Hi forum friends, I have a problem with my recently purchased motorola X912, it happens that when I buy, I wanted rootear, well you connect and rootie with blade razr program, everything went well, I had my super user icon the desktop, when the next day it disappears root and connecting the phone to usb connect as if not only loads but does not find anything, and I can not do anything for the sole use normally but again nothing to do, I know that I all I can use to see if it connects, I put it into recovery mode and just connect with rsd lite flash sb BP ap mode but flash does not recognize that is connected
Below I detail everything and done:
1-change usb cable usb cable used and tested five other cell and recognize good
2-used several computer testing to see if it was the usb port and nothing
3-install Linux to see if it was windows and nothing
5-downloaded and copied very many rom sd memory installing it for recovery and nothing says I aborted ..
Six factory-refurbished
7-installed rsd lite to flash out there and not detected by putting it in ap
8 - downloaded the razr profits and not recognizing anything either does not work
9 - install and reinstall the motorola driver
By putting the phone in flash sb BP Modol rsd lite recognizes it no problem but do not know what is done in this function.
That could make BP mode flash sb pc recognize me cel. or you could make root of micro sd installing it and if there is some method
the smarphone freezes all the time
Thanx you for help me
Related
Hey Guy
I was trying to find a solution for the last 4 hours. I was running the Neutrino Rom before my display got a hardware error. Before I sent it back for warranty, I installed the original Motorola Firmware so the "unlocked" in the starting display is gone. Now I got my phone back and I wanted to unlock it again, because neither rooting nor installing a custom rom is possible. So I installed the drivers and the phone got recognized in normal mode. Furthermore I reboot it in RSD support mode and Windows 8 installed the SF Flash Olympus thing. I also can use fastboot. The only thing which doesnt recognize my phone is RSD lite so I couldnt find a way to unlock the bootloader. I also started in Admin mode and disabled the Windows User Control thing.... I changed the cable cuz I read it might be the cable. Still isnt working. As soon as I connect my phone in RSD support mode, Windows makes the sound of a connected device but still RSD won't recognize it. Don't know what to do. Is there another option?
I'm running on Android 2.3.4 (Build 4.5.2A-74_OLE-31.20)
It's german Telekom
I don't want to do another RSD Lite Thread but I tried every suggestion in all the other threads.
Thanks alot for your help
Tried on a XP Computer....Not working either...
Which version of RSD are you running?
- Remember to use a rear USB port just in case
- Download and install the latest USB drivers from Motorola. They can be found here: USB and PC Charging Drivers - Motorola Mobility, Inc. USA
- Download and install the latest RSD Lite as a computer Administrator (currently version 5.4.4) from here: RSDLite5.6
coolni said:
Hey Guy
I was trying to find a solution for the last 4 hours. I was running the Neutrino Rom before my display got a hardware error. Before I sent it back for warranty, I installed the original Motorola Firmware so the "unlocked" in the starting display is gone. Now I got my phone back and I wanted to unlock it again, because neither rooting nor installing a custom rom is possible. So I installed the drivers and the phone got recognized in normal mode. Furthermore I reboot it in RSD support mode and Windows 8 installed the SF Flash Olympus thing. I also can use fastboot. The only thing which doesnt recognize my phone is RSD lite so I couldnt find a way to unlock the bootloader. I also started in Admin mode and disabled the Windows User Control thing.... I changed the cable cuz I read it might be the cable. Still isnt working. As soon as I connect my phone in RSD support mode, Windows makes the sound of a connected device but still RSD won't recognize it. Don't know what to do. Is there another option?
I'm running on Android 2.3.4 (Build 4.5.2A-74_OLE-31.20)
It's german Telekom
I don't want to do another RSD Lite Thread but I tried every suggestion in all the other threads.
Thanks alot for your help
Click to expand...
Click to collapse
I couldn't get RSD Lite 5.6 to connect to my Atrix on Windows 8 either. I had to use a Windows 7 computer ( that has all the moto USB drivers installed on it ) to unlock my bootloader. Once you install the moto drivers, and you plug in the phone, you should see it installing usb drivers. If you turn on usb connection (from the notification bar USB options) to SDCard storage it will install more drivers. Then you can open the usb selection menu in the notification bar again and switch back to none. Finally got to Settings, Applications, Developer Options, and enable USB debugging which will install even more drivers.
Then firing up RSD Lite you should see it connect to your phone after that. I just couldn't get it to do it in Windows 8.
forget about it.....
you are locked after servicing your phone
no way to install anything ...
the strange thing is that after connecting the phone serviced
windows doesnt recognize the driver
but evrtyhin is fine with my other atrix 4g.
i dont know what they have done to the phone not even trying to load via sbf works.....
nothing
Hello, I tried to search a lot, but I can't find any solution for this problem.
My friend gave me this phone (XT910 M0C2E) and says, that he somehow deleted system and the phone is now unable to boot. I tried a lot, but can't find anything, that could help me. When I tried to power the device it just show red moto dual core logo and then black screen. He also says me, that previous owner installed MIUI rom.
I charged the phone, using lipol charger direct to the battery, so this is not the problem.
but the main problem is that the phone can't connect in the AP Fastboot method. It says:
Code:
AP Fastboot Flash Mode
0A.74
eMMC Info: Size 16G
bla bla...
Device is LOCKED. Status code:0
Battery OK
OK to Program
Connect USB
Data Cable
But when I connect the cable nothing happend, computer did not recognize the phone (no sound, no driver installation, nothing i device window). It is deffinitely in the phone, because I tried more computers and USB cables and if I connect the phone in SBF Mode, phone is recognized and shown RSD Lite.
I also tried to flash this rom (i think it is signed and stock)
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.2_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml
through recovery mode from external card, but it says E:signature verification failed.
I'm sorry if somewhere here is sollution, but I tried to search and also for my bad English (from Czech Republic).
I solved it. I must remove battery (remove screws and put it out) for about 1 day, then put it back and go to bootloader. Don't try to power up phone because the usb wont be recognized, again.
Sent from LG Optimus 4X HD
Did you installed Motorola Device Drivers before connecting it? This device is not plug n play dude. Do that and let me know. Btw you have to flash that rom with rsd lite, not from sdcard
Hope I've helped
Sent from my XT910 using xda premium
I have a problem with my xt615,
it started out with the bootloop problem.
after that i managed to get into flash mode (redscreen) installed the pc drivers
and tried to flash 2-3 different stock roms, and a recovery via RSD LITE version 6.
at the beginning the phone was recognized as a zeus flash device, but i changed that driver to a motorola usb device.
somehow i manage to get the phone connected in the FLASH MSM7227 but still no program can recognize it so i can flash...
since i tried to flash the recovery i cannot enter the Flash mode (red screen) and earlier, when i was trying to turn on the devices from 50power attempts 2 times it was the moto bootloop logo...
now i cannot do that...
any suggestions how to get this device flashed!?or get it into flash mode?!
all the time its blackscreen and as i enter the usb it connects to the pc depends on which mode...when i hold the powerbutton and connect it it will connect as flash device msm7227 but still...i cannot do anything via RSD LITE , also tried via adb to get it recognized. but no luck...
Help desperatly needed
HELLO GUYS, I need Help BAD! First off my Razr was going dead. It said battery to low to boot. I connected a external battery to it to charge it then I left it for a while. I don't know exactly what happened but I went into the Utility screen. I have been on it before per Forum directions to go to recovery and delete the cache. I was scrolling down and I accidentally clicked the up key to go up to recovery and clicked up on AP Fast Boot. Now My Razr is stuck in what I think is called a Boot Loop. The Motorola symbols just keeps popping up over and over. I can go back into the Utility screen I tried to go into recovery but the Motorola symbols just pops back up OVER AND OVER. I have the Razr plugged to the factory moto plug but a white light comes on and no charging screen pops up. I don't believe it charging. The battery feels Hot but when I go back into the AP Fastboot screen it says Battery Low. I may just need to leave it on there longer or it may not charge I don't know. I am AMATEUR.I am rooted per Forum instructions with Razr Blade utility. ANY HELP WOULD BE GREATLY APPRECIATED. I have no clue what to do and the more stuff I try I think Im screwing more up. When I go to AP Fast Boot it says battery low but when I plug it up it a white light on the front comes on the Moto Logo keeps popping up over and over. It wont go to recovery. I tried going to BP TOOLS, that done nothing. WHAT DO I DO??? I just want it to boot up. The only back ups I have are on my Ext SD card and thats just of the apps, contacts and I think theme. (Backed up per Titanium and ROM Toolbox) Do I need to make an Ins claim with Verizon Thanks Jason
#1 Am I stuck in Fastboot?
#2 If so am I stuck bc the battery is dead?
#3 If I get the battery charged will I be able to just choose Normal Boot and the Razr will Boot Up?
#4 If so How do I ensure its charging? I read on another site plugging it to the factory charge while stuck in fast boot will still charge the Razr (slow)
5# If none of the above, What in the World have I done and how do I get out of it?
Just adding to my Nightmare
I read somewhere I needed to connect my Razr to a PC and Update the Drivers. I went back into FastBoot, used my factory USB cable and plugged it to the PC. The driver started updating (it even said the name of the driver) I stood up and knocked my Razr off the desk. The driver failed to update. Then I hooked it back to the PC and the Drivers Failed. I hooked it to 2 other USB ports they All Failed. It keeps saying unrecognizable device. I rebooted the PC in hopes that when I hooked the Razr back up to the PC it would start to update the drivers. Now I if I hook the Razr to the Factory plug (it gets Hot) I go to the Utility Screen then to Fastboot and it still says Battery Low. I unplug it from the charger to hook it to the PC and it Blinks OFF and does NOTHING when I hook it the PC. My Razr is Factory other than the Razr Blade Root. Stock ROM and Everything. Any Help would be Greatly Appreciated, I am a NOOB so Detailed instructions would definitely increase my chances for success. Thanks Jason T.
jasonsc1 said:
I read somewhere I needed to connect my Razr to a PC and Update the Drivers. I went back into FastBoot, used my factory USB cable and plugged it to the PC. The driver started updating (it even said the name of the driver) I stood up and knocked my Razr off the desk. The driver failed to update. Then I hooked it back to the PC and the Drivers Failed. I hooked it to 2 other USB ports they All Failed. It keeps saying unrecognizable device. I rebooted the PC in hopes that when I hooked the Razr back up to the PC it would start to update the drivers. Now I if I hook the Razr to the Factory plug (it gets Hot) I go to the Utility Screen then to Fastboot and it still says Battery Low. I unplug it from the charger to hook it to the PC and it Blinks OFF and does NOTHING when I hook it the PC. My Razr is Factory other than the Razr Blade Root. Stock ROM and Everything. Any Help would be Greatly Appreciated, I am a NOOB so Detailed instructions would definitely increase my chances for success. Thanks Jason T.
Click to expand...
Click to collapse
I had this problem some months ago! mine came because of installing a rom with low battery (bad idea always...) the rom did not get installed properly, so the phone couldnt boot up, neither charge. As it was at low battery it also couldnt go fastboot to recover the stock system. I found somewhere a post (i dont remember now, but search for it, you may find) where a guy gave instructions for charging the battery by opening the phone and connecting the battery directly to the positive and negative terminal of an usb cable. This may sound too difficult, but once I had connected the battery I could go fastboot and reinstall the stock system.
Ask me if you cant find the post. It worked for me!! good luck
I found it, Charged it and I'm STILL in a Boot Loop. I won't boot to recovery or normal boot up. I'm STUCK BRICKED
Sent from my DROID RAZR using Tapatalk
You will have to download the fastboot files for your device. Flash them via RSD Lite.
Make sure you have a lot of charge before flashing the files.
FastBoot files:- http://sbf.droid-developers.org/cdma_spyder/list.php
RSD Lite v5.7:- http://www.mediafire.com/download/6c7krihb3ggj88g/RSDLite5.7.rar
Motohelper drivers:- http://www.mediafire.com/download/t3tfh3p2xcy2861/MotoHelper_2.1.40_Driver_5.5.0.exe
Install the drivers and RSD Lite. Open RSD Lite and connect your phone via the USB Cable while in AP Fastboot. The software should detect your phone and your device should appear in the list. Then simply open the fastboot files in RSD and flash them. Make sure that the process isn't interrupted.
Hope it helps.
Here ya go. Hope it helps. http://forum.xda-developers.com/showthread.php?t=2431617
Sent from my XT912 using xda app-developers app
well all started when my screen is got crazy and now i try to flash with flash ool stock rom but i can't connec my phone to the windows
I alredy read guides and did all what they say and nothing work.
after instal all drivers and plug the phone the usb reconnect every 3 seconds on and off X 100, and the only thing i have in device manager is "unknown driver" reconnecting...so i can only flash rom in CWM but i want to make format to all my storage and then flash it with flash tool...
I try 2 use w computers / and 2 usb cables nothing works...any help please?