Hey there
I installed a leaked 4.2.1 firmware but it turned out to be too buggy so I removed it and installed the stock 4.1.2 firmware which is I9300XXEMB5_I9300OXAEMB5_BTU however I get stuck in a bootloop after that. What do you think is causing the problem? I used to flash it using ODIN just fine but for some reason now I am in a bootloop. I was able to flash CWM and install Android Revolution HD and it's working but I'd like to go back to stock ROM without root or anything since a couple of friends of mine ended up with broken motherboards after being rooted for a while.
Would flashing this bootloader "bootLoader_XXEMB5.tar.md5" and then the stock ROM work? The 4.2.1 leaked ROM may have updated my bootloader or something.
Thanks!
You have to boot in recovery and wipe
Sent from my GT-I9300 using xda app-developers app
Oh wow how could I miss that. Thank you so much. I just realized that I have a problem with the Messages application occuring on any ROM I install, so it's not a problem with the leaked 4.2.1 firmware but with my device. I am going to wipe the device and cache and reinstall 4.2.1 and see how that works out! Thanks again.
TarekElsakka said:
Oh wow how could I miss that. Thank you so much. I just realized that I have a problem with the Messages application occuring on any ROM I install, so it's not a problem with the leaked 4.2.1 firmware but with my device. I am going to wipe the device and cache and reinstall 4.2.1 and see how that works out! Thanks again.
Click to expand...
Click to collapse
You're welcome man
Related
For some reason I cannot flash 4.0 roms. I wipe everything and format system but still no go. I get stuck at a black screen after the red Moto boot logo.
Any help would be great. Thanks
Is your system up to date. I've noticed that they all state your phone must be at version 6.12.173... I've had mine about a week, and it was at 6.11, and I had to flash the update manually as the ota wasn't taking. I have yet to try an ICS rom though.
Think someone also had a problem because they were not using the latest version of Safestrap.
http://forum.xda-developers.com/showthread.php?t=1560338
Hey thanks a lot guys. I updated my recovery and it worked fine. Thanks for your time.
Sent from my DROIDRAZR using xda premium
Ok, I was using the official ICS rom and out of nowhere I got the Wifi bug, my wifi was unable to turn on.
So I already tried to fix:
1) Unlocking the bootloader
2) Installing the CMW recovery
3) Installing the xICS Hybrid ROM rom (wiping everything)
And the bug is there even on a wiped new rom.
Still not working.
Why??? Isn't there any fix for it? Even changing roms!
Please help!
I'm going back to GB, I bought this phone for the ICS update, I still cannot believe that I will going back because of this bug.
Really.
reflash the official ics ftf
it may help i guess
Sent from my Xperia U using Tapatalk 2
Flash then do a factory reset from the menu, it fixed my issue.
gigermunit said:
Flash then do a factory reset from the menu, it fixed my issue.
Click to expand...
Click to collapse
Just did that.
From what I read on the official forum, the bug comes back after some days... let's see
Install stock GB via flash tool..this worked with me
Vaslina said:
Install stock GB via flash tool..this worked with me
Click to expand...
Click to collapse
This is true, this works. But I want to use ICS, not the old GB. That's why I bought this phone
I flashed the ICS rom again, let's see when the bug will appear.
Some Xperia models are experiencing problems with ICS and wifi...
there's an official update said to be rolling out in a few weeks wich is rumoured to fix several issues
proof
(more proof in the Xperia update threads... )
That's amazing news.
Can you tell me the link for the update thread?
Thanks
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.
Whenever I install a rom my 10.1 wifi starts bootlooping, and whenever I use a stock version it freezes and crashes a lot, is there anyway to fix this?
arboy2 said:
Whenever I install a rom my 10.1 wifi starts bootlooping, and whenever I use a stock version it freezes and crashes a lot, is there anyway to fix this?
Click to expand...
Click to collapse
I managed to install CM9 on it but it says gapps crashed every time and it restart itself and repeats
Make sure you are getting a clean flash... wipe data, cache, dalvik cache.. and then go to mounts( in cwm ) or advanced( TWRP ) and wipe system ( format it in cwm )
Also make sure you have a good download.. that can cause many different issues... from boot loops to force closes.
@arboy2
Gil81 said:
Make sure you are getting a clean flash... wipe data, cache, dalvik cache.. and then go to mounts( in cwm ) or advanced( TWRP ) and wipe system ( format it in cwm )
Also make sure you have a good download.. that can cause many different issues... from boot loops to force closes.
@arboy2
Click to expand...
Click to collapse
Do you have a good download or a better rom or even a good md5 to flash to go back to stock?
I am having a lot of problems with this tablet, sometimes it crashes, it bootloops, sometimes it just freezes and sometimes I need to force restart it so much times till it boots properly because it freezes while booting a lot.
also whenever I connect it to the PC it seems to have problems.
It used to be my sister's so I fear she broke it
Thanks for the reply
@arboy2
You can find the stock rom at sammobile.com
Also.. make sure you have an ICS bootloader... almost all the custom roms require that bootloader. You can find it at pershoot's site and flash it with Odin.
As far as good download's with md5's go.. this forum doesn't seem to use them as much as most forum's. So what I do is download a rom twice and check the md5's against each other.. that's not the best way, as you could have 2 bad download's, but it's something.. lol
If you can't find the stock 4.0.4 ICS rom at sammobile... I think I have it.. somewhere I also have the ICS bootloader..
But if you're new to flashing and Odin... I highly recommend doing some reading and watch QBKings' video's..
I would also recommend(once you know that you have the ICS bootloader)that you use the infamous TWRP recovery.. it is the best recovery for this device ( I believe )..
ICS boot loader here http://droidbasement.com/galaxy/roms/cm10.1/p4wifi/US_LPL_4.0.4_bootloader.zip for p4wifi
Sent from my GT-P7500 using XDA Premium 4 mobile app
Do you know where I can find a proper stock 3.2 firmware
arboy2 said:
Do you know where I can find a proper stock 3.2 firmware
Click to expand...
Click to collapse
I got a cwm backup of my device p4 but yours is the WiFi right ?
here is link for 4.0.4 http://www.hotfile.com/dl/165091178/ea77c7f/P7510XXLPH_P7510XEULPH_XEU.zip.html
I'll see if I can find a 3.2 for ya
http://forum.xda-developers.com/showthread.php?t=1651794 list of ROMs
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
I got a cwm backup of my device p4 but yours is the WiFi right ?
here is link for 4.0.4 http://www.hotfile.com/dl/165091178/ea77c7f/P7510XXLPH_P7510XEULPH_XEU.zip.html
I'll see if I can find a 3.2 for ya
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Yeah mine is the Wifi and I need a 3.2 version because I'm going to return it to samsung see if they can fix it, we actually got it broken from them
There is stock 4.0.4 so why not say you updated it via kies, its stock so it should be fine. been looking for a 3.2 andi can't just find a stock image just yet
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 10:50 PM ---------- Previous post was at 10:23 PM ----------
arboy2 said:
Yeah mine is the Wifi and I need a 3.2 version because I'm going to return it to samsung see if they can fix it, we actually got it broken from them
Click to expand...
Click to collapse
3.2 stock http://hotfile.com/dl/140028924/bc38255/GT-P7510_XAB_P7510UEKMP_P7510XABKMP_P7510UEKMP.zip.html
password = sampro.pl
and here is the boot loader for honeycomb http://db.tt/gmU23ylV
hope this helps you get back to stock
remember thanks button only a click away ( if it works he he)
Sent from my GT-P7500 using xda app-developers app
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks