gone - what UI runs? Gata read the thread more.....
Click to expand...
Click to collapse
It's the standard gingerbread launcher... you can install anyone you want though, like launcher pro or something
janderson2k said:
Stupid question - but if sense is gone - what UI runs? Gata read the thread more.....
Click to expand...
Click to collapse
Usually users want a de-sense if they are using an alternative launcher such as ADW
Sent from my ADR6425LVW
Marcismo55 said:
Usually users want a de-sense if they are using an alternative launcher such as ADW
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Yeah I am partial to go launcher myself but cant stomach another UI in the background. Will be nice to pull this sense stuff off the device. Thanks guys.
So far - very awesome. Works great. Love the Sense unlock with go launcher. Perfect.
Disclaimer: I do not own Viper4Android FX all rights belong to @zhuhang. You can visit official Viper XDA Thread or Official Website
Click to expand...
Click to collapse
Click to expand...
Click to collapse
What is Viper4Android?
Viper4Android is one of the best Audio Mods available for Android this is not out of opinion but of alot of other users not only Sony Device users but also users of other Android Smartphones. Very customizable with alot of options for you to tweak to suit your Audio Needs
If installed correctly and configured properly it can produce Audio far better than the default Audio Engine included in most Stock Roms
Sadly it has comptability problems with most Lollipop based Roms so until a new update is released this workaround should help
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Requirements
- Rooted Device with Busybox Installed
-> Download Viper4Android 2.3.4.0 here
-> Download SELinux Mode Changer here
-> Proceed to Settings>Developer Options then Uncheck Use NUPlayer under Media. ( Crucial )
-> Install Viper4Android and install either the High Quality Audio Driver or the Super Audio Quality.
-> Open SELinux Mode Changer in select Permissive instead of Enforcing. ( Grant it Root Access if prompted )
-> Reboot and Enjoy. ( You may have to Set SELinux Mode Changer to permissive every after boot )
I can confirm this works on my Z3 Compact on Rooted FW 23.1.A.1.28, also works on my Z1C on Lollipop FW
Also important to turn off things like:
ClearAudio+
Sound Effects (all of them)
Dynamic normalizer
You can find them in
Settings-> Sound and Notifications
cbuctok said:
Also important to turn off things like:
ClearAudio+
Sound Effects (all of them)
Dynamic normalizer
You can find them in
Settings-> Sound and Notifications
Click to expand...
Click to collapse
I uses NC31EM headset and it doesn't work because it stops to use V4A driver after 30s and then the Sony driver take the lead.
I found that if you froze the "sound settings" application it work. it is the case but it disables the Noise reduction of the headset.
Quote ...
You forgot some very important settings to make it work.
If you check the driver status with your settings ... everything enabled but the driver is not processing.
So please add the next 2 very important setting to make it work on z3c :
1. run in compatible mode (it's an option in menu)
2 . force enable v4a
after that you can check that is working. i dont think that your viper works without theese settings.
bye
ed_bracam said:
I found that if you froze the "sound settings" application it work. it is the case but it disables the Noise reduction of the headset.
Click to expand...
Click to collapse
What application? Can't find it in Rom Toolbox.
cbuctok said:
What application? Can't find it in Rom Toolbox.
Click to expand...
Click to collapse
System tuner pro provides it. The standard application manager of the phone provides it
Settings--> application --> all apps --> Sound settings --> disable
I use V4A from PlayStore which is mentioned by original developer as unofficial but working and it works fine with SELinux Mode Changer, too.
Thanks for the tutorial, @Revontheus!
@cbuctoc works with ClearAudio etc., no need to turn off anything @hekermaker no compatible mode or forcing needed
Maybe you both use an uncommon ROM version or something but none of the things you both experience seems to be something that's missing in OP - works fine here when following OP exactly, without forcing or disabling anything.
I am using a pre rooted rom, the 5.0.2 . I tried to use it with the instructions given by revontheus. Of course it "worked" , i repeat no errors or something. The driver is activated but not processing . After i forced etc. now the driver is processing too. The instructions were in a post for activating viper on android 5.1 Nexus.
hekermeker said:
I am using a pre rooted rom, the 5.0.2 . I tried to use it with the instructions given by revontheus. Of course it "worked" , i repeat no errors or something. The driver is activated but not processing . After i forced etc. now the driver is processing too. The instructions were in a post for activating viper on android 5.1 Nexus.
Click to expand...
Click to collapse
Strange, for me it works without forcing, but I had to disable and enable it again. Well, most important thing is that it works at all.
You don't have to force enable Viper or use FX Compatible Mode when using my method
z3c 5.1.1
it worked on z3 compact on stock android 5.1.1 (firmware .232)
specter16 said:
it worked on z3 compact on stock android 5.1.1 (firmware .232)
Click to expand...
Click to collapse
If you Install Viper4Android, it is best you disable Sound Settings and MusicFX because it would cause conflicts since Viper4Android is an Audio Engine and so is Sony's Default
Revontheus said:
If you Install Viper4Android, it is best you disable Sound Settings and MusicFX because it would cause conflicts since Viper4Android is an Audio Engine and so is Sony's Default
Click to expand...
Click to collapse
That's what i did otherwise it will not work
Sent from my Xperia Z1
I cant find NU Player
Revontheus said:
Requirements
- Rooted Device with Busybox Installed
-> Download Viper4Android 2.3.4.0 here
-> Download SELinux Mode Changer here
-> Proceed to Settings>Developer Options then Uncheck Use NUPlayer under Media. ( Crucial )
-> Install Viper4Android and install either the High Quality Audio Driver or the Super Audio Quality.
-> Open SELinux Mode Changer in select Permissive instead of Enforcing. ( Grant it Root Access if prompted )
-> Reboot and Enjoy. ( You may have to Set SELinux Mode Changer to permissive every after boot )
I can confirm this works on my Z3 Compact on Rooted FW 23.1.A.1.28, also works on my Z1C on Lollipop FW
Click to expand...
Click to collapse
Sir can u give me a screenshot of Unchecking the NU player because I cant seem to find it.
Thanks
ronjacob012 said:
Sir can u give me a screenshot of Unchecking the NU player because I cant seem to find it.
Thanks
Click to expand...
Click to collapse
You can find it in Settings>Developer Options
To get unlock developer options, go to about phone and press build number 7 times
SGN N7000
It works on SGN N7000 running on CM12.1 custom rom. Cool stuff indeed, thanks for sharing.
I cant made it working always Processing: No, i have MDR-NC31EM maybe its because them ?
Bartekreaper said:
I cant made it working always Processing: No, i have MDR-NC31EM maybe its because them ?
Click to expand...
Click to collapse
Check your selinux permissions. You may have to re-enable it
Sent from my Xperia Z3 compact
Selinux was permisive on every reboot, and at last try i got soft brick/bootloop 3,5 hours ago. Some minutes and clean system will boot and i will try again.
Install Viper> Install selinux mode changer and change to permissive> change to awesome player> update v. high quality and reboot= Processing Not working. Its because im using SLIM ? No any other sound mods installed.
Edit. I got it working, i don't know how but work. ??
My devive is a Samsung Galaxy S4 International (Snap 600) I9505.
Like title, I can't get Viper4Android's convolver to work on any Android 5.1 based rom (it didn't even work on a TouchWiz based 5.0.2 rom, while it worked on the Google Play Edition 5.0.1 port).
- My SE-Linux status is permissive.
- Viper4Android is installed in Priv-App.
- The convolver is in (internalStorage)\Viper4Android\Kernel.
- I unchecked "Use AwesomePlayer" in Dev Settings (V4A's other features work fine either way, just the convolver feature doesn't work no matter if I use NuPlayer or AwesomePlayer).
- LPA audio decoding is disabled (I let V4A handle this for me by clicking "Yes" at a certain pop-up that appears during the first installation
- I'm using "Super Audio Quality" setting (selected during V4A installation"
- I tried multiple version of V4A, both stock and "tweaked" (those tweaks usually consist in adding a bunch of libs)
- I tried enabling only the convolver feature, to make sure it wasn't some other effect that didn't make it work
I tried everything and searched a lot on the web but I didn't come across a solution, and at this point I'm kinda desperate.
The only thing I haven't tried is re-downloading the convolver, just in case it was somehow corrupted: I can't find the one I use anymore and the free ones I've found are not compatible with my CPU.
this custom rom, i made it for my X96 Air box
- base on X96 stock rom
- latest ATV Google APPs [06-2020]
- hybrid home, easy switch between ATV home and Non ATV Home
- easy direct access ATV app from Non ATV Home
- LiveWallpaper enabled easy Access
- Upgraded Wifi driver from latest OTA update
- clean up by remove all unnecessary app from stock rom
- Home Switcher Support Home from
JesonKung
Launcher3
Xperia
ADW
Lollipop
lawnchair
- replace file explorer
- add setting on TV Launcher
- disable battery status display on launcher widget ( need clear data of launcher app)
- extra icon pack
- and Many other tweaks
- fix broken file management
- remove droidfile
Code:
latest update checksum
//
// File Checksum Integrity Verifier version 2.05.
//
674aa99ffc762f579c38af27e3e2ab6d bullghost-x96air-20210125-signed.zip
for anyone that came from previous version here is the step:
Code:
after flash the update, you just only need to clear /wipe the cache partition.
to install the icon pack, copy the from /vendor/preinstall folder to /sdcard folder
Rom
Download Rom
Hi. Thank you for sharing.
I have been running it for a few hours and I love all the additions of features and the Android TV look (I used Mi Box S before so I prefer this look)
I do have one problem though. On stock firmware, I was able to pass through the audio to my sound bar in kodi (this lets me listen to Dolby Atmos and other surround sound technologies). I tried everything on your rom to make it work but it doesn't seem to work at all.
What worked in stock firmware:
Droid settings - sound - switch it to manual - enable all the options and set DTS to 20%. Go to Kodi, go to Kodi audio settings and enable passthrough, then play a dolby Atmos or DTS file and my soundbar said "Dolby Atmos" or "DTS" whenever I played the respective file.
In your rom:
There are three settings apps. 1 is droid settings from stock firmware, 1 is aosp settings app from stock firmware and 1 is the new settings app with extra features.
I have tried changing the droid settings sound options like on stock firmware but that does not work. I have tried using the new settings apps sound options (tried manual, auto, always allow etc etc) and that does not work either. I'm unable to get passthrough audio.
I always get PCM, even in Atmos/Dolby Digital/DTS files. My sound bar supports all of these codecs, and the box can do passthrough audio as I have already tried it on the stock firmware.
It's possible that it's due to viper4android? But I have disabled the master switch in viper as well.
Sorry for the long post but I was trying to be as detailed as possible. Honestly, apart from this, I have zero issues with your rom. I wanted to use it as a daily driver but this sound output option is a big problem as I watch a lot of 4K movies with Atmos and DTS.
If anyone is considering this rom but don't care about the issue I'm having, go for it. There are no other issues in this rom and is easily a daily driver. Works very well and highly recommended from my end.
Nasty_z said:
Hi. Thank you for sharing.
I have been running it for a few hours and I love all the additions of features and the Android TV look (I used Mi Box S before so I prefer this look)
I do have one problem though. On stock firmware, I was able to pass through the audio to my sound bar in kodi (this lets me listen to Dolby Atmos and other surround sound technologies). I tried everything on your rom to make it work but it doesn't seem to work at all.
What worked in stock firmware:
Droid settings - sound - switch it to manual - enable all the options and set DTS to 20%. Go to Kodi, go to Kodi audio settings and enable passthrough, then play a dolby Atmos or DTS file and my soundbar said "Dolby Atmos" or "DTS" whenever I played the respective file.
In your rom:
There are three settings apps. 1 is droid settings from stock firmware, 1 is aosp settings app from stock firmware and 1 is the new settings app with extra features.
I have tried changing the droid settings sound options like on stock firmware but that does not work. I have tried using the new settings apps sound options (tried manual, auto, always allow etc etc) and that does not work either. I'm unable to get passthrough audio.
I always get PCM, even in Atmos/Dolby Digital/DTS files. My sound bar supports all of these codecs, and the box can do passthrough audio as I have already tried it on the stock firmware.
It's possible that it's due to viper4android? But I have disabled the master switch in viper as well.
Sorry for the long post but I was trying to be as detailed as possible. Honestly, apart from this, I have zero issues with your rom. I wanted to use it as a daily driver but this sound output option is a big problem as I watch a lot of 4K movies with Atmos and DTS.
If anyone is considering this rom but don't care about the issue I'm having, go for it. There are no other issues in this rom and is easily a daily driver. Works very well and highly recommended from my end.
Click to expand...
Click to collapse
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Code:
//
// File Checksum Integrity Verifier version 2.05.
//
c808b36f0fe6b4c68cc869c688d6dbe6 bullghost-x96air-20200630-signed.zip
bullghost said:
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Click to expand...
Click to collapse
I'm downloading this now and will report back.
Something to note: On slimbox ROM, this issue is not there. Slimbox ROM has proper audio passthrough. Maybe that helps in fixing the bug?
bullghost said:
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Click to expand...
Click to collapse
Hi. It works perfectly on the new version!
I tested Atmos, DTS and Dolby Digital. They all work without any issues. Thanks!
The X96 air TV box has four hardware versions P1, P2, V2/P3 and P4. I have P2 hardware, can I install this ROM on my box?
Is it possible to install TWRP recovery with this rom on x96 air?
hoskic said:
Is it possible to install TWRP recovery with this rom on x96 air?
Click to expand...
Click to collapse
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Nasty_z said:
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Click to expand...
Click to collapse
Thanks, worked smooth, I just made backup through TWRP, I guess i can do restore same way?
hoskic said:
Thanks, worked smooth, I just made backup through TWRP, I guess i can do restore same way?
Click to expand...
Click to collapse
Yes exactly. You can restore it the same way, boot into TWRP and use the restore option.
Tried this rom on my TranSpeed 8K Ultra HD S905X3 box but it doesn't get passed the bootup logo. Had it on that screen for more than 15 mins. Am i missing something?
Blaggah said:
Tried this rom on my TranSpeed 8K Ultra HD S905X3 box but it doesn't get passed the bootup logo. Had it on that screen for more than 15 mins. Am i missing something?
Click to expand...
Click to collapse
I believe this rom is specific to X96Air. I think the vendor is exclusive to this model and that's probably what's causing the issue on your box. I suppose you can try to flash slimbox over on the freaktab forums instead.
Thanks for this, I tried the slimbox rom already and it doesn't boot up all the way. The slimbox works better on my S905X2 box.
Hidden WiFI can not be found
Hidden WiFi does not work properly.
[Solved] Select advanced option,enable hidden wifi
【unsolved】The wifi signal is particularly unstable, as if it is a driver problem
Do we expecting some firmware update in the future or this is final version ? Download link seem to be dead had to find this software on other website
Zakariasz said:
Do we expecting some firmware update in the future or this is final version ? Download link seem to be dead had to find this software on other website
Click to expand...
Click to collapse
Download link is fine. I think OP did not enter the link properly as clicking it does not take you to a webpage.
https://sourceforge.net/projects/bullghostdroidtvos/files/release/
With this link and you should be able to download the ROM.
hello please someone told me how to flash this rom ? i get the x96air P3 last day and i want to change rom to watch netflix in HD ? should i instal TWRP first ? i know how to flash phone and instal twrp and rom ... but its my first time in this android box
Hi i just but a x96 air P4 i will try your rom when i receive this box....
Hello,
1. Is this 32 bit or 64 bit ROM?
2. How to enable navigation and status bar in android 9?
Thank you.
Nasty_z said:
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Click to expand...
Click to collapse
Hi, owning this box, we can install TWRP in recovery by flashing with AmlogicFlasherV1.0 and the TWRP.img which is in the archive HERE, beware it will be ROOT before.