Related
Ok guys, I didnt think I would end up in this boat but I did So I am still on GB Firmware (.11), nandroided back to stock rom with SU installed. Downloaded 3.14 RUU to flash after s-off, downloaded controlbear for GB (windows), downloaded latest amon ra recovery and whatever else was needed. So phone is on, in usb debug, then I start controlbear, runs through its thing, reboots the phone to the juopunutbear screen and asks for the wire trick, I tried for about half an hour and it would reboot when i got the timing right but the went to the "taking another sip" or whatever it says and then error, still sober. I just want to make sure I have everything correct and if not, what i'm doing wrong. I have been reading all the guides for the last month over and over preparing for this so I was comfortable. I got back to fastboot, flashed amon ra and nandroid back to nils business ICS so my phone is back in working condition. Any help would be appreciated. I looked around some, but I was hoping some direct help would make it easier.
Thanks in advance
Cameron
Honestly I would try a different computer if you have one.
con247 said:
Honestly I would try a different computer if you have one.
Click to expand...
Click to collapse
Thanks for the quick reply. I'll give that a shot tomorrow. Only my laptop has adb working at the moment. Does everything else seem to be fine?
usually the issue is with the computer and not the phone.
Another question. If it fails, and leaves the phone on the juopunutbear screen, I can still restart control bear with the phone on that screen right? When i do, it gets back to wire trick and reboots and fails again.
I switched computers and that worked second try. Thanks so much Con!!!!
Edit: Everything is running great. Updated to latest leak, amon ra recovery, and flashing Ineffabilis Deus right now. Was really hoping for Joel to have Charmander uploaded tonight, but oh well. I've asked for enough already lol. Thanks again Con
Evocm7 said:
I switched computers and that worked second try. Thanks so much Con!!!!
Edit: Everything is running great. Updated to latest leak, amon ra recovery, and flashing Ineffabilis Deus right now. Was really hoping for Joel to have Charmander uploaded tonight, but oh well. I've asked for enough already lol. Thanks again Con
Click to expand...
Click to collapse
Hi!I want to s-off and root my sensation.I am a noob when it comes to this.Can you give me your facebook account or your email(if you want you can write here) so that you can guide me through the process of rooting and gaining s-off on my sensation.Please reply soon
htc ruby S-Off failed
i tried to s-off my htc amaze with juopuntbear method using ubuntu but it didn't work for me and now my mobile is struck on juopuntbear screen and wont start. could anyone please help. i'm on GB rom with HTCDev unlocked. :crying:
razishaw said:
i tried to s-off my htc amaze with juopuntbear method using ubuntu but it didn't work for me and now my mobile is struck on juopuntbear screen and wont start. could anyone please help. i'm on GB rom with HTCDev unlocked. :crying:
Click to expand...
Click to collapse
If the Htc amaze is like the Rezound you should be able to fastboot flash the stock boot.img from the rom you are on and it should get you back booting.
I've got an Amaze 4G on Wind Mobile. My brother and I recently tried upgrading it to ICS. We followed numerous sets of instructions, flashing a recovery, a new version of hboot, s-offing the phone, changing the SuperCID and flashing an ICS ROM. We originally tried Android Revolution HD, but the phone always got stuck at the HTC logo and wouldn't boot up.
After a few hours of searching the forums and trying various things, we finally got the Energy ROM version 5/1 installed, after changing the SuperCID back to the Wind default (globa001 I think). We figured it was an issue with the Revolution ROM, but when I tried upgrading to Energy 5/6, I ran into the same issue.
I have searched the forums and found numerous people with the same problem, but I have not found a solution. I spent all night flashing ROMs and trying various things and I finally got it to go to the Energy boot animation, but it would just sit there and do nothing (I left it a good half hour). The next morning I tried installing Speed Rom with the SuperCID 11111111 and it worked. However, I had tried the same thing the night before, so I'm not sure what changed.
I'm not happy with Speed and would like to go back to Energy, but I'm worried it will brick my phone again.
I am currently using the TWRP recovery, but I used 4ext before with the same result. My firmware versions are as follows:
RUBY PVT SHIP S-OFF RL
HBOOT-1.93.0002
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
Any help would be very much appreciated.
acc3ssd said:
I've got an Amaze 4G on Wind Mobile. My brother and I recently tried upgrading it to ICS. We followed numerous sets of instructions, flashing a recovery, a new version of hboot, s-offing the phone, changing the SuperCID and flashing an ICS ROM. We originally tried Android Revolution HD, but the phone always got stuck at the HTC logo and wouldn't boot up.
After a few hours of searching the forums and trying various things, we finally got the Energy ROM version 5/1 installed, after changing the SuperCID back to the Wind default (globa001 I think). We figured it was an issue with the Revolution ROM, but when I tried upgrading to Energy 5/6, I ran into the same issue.
I have searched the forums and found numerous people with the same problem, but I have not found a solution. I spent all night flashing ROMs and trying various things and I finally got it to go to the Energy boot animation, but it would just sit there and do nothing (I left it a good half hour). The next morning I tried installing Speed Rom with the SuperCID 11111111 and it worked. However, I had tried the same thing the night before, so I'm not sure what changed.
I'm not happy with Speed and would like to go back to Energy, but I'm worried it will brick my phone again.
I am currently using the TWRP recovery, but I used 4ext before with the same result. My firmware versions are as follows:
RUBY PVT SHIP S-OFF RL
HBOOT-1.93.0002
OpenADSP-v02.6.0.2226.00.0202
eMMC-boot
Any help would be very much appreciated.
Click to expand...
Click to collapse
ok, well if your on wind mobile you want to use super cid.
but heres what i think the problem is, you didnt mention anything about wiping. try flashing the superwipe.zip before flashing roms. and always have a nandroid of a working rom. or else you may get stuck....
if you need anymore help, i will be watching this thread
Sorry, I forgot to mention that. I used superwipe and tried the various wipe options in the recovery, with the same result.
I'll definitely look into nandroid before I try installing another rom ;-)
I'd advise switching back to 4EXT recovery, makes flashing easier, trust me. Now update your phone to stock ICS, install 4EXT recovery then format all partitions except sd then install the ROM of your choice.
Before installing ICS you'll need to flash GB stock from WIND, then update to ICS via either OTA or directly on the phone via OTA. Then do what I said above, let us know what happens.
yeah like dark said above me, use 4ext. it makes flashing easier.
ziggy46 said:
yeah like dark said above me, use 4ext. it makes flashing easier.
Click to expand...
Click to collapse
Damn thanks limit, lol. +ziggy.
Dark Nightmare said:
Damn thanks limit, lol. +ziggy.
Click to expand...
Click to collapse
haha they should make it like 12 max
ziggy46 said:
haha they should make it like 12 max
Click to expand...
Click to collapse
The app has no limits, gonna switch to that in a sec, I already gave out like 30 thanks for today, therefore no limits would be awesome, just people might abuse it, smh.
Dark Nightmare said:
I'd advise switching back to 4EXT recovery, makes flashing easier, trust me. Now update your phone to stock ICS, install 4EXT recovery then format all partitions except sd then install the ROM of your choice.
Before installing ICS you'll need to flash GB stock from WIND, then update to ICS via either OTA or directly on the phone via OTA. Then do what I said above, let us know what happens.
Click to expand...
Click to collapse
Thanks for your help everyone. I'm a little confused about how to proceed though. I downloaded the stock Wind ruu.exe file from the forums, but I'm not sure what to do with it. I'm running Linux, so I can't execute the file. Is there any way to flash it without a Windows machine?
Also, do I need to relock my bootloader and go through the whole s-off procedure again, or can I simply downgrade to GB and upgrade back to ICS again without going through all those steps?
acc3ssd said:
Thanks for your help everyone. I'm a little confused about how to proceed though. I downloaded the stock Wind ruu.exe file from the forums, but I'm not sure what to do with it. I'm running Linux, so I can't execute the file. Is there any way to flash it without a Windows machine?
Also, do I need to relock my bootloader and go through the whole s-off procedure again, or can I simply downgrade to GB and upgrade back to ICS again without going through all those steps?
Click to expand...
Click to collapse
You need windows to flash it.
acc3ssd said:
Thanks for your help everyone. I'm a little confused about how to proceed though. I downloaded the stock Wind ruu.exe file from the forums, but I'm not sure what to do with it. I'm running Linux, so I can't execute the file. Is there any way to flash it without a Windows machine?
Also, do I need to relock my bootloader and go through the whole s-off procedure again, or can I simply downgrade to GB and upgrade back to ICS again without going through all those steps?
Click to expand...
Click to collapse
Once you're s-off once, you'll always be s-off unless you s-on again, to use the windows file your best option would be to use WINE. Which I figure you should be know how to use.
Dark Nightmare said:
I'd advise switching back to 4EXT recovery, makes flashing easier, trust me. Now update your phone to stock ICS, install 4EXT recovery then format all partitions except sd then install the ROM of your choice.
Before installing ICS you'll need to flash GB stock from WIND, then update to ICS via either OTA or directly on the phone via OTA. Then do what I said above, let us know what happens.
Click to expand...
Click to collapse
Thanks again for your help. I followed your instructions: Downgraded to GB, flashed the Wind ICS OTA, install 4ext recover, ran superwipe and formatted everything except the SD card, and then flashed Energy 6/6. It got past the HTC screen, but got stuck on the Energy boot animation.
Do you have any other suggestions?
acc3ssd said:
Thanks again for your help. I followed your instructions: Downgraded to GB, flashed the Wind ICS OTA, install 4ext recover, ran superwipe and formatted everything except the SD card, and then flashed Energy 6/6. It got past the HTC screen, but got stuck on the Energy boot animation.
Do you have any other suggestions?
Click to expand...
Click to collapse
flash the kernel from his 3rd post on energy rom
also you did flash the PH85IMG.zip on his downloads ya ?
Jay_Rulen said:
flash the kernel from his 3rd post on energy rom
also you did flash the PH85IMG.zip on his downloads ya ?
Click to expand...
Click to collapse
And did you wait a bit? First boot usually takes a while.
Sent from an Amaaaaaazing place :-D
Dark Nightmare said:
And did you wait a bit? First boot usually takes a while.
Click to expand...
Click to collapse
I waited at least half an hour, took out the battery and tried again to no avail.
Jay_Rulen said:
flash the kernel from his 3rd post on energy rom
also you did flash the PH85IMG.zip on his downloads ya ?
Click to expand...
Click to collapse
Is that an Energy ROM image?
acc3ssd said:
Is that an Energy ROM image?
Click to expand...
Click to collapse
Yes it is.
Sent from an Amaaaaaazing place :-D
Same issue
I'm doing the same and I need help
I'm trying to get the latest EnergyRom. I was using the GB EnergyRom before and finally made it to the T-Mobile Stock ICS rom using fastboot instructions from here: androidforums.com/rezound-all-things-root/535820-how-easier-way-flash-ph98img-files.html using the this ruu. [bravo.d-h.st/z70?key=1340081175
Right now I don't se any S-On instructions for Energy rom, though I do see one for Android Revolution HD. I need to get CWM re-installed as that was lost. Do I need S-Off to get Energy Rom?
How do I get the latest Energry rom installed?
Dark Nightmare said:
Yes it is.
Sent from an Amaaaaaazing place :-D
Click to expand...
Click to collapse
Yes, that's the one I installed. What will the other kernel do?
Sent from my HTC Amaze 4G using Tapatalk 2
acc3ssd said:
Yes, that's the one I installed. What will the other kernel do?
Sent from my HTC Amaze 4G using Tapatalk 2
Click to expand...
Click to collapse
It's the kernel he built his rom on, so requires it to work properly.
hey i've never rooted a phone before and i'm having a hard time finding out how to do this,,
i have the shooter_u, s-on, hboot 1.53.0007, eMMC-boot, RADIO-11.25.3504.06_M.
is there a way to root it, if not when will it be possible and is there anything else i can do with it like flash custom ROM etc? :fingers-crossed:
htcdev
go to htcdev(dot)com/bootloader/ and click on the right "Begin Unlock Bootloader"
u will need to register.. imput some random information all will be ok
and just follow the steps its easy..
I found this in the GSM development stickies:
http://forum.xda-developers.com/showthread.php?t=1248231
Sent from my ICS 3VO with Tapatalk 2
shiki0 said:
go to htcdev(dot)com/bootloader/ and click on the right "Begin Unlock Bootloader"
u will need to register.. imput some random information all will be ok
and just follow the steps its easy..
Click to expand...
Click to collapse
Now you only unlocked the bootloader, which is not rooting.
OP.
After you did the above, you have to flash a custom recovery and flash superuser 3.x.x for ICS.
Look around, plenty of topics that answer your question.
Sent from my Evo 3D GSM using xda premium
thanks alot, got to root my evo 3d using recovery with s-on and 1.53.007, now got supersu and am able to download root apps; anyways will i be able to download any kernel and rom now ?
killer132 said:
thanks alot, got to root my evo 3d using recovery with s-on and 1.53.007, now got supersu and am able to download root apps; anyways will i be able to download any kernel and rom now ?
Click to expand...
Click to collapse
The only issue with s-on is that the ICS ROMs tend to bootloop for most people. I recommend you get s-off. See the stickies in the Evo3d GSM development thread for more help with that.
coal686 said:
The only issue with s-on is that the ICS ROMs tend to bootloop for most people. I recommend you get s-off. See the stickies in the Evo3d GSM development thread for more help with that.
Click to expand...
Click to collapse
Hey, i've got a major problem with the mwakious3Drom® rom, i followed the wrong steps and installed the newest version straight away through recovery, and now when i turn on the evo 3d it stays on the white screen with green letters 'HTC' forever, it never goes off.
i've tried factory reset but it's of no use; also tried restoring it through a nandroid backup i think, through recovery from jus tafter i rooted but it takes long on the 'restoring boot image' part and once that part's done the other things take place except for 'ext-sdcard' or something, ]it still dosen't work and stays on htc logo when turned on.
I thought i may be able to install a different ROM so i downloaded evolver3D2.3, however when conencted through usb cable from evo 3d to the pc, the 'removable disk (j' shows up but when clicked on it replies ' please insert a disk into removable disk(j', it dosen't let me go onto my sdcard so i cant copy the files.
When i go onto fastboot and have the usb connected the 'fastboot usb' does show up on the 3d so there's still hope i can do something from there but i really don't know where to start and i'm afraid if i've bricked it; have i or is it fixable?
Please, please help me, i would be so grateful
edit : btw, i have the anryl kernel 30.09 if this could be helpful.
First dont worry everything is fixable at xda second i will try to help u as much as i can if ur memory card isnt readable anymore , put mwakious 3D rom 11 the base one on another sd card and boot into recovery and do a full wipe and flash it and to flash thr patches make a full boot then reboot to recovery wipe cache and dalvik cache and flash the update i rly dont know what happened to that sd card and if that didnt work search for OTA ics ruu and flash it in bootloader and then s-off that hboot 1.53.007 trust me its easy and its way easier to flash roms and to avoid bootloops
Hit the thanks button if i helped
Sent from my HTC EVO 3D X515m using xda premium
If you can remove the sd card and plug it in to your computer directly, you can check to make sure it is working properly (and copy the ROM over at the same time). If you can boot into recovery from fastboot, then you can flash the ROM. If not, you'll have to push a new recovery through your computer.
Save the Drama for your Mama with Tapatalk 2
This should work perfect on GSM http://forum.xda-developers.com/showthread.php?p=29543533#post29543533
Click thanks if i helped !!
hey guys, i fixed the problem by popping the sdcard in a blackberry and connecting it, afer a while it started to work so i installed the evolver32 rom. anyways it was workng perfectly BUT wifi dosen't work. so i thought wifi may not work only on that rom, however i installed the mwakious3Drom® rom and when i click wifi it says error and theres no wifi connection.. could this be due to me not getting s-off or do they just do that on 1.53.007 ?
I think no wifi is a symptom of a bad kernel flash due to being s-on. So I think being s-off and flashing again might help.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
I think no wifi is a symptom of a bad kernel flash due to being s-on. So I think being s-off and flashing again might help.
Click to expand...
Click to collapse
Yes but you don't need to be S-Off. Simply use my instructions ( /showthread.php?t=1803354 ) and it will be fine. :good:
SturmGhost said:
Yes but you don't need to be S-Off. Simply use my instructions ( /showthread.php?t=1803354 ) and it will be fine. :good:
Click to expand...
Click to collapse
THANKS alot ghost, finally got the wifi working. :good:
So, I have gone through the whole process of rooting my phone, unlocking it. I have TWRP on it, Titanium backup (thankfully), Goo Manager. It is S-on. I have 2.09 Hboot. My TWRP-jewel is 2.5.0.0. Ok, now onto my question, I am trying to get CM-10 to load but it doesn't go any further than the load screen. No matter what I try. I have even tried switching to JellyBAM but all to no avail. Can someone offer me tips as to what I may have done or be doing wrong? Thanks in advance
[Q] trying to put CM10 on my rooted phone
Forgive me if I put this in the wrong group, but I feel this is probably the right one for it. I have Hboot 2.09. I have TWRP. I have S-on. I want to put CM10 with Gapps onto my phone but every way I have tried, CM10 just sits there and loops around, the longest being an hour. I figured some time was possible, but come on. Over on Google+, people are telling me to flash this and flash that, fastboot this or that. I have no idea what they are trying to say to me. I am loving learning all of this but I need a little more explanation than just flash something. I realize that flash has something to do with commands. I am running windows 8 if that helps on my laptop. My TWRP version is 2.5.0.0. I don't know if my phone has gone through the latest update or not. Thanks for any help you can give me!
You have to install the kernel separately from the ROM since you're S-on. Click the link in my sig for more info.
You most likely have the newest touch panel driver, so you can only use ROM's based off the latest OTA, software version 3.16. Your touchscreen won't work otherwise. You can gain S-off and downgrade your touch panel driver, at which point you can run AOSP ROM's like CM.
Sent from my EVO using xda premium
tabidee said:
Forgive me if I put this in the wrong group, but I feel this is probably the right one for it. I have Hboot 2.09. I have TWRP. I have S-on. I want to put CM10 with Gapps onto my phone but every way I have tried, CM10 just sits there and loops around, the longest being an hour. I figured some time was possible, but come on. Over on Google+, people are telling me to flash this and flash that, fastboot this or that. I have no idea what they are trying to say to me. I am loving learning all of this but I need a little more explanation than just flash something. I realize that flash has something to do with commands. I am running windows 8 if that helps on my laptop. My TWRP version is 2.5.0.0. I don't know if my phone has gone through the latest update or not. Thanks for any help you can give me!
Click to expand...
Click to collapse
First of all you might be on the newest touch panel driver, and that's the first thing that gets you in trouble because aosp roms don't work with that, as of now, it might work later... Who knows... Secondly you need to flash the boot.img separately thru fastboot because your are s-on and on 2.09... To make your life easier try to get s-off either thru facepalm or dirty racun... That way you can flash any rom and also downgrade your touch panel driver to get aosp working on your phone... If you flash viper rom it has a senseless option so you can use nova and get stability and some sort of aosp look... Good luck!
Sent from my EVO
Yes, S-off is the way to go if you want to run CM. Otherwise, try meanbean or viper or sharkie or any other sense based Rom. They should work fine.
Sent from my EVO using xda app-developers app
I have tried to do facepalm. When I put the code in (I'm assuming it goes in the command window), I get messages like "adb not valid command". Even though my phone is most definitely rooted, says unlocked. Should I redownload android-sdk? Thanks again!
Sent from my EVO using xda app-developers app
tabidee said:
I have tried to do facepalm. When I put the code in (I'm assuming it goes in the command window), I get messages like "adb not valid command". Even though my phone is most definitely rooted, says unlocked. Should I redownload android-sdk? Thanks again!
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
ADB commands must be issued when the phone is mounted as media share not as fastboot. Connect your phone as if you were transferring files between it and your pc.
Something new to try since you're on the latest OTA.
http://forum.xda-developers.com/showthread.php?t=2321072
Sent from my EVO using xda premium
atheistevofreak said:
ADB commands must be issued when the phone is mounted as media share not as fastboot. Connect your phone as if you were transferring files between it and your pc.
Click to expand...
Click to collapse
I do have it connected to the computer like that. Do you mean I have to go into TWRP and mount it that way? I tried it that way too. I downloaded and whole new android SDK to see if that is the problem. If not, I am going to factory reset my phone and start over. I can't imagine why I was able to root the phone, get it unlocked, but now I can't do anything else with it. Not even get adb commands to recognize it.
tabidee said:
I do have it connected to the computer like that. Do you mean I have to go into TWRP and mount it that way? I tried it that way too. I downloaded and whole new android SDK to see if that is the problem. If not, I am going to factory reset my phone and start over. I can't imagine why I was able to root the phone, get it unlocked, but now I can't do anything else with it. Not even get adb commands to recognize it.
Click to expand...
Click to collapse
If I were you I would try the new S-off method I posted above. It's Windows friendly
Sent from my EVO using xda premium
thank you
FinZ28 said:
If I were you I would try the new S-off method I posted above. It's Windows friendly
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I know that I have been a particularly trying noob this week and I apologize. I tried to go back and thank the ones that helped me along the way and i did realize I double posted. I apologize for that too. So a big thank you!!!!!!!!!:good:
Message is for user tabidee tho if anyone else can help..koo..but I doubt u want tow
This is for tabidee hey I was reading ur stuff on xda developers and I have a question. If u can help if not its cool. Ok so i got my sprint evo and I went to try to root it. I went thru a process that with the steps combined with htcdev site got me to say unlock my bootloader. I used hoot 2.09 and I was supposed to flash this pimg175 zip to i guess install a recovery. Well that won't work at all... I cant get my s on switched to s off and so i am stuck with according to the hoot screen a tampered, unlocked with s on, unrooted phone. I am so confused with all the steps and files I had to download, rename and save to various folders that I gave up. With my phone at its current state what do I do next? I deleted all the files from the day I unlocked it but if you can explain to me... And explain like if I was a five year old cuz I'm that dumbfounded on this subject... But if u can maybe walk me thru the rest of the process or walk me thru a undoing of what I done so far. I'm lisa. My email is [email protected]
Check out the link below. It's a GUI for rooting and has everything you need to get your phone rooted. You'll need to install the recovery first then superuser, which will give you root.
http://forum.xda-developers.com/showthread.php?t=2436217
Sent from my HTC EVO 4G LTE
Whoever has time and is bored.....come help me one on one
datbitch said:
This is for tabidee hey I was reading ur stuff on xda developers and I have a question. If u can help if not its cool. Ok so i got my sprint evo and I went to try to root it. I went thru a process that with the steps combined with htcdev site got me to say unlock my bootloader. I used hoot 2.09 and I was supposed to flash this pimg175 zip to i guess install a recovery. Well that won't work at all... I cant get my s on switched to s off and so i am stuck with according to the hoot screen a tampered, unlocked with s on, unrooted phone. I am so confused with all the steps and files I had to download, rename and save to various folders that I gave up. With my phone at its current state what do I do next? I deleted all the files from the day I unlocked it but if you can explain to me... And explain like if I was a five year old cuz I'm that dumbfounded on this subject... But if u can maybe walk me thru the rest of the process or walk me thru a undoing of what I done so far. I'm lisa. My email is [email protected]
Click to expand...
Click to collapse
Can someone just email me on the side and we can come up with a good day n time to IM or even a phone call covenrsation so we can go step by step and hook my phone up right. I'm just way too dumbfounded on the whole thing at this point.... The weed probably coulda waited... Lol.. [email protected]
kinda
datbitch said:
Can someone just email me on the side and we can come up with a good day n time to IM or even a phone call covenrsation so we can go step by step and hook my phone up right. I'm just way too dumbfounded on the whole thing at this point.... The weed probably coulda waited... Lol.. [email protected]
Click to expand...
Click to collapse
I had to do moonshine with wubi lunbuntu linux terminal. Rooting is easy u do it from google play look for 4.2.2 roms that are ok with s-on. mean is easy.
so I still have to connect my sh*t to da pc and go thru some more steps with this lunbuntu thing before though rite? BTW... the HTC software update won't complete itself so I'm still 4.1 I think
Sent from my EVO using XDA Premium 4 mobile app
first thank you for responces in advance...I just upgraded from evo to evo4g lte and rooted and unlocked my 4g lte. I flashed cm 10.2 and was working good untill it stopped reading my sd card. So i tried to flash diff. rom and now Im stuch at fastboot screen. When i go into recovery(twrp) it has no touch so its usless...Is there anything i could from fastboot or do i have a paper weight? Please help...Or can i just break my phone and bring it to sprint and get another cuz its only a week old?...lol...Im soo lost and frustrated about this and loosing much sleep...Thanks guys
robburns20 said:
first thank you for responces in advance...I just upgraded from evo to evo4g lte and rooted and unlocked my 4g lte. I flashed cm 10.2 and was working good untill it stopped reading my sd card. So i tried to flash diff. rom and now Im stuch at fastboot screen. When i go into recovery(twrp) it has no touch so its usless...Is there anything i could from fastboot or do i have a paper weight? Please help...Or can i just break my phone and bring it to sprint and get another cuz its only a week old?...lol...Im soo lost and frustrated about this and loosing much sleep...Thanks guys
Click to expand...
Click to collapse
which version of TWRP did you use? 2.6.0.0 has issues. 2.6.1.0 is ok or PhilZ touch CWM works fine.
Never mind
Sent from my HTCONE using xda app-developers app
thanks
Sorry i wasnt expecting that fast a responce....I got twrp 2.6.0.0...Is there anyway to flash from fastboot to 0.1...Im at work also so tryin to look at computer asa can
robburns20 said:
Sorry i wasnt expecting that fast a responce....I got twrp 2.6.0.0...Is there anyway to flash from fastboot to 0.1...Im at work also so tryin to look at computer asa can
Click to expand...
Click to collapse
yea the same way you installed twrp 2.6.0.0
download the latest from here
http://techerrata.com/browse/twrp2/m7wls
boot into fastboot and flash the recovery then clear the cache
THANKS
What about cm 10.2 not reading my sd card will that have ant affect on the way it flashes twrp this time???? i will post how it goes when I do it later 2night...Thanks again,Robert
From what I read and the reason I tried to chance rom is that cm10.2 is not reading my sd cards so i hope it doesnt stop me from getting twrp cuz it wont read the right ext (sdext,sd,internal)...I hope im making sence cuz im deff a noob and only know so much..lol
cloppy said:
yea the same way you installed twrp 2.6.0.0
download the latest from here
http://techerrata.com/browse/twrp2/m7wls
boot into fastboot and flash the recovery then clear the cache
Click to expand...
Click to collapse
that recovery is for the htc one, he says he has an evo 4glte, so???(i think he's in the wrong forum) here again simply revert back to twrp 2.5.0.0....there are problems with 2.6.0.0
thanks
Aldo101t said:
that recovery is for the htc one, he says he has an evo 4glte, so???(i think he's in the wrong forum) here again simply revert back to twrp 2.5.0.0....there are problems with 2.6.0.0
Click to expand...
Click to collapse
Thanks for the reply...I looked for evo 4g lte fourm on here but this is closest to it i could find or see...I will go back to 2.5.0.0...I thought i might have missed the update to 2.6.0.1 but if thats for the htc one i will just go back and update later...Again i will post after i try this evening...Thanks again
robburns20 said:
Thanks for the reply...I looked for evo 4g lte fourm on here but this is closest to it i could find or see...I will go back to 2.5.0.0...I thought i might have missed the update to 2.6.0.1 but if thats for the htc one i will just go back and update later...Again i will post after i try this evening...Thanks again
Click to expand...
Click to collapse
All devices have different needs. Flashing an HTC one recovery on a 4glte could lead to many issues.
wth
Ok lets see. Last night I spent a few hours and got my evo 4g lte to load (twrp) so not only do I have bootloader(fastboot) I have twrp... I try to post the specs that I do know...{s-on, hboot- 2.09.0000, radio- 1.12.11.1210, and twrp 2.5.0.0..... But I have nothing on my internal sd at all so there was nothing to flash or revert to... When I booted into twrp and mounted to my computer internal was empy so I tried to put a ruu zip file there unmounted and tried to flash it in twrp...Nothing happened... So after hours of looking for what to do the only thin I see is to go S-OFF with PANDA? Im hopeing you guys can tell me if that's the right thing to do or should I try to get some type of rom or stockrom on the phone first? Also what is UBUNTU and do I need to use it...THANKS GUYS ALOT,ROB
robburns20 said:
Ok lets see. Last night I spent a few hours and got my evo 4g lte to load (twrp) so not only do I have bootloader(fastboot) I have twrp... I try to post the specs that I do know...{s-on, hboot- 2.09.0000, radio- 1.12.11.1210, and twrp 2.5.0.0..... But I have nothing on my internal sd at all so there was nothing to flash or revert to... When I booted into twrp and mounted to my computer internal was empy so I tried to put a ruu zip file there unmounted and tried to flash it in twrp...Nothing happened... So after hours of looking for what to do the only thin I see is to go S-OFF with PANDA? Im hopeing you guys can tell me if that's the right thing to do or should I try to get some type of rom or stockrom on the phone first? Also what is UBUNTU and do I need to use it...THANKS GUYS ALOT,ROB
Click to expand...
Click to collapse
Wrong forum. http://forum.xda-developers.com/forumdisplay.php?f=1590 You're likely to get into more trouble reading responses in this thread from people not reading the title and assuming you mean a HTC One.
Rirere said:
Wrong forum. http://forum.xda-developers.com/forumdisplay.php?f=1590 You're likely to get into more trouble reading responses in this thread from people not reading the title and assuming you mean a HTC One.
Click to expand...
Click to collapse
Yes to this.
robburns20 please be careful what device section you are posting in. You could end up with a brick if you do not post in the correct section.
Thread moved.
THANK YOU
TonyStark said:
Yes to this.
robburns20 please be careful what device section you are posting in. You could end up with a brick if you do not post in the correct section.
Thread moved.
Click to expand...
Click to collapse
THANKS FOR THE WARNING...I WILL POST MORE CAREFULLY :silly: :good: