hi guys , i spent last 2 nights triyng to find a solution to my problem.
i readed all posts and informations in the forum about software update to unlock bootloader on my phone (it is vodafone brand italy with firm 20c)so i wanna put on it an open firm to unlock bootloader. i had success with all drivers an settings till my phone reboot into sw upgrade mode...
at this time windows (xp, 7 and 8 ) start to get in infinite loop with ballon tips saying that the usb device is not recognized. i tryied to reinstall all drivers ,reboot, re- install all programs....but same problem. im able to get phone recognized thru the all process(drivers,programs) till UP-test and kdz up reboot the phone in sw upgrade.
whats wrong with it? any helps ?
thanks and hope my english is good enough!
just to let you know guys that i tryied this morning on other 2 different computer (xp) but still got same issue. ....
yhea....i ve got L9 limited edition...the only 1 in the world that make windows crazy on sw upgrade mode:good::good:
Start KDZ with phone turn on, it will go to sw and recognize it correctly. It is mentioned in tutorial.
Sent from my P760 using xda app-developers app
anirion said:
Start KDZ with phone turn on, it will go to sw and recognize it correctly. It is mentioned in tutorial.
Sent from my P760 using xda app-developers app
Click to expand...
Click to collapse
that s what i did ....as i said in the first post.....with the phone on (as all tutorials mentions) till KDZ make the phone reboot in sw upgrade, windows (any version of it and on 3 different computers) does not recognize it starting with the " not recognized loop"
Try a different USB cable
Lelus said:
Try a different USB cable
Click to expand...
Click to collapse
did it.... 3 different cables ,3 different computers, about 12 different usb ports and 3 different version of windows (xp,7,8)
bludevil84 said:
did it.... 3 different cables ,3 different computers, about 12 different usb ports and 3 different version of windows (xp,7,8)
Click to expand...
Click to collapse
check the spelling on the kdz file, it should be all CAPS
example
v20c_00.kdz bad
V20C_00.kdz :good:
kuma82 said:
check the spelling on the kdz file, it should be all CAPS
example
v20c_00.kdz bad
V20C_00.kdz :good:
Click to expand...
Click to collapse
all in caps
Related
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
Hello everyone
I am new to LG phones but quite familiar with modding Sony phones, as all of you know that there are many problems with L9 like not able to move data to sd card, Touch screen sluggishness sometimes and not able to mount the memory card but many of them can be fixed via rooting. But again only V10a and V10c are rootable, i have v10d P765 IND version. I want to degrade the firmware so that i can root the mobile and play with it properly.
I followed the guide KDZ offline flashing method but I am getting error
"cannot connect to internet , check the cable line"
I am following every step, Does anyone know what is this?
Thanks in advance :fingers-crossed:
Odp: [Q] Problems with Downgrading L9
Well u added host so u get this error. It's good just don't click on it and flash soft.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
Please read again
Bro i this error is coming when i click on upgrade software, where flashing supposed to start.
vaibhav rathi said:
Bro i this error is coming when i click on upgrade software, where flashing supposed to start.
Click to expand...
Click to collapse
well did u run shttps ?
did u run windows enabler to ON ?
did u installed proper drivers for phone ?
did u turned of lg pc suite ?
did u installed proper lg mobile support tool ?\
did u instaled android sdk (not required but... still good to have it)
and the most important did u readed the tutorial few times ?
if u have checked all steps as YES then everything should go well.
Just check everything again.
Btw i also get that info when i dont turn on shttps !
PROblem persist
Thanks for the suggestion,
I did everything thats said in the tutorial, flashing started but stopped at update saying, problem with communicating device and PC. as told i tried both modes
1. usb debugging on (mobile normal)
2. software update mode (by holding vol up and connection)
but the problem persist.....i have installed every single driver i supposed to insatlled, but bro its really frustating....I really want to root ....or i have to sell this mobile by swearing never to buy LG mobile...
Your first problem (Please, check internet line and execute program again.) is solved. Correct?
And now you got a "cannot connect to phone" message, right?
Did you try to connect to your phone with LG PC Suite. Because if you can connect and sync your phone then all driver is installed. Download at your local LG website ex. for me http://www.lg.com/th/support-mobile/lg-LGP768F#software, in PC Sync Tab
If you install all drivers when you connect to your PC, you should see new 2 drives (Phone internal SD and External SD)
NOT solved bro
the problem came again, it start showing check the internet cable again.....
i dont know what the problem is?
it worked once but now its not working. It seems that my shttp isnt working properly because i can connect the mobile via internet and check the update, when offline it start showing that again.
Btw i am using automatic offline procedure.vbs program. I think there will be less chance of mistake by this method.
my mobile is being detected perfectly by pc suite and other media, as you mentioned i can see two drives also.
Basically i am standing at the starting problem again...wtf....
Nevermind bro thanks for the help. I have already given you so much headache.:angel:
vaibhav rathi said:
Hello everyone
I am new to LG phones but quite familiar with modding Sony phones, as all of you know that there are many problems with L9 like not able to move data to sd card, Touch screen sluggishness sometimes and not able to mount the memory card but many of them can be fixed via rooting. But again only V10a and V10c are rootable, i have v10d P765 IND version. I want to degrade the firmware so that i can root the mobile and play with it properly.
I followed the guide KDZ offline flashing method but I am getting error
"cannot connect to internet , check the cable line"
I am following every step, Does anyone know what is this?
Thanks in advance :fingers-crossed:
Click to expand...
Click to collapse
There is full-working guide for flashing and rooting by me in Development section. Also it seems you missed the Collection of ROMS and Rooting post above in General Section too.
Forget windows enabler or vbscripting and flash offline in simple steps and simply root. perfectly works for P765 and others variants too.
I am with Rooted Stock V10c on P765 India. Working superb with no issue at all since 2 weeks or more.
I followed your guide only
hello,
I am from india too and i am on 10d firmware, i tried your guide only from starting and believe me I followed every single step in your guide but actually I am getting error while updating at 3-6%....
"communication problem between device and PC"
For information I tried software update method and usual mobile on (Debugging on) methods. even tried every single usb port in my PC.
I tried atleast 20 times to restart in different modes but still it donot complete....I am really frustated by its low memory. whats the point of having a quite powerful hardware if I cannot even play games just because of low memory..
vaibhav rathi said:
hello,
I am from india too and i am on 10d firmware, i tried your guide only from starting and believe me I followed every single step in your guide but actually I am getting error while updating at 3-6%....
"communication problem between device and PC"
For information I tried software update method and usual mobile on (Debugging on) methods. even tried every single usb port in my PC.
I tried atleast 20 times to restart in different modes but still it donot complete....I am really frustated by its low memory. whats the point of having a quite powerful hardware if I cannot even play games just because of low memory..
Click to expand...
Click to collapse
I think if its stopping at 3-6% that roughly means the flashing did not start at all upto that poing and you are getting total connect proble. Tried changing cable? Cant ruleout connection problem due to cable with weak transmission. Also a driver issue.
This worked here for everyone on P765. You may try again with proper drivers.
Did you start software upgrade mode by power off your phone and hold volume up button when plug in usb cable? You phone should show software upgrade screen.
I remember that I can flash almost other model/variant on my phone except one, which I cannot remember. If it not compatible with your phone there are error after reboot.
hello !! i got this z ultra a month ago... rooted it with the help of Vroot... and unfortunately.. today, i was using an app called android tweaker.. used some settings there like GPU rendering, Multitasking & Touch sensitivity enhancer.. it asked for a hard reboot... there you go.. struck .. shows up sony logo and reboots... thats all.... i have flash tools, i have Backup TA .. i dont have cmw on the phone nor the titanium backup... kindly help me .... i tried to repair with pc companion.. but it fails to dect the phone as its not completely booting up... tried to get it detected in fastboot ... but it says something like S1 fastboot drivers not found ... !! requesting expwert advice.. i was with the latest version of update .. something like 510 or 526... i've not unlocked bootloader at all... :good::good:
GauthamD said:
hello !! i got this z ultra a month ago... rooted it with the help of Vroot... and unfortunately.. today, i was using an app called android tweaker.. used some settings there like GPU rendering, Multitasking & Touch sensitivity enhancer.. it asked for a hard reboot... there you go.. struck .. shows up sony logo and reboots... thats all.... i have flash tools, i have Backup TA .. i dont have cmw on the phone nor the titanium backup... kindly help me .... i tried to repair with pc companion.. but it fails to dect the phone as its not completely booting up... tried to get it detected in fastboot ... but it says something like S1 fastboot drivers not found ... !! requesting expwert advice.. i was with the latest version of update .. something like 510 or 526... i've not unlocked bootloader at all... :good::good:
Click to expand...
Click to collapse
You need to install the ADB sony drivers... 's1fastboot' requires these. Do a search on google and they will pop up.
actually here are the drivers:
HSPA+ http://developer.sonymobile.com/downloads/drivers/xperia-z-ultra-driver/
LTE http://developer.sonymobile.com/downloads/drivers/xperia-z-ultra-c6833-c6806-c6843-driver/
If PC companion still doesnt work then you will need to use 'flashtool' and can then flash an FTF firmware file.
flashtool: http://dfiles.eu/files/lbbuacfhe
.532 firmware: https://docs.google.com/file/d/0B_rMaA9i_MUSRi1zWlpCOXV4RUE/edit?usp=sharing
I was thinking of making a video on how to do all of these steps, however I have to fly out in a couple of hours so wont have time until next week...
thank you .... !! i will try all these ... i have a slow internet..
hamdogg said:
You need to install the ADB sony drivers... 's1fastboot' requires these. Do a search on google and they will pop up.
thanks thanks .... ill try these and let you know .. soon... my internet will lwt mw do these in a week hopefully ... thank you again... :good:
Click to expand...
Click to collapse
Next time, don't try to tweak a stock kernel. If you're not sure how stuff works, don't mess with it. If you're not sure about something then ask us before you do stuff like this. There's a reason why we're all here.
Sent from my Z Ultra, using XDA Premium 4
the driver package that i downloaded doesnt really has a .exe or .bat file... how do i get it installed ... really confused ...
GauthamD said:
the driver package that i downloaded doesnt really has a .exe or .bat file... how do i get it installed ... really confused ...
Click to expand...
Click to collapse
I emailed you this, but may have gone to spam..
they are just driver ini files and system config settings.
1) right click on my computer
1a) properties
2) device profile
3) look for devices without drivers
4) update driver
5) advanced/
6) have disk
7) use the unzipped folder as the location
8) yes continue with unsigned driver version
done
i may have missed a step as I only have access to my Ultra at the moment, but thats what you need to do
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Sonic1981 said:
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Click to expand...
Click to collapse
Sonic 1981: Professional Bricker since 2013.
Order some business cards ASAP
LordManhattan said:
Sonic 1981: Professional Bricker since 2013.
Order some business cards ASAP
Click to expand...
Click to collapse
When I hold down the volume down and plug. The green led blinks and goes off.. but fast boot is working fine. . I've ftf file. Which cannot be flashed in fast boot. Fast boot asks for .img or .sin files. Doesn't accept ftf.* . . My phone is into boot loop. . Can't use Sony pc companion as it restarts b4 the pc companion can install the drivers. . I need to use fast boot exclusively. ..
GauthamD said:
When I hold down the volume down and plug. The green led blinks and goes off.. but fast boot is working fine. . I've ftf file. Which cannot be flashed in fast boot. Fast boot asks for .img or .sin files. Doesn't accept ftf.* . . My phone is into boot loop. . Can't use Sony pc companion as it restarts b4 the pc companion can install the drivers. . I need to use fast boot exclusively. ..
Click to expand...
Click to collapse
The correct for fastboot is blue led always on
When using S1 mode the green led blinks then no led if im right
And use flashtool instead, much easier
Sonic1981 said:
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Click to expand...
Click to collapse
I did this but PC companion says : the device has software modified than it cant be repear.
What else cn i do?
natispain said:
I did this but PC companion says : the device has software modified than it cant be repear.
What else cn i do?
Click to expand...
Click to collapse
Flash with flashtool i suppose.
herogjan said:
Flash with flashtool i suppose.
Click to expand...
Click to collapse
First, it didnt work. I installed and uninstalled many times flashtool and different versiont of flashtool and finally I dont know how but it worked.
I have Tmobile G965U on android 9 One UI beta build PPR1.180610.011.G965USQU3CSAB and when I try to update on the phone it says the software isnt supported. When I try to flash literally any stock rom in Odin it either fails or gets stuck at SetupConnection/Initialzation. Can anyone help me get my phone up to date?
bkob024 said:
I have Tmobile G965U on android 9 One UI beta build PPR1.180610.011.G965USQU3CSAB and when I try to update on the phone it says the software isnt supported. When I try to flash literally any stock rom in Odin it either fails or gets stuck at SetupConnection/Initialzation. Can anyone help me get my phone up to date?
Click to expand...
Click to collapse
Sounds like a firmware mismatch possibly. What does it say in Settings/About phone/Software information/Service provider SW version? Last line under your IMEI number. Mine is TMB/TMB/VZW. I think possibly the first to have to match for OTA updates to work. The last one indicates what the original firmware out of the box was.
YrrchSebor said:
Sounds like a firmware mismatch possibly. What does it say in Settings/About phone/Software information/Service provider SW version? Last line under your IMEI number. Mine is TMB/TMB/VZW.
Click to expand...
Click to collapse
In IMEI information is just says 32 under IMEI SV
YrrchSebor said:
Sounds like a firmware mismatch possibly. What does it say in Settings/About phone/Software information/Service provider SW version? Last line under your IMEI number. Mine is TMB/TMB/VZW. I think possibly the first to have to match for OTA updates to work. The last one indicates what the original firmware out of the box was.
Click to expand...
Click to collapse
oh sorry wrong place. Mine says. TMB/TMB/TMB
bkob024 said:
oh sorry wrong place. Mine says. TMB/TMB/TMB
Click to expand...
Click to collapse
Hmm that looks good. The OTA failure might be due to you having the beta firmware. There might be a series of beta updates you can install from here in the forums to get you where you need to be. I'm not a hundred percent sure though.
Otherwise you ought to be able to update via Odin if you download the latest T-Mobile release. Are you experienced with Odin, is it recognizing your phone when it's in download mode?
YrrchSebor said:
Hmm that looks good. The OTA failure might be due to you having the beta firmware. There might be a series of beta updates you can install from here in the forums to get you where you need to be. I'm not a hundred percent sure though.
Otherwise you ought to be able to update via Odin if you download the latest T-Mobile release. Are you experienced with Odin, is it recognizing your phone when it's in download mode?
Click to expand...
Click to collapse
Odin wont flash any rom whatsoever. I've already tried 3 different versions but I gave up since they usually take 4 hours to download. Odin gets stuck and/or fails at Setupconnection or initialization steps every time. I'm only asking for help because Odin will not work. I figured I need an update for the beta. They only work for each build though so I need the build that updates baseband ZRL5
bkob024 said:
Odin wont flash any rom whatsoever. I've already tried 3 different versions but I gave up since they usually take 4 hours to download. Odin gets stuck and/or fails at Setupconnection or initialization steps every time. I'm only asking for help because Odin will not work. I figured I need an update for the beta. They only work for each build though so I need the build that updates baseband ZRL5
Click to expand...
Click to collapse
So the phone is being recognized in Odin(the little box that says com:x or whatever)? Sometimes it helps to try a different cable if you have one. it sounds more like a connection thing than an issue with the firmware?
YrrchSebor said:
So the phone is being recognized in Odin? Sometimes it helps to try a different cable if you have one. it sounds more like a connection thing than an issue with the firmware?
Click to expand...
Click to collapse
tried all the usb c cords in the house including the original one and a cord for a Pixel 2.
bkob024 said:
tried all the usb c cords in the house including the original one and a cord for a Pixel 2.
Click to expand...
Click to collapse
what kind of USB ports does your computer have? I seem to remember people having issues with USB 3, and having to use USB 2 maybe?
YrrchSebor said:
what kind of USB ports does your computer have? I seem to remember people having issues with USB 3, and having to use USB 2 maybe?
Click to expand...
Click to collapse
Tried all 9 ports on my computer
bkob024 said:
Tried all 9 ports on my computer
Click to expand...
Click to collapse
You have activate developer options and inside OEM unlocked and usb debugging ? Or try to get back to android 8 maybe is possible because you have beta firmware.
gentr said:
You have activate developer options and inside OEM unlocked and usb debugging ? Or try to get back to android 8 maybe is possible because you have beta firmware.
Click to expand...
Click to collapse
Wouldnt even have gotten this far if I didnt have ADB debugging enabled. As I said before several times. Odin wont flash anything. I've already tried to go back to 8. If you can tell me how to get back to 8 without Odin that would be nice. But i need links to files not unhelpful text that tells me that I need to find something. Thats the whole issue. It's almost impossible to find the correct files unless someone who already knows gives you a link to them. I thought that's one thing XDA used to be good for but I guess that isnt the case anymore.
I would of helped but you kinda sound like a ****. Have fun with your perma-beta phone!
https://firmware.science
Download the update from this website then follow the instructions at the bottom of the page. This is the only thing I can think of if Odin isn't working
bkob024 said:
I have Tmobile G965U on android 9 One UI beta build PPR1.180610.011.G965USQU3CSAB and when I try to update on the phone it says the software isnt supported. When I try to flash literally any stock rom in Odin it either fails or gets stuck at SetupConnection/Initialzation. Can anyone help me get my phone up to date?
Click to expand...
Click to collapse
If your stuck on setup connection on Odin some things to try assuming using windows
Use Odin 3.13.1 ( or modified Odin 3.13.1B )
If you have smart switch/Kies install, un-install it.
USB cable i'm assuming is a data cable.
USB port try plugging into USB 2 port.
Plug phone directly into PC not any hubs.
Use latest Samsung USB drivers.
Run Odin in administrator mode.
Boot into download mode then reboot back into download mode again.
Maybe turn off any anti-virus programs.
Try a different PC.
These are a few things to try as failing at setup connection can be a common with some people and can vary with the PC.
Also note having OEM unlocked or USB debugging has no bearing when flashing stock firmware with Odin.
spawnlives said:
If your stuck on setup connection on Odin some things to try assuming using windows
Use Odin 3.13.1 ( or modified Odin 3.13.1B )
If you have smart switch/Kies install, un-install it.
USB cable i'm assuming is a data cable.
USB port try plugging into USB 2 port.
Plug phone directly into PC not any hubs.
Use latest Samsung USB drivers.
Run Odin in administrator mode.
Boot into download mode then reboot back into download mode again.
Maybe turn off any anti-virus programs.
Try a different PC.
These are a few things to try as failing at setup connection can be a common with some people and can vary with the PC.
Also note having OEM unlocked or USB debugging has no bearing when flashing stock firmware with Odin.
Click to expand...
Click to collapse
OMG. Ok I'll try all those things and get back to you.
Remember the days when this use to be easy? I miss the old days of just flashing roms willy nilly on my Galaxy Nexus. Oh how you will be missed Cyanogenmod :crying:
znel52 said:
I would of helped but you kinda sound like a ****. Have fun with your perma-beta phone!
Click to expand...
Click to collapse
I dont see the issue with helping people that are named Richard, nor do i see any reason to post this as it definitely qualifies as spam and did nothing but detract from this thread.
bkob024 said:
OMG. Ok I'll try all those things and get back to you.
Remember the days when this use to be easy? I miss the old days of just flashing roms willy nilly on my Galaxy Nexus. Oh how you will be missed Cyanogenmod :crying:
Click to expand...
Click to collapse
pls post up the Odin error report youre getting when flashing the firmware youre attempting.