my phone's bootloader is unlocked ..
trying to root it using DoomLord rooting tool ..
in the CMD menu, it's showing "daemon started successfully" and it's srucked there for last 10mints!!
please help asap.
prds359 said:
my phone's bootloader is unlocked ..
trying to root it using DoomLord rooting tool ..
in the CMD menu, it's showing "daemon started successfully" and it's srucked there for last 10mints!!
please help asap.
Click to expand...
Click to collapse
try using this instead http://forum.xda-developers.com/showthread.php?t=2219781
prds359 said:
my phone's bootloader is unlocked ..
trying to root it using DoomLord rooting tool ..
in the CMD menu, it's showing "daemon started successfully" and it's srucked there for last 10mints!!
please help asap.
Click to expand...
Click to collapse
flash the stock ics.587 first and then followthis bro... http://forum.xda-developers.com/showthread.php?t=2219781
Why don't you install pre rooted roms as a start.
Sent from my Xperia Live with Walkman using XDA Premium 4 mobile app
If you say your bootloader is unlocked and you flash any custom kernel, you will get root
Sent from my Nexus 4 running Android 4.3
thanks a lot for replying guys ..
the problem was, I forgot to check usb debugging option ..
and the process went fine afterwards ..
facing another problem though ..
unable to flash CM 9.1 through CWM ..
it's showing "installation aborted"
HELP NEEDED ..
thanks a lot for replying guys ..
the problem was, I forgot to check usb debugging option ..
and the process went fine afterwards ..
phone is Rooted n has unlocked Boot-loader ..
facing another problem though ..
unable to flash CM 9.1 through CWM ..
it's showing "installation aborted" each time am trying to flash.
HELP NEEDED ..
stock kernel & s/w reinstalled (via PC Companion)
- since this is wt19i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/show...8#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/show...3#post30441163
-
- go in very details through here http://forum.xda-developers.com/show....php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/show....php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do something bad to your small friend.
prds359 said:
thanks a lot for replying guys ..
the problem was, I forgot to check usb debugging option ..
and the process went fine afterwards ..
phone is Rooted n has unlocked Boot-loader ..
facing another problem though ..
unable to flash CM 9.1 through CWM ..
it's showing "installation aborted" each time am trying to flash.
HELP NEEDED ..
Click to expand...
Click to collapse
Can you please tell the complete error Sir? It might show some status error.
Cheers,
AJ
Related
First: the phone was rooted long ago succesfully - thats not the problem
i think i kinda f***** it up by trying to install feralab v14 custom rom over cyanogen 7 without performing cleaning, backup, putting a new kernel or firmware(dont know if i even need to do it). I've searched the forums far and wide, found nothing but dead links.
flashtool doesnt recognize the device(green light is on when i hold back and connect), s1tool doesnt recognize it... i cant enter bootloader i cant basically do anything with it.. can someone please help me?
Hi,
Are u on locked bootloader or unlocked one ?
Do u run Flashtool with admin rights if u use windows ?
Do u have the latest version of Flashtool ?
Do u have all the drivers installed for your device ?
Do u try PCC to go back to Stock Rom ?
a reply?
9andar said:
Hi,
Are u on locked bootloader or unlocked one ?
Do u run Flashtool with admin rights if u use windows ?
Do u have the latest version of Flashtool ?
Do u have all the drivers installed for your device ?
Do u try PCC to go back to Stock Rom ?
Click to expand...
Click to collapse
i believe unlocked one, i was unable to check
i have xp sp3 idk how to
nope 0.2.5 latest version had some java error
i believe not i dont know how to install them i downloaded a ton of them
i dont know how
Woawww, with this ton of i don't know, it will be hard to help u...
First let's try with PC Companion (PCC) .. use the link in my signature "How to use PC Companion"...
To have it google is your friend it's the official app from Sony Ericsson
..
i already have pcc i will now take a look at the manual
edit btw i just flashed it with 2.1 firmware
roby00231 said:
i already have pcc i will now take a look at the manual
Click to expand...
Click to collapse
did u try latest flashtool V 0.6.9.1 ??
FIND IT HERE
..
i will if this doesnt succeed so far looking good, its downloading and installing stock rom
Once you're on StockRom, use flashtool to root...
If you are on 2.1 stock rom use flashtool to install a 2.3 stock rom, once you did it unlock your bootloader and install a kernel with his wifi module... Then you're ready to install FeraLab v14 or another rom...
..
9andar said:
Once you're on StockRom, use flashtool to root...
If you are on 2.1 stock rom use flashtool to install a 2.3 stock rom, once you did it unlock your bootloader and install a kernel with his wifi module... Then you're ready to install FeraLab v14 or another rom...
Click to expand...
Click to collapse
my phone was already rooted, do i need to root it again?
II may need some directions about unlocking bootloader and installing kernel and stuff..
and is xrecovery erased by this?
edit : Xperia X10 was updated with 3.0.1.G.0.75.
So now you are on 2.3.3...
You have to root again your phone...
Use the last version of flashtool...
And the guide by Crowds (It's in my signature "How to use Flashtool by Crowds")...
All is explained for all the stuff... Installation of Flashtool, the drivers needed, the rooting process, the unlocked bootloader process...
Once all is done, install a kernel (It's a .tft file) with flashtool (DooMKerneL, Thgo kernel, KCkernel... )
Don't forget it's wifi module (it's a zip file to copy on sdcard and install via recovery)...
Then, copy the rom you want on sd card and install it via recovery
9andar said:
So now you are on 2.3.3...
You have to root again your phone...
Use the last version of flashtool...
And the guide by Crowds (It's in my signature "How to use Flashtool by Crowds")...
All is explained for all the stuff... Installation of Flashtool, the drivers needed, the rooting process, the unlocked bootloader process...
Once all is done, install a kernel (It's a .tft file) with flashtool (DooMKerneL, Thgo kernel, KCkernel... )
Don't forget it's wifi module (it's a zip file to copy on sdcard and install via recovery)...
Then, copy the rom you want on sd card and install it via recovery
Click to expand...
Click to collapse
Good job , I'm glad there are members like you that take time to help other members.
Rom: feralab volt v14
kernel: doom v06
rocking the unlocked bootloader,using xda premium app.
No prob, man, it's the XDA forum...
There is a lot of members who takes time to help and we're happy when a pb is fixed...
Enjoy your X10 now.... ;-)
EDIT : You can change the title and put [FIXED] or [SOLVED] it might help others who have the same pb....
uot
dont mind me asking but whats uot kitchen?
edit: thanks for all ur help i fixed everything, rooted it, unlocked bootloader, and installed doomkernel and feralab v14 and its all working perfectly
also stuck at sony ericcson text
i was trying to flash feralab 14.2 and got stuck after the rom installed. i changed all settings the way i wanted and have an unlocked bootloader. but i got stuck after the reboot and the pc companion keeps telling me there is no software for my x10 so repair mode won't finish. what do i do? problem
fixed. had to flash stock 2.3 ftf. flashtool wouldn't allow me to flack 2.1 stock.
Hy gus
I have a similar problem and i tried to follow the pdf that was provided but when i do i boot into xrecover 0.3.
info as follows:
Are u on locked bootloader or unlocked one ? AFAIK it was
Do u run Flashtool with admin rights if u use windows ? yes
Do u have the latest version of Flashtool ? yes 0.0.9
Do u have all the drivers installed for your device ? yes
Do u try PCC to go back to Stock Rom ? busy downloading now to try fix but i can't put into "download mode" so not sure what to do there.
Any thanks would be appreciated
Random_Sheep said:
Hy gus
I have a similar problem and i tried to follow the pdf that was provided but when i do i boot into xrecover 0.3.
info as follows:
Are u on locked bootloader or unlocked one ? AFAIK it was
Do u run Flashtool with admin rights if u use windows ? yes
Do u have the latest version of Flashtool ? yes 0.0.9
Do u have all the drivers installed for your device ? yes
Do u try PCC to go back to Stock Rom ? busy downloading now to try fix but i can't put into "download mode" so not sure what to do there.
Any thanks would be appreciated
Click to expand...
Click to collapse
Buy download mode do you mean flash mode? Flashmode = phone off & unplugged, then while holding the back button plug in usb to pc. Should only get green led, no screen.
~Jaramie
from my LT28at rooted & eating an Ice Cream Sandwich
I have Xperia Neo v MT11i
I have created backup using CMW of android 4.0.3 ICS version after updating through flashing ....
today I, reflashed to android 2.3.4 GB , unfortunately after installing CMW again now I restored the same backup that I created of ICS version using CMW .... now my phone just stops at SONY ERICSSON logo, ....... I think it is bricked now........
I have unlocked bootloader
Please help to unbrick.....
things i have these things with me.......
1. Flash tool
2. NeoV.4.0.2.A.0.62.ftf .........(GB)
3. MT11i_4.1.A.0.562_Nordic_1253-1755.ftf ......(ICS)
4. CMW recovery image to boot into CMW recovery.
5. Backup made with CMW with ICS version.
WHAT I HAVE TRIED....
1. flashing both GB and ICS version using flash tool, but gets error as ......Error flashing. Aborted
2. formating systen, data, cache, within recovery options of CMW recovery.... still nothing good....
Please help .....
1) it's CWM not CMW
2) cwm recovery doesn't contain kernel
4) ICS can't work on GB kernel
5) solution: use ICS kernel when you're using ICS CWM backup
mangatparamveer said:
WHAT I HAVE TRIED....
1. flashing both GB and ICS version using flash tool, but gets error as ......Error flashing. Aborted
Click to expand...
Click to collapse
Regarding this problem, first you said you flashed GB and now you say you got error, how is that?
For flashing ICS .ftf use latest flashtool and tick no final data verification option, or something like that.
If you have problem flashing GB .ftf, using latest flashtool, then use some older version.
I meant that after bricking my phone, i just tried to re-flash GB or ICS to unbrick, and now flashing does not occur successfully but ends with error.
mangatparamveer said:
I meant that after bricking my phone, i just tried to re-flash GB or ICS to unbrick, and now flashing does not occur successfully but ends with error.
Click to expand...
Click to collapse
Read what I wrote above.
And give us a bit more info.
What flashtool version are u using, what OS are u using. What error do you get,log file.
Tried downloading older version of flashtool?
extract kernel.sin file from MT11i_4.1.A.0.562_Nordic_1253-1755.ftf
connect phone with fastboot mode to pc
then you have to run fastboot.exe from FlashTool\x10flasher_lib\fastboot.exe
flash kernel.sin via this command
fastboot flash boot kernel.sin
Good news
I managed to reinstall android ICS, before that i tried Wostan X tool Unlock, upto the point where it showed that you have not enough credits. then i retried Flashtool and got ICS installed. now phone runs ICS successfully.
Now a new problem arrived...... Now I cannot connect phone in fast boot mode...... also my adb drivers are gone...... Please help
First you said you have unlocked BL, and now you tried to use wotan tool for unlock, why?
How did you unlock your bootloader?
And regard your driver problem, install drivers from flashtool folder.
And no need to write with that over sized colored text.
I have unlocked bootloader 2 months ago using sony bootloader unlock service...
one other problem I have not mentioned earlier is that phone does not detect SIM card, i have tried 3 other SIM cards also
also by opening service menu in *#*#7378423#*#* --> configuration --> Bootloader unlock allowed: No . earlier it shows yes as i have unlocked it before.
That unlockx is a nasty bit of software, if you try to unlock without credits, it cripples your phone trying to force a sale.
Download s1tool use the restore button, this will fix the sim issue. Then unlock via the Sony method as you used originally.
Sent from my MT11i using Tapatalk
I have downloaded setool, but it does not shows MT11 in phone type..... then how to use setool? more over i can't run phone in fastboot mode now, only flash mode is possible.
Must be s,1tool not setool
You have to install the zeus drivers, and touch the testpoint, it should detect it as Zeus flash device, then use restore.
Sent from my MT11i using Tapatalk
Please provide me a working download link for s1 tool. i tried but can't find any proper download link.
mangatparamveer said:
Please provide me a working download link for s1 tool. i tried but can't find any proper download link.
Click to expand...
Click to collapse
http://www.4shared.com/archive/xjhXIDXh/s1tool.html
THANKS
thanks Madfysh for providing the link
thanks mpiekp for your suggestion to use s1 tool.
Finally s1 tool helped me to remove SIM LOCK CERTIFICATE from the mobile.
NOW my phone problems are completly solved.
Thanks again to all here.
Glad your sorted, I despise the methods some will use to generate income.
Sent from my MT11i using Tapatalk
can you explain how did it
i have downloaded s1tool but i didnt understand how to use it,
i have flashed ICS to neo its works fine simlocked, you have succeed and pls can you tell us how to use s1tool and how to solved simlock problem
thanks
http://forum.xda-developers.com/showthread.php?t=1598160
try this one dude
hope it would help you
HI guys!!
I am a complete noob in unlock bootloader
now i own a ROOT xperia x10.
PURE ROOT. dont hav anythings change yet
baseband 2.1.71
kernal :2.6.29-00054-g5f01537 [email protected]#1
built number : 3.0.1.G.0.75
Xrecovery: havent install...
now is my question, which step should i do first if i want to unlock my x10 bootloader...
someone help please...
i really feel so helpless now....
please dont scold me...
i hope u guys can provide me the details... =)
THANK YOU YOU ALL... PLEASE HELP ME :crying:
How to Root and unlock the bootloader of Sony Ericsson your Xperia x10
Disclaimer: I nor xda-developers.com bear no responsibility for your phone.(this phone is not bricked easy so don't worry if anything goes wrong you could just flash a new stock 2.3.3 with flashtools)
1.download latest flashtools from here if not already done so: http://androxyde.github.com/Flashtool/
2.Go here And the and download kernel upgrade and downgrade
http://forum.xda-developers.com/showthread.php?t=1254087
3. On your phone go to setting>applacations>unknown sources and usb debugging in development and connect your phone to your computer with your data cable.
4. root would now become available in flashtools so press it(the unlocked lock ICON) and just wait for flashtools to reboot your phone. and you now have root access!
Installing a Recovery
In order to install a new Rom you would have to install a Recovery, if you already see one you want check to see if they need a CWM(CWM5 in flashtools) of just flash through Xrecovery(0.3 in flashtools)
So in order to install on you much have your phone connected and on flashtools click on the black square with a white cross in it and choose according.
Bootloader Unlocking.
5.unplug your phone and power it off. On the top bar in flashtools plugins should now be available with the "Unlocked bootloader" option, so press it and wait until it says to connect your phone then do so by holding down your back button(on your phone) and plugging in your USB cable(don't let go until you see your notifications light come on GREEN
6. While the unlocking is taking place look out for the "you can now unplug and turn on device, then plug it again" do it one time and just leave it to finish and say "successfully applied unlock. Rebooting
7. Smile because you can now flash custom kernel and so forth and so on.
thank you!!!!! =D u save my life!!! =D
now i have another question...
if i wanna flash kernel from domlord...
should i downgrade my phone via azuzu downgrade method??
kanglee123 said:
thank you!!!!! =D u save my life!!! =D
now i have another question...
if i wanna flash kernel from domlord...
should i downgrade my phone via azuzu downgrade method??
Click to expand...
Click to collapse
Hi, no need downgrade and upgrade kernel are just for easing rooting and bootloader unlocking processes to be done. So since ya want to flash custom kernels, no need to upgrade/downgrade anymore. Just place your kernel ftf under firmware folder of flashtool, then flash it via flashtool. But doomlord kernel got two versions: lockedbootloader (flash via xrecovery) and unlocked bootloader(flash via flashtool) Hope helps. Goodluck
Whitefang
THANKS AGAIN!!
Whitefang, sorry that i am really completely noob in this
now i am still lock bootloader, and i have downloaded domlord kernel file,which is a zip file(for 2.3.3 lock bootloader)
so..can u explain more details to me about what should i do now?
can explain step by step ? please..
i know i should put the zip file to my sd card
after that ? how? i m using zdzihu Xrecovery..
kanglee123 said:
THANKS AGAIN!!
Whitefang, sorry that i am really completely noob in this
now i am still lock bootloader, and i have downloaded domlord kernel file,which is a zip file(for 2.3.3 lock bootloader)
so..can u explain more details to me about what should i do now?
can explain step by step ? please..
i know i should put the zip file to my sd card
after that ? how? i m using zdzihu Xrecovery..
Click to expand...
Click to collapse
If your xrecovery working for flashing..just flash the zip of kernel. You might get "installation aborted" but nevermind, just reboot phone. When ya see another xperia boot logo, that means your kernel has changed done . Btw, optimal oc doomkernel preffered is 1113MHz, keep it in mind okay cheers
Whitefang
thx again!! so it means that after i had put the zip file into my sd card,
i should reboot n go in recovery mode
then choose the "install custom zip" ?
kanglee123 said:
thx again!! so it means that after i had put the zip file into my sd card,
i should reboot n go in recovery mode
then choose the "install custom zip" ?
Click to expand...
Click to collapse
Yeap ya in the right path cheers
Whitefang
ghlople and
than you again !!! whitefang
help me for next one ><
i wanna use that X10s room(port xperia s to x10)
do u know about it ???
i follow a thread that saying that i just need to download the backup file from the post
and then i reboot in flashmode and restored the file that i downloaded
is it correct ? i am still a lock bootloader...
the post is here
http://forum.xda-developers.com/showpost.php?p=29106815&postcount=3239
thank you =D
kanglee123 said:
than you again !!! whitefang
help me for next one ><
i wanna use that X10s room(port xperia s to x10)
do u know about it ???
i follow a thread that saying that i just need to download the backup file from the post
and then i reboot in flashmode and restored the file that i downloaded
is it correct ? i am still a lock bootloader...
the post is here
http://forum.xda-developers.com/showpost.php?p=29106815&postcount=3239
thank you =D
Click to expand...
Click to collapse
For that just put the extacted download file into xrecovery/backups in your sd card and in xrecicer hit backup and restore and find the restore of that rom ends with a 31 I think hope helps!!!
Sent from my X10i using xda premium
kanglee123 said:
than you again !!! whitefang
help me for next one ><
i wanna use that X10s room(port xperia s to x10)
do u know about it ???
i follow a thread that saying that i just need to download the backup file from the post
and then i reboot in flashmode and restored the file that i downloaded
is it correct ? i am still a lock bootloader...
the post is here
http://forum.xda-developers.com/showpost.php?p=29106815&postcount=3239
thank you =D
Click to expand...
Click to collapse
I used v8 before, not v9 but i analysed the method
Yeah, download and extract the zip properly like tof37 senior said, name it and place it in right directory in ya sdcard.
Then get xrecovery mode and use "backup and restore" command then find ya folder then confirm, and let the restore done. Then, reboot and enjoy goodluck
Whitefang
thank for u two helps!! =D
now my phone is running on xperia s port !! =D
i hope in future i have question again ,
u guys can help me again =D
i just want to know why no one is interesting in doing one-step unlock program
hi everyone, i had try to install cyanogenmod 11 by percyg2 but i cant flash it.. it says status error 7.
also i flashed the kernel but when i choose boot with that kernel using fastboot it says that my device must be rooted.. (
BTW. i'm rooted and unlocked bootloader but i dont know why sony pc companion recognize my device as lt22 (xperia)
P.S. i had cyanogenmod by percyg2 time ago, but i dont know what's happening with my device
Is your phone lt22? If it isn't, then I don't know
If it's lt22, the start pc companion select support zone, and repair my phone or somthing similar, this will restore your phone like it just came from factory
Sent from my ST25i using Tapatalk
fr4nk32 said:
hi everyone, i had try to install cyanogenmod 11 by percyg2 but i cant flash it.. it says status error 7.
also i flashed the kernel but when i choose boot with that kernel using fastboot it says that my device must be rooted.. (
BTW. i'm rooted and unlocked bootloader but i dont know why sony pc companion recognize my device as lt22 (xperia)
P.S. i had cyanogenmod by percyg2 time ago, but i dont know what's happening with my device
Click to expand...
Click to collapse
How did you have CM if your bootloader is not unlocked?
ChikeD said:
How did you have CM if your bootloader is not unlocked?
Click to expand...
Click to collapse
my bootloader is unblocked, but i think there is a kind of error in the phone.. i had unblock my bootloader and install cyanogenmod last year around on december when cyanogenmod 11 by percyg2 just arrive (i think) so i unblock my bootloader and install cm11 but it has many bugs that was a nightly yet so i decided to back to stock until it become stable.. now is almost stable ( i think) so i decided to download it again and try to install it but i cant, i just dont know why.. so i check with sony pc companion and it says i have xperia p but before it don recognized it.. so? then i decided to unblock the bootloader again first by flashtool then by cmd command fastboot both said the same the bootloader is unlocked; so i rooted again and install CWM recovery but when i try to install it goes to error status 7.. then i check again with sony pc companion and says i have an xperia p lt22 but i dont get it.. why is happening this? :crying:
yousefs said:
Is your phone lt22? If it isn't, then I don't know
If it's lt22, the start pc companion select support zone, and repair my phone or somthing similar, this will restore your phone like it just came from factory
Sent from my ST25i using Tapatalk
Click to expand...
Click to collapse
thanks for answering but that's not the problem.. the problem is pc companion recognize my phone but my bootloader is unblocked.. ? maybe is that why i cant install AOSP roms now but i had install before, last year i installed cm11 and cm10.3.. dont know what happend with the phone
fr4nk32 said:
thanks for answering but that's not the problem.. the problem is pc companion recognize my phone but my bootloader is unblocked.. ? maybe is that why i cant install AOSP roms now but i had install before, last year i installed cm11 and cm10.3.. dont know what happend with the phone
Click to expand...
Click to collapse
Look i'm not so expirment but I think whatever happened to your device it can be repaired, I guess Flashtool would help you Lock bootloader or flash cutom Rom or whatever I just don't know
Sent from my ST25i using Tapatalk
@fr4nk32
Recheck in service menu if it's unlocked or not
ChikeD said:
@fr4nk32
Recheck in service menu if it's unlocked or not
Click to expand...
Click to collapse
i'm telling you believe me i have my bootloader unlocked, take a look.
please, check this out too
fr4nk32 said:
please, check this out too
Click to expand...
Click to collapse
just fastboot the boot.img that was in the CM11 ROM
enter recovery then factory reset, install ROM and g-apps
http://www.youtube.com/watch?v=QW1znjDLe-k
This happened for me, and i found this video, than it's ok.
When flashing gapps, it can say status7, don't matter, it says but flashes the gapps.
Rycon33 said:
just fastboot the boot.img that was in the CM11 ROM
enter recovery then factory reset, install ROM and g-apps
Click to expand...
Click to collapse
i had flashed the boot.img but when i try to hotboot it says error and the phone goes to reboot
fr4nk32 said:
i had flashed the boot.img but when i try to hotboot it says error and the phone goes to reboot
Click to expand...
Click to collapse
no need to "hot" boot(it doesn't work that way now), you need fastboot flash boot boot.img, fastboot reboot, then on first vibrate you press power button to enter recovery
Rycon33 said:
no need to "hot" boot(it doesn't work that way now), you need fastboot flash boot boot.img, fastboot reboot, then on first vibrate you press power button to enter recovery
Click to expand...
Click to collapse
i had install cyanogenmod before and i know how to install and i dont know what was the problem.. but now looks like the problem is gone, i tried again andi t works i enter to recovery so i flash the rom and voila .. thanks to y'al for answering
BTW: which one is the best kitkat rom for xperia P? cyanogenmod, hellkat or paranoid?
fr4nk32 said:
i had install cyanogenmod before and i know how to install and i dont know what was the problem.. but now looks like the problem is gone, i tried again andi t works i enter to recovery so i flash the rom and voila .. thanks to y'al for answering
BTW: which one is the best kitkat rom for xperia P? cyanogenmod, hellkat or paranoid?
Click to expand...
Click to collapse
good that it's finally working now on your phone
i'm switching back and forth with CM11 and Paranoid Android. Personally, I stay longer with PA because of Halo, although the ROM hasn't been updated for awhile now.
Im the most stupid person alive because
I didn't unlock my bootloader
I installed xzrecovery witch is a app that installs twrp
Then in twrp i wiped every thing
Then I tried to install a rom witch didn't work
Then i trend the phone off when i tried to do so twrp said your device is not rooted do you want to install super su i said yes the phone is now stuck on sony logo
Pliz help
aliamiri70007 said:
Im the most stupid person alive because
I didn't unlock my bootloader
I installed xzrecovery witch is a app that installs twrp
Then in twrp i wiped every thing
Then I tried to install a rom witch didn't work
Then i trend the phone off when i tried to do so twrp said your device is not rooted do you want to install super su i said yes the phone is now stuck on sony logo
Pliz help
Click to expand...
Click to collapse
You wiped everything and now there is no rom installed so its not going past the sony logo. You have two options.
1. Unlock bootloader if you want to run a custom rom.
2. Flash stock rom to go back to stock.
and how to flash stock rom , you need to have the flashtool , put your phone in donwloadmode ( volumne down + plug in the usb cable ) and then flash the stock rom of sony ( you can find the method on how to do it on google ) its simple and then you decide out of 2 options above from last post
Since your bootloader isn't unlocked your can use Sony Companion Software to repair your phone. When you click update there is a repair option. Select repair and hook up the phone in flashmode. Make sure your ZU is atleast 50% charged.
thanks for replying everyone i tried the flashtool stock rom installation and i got boot loop now i tried two different ftf files but they both result in boot loop what am i doing wrong?
aliamiri70007 said:
thanks for replying everyone i tried the flashtool stock rom installation and i got boot loop now i tried two different ftf files but they both result in boot loop what am i doing wrong?
Click to expand...
Click to collapse
can you flash the stock rom again and copy paste the log here in a code quote like this one:
Code:
write here
And what is your model? C6833 etc..
What stock rom did you download?
Which drivers did you use?
And which version of flashtool did you use?
And lastly what settings did you use when flashing the stock rom? All options included so ALL partitions being flashed. And none excluded.
Screenshots is always good help .
for locked bootloader http://support.sonymobile.com/fr/xperia-companion/
for unlocked bootloader https://developer.sonymobile.com/open-devices/flash-tool/
Thanks I didn't check the wipe section wich causes bootloader thanks again to everyone who helped
aliamiri70007 said:
Thanks I didn't check the wipe section wich causes bootloader thanks again to everyone who helped
Click to expand...
Click to collapse
You're welcome