[Q] Odin v_3.07 won't recognize m$ GS4 - Verizon Samsung Galaxy S 4

Hi all,
I had a US Cellular GS3 and rooted it in july to run CM 10.1.2 stable. It worked like a dream. I just switched over to verizon and I downloaded a tool kit to help me root my device (i got it by googling verizon s4 toolkit and going to the droidviews website) and am following the steps. However, when I get to the download moad and odin loads up, it does't recognize my phone. Therefore, when I try to flash the TAR file in the PDA box, it doesn't get sent to my phone.
Can anyone help me please? I have the newest drivers and I rebooted both my phone and my cpu, and nothing works.
Thanks in advance, I can't handle TouchWiz!

If you're sure you have the Samsung usb drivers,
Use the usb ports in the back of the computer.
Make sure you have the Samsung usb cable that came with your charger.
If those don't work try a different computer.

jd1639 said:
If you're sure you have the Samsung usb drivers,
Use the usb ports in the back of the computer.
Make sure you have the Samsung usb cable that came with your charger.
If those don't work try a different computer.
Click to expand...
Click to collapse
It worked, thanks man!!

Related

[Q] odin does not detect one fascinate but detects others

trying to flash a friends fascinate. Computer detects mine just fine, but I don't get the yellow bar in odin (also I do get an error message from the windows drivers, saying USB device not properly installed).
Any help? Could the USB port on the phone be bent just enough to screw up the usb data connection?
So you did install samsung drivers?
Kaze105 said:
So you did install samsung drivers?
Click to expand...
Click to collapse
Yep, like I said... I've flashed my fascinate with odin on this computer, same USB cable, so I know the drivers and everything are set up fine. But for some reason it won't detect the second fascinate. Just checking to see if anyone else has run into this.
Bump... I've found some other threads around with google, but no resolution. No ideas?
Posted with frankenclean2.8voodoo courtesy of adrynalyne's hard work

Bricked Samsung Vibrant - USB Issues

Hey guys just wanted to say thanks for all the help you provide on a daily basis, for all the people trying to unlock the potential in their phones. However with that being said I might have tried too hard and messed up my phones. I have a Samsung Vibrant SGH-T595 with 2.1 (update 1) updated officially by Samsung.
I rooted the phone, used clock work recovery mod and then downloaded and installed cyanogenmod 7.1 RC. However in the end I did not like so I tried to go back using my backed up copy created by clockwork mod. Doing this has now what you would call "soft bricked" my phone.
The phone is currently stuck on the Samsung boot screen when trying to power on the device. I am unable to put it into download mode via the three button setup, but I bought a USB jig and it sets it into download mode.
Everything seems great at this point but the Odin program is unable to recognize my phone. I have downloaded the official Samsung Kies, and 64 bit drivers as well for my windows 7 system but it is unable to detect my phone. I believe it maybe a defective USB issue with this phone but not sure since it can be charged through USB but I can't remember the last time I was able to connect it to the PC and transfer files via the USB cable.
My question is what else can I do other then sell it for scrap?
Try another USB cable and different ports. It will recognize it eventually.
As you have a windows 7 x64 bit version i guess Odin may need to be opened by giving Administrator permissions.
Try right clicking odin and click Run as administrator. I guess this should work.
Ran into this issue last night with my wife's Nook Color and moving some file and driver issues. Guess what? It was a bad cord. Actually used my Vibrant cord and it was instantly recognized. Yes sometimes it IS actually THAT simple.
I also suggest you go to the Dev section and download the AIO Toolbox (links are live again and don't forget the .Net files too). Uninstall the drivers you have installed and run to toolbox. It has all the correct drivers, pit/tar files and Odin. It is an invaluable tool.
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Woodrube said:
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Click to expand...
Click to collapse
Exactly. And that is how i tried updating my vibrant to froyo and ended up hard bricking it..
Yeah like someone in here said, download aio vibrant toolkit.. its a surefire way to know your drivers are good and right.. once youve ruled them out, try a diff usb port and cable (mentioned above as well). If nothing works, then you may begin to entertain the idea that your phone is in difficult position.
Probably not hardbricked tho, vibrants are very resilient; just keep trying.
Then ttheres jtag and unbrickable mod if youre absolutely sure lifes over
Sent from a cell tower to the XDA server to you.
Thanks guys I ended up recycling my phones cause nothing I did worked. I did try AIO toolbox got the drivers, tried different cables. My SG II is able to be recognized by odin 1.85 with no issues but not my vibrant. I believe it is an issue with the vibrant's usb port. I originally rooted it by doing the update.zip fix from its external sd card, did not use my usb cable at that time. My other vibrant is completely hard bricked since it wont power on with two different fully charged batteries. Anyway thanks again and next time I will research more before modding my phones.
Hey OP,
I did the same exact thing as you and soft bricked it in the same manner. Then when I tried to get Odin to recognize the phone it wouldn't with my Samsung cable. I thought I was out of luck but I went and bought a USB cable made my Belkin from Meijer and Odin recognized it! I looked at the Samsung cable and the Belkin cable and the black plastic inside the microUSB in the Belkin is thicker than the Samsung. I think that helps create a tighter contact between phone microUSB and the cable. I thought I was screwed like you and I fixed the issue with a new cable!! That simple
I used the Samsung Galaxy S II usb cable which looks like it has a very tight connection with the contacts like you said. Thanks anyway I will try that brand of cable, if I ever run into that issue.

I think I broke it....

My I605 was rooted using Casual one click. Worked fine. Then I put Revolution HD 15.0 on like a retard because I didnt realize it didnt support my phone. Made it to where I had to back to stock using CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 and Mobile Odin. Why mobile odin do you ask? Because I cant get my pc to recognize my Note 2 through odin. Worked great got back to stock 4.1.1. After a few hours of perfect operation I did the OTA 4.1.2 and installed it and imediately got boot loop samsung note 2 white screen with no Recovery Option available but I do have download mode. I tried Odin from the computer again and it still wont recognize my phone being connected. Think I did it real good this time.... Any takers?
Try using a different USB cable and/or a different USB port on your computer.
jusliloleme said:
Try using a different USB cable and/or a different USB port on your computer.
Click to expand...
Click to collapse
Yes sir I just tried a different cord and port. What seems to happen is drivers are installed and says Samsung Device but I get no feedback from Odin on the com port.
For more information I do have Kies, Odin pit and tar files, Odin 307, Samsung usb drivers installed. Unfortunately I don't have another pc to try.
Hmmmm. I just tested my connection using Odin 3.07 and Odin 1.85 and neither showed a connection to my Note II. However, when I'm powered on normally and connect the same USB from the same PC port, the Note II is recognized. So I'm not sure what is going on with Odin and am a bit worried myself should I ever need to go back to stock. Unfortunately I'm not a guru, but hopefully one will visit this thread and put forth their thoughts and guidance.
Sorry I couldn't help more.
jusliloleme said:
Try using a different USB cable and/or a different USB port on your computer.
Click to expand...
Click to collapse
+1 i had same problem, new cord amd manually install drivers, making sure usb debughing is on, amd that kies is removed from phone and computer.
Also hear it will not work on windows 8
Sent from my SCH-I605 using XDA Premium HD app
I had something similar happen. I had to uninstall and reinstall the Note 2 drivers. Then also I had to re partition the phone. Once the partition was done the phone was fully functional.
Chance77 said:
Also hear it will not work on windows 8
Click to expand...
Click to collapse
Well, if that's the case then that would explain my issue. Time to put Win7 back in a virtual machine?

Phone not detected by windows 7 help!

Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh:

[Q] Samsung S6 Undetectable by Computer

Hello guys i'll try to keep my explanation short.
Device Samsung S6 Edge (rooted)
Not detected by ANY PC anymore, HOWEVER it does charge.
I Tried 5 different cables (new, original, old) cables do work so does the main PC
as my other devices are detected.
I have deleted KIES, SMART SWITCH , DRIVERS and reinstalled in the same order.
So, i flashed the S6 back to stock using TWRP (S6 was running Custom Rom XtrestoLite).
Still nothing, so i deleted all my files from the phone and flashed it back to stock again.
Still nothing, so i wiped the complete OS off the S6.
Now i'm here.
Try to change the usb mode it may can help
somestuff said:
Try to change the usb mode it may can help
Click to expand...
Click to collapse
That's impossible as i've said my S6 has no rom and Computers do not detect the S6.
StuckOnAndroid said:
That's impossible as i've said my S6 has no rom and Computers do not detect the S6.
Click to expand...
Click to collapse
Tell me the status for now, S6 is running on stock or custom??
enable usb debugging and install usb driver again, also check in another pc/laptop whether they are detecting it or not.
Use Original cable and give a shot This might help you.
Also head over to Samsung's ofifcial Developer website and fetch the Samsung USB Driver pack which is about 15MB.
That generally solves the issue. Atleast for me!
I had the same problem think the usb board is damaged... you should replace it.
It was running a custom rom, but now the phone has no rom. I can only into download mode or TWRP and thats it.
So there are no options available on the phone itself.
I tried kies driver, smart switch driver, seperate driver from samsung website, i've also tried clockwork samsung driver. Nothing works for me.
Maybe it's the micro usb port that is damaged, but i highly doubt that.
StuckOnAndroid said:
It was running a custom rom, but now the phone has no rom. I can only into download mode or TWRP and thats it.
So there are no options available on the phone itself.
I tried kies driver, smart switch driver, seperate driver from samsung website, i've also tried clockwork samsung driver. Nothing works for me.
Maybe it's the micro usb port that is damaged, but i highly doubt that.
Click to expand...
Click to collapse
Highly improbably that the USB board is damaged. Try different cables and before that, try it on a different PC. Sometimes it does work. My friend's S6 wouldn't read in Download Mode on my PC but it did on his.
Also head over to Run on your PC and type devmgmt.msc and check if there are any drivers missing.
I think the problem is the drivers
Install new drivers or find other samsung ... and try again
i've installed many drivers including the one that is 15,3mb in size.
guys it's not the computer because it does detect my tablet and my s7.
which also means that it's not the cables and believe me i have tried many cables about 8 cables now .
it's not the drivers, i dont know what it could be.
i think i'll order a new micro usb port and try that out eventhough i know that the usb port can't be damaged.
Unless one of you has a better idea, you are welcome to share.
Update: Hi guys, i've replaced the port but the phone is still undetectable by any computer.
Does anyone know what's wrong with this device?
Seriously, is there NO ONE of you guys with any knowledge or what?
I was going to say your usb charge port is damaged enough that it will charge but not transmit data but i re-read your post and realized you can't have a charge port issue if you able were able to flash stock rom. If you have teamviewer, pm me and i'll try to help you.
I have had this issue before in the past. Turned out that the cable was at fault. Swapped it and everything worked as expected, computer found it once again.
If it's not the cables as you claim, then you may have to ship it to samsung and request a replacement device.

Categories

Resources