[Q] odin does not detect one fascinate but detects others - Fascinate Q&A, Help & Troubleshooting

trying to flash a friends fascinate. Computer detects mine just fine, but I don't get the yellow bar in odin (also I do get an error message from the windows drivers, saying USB device not properly installed).
Any help? Could the USB port on the phone be bent just enough to screw up the usb data connection?

So you did install samsung drivers?

Kaze105 said:
So you did install samsung drivers?
Click to expand...
Click to collapse
Yep, like I said... I've flashed my fascinate with odin on this computer, same USB cable, so I know the drivers and everything are set up fine. But for some reason it won't detect the second fascinate. Just checking to see if anyone else has run into this.

Bump... I've found some other threads around with google, but no resolution. No ideas?
Posted with frankenclean2.8voodoo courtesy of adrynalyne's hard work

Related

[Q] USB Device Not Recognized

So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.

[Q] How to flash stock ROM using ROM manager?

My computer wont recognize my phone at all, it just says 'USB device not recognized'. I have tried reinstalling drivers, using different USB cables, USB debugging mode, mass storage mode and mounting the SD card ALL of that.. so I know it's something wrong with the phone rather than my drivers or me being stupid. I have searched to try and find a fix for this but nothing is forthcoming.. I think it may be a faulty USB port on my phone.
Anyway, this means I can't use ODIN to flash my phone back to stock so what I want to do is flash my phone back to stock T959UVJI6 using a zip file and ROM manager if possible.. but I have looked everywhere and can't find a zip for stock ROM... Every method I've seen says to use ODIN which is impossible for me.
Any help on this or a link to where I can download a stock ROM zip would be appreciated.
ok I managed to flash Bionix Fusion 1.2 which is ok, seems to be running fine. I still can't connect to my computer though I guess I will have to get the USB port checked out.
Sounds like an issue on the PC side if it recognized the phone was connected. You sure you got the drivers... are you using the cable that came with the phone? Sounds crazy, but i had issues using my nexus one cable one time.
I tried with the cable that came with my phone and also my husband's micro usb cable.. I downloaded the drivers from the link given in the XDA forums, tried to restore drivers from KIES, downloaded drivers from other spots too.. none of them work. I also tried to connect to my husband's PC and it said 'USB device not recognized' as well. I noticed a couple of other posts where this has happened to people and there seems to be no software/using different cable solution.. I am guessing I'll just have to get the phone looked at as I'm not savvy enough to go about it myself! Thanks for the advice though
Here is the stock JK6
http://forum.xda-developers.com/showthread.php?t=857974
Thank you, I will flash this one when I get home

[Q] Need some unbricking recommendations...

I might have missed the perfect advice in searching here and there, but I couldn't find it, so I'm asking here.
I tried applying a nightly build for Cyanogen for Vibrant and now the phone is basically bricked.
It starts up, shows the Vibrant logo, brightens a bit, then shows a screen that in a second or two fills with random color noise, then restarts. This cycle repeats until I pop out the battery.
My model apparently won't respond to vol/power keypress combos to activate recovery or download mode so that was out.
I bought a microUSB jig and was able to get in download mode but ODIN doesn't ever recognize it.
I tried the adbtool to send it into recovery but it doesn't see the phone either.
I tried the AIO Vibrant Toolbox to reinstall drivers/odin/etc and it didn't help.
Finally just watching device manager seems to indicate that plugging it in and out doesn't absolutely nothing. Windows XP never sees a connection. I tried on a Windows 7 machine with similar results.
Any suggestions? Out of warranty so that means no replacement.
Thanks.
Kermit Woodall
Since you flashed cm7 you will need to install the Nexus S drivers. The regular Vibrant drivers will not work so that is likely why ODIN wont recognize the device. If you can get into download mode you shouldn't be hard bricked. Here is a link to download the Nexus S drivers (I believe this is the one I used)
http://dl.dropbox.com/u/8116690/Nexus S drivers.zip you might have to manually install this.
jordanjf86 said:
Since you flashed cm7 you will need to install the Nexus S drivers. The regular Vibrant drivers will not work so that is likely why ODIN wont recognize the device. If you can get into download mode you shouldn't be hard bricked. Here is a link to download the Nexus S drivers (I believe this is the one I used)
http://dl.dropbox.com/u/8116690/Nexus S drivers.zip you might have to manually install this.
Click to expand...
Click to collapse
This. If you are able to enter into Download Mode, you aren't bricked (unless you have a really really really bad luck).
This was extracted from the CM7 Q&A Thread on the Q&A section:
atinm said:
Q: Where can I get the Nexus S drivers?
A: Download and install the Android SDK here then download "Google USB Driver package, revision 4"
Once downloaded, right click on "Computer", "Manage", "Device Manager", "Nexus S", "Update Driver Software", and point it to wherever you isntalled the SDK
Click to expand...
Click to collapse
Also, if the above fails, the member connexion2005 offers unbrick services, and he seems to be good at it, he have a website and everything, just shot me a PM if you need the link to the website.
djluis48 said:
This. If you are able to enter into Download Mode, you aren't bricked (unless you have a really really really bad luck).
This was extracted from the CM7 Q&A Thread on the Q&A section:
Also, if the above fails, the member connexion2005 offers unbrick services, and he seems to be good at it, he have a website and everything, just shot me a PM if you need the link to the website.
Click to expand...
Click to collapse
Djluis, Good write up and assist...........
Thanks - I did try the above but when my phone is connected via USB the computer doesn't react at all. It's like I haven't plugged anything in. My other phone, a Nexus One, is recognized though.
Any ideas on how to force the install of these drivers before I have to pay connexion2005 for his services?
Thanks.
Kermit Woodall
Uninstall Samsung drivers, reboot PC, install drivers from aio box found in sticky thread or from samsung website. It should work. Also try heimdall if odin still doesn't work.
Sent from samsung vibrant
Tried the uninstall - no luck.
One issue... I'm not sure that USB Debugging Mode was selected before this all started. Could that be my problem?
Kermit Woodall
Hi,
try a different usb port and different usb cable
No luck. I suspect that this unit has a slightly bad USB port as well. Fortunately unbricking is affordable so that's what I'll have to do.
Thanks everyone for your advice.
K
kwoodall said:
No luck. I suspect that this unit has a slightly bad USB port as well. Fortunately unbricking is affordable so that's what I'll have to do.
Thanks everyone for your advice.
K
Click to expand...
Click to collapse
go to best buy, get a blackberry or HTC usb cord. most if the "bad" usb ports are the sh*T%y korean cords ( not knocking the people, just the company )
Thanks - I actually tried several USB cables - including some HTC and a Motorola one. None worked w/the phone - but worked fine with any other phone.
K

I have tried everything please help

Computer wont recognize my device anymore. I have downloaded every set of drivers from this forum, from the samsung website, I even tried downloading kies but it wouldnt recognize it either.
It worked before I did the following and now it doesnt.
First I rooted my phone with route 66 everything was going fine until I made the huge mistake (not knowing) and downloaded rom manager so that I could do a nandroid backup. Well as we all know now, you cant do that. So I got the deadly uellow verizon triangle saying unauthorized software bring it to the store. So I went through the xda forums and found the one that told me how to fix it. I used odin with the alternate restore and got it back up and running. So I wanted to go back and use adams one click unlock and root. I got everything downloaded and ready. I put my phone in developer mode and plugged it in. It starts trying to find the drivers and then it flips from debugger mode to media mode everytime. It starts seeing it as everything but a samsung phone. It says found camera and even cd rom but not the phone. I have read through everything and tried everything I could think of but I am at a loss. PLEASE HELP
Sent from my SCH-I605 using xda app-developers app
brandi1693 said:
Computer wont recognize my device anymore. I have downloaded every set of drivers from this forum, from the samsung website, I even tried downloading kies but it wouldnt recognize it either.
It worked before I did the following and now it doesnt.
First I rooted my phone with route 66 everything was going fine until I made the huge mistake (not knowing) and downloaded rom manager so that I could do a nandroid backup. Well as we all know now, you cant do that. So I got the deadly uellow verizon triangle saying unauthorized software bring it to the store. So I went through the xda forums and found the one that told me how to fix it. I used odin with the alternate restore and got it back up and running. So I wanted to go back and use adams one click unlock and root. I got everything downloaded and ready. I put my phone in developer mode and plugged it in. It starts trying to find the drivers and then it flips from debugger mode to media mode everytime. It starts seeing it as everything but a samsung phone. It says found camera and even cd rom but not the phone. I have read through everything and tried everything I could think of but I am at a loss. PLEASE HELP
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Turn off your phone, connect to your computer with the USB cord and turn back on your phone. It should start the drivers and connect to your device.
smalk said:
Turn off your phone, connect to your computer with the USB cord and turn back on your phone. It should start the drivers and connect to your device.
Click to expand...
Click to collapse
I tried that, it is still not seeing it like it is supposed to. I was able to get Odin to recognize it so that I could flash the rooted stock again but I can't get Casual Jailbreak to work. I'm not sure if it is because the drivers or not but I am guessing it has something to do with it. Every time I plug it in, it starts searching for drivers and then always switches from usb debugging mode to media mode. The checkmark is still in usb debugging but I don't think it actually is. You can watch it go from device as installer to media.
Are you using the driver install app (zadig i think its called) to install the heimdall driver on top of "gadget serial". Looking at your other post it seems like a driver issue. One thing ive noticed is, if odin can see the device then heimdalll cant and vice/versa. So if odin can see it you have the wrong driver, if you are infact installing the heimdall driver my second question is, does windows xp x64 use driver sig enforcement like win7 x64 does? if so you probably need to disable it. Just throwing my $0.02 out there.
Are you using the official USB cable? I had an aftermarket cable that had worked for months, then decided to quit working. It works with other devices just not the Note2. Changed to my original cable and all is well.
nunyazz said:
Are you using the official USB cable?
Click to expand...
Click to collapse
Also try plugging it in to the PC and not through a hub/keyboard/monitor port
Sent from my SCH-I605 using xda app-developers app
If it sees the device in the dumb verizon cd mode thing and ptp than it can see adb. Its not the cable. however i would try setting the usb debugging first than set it to camera mode. adb should still be able to pick it up
Thank you everyone for your help, I finally got the drivers working and the bootloader unlocked
brandi1693 said:
Thank you everyone for your help, I finally got the drivers working and the bootloader unlocked
Click to expand...
Click to collapse
How? Fixing to unlock my spanking new note also. I had the drivers issues late last night. When installing drivers through the Z app I never could get it to install Samsung usb drivers nor did I see serial gadget option. Running Windows Vista 64bit. I know I have Java.
Sent from my SCH-I605 using xda premium

Help with soft bricked vibrant

Hey everybody. I didn't get any replies in the vibrant section, and I figured it is also an over all samsung product question so here goes. I bought a very messed up samsung galaxy vibrant t959 off a friend for $20 hoping I could fix it. They had flashed a captivate rom to it but I can still manage to get it into download mode. But heres the problem. Odin wont recognize it when I plug it in it just says windows does not recognize device has malfunctioned or something along the lines of that, the bubble shows up over and over every two seconds. I got odin to recognize it once before, but my brother unplugged it XP. Now I can not get odin to recognize it again, any tips? I have a linux computer at my disposal as well if that helps. I am familiar with flashing, odin, android sdk, adb. I know I have drivers installed good because the same cable with the same port and same computer I actually modded this same device before my friend messed it up. Any help at all would be much appreciated.
blu422 said:
Hey everybody. I didn't get any replies in the vibrant section, and I figured it is also an over all samsung product question so here goes. I bought a very messed up samsung galaxy vibrant t959 off a friend for $20 hoping I could fix it. They had flashed a captivate rom to it but I can still manage to get it into download mode. But heres the problem. Odin wont recognize it when I plug it in it just says windows does not recognize device has malfunctioned or something along the lines of that, the bubble shows up over and over every two seconds. I got odin to recognize it once before, but my brother unplugged it XP. Now I can not get odin to recognize it again, any tips? I have a linux computer at my disposal as well if that helps. I am familiar with flashing, odin, android sdk, adb. I know I have drivers installed good because the same cable with the same port and same computer I actually modded this same device before my friend messed it up. Any help at all would be much appreciated.
Click to expand...
Click to collapse
I would recommend uninstalling and then re-installing your USB drivers and see if Odin will then recognize the phone. Another alternative would be to see if Heimdall recognizes the device and use that to flash the stock ROM to the device. If you are unfamiliar on how to use Heimdall I would recommend taking a look at this guide.
shimp208 said:
I would recommend uninstalling and then re-installing your USB drivers and see if Odin will then recognize the phone. Another alternative would be to see if Heimdall recognizes the device and use that to flash the stock ROM to the device. If you are unfamiliar on how to use Heimdall I would recommend taking a look at this guide.
Click to expand...
Click to collapse
Heimdall on windows also will not detect it
Would it make a difference if I tried it on linux? I'll also try reinstalling drivers
Edit: reinstalling drivers did not work
blu422 said:
Heimdall on windows also will not detect it
Would it make a difference if I tried it on linux? I'll also try reinstalling drivers
Edit: reinstalling drivers did not work
Click to expand...
Click to collapse
I believe you can download Samsung mobile phone driver on Samsung website
Sent from my SGH-T889 using xda premium
blu422 said:
Heimdall on windows also will not detect it
Would it make a difference if I tried it on linux? I'll also try reinstalling drivers
Edit: reinstalling drivers did not work
Click to expand...
Click to collapse
You can try it on Linux I can't guarantee it will make a difference but I would try it anyway. If you are going to try it on Linux make sure you configure USB access for the device correctly in order for the computer to recognize your phone.

Categories

Resources