Hello All,
I just started to utilize the full potential of the Android community.
I wanted to start by flashing my Micromax Canvas HD A116 with the JB 4.2.1 update.
I proceeded to flash it, using the flashing tutorial on the xda forum itself.
I successfully managed to flash my phone, but after flashing on 4.2.1 update, I noticed the following problem.
Problem - First, the 4.2.1 JB update, did not have the camera app in the app drawer and if somehow the camera app is opened, I could only use the front camera of the phone, which was very irritating.
Then I proceeded to root my device, and then install the 4.1.2 custom rom from xda itself. Since I hadnt made any backup on the stock rom.
Then I could manage to find the same problem on every 4.2.1 updated custom ROM.
And I mean, every custom ROM on the xda forum.
Is there any solution to this ? No rear camera on every update.
Also, suddenly, this 4.1.2 update is also becoming crummy. Am having the WiFi problem, where the wifi just stucks on 'Obtaining IP Address' and does not connect at all.
Please HELPP !!!!! :crying:
Regards,
hitesh.soni890 said:
Hello All,
I just started to utilize the full potential of the Android community.
I wanted to start by flashing my Micromax Canvas HD A116 with the JB 4.2.1 update.
I proceeded to flash it, using the flashing tutorial on the xda forum itself.
I successfully managed to flash my phone, but after flashing on 4.2.1 update, I noticed the following problem.
Problem - First, the 4.2.1 JB update, did not have the camera app in the app drawer and if somehow the camera app is opened, I could only use the front camera of the phone, which was very irritating.
Then I proceeded to root my device, and then install the 4.1.2 custom rom from xda itself. Since I hadnt made any backup on the stock rom.
Then I could manage to find the same problem on every 4.2.1 updated custom ROM.
And I mean, every custom ROM on the xda forum.
Is there any solution to this ? No rear camera on every update.
Also, suddenly, this 4.1.2 update is also becoming crummy. Am having the WiFi problem, where the wifi just stucks on 'Obtaining IP Address' and does not connect at all.
Please HELPP !!!!! :crying:
Regards,
Click to expand...
Click to collapse
why don't you flash to official 4.2.1 from http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Hello
rajneeshk said:
why don't you flash to official 4.2.1 from http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Click to expand...
Click to collapse
Thats the first ROM that I flashed my phone with
Flashed it with 4.2.1 official updates, in the beginning.
Then, since I could not fix the camera, I had to root to flash the stock 4.1.2 ROM on my phone.
Thats when I tried the other 4.2.1 JB ROMs.
hitesh.soni890 said:
Thats the first ROM that I flashed my phone with
Flashed it with 4.2.1 official updates, in the beginning.
Then, since I could not fix the camera, I had to root to flash the stock 4.1.2 ROM on my phone.
Thats when I tried the other 4.2.1 JB ROMs.
Click to expand...
Click to collapse
i can confirm that it is problem with your device's camera (hardware). It has nothing to do with ROM.
Same thing here no camera after 4.2.1 update so reverted back to 4.1.2 and tried re downloading the file but same problem exist....and i got news from service center that 4.2.1 has been scrapped from there ftp site due to some problem and told me that within 15 days there will be new update so better wait for a new version of 4.1.2 from sc.....
Sent from my Micromax A116 using xda premium
junaid992 said:
Same thing here no camera after 4.2.1 update so reverted back to 4.1.2 and tried re downloading the file but same problem exist....and i got news from service center that 4.2.1 has been scrapped from there ftp site due to some problem and told me that within 15 days there will be new update so better wait for a new version of 4.1.2 from sc.....
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
official 4.2.1 is available at http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
rajneeshk said:
i can confirm that it is problem with your device's camera (hardware). It has nothing to do with ROM.
Click to expand...
Click to collapse
sir i am presently using 4.1.2 in my canvas HD is it safe method to update to 4.2.1 ???? plz tell me ????????/
rahulk23 said:
sir i am presently using 4.1.2 in my canvas HD is it safe method to update to 4.2.1 ???? plz tell me ????????/
Click to expand...
Click to collapse
Yes please go ahead. Check the link i shared earlier. It has a new firmware v4.
I hope your camera problem might get resolved if your camera hardware is new.
By the way when you purchased this?
Sent from my Micromax A116 using xda premium
rajneeshk said:
Yes please go ahead. Check the link i shared earlier. It has a new firmware v4.
I hope your camera problem might get resolved if your camera hardware is new.
By the way when you purchased this?
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
4 weeks back from flipkart bro.
my phone should be rooted for doing this process ????
no need to root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V4_28.06.13_JB 4.2/
Related
Hello guys Since I update my note to ics my Camera keeps frosen, failing any helps will appreciated?
Sent from my SAMSUNG-SGH-I717 using xda premium
More info ...
Are you stock ?.....rooted ??
If rooted ...which rom .if stock ...did you OTA UPGRADE, or kies ?
Many official OTA's ..devices were corrupted , and need the reflash via samfirmware.com
Help us to help you ....g
I'm on stock rom not rooted and I updated via kies
Sent from my SAMSUNG-SGH-I717 using xda premium
abakarxda said:
I'm on stock rom not rooted and I updated via kies
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
You have a bad download...and flash ...
Log into samfirmware.com and search your device....
I believe the tools menu will get you started on a clean download.
You can download a camera app from the market and see if it is the camera or the rom.
rangercaptain said:
You can download a camera app from the market and see if it is the camera or the rom.
Click to expand...
Click to collapse
Good idea ranger ...it could be a device issue ..but with all the kies failures running around ...I went there first ...g
Try going to manage apps, camera, clear data and see if that clears it up.
My camera sometimes works
SOmetimes it will work for a span of 10 seconds. Sometimes 10 minutes it will work fine. Then all other times, If i try and load my camera it freezes. Warranty is up and still have to use phone for another year. Anyone know a fix.
Rom- Stock JellyBean flashed via kies
Recovery- Stock
-Have been rooted and ran custom roms.
Thanks for any help guys.
no luck...
Since CM10.1, I never had a good luck with camera. Now I am using CM11 and camera sort of work but no video cam.
(Not to mention, random reboots)
Any workarounds, smart guys?
Should I go back to CM10.0 or stock?
I got myself this Micromax A90s this new year. I m quite pleased with the phone. Everything was fine except for GPS and battery (gets over pretty soon). 1 fine day i installed juice defender nd read of that Cpu control option. Was excited and ROOTED my phone. But now its laagging a bit and GPS problenm still persists, so basically i got nothing. As there aren't many custom ROMs available as in the case of A110. Now i want to have my stock ROM back so that i can atleast avail my warranty for the year. Is there a process like A110 to get back STOCK ROM? If yes, please suggest some solutions.
Sent from my A90S using xda app-developers app
AntrikshPanwar said:
I got myself this Micromax A90s this new year. I m quite pleased with the phone. Everything was fine except for GPS and battery (gets over pretty soon). 1 fine day i installed juice defender nd read of that Cpu control option. Was excited and ROOTED my phone. But now its laagging a bit and GPS problenm still persists, so basically i got nothing. As there aren't many custom ROMs available as in the case of A110. Now i want to have my stock ROM back so that i can atleast avail my warranty for the year. Is there a process like A110 to get back STOCK ROM? If yes, please suggest some solutions.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
Hi! Did u solved your problem? Did u get the stock rom? I have the same phone but called Allview P4 duo and i am also interested in restore thebstock rom but none helped me. If i try to flash the custom rom megamax from xda it stops bootlooping...the same as if i would flash the stock rom from the allview site....because of the cwm that doesn`t get replaced by the stock recovery...i don't know why. I currently have installed Android 4.1.1 on the ohone but i really want to switch back to the stock rom. Any sollutions?
Me also intrested in flash stock rom ics .
Is any one help to give link .
In flashing jb first format then firmware/update .
But when i flash stock ics in this way it give error.
Hey there
I installed a leaked 4.2.1 firmware but it turned out to be too buggy so I removed it and installed the stock 4.1.2 firmware which is I9300XXEMB5_I9300OXAEMB5_BTU however I get stuck in a bootloop after that. What do you think is causing the problem? I used to flash it using ODIN just fine but for some reason now I am in a bootloop. I was able to flash CWM and install Android Revolution HD and it's working but I'd like to go back to stock ROM without root or anything since a couple of friends of mine ended up with broken motherboards after being rooted for a while.
Would flashing this bootloader "bootLoader_XXEMB5.tar.md5" and then the stock ROM work? The 4.2.1 leaked ROM may have updated my bootloader or something.
Thanks!
You have to boot in recovery and wipe
Sent from my GT-I9300 using xda app-developers app
Oh wow how could I miss that. Thank you so much. I just realized that I have a problem with the Messages application occuring on any ROM I install, so it's not a problem with the leaked 4.2.1 firmware but with my device. I am going to wipe the device and cache and reinstall 4.2.1 and see how that works out! Thanks again.
TarekElsakka said:
Oh wow how could I miss that. Thank you so much. I just realized that I have a problem with the Messages application occuring on any ROM I install, so it's not a problem with the leaked 4.2.1 firmware but with my device. I am going to wipe the device and cache and reinstall 4.2.1 and see how that works out! Thanks again.
Click to expand...
Click to collapse
You're welcome man
hi
1st im not new to flashing roms and i have tried all the 4.1 custom roms here
Recently i have successfully flashed the recent 4.2.1 stock rom without any problem.
I have been reading about many people having various kind a problems after the upgrade.now i want to know
1.will i have any problem rooting and adding CWM on the new 4.2
2. while flashing the new 4.2.1 custom Roms will this tpu ulgrade happen again
3. will i be able to get back to the stock 4.2.1 using SP tool without any problem
thanks in advance:good::laugh:
1.will i have any problem rooting and adding CWM on the new 4.2 - yeah the links can be found in the development section
2. while flashing the new 4.2.1 custom Roms will this tpu upgrade happen again - nope only happens when you go from 4.1.2 to 4.2.1 or vice versa. not when switching on a same version
3. will i be able to get back to the stock 4.2.1 using SP tool without any problem - no you wont have a problem.
Cheers:highfive:
adizrox said:
1.will i have any problem rooting and adding CWM on the new 4.2 - yeah the links can be found in the development section
2. while flashing the new 4.2.1 custom Roms will this tpu upgrade happen again - nope only happens when you go from 4.1.2 to 4.2.1 or vice versa. not when switching on a same version
3. will i be able to get back to the stock 4.2.1 using SP tool without any problem - no you wont have a problem.
Cheers:highfive:
Click to expand...
Click to collapse
thanks for ur kind reply:good::laugh:
but when i flashed the 4.2.1 the tpu upgrade did not happen i thing because i was flashing from the .20 version of 4.1.2 is what some one told me here but everything is ok for me with the new 4.2 stock rom no problem:laugh:
haree said:
i was flashing from the .20 version of 4.1.2 is what some one told me here but everything is ok for me with the new 4.2 stock rom no problem:laugh:
Click to expand...
Click to collapse
cheers to that.. :good:
:laugh: :laugh: rajnikant joke in signature is awesome..
Confrim on stock 4.2 update fixes
Good to hear the 4.2 update is working fine for you. Congratulations !!!
Is all the mentioned fixes working fine?
Is the GPS fixes your current location immediately or in reasonable time?
Flipboard application working after update?
No restart issues after upgrade right?
Is the display screen looks perfect, without any additional lines or bars?
Is your proximity sensor working fine (after taking off ur phone from near to ear during the call, does the display comes on immediately?)?
How long you are using your phone after update?
Is the OTA feature available after update?
Please update us. Many of us are eager to go for the update.
Thanks,
Joe
haree said:
thanks for ur kind reply:good::laugh:
but when i flashed the 4.2.1 the tpu upgrade did not happen i thing because i was flashing from the .20 version of 4.1.2 is what some one told me here but everything is ok for me with the new 4.2 stock rom no problem:laugh:
Click to expand...
Click to collapse
spljoe said:
Good to hear the 4.2 update is working fine for you. Congratulations !!!
Is all the mentioned fixes working fine?
Is the GPS fixes your current location immediately or in reasonable time?
Flipboard application working after update?
No restart issues after upgrade right?
Is the display screen looks perfect, without any additional lines or bars?
Is your proximity sensor working fine (after taking off ur phone from near to ear during the call, does the display comes on immediately?)?
How long you are using your phone after update?
Is the OTA feature available after update?
Please update us. Many of us are eager to go for the update.
Thanks,
Joe
Click to expand...
Click to collapse
hi
this seems to be a problem : Is your proximity sensor working fine (after taking off ur phone from near to ear during the call, does the display comes on immediately?)?
it dosnt come up like when i want to end a call due to no answer the display does not flash but i can touch the location and it displays and i can cut the call the OTA works i have cheked it it says that i have the most recent version GPS and all i dont use so i dont know on that.I had this update for around 2 weeks+ flashed it via SP tool
all it all the update is OK but for the above problem which is manageable for me im on stock not rooted:good::laugh:
Flip board works too but i removed it as i dont use it
Hi, I'm now facing a problem with my Galaxy Grand Duos. It was initially on the 4.1.2 stock ROM. I tried many ROMs for 4.2.2 until I found the ROM that best suits my need which is the RR (Resurrection ROM) and it's now working normally, but the problem is that now, I need to install the 4.2.2 (leaked firmware), I found the files and followed all the tuts I found, but in videos and such they get the message "success" and I get the message "fail", I don't know what's the reason behind this, I tried changing USB ports, changing the cable, I tried nearly everything, but no avail. So basically, I now need 4.2.2 (leaked) or any KitKat (4.4) ROM, I want Carbon or SlimKat, but both require coming from a KitKat ROM (which is not my case) or 4.2.2 TW ROM, I don't think RR (Resurrection Remix) is a TW ROM, so what should I do? I need to know one of them, the KitKat or the 4.2.2 (leaked).
Thank you.
FIRST DATA&CACHE WIPE!!!
Sent from my GT-I9105P using XDA Premium HD app
chrisvenema said:
FIRST DATA&CACHE WIPE!!!
Sent from my GT-I9105P using XDA Premium HD app
Click to expand...
Click to collapse
What do you mean? I wipe data cache and factory reset each time I install a new ROM. Not a specific or useful answer actually.