Related
Hi,
I'm having an ongoing problem with my Vibrant not locking onto satellites. I've tried every trick, mod and software update I could find to no avail. After visiting Samsung's web site I saw that every time somebody asked a question about the GPS not working, Samsung's response was that it's a hardware problem and to send the phone in for repair. So I did and this is what happened......
1. I call and give them the exact problem I'm having. That the phone will not see let alone lock onto a real satellite. She emails me a 2day shipping label. I taped a note to my phone also detailing the problem for the tech to see.
2. I get an email a week later saying that they're shipping my phone back to me and this is what they did (Copied from the actual email).....
Original Problem:
Technical Inquiry
GPS
Acquiring Location
Problem found:
DROP CALLS
SW,PRL,OTSL RESET
Solution:
Passed All Functional Testing
After Google'ing what SW,PRL,OTSL RESET meant and finding out that it's just software resets, I called Samsung support back. I asked them if and why the hardware wasn't repaired and reminded them that their web site, in many places says that it's a hardware problem and to send it in for repair and that my phone NEVER DROPPED CALLS. She states that it tested ok and to wait and see. She then tells me that if I receive the phone and still have the same problem, they will find another solution so I wouldn't have to send my phone in again.
3. I received the phone last night. I put my sim and battery back in and turn on the phone. I did nothing but add my gmail account back in so I can download GPSTEST from the Marketplace. After doing so I walked outside and sure enough, after 10 minutes, no satellites. Nothing. This morning I called Samsung and to make a long story short, after talking to level three support, they tell me all they can do is have me send the phone back again.
Here's my problem with Samsung.... I followed their direction and sent my phone in for repair. I twice gave them the EXACT problem I was having. Their own website states that there is a HARDWARE problem. So instead of fixing the exact problem, they find a totally different problem to "fix" instead. They never touched the actual hardware or fixed my problem. They won't take responsibility for their error and find a solution that works. They tell me they don't replace phones, only repair them so they can't send me another phone. They won't even send me a overnight shipping label so I will only be without my phone for 5 days instead of 10. The only solution to my frustration he can offer was to give me an address to send a letter of complaint.
I'm done with Samsung. Is there anybody who can offer a solution to my GPS problem. From what I can tell, it is a hardware problem. Are there any fixes out there or do I just have to get another phone (It'll never be another Samsung)?
Also.. What other recourse with Samsung do I have? It doesn't sit well with me that I just have to accept their excuses and policies that do more for them than the customer.
Thanks
I had the same issue and I just had them send me a replacement. Just go through the live chat on your account, choose the warranty/exchange option, and then tell the rep that you tried all the fixes and updates and nothing works. It took about 15 minutes before the person said they would replace mine. Also, I would talk like you know more about the phone than they do.
Hope Samsung didn't break your gps connector tab
Gps is a hardware issue on vibrant and the best you can get is 25 feet accuracy and 30 sec lock times mostly.
In your case, you do need a replacement that can at least do this much
Sent from my SGH-T959 using Tapatalk
Why didnt you simply call tmobile and have it swapped?
Did you try the self hardware fix in this forum? Worked wonders for me and many others.
Sent from my SGH-T959 using XDA Premium App
frankwhitten said:
I had the same issue and I just had them send me a replacement. Just go through the live chat on your account, choose the warranty/exchange option, and then tell the rep that you tried all the fixes and updates and nothing works. It took about 15 minutes before the person said they would replace mine. Also, I would talk like you know more about the phone than they do.
Click to expand...
Click to collapse
Was this with Samsung or T-mobile?
I had much the same experience with Samsung as cconnell11. I last talked with Samsung a month before 2.2 was available. They assured me that 2.2 would fix it, and there was no point sending it in since they didn't have a repair procedure for it and it would come back the same way it was. I asked what would happen if 2.2 didn't fix it. They said all I could do would be to send a complaint letter.
Naturally 2.2 didn't fix the GPS. I'm thinking about what to do next.
I tried the hardware fix today and I still do not see a big improvement. I have gotten mine down as low as 6 meters but no less. My old MT3G would get really accurate compared to the Vibrant. I have more issues with Wifi than I think I do GPS. I adjusted both antennas this morning but my wifi still isn't stellar. I wish Samsung and T-Mobile would just send you a replacement phone up front and repair your phone and re-use it as a replacement after they repair it. The whole 2 day shipping thing sucks when you need your phone for work.
cyberpyr8 said:
I tried the hardware fix today and I still do not see a big improvement. I have gotten mine down as low as 6 meters but no less. My old MT3G would get really accurate compared to the Vibrant. I have more issues with Wifi than I think I do GPS. I adjusted both antennas this morning but my wifi still isn't stellar. I wish Samsung and T-Mobile would just send you a replacement phone up front and repair your phone and re-use it as a replacement after they repair it. The whole 2 day shipping thing sucks when you need your phone for work.
Click to expand...
Click to collapse
Wow I only get 10m accuracy most of the times. I know other phones can get upto 6 ~ 9 feet
You can check here http://www.n2yo.com/whats-up/?c=20 to see what satellites are in your view.
If you get a different set you will have zero chance of locking on. If you show no sat numbers initially you are getting no or incorrect GPS assist to give you at least almanac info. If that is case try GPSrestore.
Do you get any grey bars on GPS test app? They need to be greater then 30 db/No to get initial data lock. It appears that Broadcomm GPS firmware does not report any sat lock until at least 3 satellites are locked enabling a 2D fix.
The only significant HW issue reported is the antenna contact. If for some reason the GPS TCXO calibration value has been lost it could take a very long time to get a lock, maybe never. Once it does it will establish a new TCXO calibration value which is then saved for future use. GPSrestore may retrieve factory firmware stored TCXO calibration.
GPSstatus does a network request for assist data that should get you at least correct sats to look for. Use WiFi if you have it with GPSstatus. Just use GPSstatus for assist download, then close and open GPS test.
I have not tried any of the hardware fixes (yet), but have tried the software reset from Samsung with not much change. When I notice that my GPS is having a hard time locking, I turn off Wifi and it locks almost instantly. I can then turn Wifi back on and it seems to keep a lock.
As an example, I can have a lock/see of 0/2 in "GPS Status" app for minutes. I turn off wifi, wait about a minute and get have 5/12. After turning wifi back on (after lock), I still have 5/12.
By comparison, my Galaxy Tab quickly goest to 7/10 with or without Wifi on.
Accuracy (according to Google Maps) is 10m on the Vibrant and 4m on the Tab.
I am thinking that my new golf GPS app is not going to be too useful with only a 10m accuracy.
thank me later
buy a bluetooth gps receiver such as globalsat bt-359 or any sirfIII or better. Next download bluetooth gps provider from the app market. let their powers combine and you vibrant may become a fully functional gps with the purchase of onboard gps vavigation. hehe
My solution
Since originally posting this I've tried the bending the pins up hardware fix to no avail. If I'm outside with a clear sky GPS status shows several satellites and after about 5 minutes will lock onto maybe three or four of them with about 10m accuracy. Maintaining that lock though is tricky. If I get into the car, it looses it. If I turn the phone upside down and have the bottom face the sky I get a lock on 7-10 satellites with about 7m accuracy. Either way it isn't good enough and I found a new problem. Google Maps just doesn't work with the default settings. It locks the phone up no matter what updates you've done. I fixed that though by changing the Operation Mode to MS Based and the Server FQDN Type to AUTO Config. Now it doesn't lock up and works fine with the exception of the GPS problem. I looked at the Samsung car cradle and noticed that it holds the phone sideways so the internal GPS antenna is facing the sky. This should work great but I don't want it attached to my windshield.
My main problem is that I want to use the phone for Geocaching like I did with my LG Optimus. That was a great phone and the GPS was accurate to 5m consistently. So I went ahead a bought a bluetooth GPS receiver. After a lot of research I decided that the Gosget SB-369 was the best option and it was only $30.00 online. This thing is great. I get a good steady lock on 7-10 satellites with 3m accuracy. This is perfect for Geocaching and was better than my Magellan when it worked right (don't buy anything Magellan). It has a hole in it and is small and light enough to be worn around your neck with a lanyard while Geocaching. You could also just put it in your pocket. It's antenna isn't a standard patch type. It's internal, but round and omni-directional and maintains the same lock no matter what way it's facing. I would recommend this to anyone who needs good accuracy for things like golfing and Geocaching.
I'm going to use this as a solution. I get great accuracy that I need at the expense of having another little gadget to carry.
Aloha,
I have a Stock Verizon Samsung Galaxy S6 Edge. I was sitting on my couch watching tv when my phone lit up. I thought I got a message, picked it up and it said the charger connected is not genuine and charging was stopped to protect the phone (not the exact message). It was not plugged into anything. I ignored the screen. After a few minutes the screen activated again but was completely black with the exception of a tiny "x" in the bottom left corner of the screen. A voice came on and said to connect my Gear VR and install the Gear VR app. I do not own a Gear VR and until this issue did not know what it was. There was nothing I could do to get out of the screen. I tried to restart the phone and couldn't. Finally did a hard reboot. After booting up like normal it was only a minute before it did the same thing again. It renders the phone completely useless. I booted into safe mode and uninstalled everything related to Gear VR. There were no less than 3 apps that I did not install (I am assuming Samsung pushed them to the phone). It seemed to do the trick but the next day the apps were back and it did it again. I called Verizon, they had no idea what to do. They had me wipe the phone. It worked for a day before doing it again. I called Samsung and they had never heard of the issue. I can't find a thread here of anyone else with the issue either, however there are at least 50 people on YouTube that have commented on the following video with the same issue.
Here is a video of the issue (not me but someone else with the same issue)
https://www.youtube.com/watch?v=GtdahXCetu4
Here is the deal... Samsung was unable to help. They sent me a new phone under warranty. Its been 2 weeks and now the new one is doing the same thing!!!! I don't understand how this is so persistent an issue and no one on xda has posted on it. To make things more complicated when I had the first issue I was able to go into safe mode then application manager and uninstall the apps. Now they are appearing are no longer appearing under "installed" apps, it appears with the system apps and cannot be uninstalled. I have never experienced anything like this.
So there it is, I am hoping the genius of XDA can help where Samsung has failed. Thank you in advance for all the great work you guys do!
i got the same problem on my note 4... i try falshing a lot of oficial firmwares but nothing work
Work-around fix
jir0x said:
i got the same problem on my note 4... i try falshing a lot of oficial firmwares but nothing work
Click to expand...
Click to collapse
I was able to find a work around for the problem. I am not satisfied considering Samsung has offered no solution and taken no responsibility. However, if you boot into safe mode by holding the volume down and power button at the same time you can use your phone. Then go to play store and download Package Disabler Pro. This will allow you to disable the faulty Samsung Gear VR bloatware apps without rooting. It's a $2 band-aid but the solution worked for me. It has the added bonus of getting rid of all the other bloatware they load on the phone too. NFL app, I am looking at you! There was someone who said they cleaned the usb port and that worked. It didn't work for me though. So far no help from the XDA community, what's up with that?
I already install the app... thanks for the tip... but my USB port is not responding.... no charging, some times show me power sharing USB mode on... no OTG working... do you have and a idea of how to clean it?
jir0x said:
I already install the app... thanks for the tip... but my USB port is not responding.... no charging, some times show me power sharing USB mode on... no OTG working... do you have and a idea of how to clean it?
Click to expand...
Click to collapse
Use isopropyl alcohol to clean your electronics. Typically a q-tip works fine but it will not get into the port so you need to find something that will get in there. You might be able to use a cloth dipped in the alcohol and something narrow like the blunt end of a needle to work it in the port. Don't go too crazy. Rubbing the alcohol along the contacts is usually sufficient. Unless you got something corrosive on the contacts. Good luck to you.
my s6 edge was having the same problem every time i plug the cable in the micro usb port, samsug gear vr pops out and next black screen with x. additional problem 1. not able to recognize by pc 2. disconnecting while charging 3. fast charging is not working 4. sometimes it take 4 hrs to charge.
having this problem for almost a month now tried everything from hard reset , cleaning the micro usb port and i dont wanna wait for 3 months without a phone for the warranty
fortunately i was able to fix it by my self yesterday. the problem was the flat metal in the middle of the micro usb port was pushed downward (screen facing up) so i just needed to lift it up a bit by using some flat tweezers (pls be careful) and everything works fine now.. solved all the problems i mentioned above
work 100%
after taking the module apart and putting it back the phone stuck not booting up with a message "insert a supported module to turn on your phone".
The issue I believe is not related to the module itself, since the same story with camera module.
The phone could have been exposed to the high humidity the day before. Before taking it apart the phone used to make occasional sound notification like it has been plugged in to charge.
Tried to clean data pins, disassemble it but no success.
I am having the same exact problem and I was wondering if you ever figured out how to fix it?
yobritt said:
I am having the same exact problem and I was wondering if you ever figured out how to fix it?
Click to expand...
Click to collapse
no, LG has told me to send the device for a service.
I'm on a trip and quite far from any cell phone store but I would appreciate on updates with your phone as well.
upd. I have a suspicion on two metal pins going from the module. if that's the module detector pins, then they might not be connected properly. blocking them w a tape on a working phone could shed some light on this theory.
My Experience
Thought I was the only one with this problem! My phone suddenly started constantly flashing the "USB" symbol with the "Insert Cable to Charge Phone" message and associated beep, which forced me to turn off the master volume...so I couldn't hear the phone ring!. The "Insert Supported Module" happened a few times at the beginning when I first pulled out and re-inserted the module/battery, but then mysteriously stopped. I went to an AT&T store and swapped the module with their display phone, and it seemed to stop (at least for the 5+ min I tried it), so I've been trying to find a replacement bottom module (I believe it's called the "Charging Module" or "Loudspeaker"), but to no avail. I tried purchasing one (SSTParts dot com look for "LG G5 Loudspeaker"), but that came without the electronic board, so I also picked up Ebay #282082091333) to go with it...but lo and behold, when I put them together and tried it, the phone gives me the "Insert Supported Module" message and won't boot. I then tried the old circuit board with the new housing, and it did boot up...but the flashing USB came back, at least for a few minutes. So I'm waiting to see if the problem comes back full blast. So we now know that the phone will only take an OEM part, at least regarding the electronics. Called LG to see if I could buy one, but they said I had to send it in for repairs...which I don't want to do (you know how it is with intermittent problems...). One thing I was able to do was to turn off the "Notification" volume (there are four Volume controls in the "Sound" settings; this is the 3rd one down) and it seems that this quieted the problem...so it keeps happening, but it's not causing me any functional concerns...though I worry that one day it might. I've looked at Ebay #401119970468, but though it looks identical, the listing says it's for an H850, and mine's the H820...so is it worth the risk? Any other updates or ideas out there? I'm thinking of going to the AT&T store and swapping out the display model's module when no one's looking...
I sent my phone for service. Hopefully I'll have the news soon.
Okay, so they they returned the phone back to the store saying "the damage is too expensive" and it's beyond the warranty. I'm pretty mad, will go to pick it up and see wtf is going on.
Won't turn back on..
ArtDesire said:
after taking the module apart and putting it back the phone stuck not booting up with a message "insert a supported module to turn on your phone".
The issue I believe is not related to the module itself, since the same story with camera module.
The phone could have been exposed to the high humidity the day before. Before taking it apart the phone used to make occasional sound notification like it has been plugged in to charge.
Tried to clean data pins, disassemble it but no success.
Click to expand...
Click to collapse
Happened to me about 5 minutes ago. Try blowing some air on the module.. trust me it will work.
Also if no airdryer is handy, take out the module let it sit out overnight and reconnect few hours later.it works. It gives time to dry out. This is a major flaw.mother****ers; They owe us the G6
Air it out it'll come back at around half an hour,expect it to also have low battery power.
airing it out didnt work for me.
the only thing that worked for me was to replace the bottom part, ie. the charging module. I got one from ebay and it worked like a charm. My g5 is almost back in its new condition.
on ebay, search for Genuine Charging Module Bottom Chin
Fixed
My wife's phone had this same problem. I think it mostly dirty contacts that cause this problem. I used contact cleaner, let dry assembled and it worked great. These companies have you over a barrel when you send it in.
this issue is with the dumb bottom power module I have same issue but I am lucky that I had bought the LG Camera module that has this module built in, so I had a backup so to speak (other than I can't use my case at the moment) and Sprint no longer has the module, so I will be ordering these http://www.ebay.com/itm/like/282313529509?chn=ps&dispItem=1 (They look new and having a pack of 3 of these should be worth it.) hopefully this works for others too.
Thanks.
I have a doubt
I have in my hands 2 g5 phones
one from sprint and one from cellcom?fixme?
however I CAN NOT exchange this module among phones. If I do so, I receive the error which prevents booting.
But every module works fine on its phone
I talked to a friend who received a lot of these phones for sale
all from sprint, and he say he could not exchange this part in the phones and instead he had to mark every part to its phone to prevent accidental swapping.
I told to him it should be impossible to be this way, and came to this forum/thread to satisfy my ignorance.
any comments?
yurais said:
I have a doubt
I have in my hands 2 g5 phones
one from sprint and one from cellcom?fixme?
however I CAN NOT exchange this module among phones. If I do so, I receive the error which prevents booting.
But every module works fine on its phone
I talked to a friend who received a lot of these phones for sale
all from sprint, and he say he could not exchange this part in the phones and instead he had to mark every part to its phone to prevent accidental swapping.
I told to him it should be impossible to be this way, and came to this forum/thread to satisfy my ignorance.
any comments?
Click to expand...
Click to collapse
I have a Verizon and sprint g5 and its the same between the two modules which irritates me too cause I figured extra parts
ArtDesire said:
Okay, so they they returned the phone back to the store saying "the damage is too expensive" and it's beyond the warranty. I'm pretty mad, will go to pick it up and see wtf is going on.
Click to expand...
Click to collapse
This is far far too late, I know. But those brass (I assume, as they are contacts which would need to be fairly durable) connectors you mentioned covering are 100 % the problem. I lightly, and I do mean very lightly, wet the pad of my fingertip and wet each of those connectors for the hope of conductivity. It worked like a charm. After around 100x of the module error, blowing with a blow dryer and trying to clean off the inner contacts blindly, it finally worked. I've had to do this on a few occasions now and it always works.
Hope this helps someone out,
regurak
I found the solution, you dont have to buy another one, it's just maintenance.
I tried doing some maintenance to all metal contacts I found and it's fixed right away, I assume this would apply to most if not all cases, some contact points are in the upper phone body, so no wonder why someone would get the error with any modules he/she tried. Let me know if it works for you but I think it will, you dont need to buy another part/phone.
Don't forget to hit the THANKS button.
SamaelThuum said:
I tried doing some maintenance to all metal contacts I found and it's fixed right away, I assume this would apply to most if not all cases, some contact points are in the upper phone body, so no wonder why someone would get the error with any modules he/she tried. Let me know if it works for you but I think it will, you dont need to buy another part/phone.
Don't forget to hit the THANKS button.
Click to expand...
Click to collapse
Ok it's been a week or two after I dissassembled the charging piece and posted those pictures and all that and IT JUST HAPPENED AGAIN LAST NIGHT. I noticed it happened because my battery was totally dead and I tried to start charging from my computer's USB 3.0, I remember it also started like this the first time, SO, I guess it's a software thing, not hardware. As soon as you plug it to the computer it will start taking energy, so, you know that even if you unplug the phone from anything, it will still show the error message supported module blabla. As soon as this happens to you, UNPLUG THE PHONE so it doesnt take charge, so, if it keeps showing the error message by itself and hopefully the battery would be so low that it wont show it for more than a minute before it shuts off due to battery. (I know you would say, well, just hard cycle the phone by taking the battery out and in again and try to turn it on or to plug to normal charger, I tried this but it would still show the error, even after I tried draining phone by holding power button without battery for like 1 min, only way that seemed to "reset" it was if batt COMPLETELY died, there's a point where if u try to turn on it only says like "battery too low to turn on"), SO, after battery COMPLETELY died, I plugged it to A NORMAL CHARGER and it worked it time.
SO, if battery is dead, I wont try to charge by PC USB for now
Just happened to my phone out of nowhere.
I kept getting the usb connection options message on my phone, then it just kept buzzing for no reason. So I went to restart the phone and now I'm getting the Insert Supported Module error.
I already know AT&T and our phone insurance will be completely useless. Damn phone isn't even paid off. The LG G5 was the BIGGEST waste of money ever. I hate this stupid phone.
JC Pro1000S Phone NAND IC Programmer
latest JC Pro 1000S programmer which it can match most of the testing module, recently i found a new web for phone repair tools supplying, it is a nice team, and i have ordered a data test module with jc pro 1000s for my phone repair shop, honestly it is a nice experiences, it can save time and solve the motherboard fault fast.
And recently ,i found there exist products in amazon, i want to try, is there someone can provide some advise for me ?
I spilled coffee on my phone and it started sating "insert a supported module to turn on your phone" I put it in a bag of rice over night and it is still displaying the same message. I have no idea what to do. Im worried that all the pictures/videos I have on the phone is lost as well. has anyone that was able to get their phone working again lost all pictures or videos?
My AT&T H820 LG G5 is out of warranty and LG won't honor any repair since I bought it on eBay. I have tried 2 band aid fixes - shimming underneath the metal mesh damper gasket and also shimming underneath the motherboard where the 3 gold pins touch along with bending pins upward. Both "repairs" lasted a week. So is there a definitive and gauranteed fix? What is LG doing, just replacing the metal mesh and damper gasket and then it fails again? I also noticed that my metal mesh damper gasket is a different appearance than what I have seen photos of online, as if there is a revised part. My GPS is now completely non-functioning.
Anybody? Surely there has to be a lasting repair and known cause.
Seems not. I have given up, aside from occasionally popping back here to see if anyone's found something new. I have taken to using an old phone as a bluetooth GPS transmitter. It's a pain, but it works.
Unfortunately LG still uses those same old crappy useless springs that it did several years ago, and they are not very flexible hence why it fails and then fails again. I think putting items underneath will only bend it even further slightly raising them would have been a better fix and then firmly attaching the case. Probably too late for you. The only other option would be solder in some more but I haven't seen the board for ths device.
Would it be possible to use the GPS antenna from my bootloop G4?
Jezza0 said:
Seems not. I have given up, aside from occasionally popping back here to see if anyone's found something new. I have taken to using an old phone as a bluetooth GPS transmitter. It's a pain, but it works.
Click to expand...
Click to collapse
I've looked how to do this and can only see how to use a phone as a GPS transmitter for a pc, please could you tell me how you did it?
Edit: I found one, worked my way through until it came to allow mock locations within developer settings, to find that as I am running android 7 this option has been removed so back to square one
Sent from my LG-H850 using XDA-Developers Legacy app
3dd1 said:
I've looked how to do this and can only see how to use a phone as a GPS transmitter for a pc, please could you tell me how you did it?[/URL]
Click to expand...
Click to collapse
Sure. On the phone with working GPS you want to share, install btGPS from Meowsbox, and get the licence key too (£1 if I recall correctly).
On the G5, install Bluetooth GPS from GG MobLab (which is free and fully functioning).
Once both apps are installed, you just have to pair the devices via bluetooth, enable the transmitter on the old phone, and finally select the old phone in the dropdown on the G5 and press connect.
Is it annoying? Yeah, a bit, but actually I can keep my old phone (Samsung S3) hidden away in the car and it still gives decent reception. And because the screen's off on that device, it lasts for hours without killing the battery.
HTH.
Jezza0 said:
Sure. On the phone with working GPS you want to share, install btGPS from Meowsbox, and get the licence key too (£1 if I recall correctly).
On the G5, install Bluetooth GPS from GG MobLab (which is free and fully functioning).
Once both apps are installed, you just have to pair the devices via bluetooth, enable the transmitter on the old phone, and finally select the old phone in the dropdown on the G5 and press connect.
Is it annoying? Yeah, a bit, but actually I can keep my old phone (Samsung S3) hidden away in the car and it still gives decent reception. And because the screen's off on that device, it lasts for hours without killing the battery.
HTH.
Click to expand...
Click to collapse
Thanks for that Before I buy the software for the phone with working gps, does it require GPS mock locations on the G5 as it appears that functionality has been removed from the developer settings in android 7
Sent from my LG-H850 using XDA-Developers Legacy app
3dd1 said:
Thanks for that Before I buy the software for the phone with working gps, does it require GPS mock locations on the G5 as it appears that functionality has been removed from the developer settings in android 7
Click to expand...
Click to collapse
Ahh - yes, good point. I also had to set Bluetooth GPS as the mock location app. Since that's the free app, I'd install that first and see if it can be configured. Also you can test out the transmitter app for (IIRC) 10 minutes before it dies in good crippleware form. Plenty of time to make sure it's working though.
Although... I'm using Android 7.0 on my H860 and mock locations is working fine
I ended up taking a chance and dropped a very small amount of solder on each of the spring contacts everyone keeps talking about lifting or putting a small piece of plastic underneath. In the past lifting the spring helped for a month or so before it started to not seek GPS again.
Yes, I've tried the whole APN update, using GPS Toolbox (which I've had before LG G5), rooted, etc but believe too this is simply a hardware issue on the contacts.
As far as the soldering is concerned, if you're near sighted, you won't need a magnifying glass but the contacts are very small so a very steady hand is a must and of course some soldering skill is required. I'll try to take a macro shot of how it looks this weekend. So far after a month it's been rock solid.
The 3 golden pins are from the volume control. The internet has been spread with fake information relevant to fixing the LG G5's GPS Fix as I also think that opening it up and closing it back down and so on just reseats the contact from the real place for a little while See the most useful marked answer for further explaination: https://nl.ifixit.com/Answers/View/394237/GPS+Not+working+well+at+all
delete
So I've been experiencing the same issue disucussed here on reddit
https://www.reddit.com/r/SonyXperia/comments/un62zy
Basically, after the phone has been one for a few hours to a day or so, the figerprint senor essentially acts like it doesnt exist. Even the fingerprint manager disapears from the system menues. Restarting the phone usually brings it back, but not always. I've seen some people attribute it to heat, but my phone rarely gets hot.
It really feels like a software issue. I contacted sony about this issue, and they say they are aware of it, but all they can really offer is to use the sony Xperia companion program to wipe the phone.
It might help to mention that i am rooted and unlocked bootloader. However, my phone has been for months before this issue started. I don't feel like those two things are connected.
It doesn't feel like a hardware issue. But does anyone have an idea what the issue might be?
I have the same problem as you. Neither a wipe nor a different firmware helped me eventually.
I sadly learned to live with it.
Is it after a few hours no matter what, or have you noticed it stop working after charging? Cuz a bad charger can knock it out, though usually only while charging but it's possibly you have a charger that causes it to stop working until reboot?
ZellZoy said:
Is it after a few hours no matter what, or have you noticed it stop working after charging? Cuz a bad charger can knock it out, though usually only while charging but it's possibly you have a charger that causes it to stop working until reboot?
Click to expand...
Click to collapse
I think for me, it is, no matter what it becomes faulty after a while, been using the original Sony charger + cable.
But I have a substitute that I can try, thank you for the info.
I've officially gotten to a point where neither a reboot nor safe mode brings it back.
It's such a weird issue. This phone won't be as easy to take apart as my previous phones.
cheesepuff said:
I've officially gotten to a point where neither a reboot nor safe mode brings it back.
It's such a weird issue. This phone won't be as easy to take apart as my previous phones.
Click to expand...
Click to collapse
I still hope that Sony will release a Software Update that fixes it …
Hello Everybody,
Same here, i updated to the last version 61.2.A.0.418.
I have the Xperia 1 Mark III UK version. I did a Factory Reset, and the fingerprint sensor works from time to time and stops working completely.
Then I did a hard reset and format, from Xperia Companion. Also with the same result.
It is the third time that I completely reinstall it using Xperia Companion.
- The fingerprint sensor does not work and if you restart the system it works for a short period of time.
- Another thing that I have noticed is that the problem that the Gmail application does not receive notifications of new emails (despite being turned on and configured) has also returned as it happened in other firmware updates.
- And finally, it only happened to me once but the notification LED turn on in blue light and did not go off until I did a forced shutdown.
I don't know what is happening, why this update has broken so many things. I hope sharing this will help others.
It seems to be an electrical noise design defect. My original Xperia 1 III rebooted if it had a fingerprint set, the screen off, and was fast charging with the factory charger. It self-destructed while sending it in for repairs and SBE made false claims that I had altered the firmware. I exchanged it and the replacement has issues too. I can pick up the phone off the table and it says the fingerprint reader is disabled from too many attempts. The touchscreen sometimes goes crazy too. Tap-to-wake is essentially run-battery-dead-because-screen-never-turns-off.
The other issues in this thread are software bugs, probably with the low-memory-killer. This is definitely not my favorite phone.
I have a UK 1 III and have not really had any problems with the finger print scanner, it struggles to open the phone if the screen is off, but if I pick the phone up and the screen comes on, it unlocks every time using the scanner. I have not modded the phone or changed software and have had the phone for just over 2 years.
Hi I wonder if anyone has tried to replace the fingerprint sensor and flex cable to try to fix it. These could be bought for like 10 dollars together in China so might be worth a try!