Related
Hi everyone,
I've installed the ROM CyanogenMod 10 with the latest nightlies. Two days ago the wifi connection was stopped suddenly. I also noticied several bugs and lags in the lastest nightlies so I decided to come back the nightly dated 09/21 but no changes...
Today I've done a backup from CWM and everythinh works fine except the wifi connection. The mobile is still trying to activate the wifi but nothing more...
So I'm looking for a new modem to be able to establish the wifi connection with my Internet box.
I've found the following modems on XDA but I don't know if there are compatibles with my configuration or if better modems exist...
Thank you in advance.
http://forum.xda-developers.com/showthread.php?t=1733998
http://forum.xda-developers.com/showthread.php?t=1774541
primokorn said:
Hi everyone,
I've installed the ROM CyanogenMod 10 with the latest nightlies. Two days ago the wifi connection was stopped suddenly. I also noticied several bugs and lags in the lastest nightlies so I decided to come back the nightly dated 09/21 but no changes...
Today I've done a backup from CWM and everythinh works fine except the wifi connection. The mobile is still trying to activate the wifi but nothing more...
So I'm looking for a new modem to be able to establish the wifi connection with my Internet box.
I've found the following modems on XDA but I don't know if there are compatibles with my configuration or if better modems exist...
Thank you in advance.
Click to expand...
Click to collapse
Modem has nothing to do with ur Wifi issue ma8, since its more realated to ur Netwrk and Data connection one's.
for ur wifi issue try changing ur kernel and see
ps- ensure that the kernel is meant for I9100G not for I9100 since they are not compatible with each other
Thanks for your answer! Appreciated.
Please could you help me to find the better kernel for my I9100G?
FYI I now have the nightly dated 09/26.
Thanks again.
Modem has nothing to do with ur Wifi issue ma8, since its more realated to ur Netwrk and Data connection one's.
Click to expand...
Click to collapse
I kept the same kernel for all nightly since I'm under CM10. Why do I have this matter now?
primokorn said:
Hi everyone,
I'm writing you this post because I have too much matters with the nightlies CyanogenMod10.
I use my phone for my job so I do need a phone without bugs.
Actually I have the nightly dated 09/26 and I'l like to come back to CM9.
If I install the stock ROM ICS 4.0.4 and then CM9 through CWM, it will be OK?
Thanks a lot.
Phone : GT-I9100G ▀ Android 4.1.1 ▀ Modem : XXLPV ▀ Kernel : 3.0.36-CM ▀ Version : CyanogenMod 10
Click to expand...
Click to collapse
You can simply flash CM9 without going back to stock ROM first.
Flash CM9 with full wipe at once and all Will be ok
Sent from my GT-I9100 using Tapatalk 2
As my friend said Just Fladh CM9 From Recovery.. But Don't forget to Wipe Data/Cache
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Omaxe said:
As my friend said Just Fladh CM9 From Recovery.. But Don't forget to Wipe Data/Cache
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Click to expand...
Click to collapse
Thanks for your quick answers.
Yes I won't forget wipe data/cache I will flash CM9 thanks to recovery mode (CWM).
However I'd like to come back to CM9 because I have a matter of my WIFI connection and a "VIP member" of a french forum told me that for having a CLEAN phone, I should respect all these steps:
- Install the "full rom" KI3 (I don't if it's the right translation...). This ROM will completely reset my phone.
- Then install the rom KK5 to add new functions
- Flash CF-root LPG to obtain the admin authorizations and ICS 100% clean
- And finally I will able to flash CM9...
Is it really necessary to respect these steps???
Your 2 points of view are so different..
Thanks again!
-
primokorn said:
Thanks for your quick answers.
Yes I won't forget wipe data/cache I will flash CM9 thanks to recovery mode (CWM).
However I'd like to come back to CM9 because I have a matter of my WIFI connection and a "VIP member" of a french forum told me that for having a CLEAN phone, I should respect all these steps:
- Install the "full rom" KI3 (I don't if it's the right translation...). This ROM will completely reset my phone.
- Then install the rom KK5 to add new functions
- Flash CF-root LPG to obtain the admin authorizations and ICS 100% clean
- And finally I will able to flash CM9...
Is it really necessary to respect these steps???
Your 2 points of view are so different..
Thanks again!
-
Click to expand...
Click to collapse
You can't follow two masters!
Try ours first, and if it doesn't work well, then flash stock ROM
Sent from my GT-I9100 using Tapatalk 2
CM10: back to CM9
Jokesy said:
You can't follow two masters!
Try ours first, and if it doesn't work well, then flash stock ROM
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
OK I'll try. I'll come back to this post asap.
Have a nice weekend
primokorn said:
Thanks for your answer! Appreciated.
Please could you help me to find the better kernel for my I9100G?
FYI I now have the nightly dated 09/26.
Thanks again.
I kept the same kernel for all nightly since I'm under CM10. Why do I have this matter now?
Click to expand...
Click to collapse
Have you tried doing a fresh instal? Wipe all and start fresh...That usually works for me...
Be sure to back up your pic, music etc fist b4 doing the wipe.
darkluna said:
Have you tried doing a fresh instal? Wipe all and start fresh...That usually works for me...
Be sure to back up your pic, music etc fist b4 doing the wipe.
Click to expand...
Click to collapse
I finally installed CM9 directly to make a test. Wifi connection still doesn't work despite factory data + cache partition + dalvik cache...
I'm going to install ICS 4.0.4 and then CM9...
Hope...
CM9 installed but Wifi still doesn't work. The button for activation is more dark than the bluetooth one...
I need to install the ICS stock ROM...
Seriously, did open two threads for the same issue?
Sent from my GT-I9100 using Tapatalk 2
primokorn said:
CM9 installed but Wifi still doesn't work. The button for activation is more dark than the bluetooth one...
I need to install the ICS stock ROM...
Click to expand...
Click to collapse
K.
Did you mean your Wi-Fi is stuck?
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 06:42 PM ---------- Previous post was at 06:39 PM ----------
Seriously, did open two threads for the same issue?
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
K.
Did you mean your Wi-Fi is stuck?
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 06:42 PM ---------- Previous post was at 06:39 PM ----------
Seriously, did open two threads for the same issue?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yes Wi-fi couldn't be activated.
One thread was for the wifi matter and this one is to come back to CM9. I'll modify the 2nd thread asap.
EDIT : ICS 4.0.4 installed but I still have the problem with the Wifi connection...
Jokesy said:
Seriously, did open two threads for the same issue?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
This thread was to repare my wifi connection and the other one is to come back to CM9.
If needed, you can delete this thread because I decided to come back ti CM9 directly.
Thanks.
primokorn said:
This thread was to repare my wifi connection and the other one is to come back to CM9.
If needed, you can delete this thread because I decided to come back ti CM9 directly.
Thanks.
Click to expand...
Click to collapse
My problem is still here... I now have ICS 4.0.4, version I9100GXXLPV and IMM76D.XXLPY, kernel 3.0.8 [email protected]#2.
I did a factory reset and cache partition. Why do I still have some personal pictures in the memory?
Should I use this code : *2767*2878# = E2P Custom Reset. It could solve my problem of wifi...
Otherwise what could I do now?
Here are attached several screenshots from my phone (ICS and CM10).
Thanks.
primokorn said:
My problem is still here... I now have ICS 4.0.4, version I9100GXXLPV and IMM76D.XXLPY, kernel 3.0.8 [email protected]#2.
I did a factory reset and cache partition. Why do I still have some personal pictures in the memory?
Should I use this code : *2767*2878# = E2P Custom Reset. It could solve my problem of wifi...
Otherwise what could I do now?
Here are attached several screenshots from my phone (ICS and CM10).
Thanks.
Click to expand...
Click to collapse
Today I installed Gingerbread XXLB1 2.3.6 - March, 2012 - Version One Package. I had too much error messages so I decided to install ICS I9100GXXLPY 4.0.3 - July, 2012. I can reach the main menu with the weather, applications,...
However I still have an error message: (english translation from french) "the process com.android.phone has been stopped".
The network is available during 10 seconds then I have the below error message and the network icon (graph with 4 bars) is the sign "Forbidden".
I click on the error message "OK", the network starts again until the next error message...
I don't know what I could do now...
Thanks again.
I did a full wipe. No more error messages
But my wifi connection doesn't still work..........
primokorn said:
Today I installed Gingerbread XXLB1 2.3.6 - March, 2012 - Version One Package. I had too much error messages so I decided to install ICS I9100GXXLPY 4.0.3 - July, 2012. I can reach the main menu with the weather, applications,...
However I still have an error message: (english translation from french) "the process com.android.phone has been stopped".
The network is available during 10 seconds then I have the below error message and the network icon (graph with 4 bars) is the sign "Forbidden".
I click on the error message "OK", the network starts again until the next error message...
I don't know what I could do now...
Thanks again.
I did a full wipe. No more error messages
But my wifi connection doesn't still work..........
Click to expand...
Click to collapse
Flash your gingerbread firmware, and perform full wipe
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
Flash your gingerbread firmware, and perform full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed the GB firmware but I had too much error messages on the first Android icon (processus com.wssyncmldm, processus com.google.process.gapps, calendar and android.phone...) so I've flashed ICS.
primokorn said:
I've flashed the GB firmware but I had too much error messages on the first Android icon (processus com.wssyncmldm, processus com.google.process.gapps, calendar and android.phone...) so I've flashed ICS.
Click to expand...
Click to collapse
Did you perform factory reset??
Sent from my GT-I9100 using Tapatalk 2
Hi guys!
About 1 week ago everything worked well on my Galaxy SII GT-I9100 running cyanogenmod 10 rom android 4.1.2 . One day I wanted to check my calendar app. When I opened it suddenly the phone freezed and restarted. It was stuck on the boot up screen with 'Samsung galaxy S2 GT-I9100'. Then I tried to go into recovery mode and I couldn't, the phone just restarts it self and freezes on the boot up screen. After this I went into download mode and flashed the stock 4.0.4 and many other stock roms through odin just to see the phone starting up but it didn't.Till now I am searching for a solution and unluckily I didn't find any.
I am sorry if there are some similar threads out there but please help me. My warranty is void and I need your help guys.
Thanks you soo much and I hope you know a solution for my problem...
So can you start cwm ? Take out battery, wait three minutes, do cwm. This has always worked for me to get back into the game.
Conny84 said:
So can you start cwm ? Take out battery, wait three minutes, do cwm. This has always worked for me to get back into the game.
Click to expand...
Click to collapse
The problem is that I can't reach any recovery mode. I flashed a new CWM and I still can't get in any recovery mode
Please guys if anyone knows a thread with the same problem please give me a link. I can't use my phone for anything... (
Taher2012 said:
Please guys if anyone knows a thread with the same problem please give me a link. I can't use my phone for anything... (
Click to expand...
Click to collapse
can you get download mood?? If so flash a stock rom with odin
pasanjay said:
can you get download mood?? If so flash a stock rom with odin
Click to expand...
Click to collapse
Yes I flashed a ton of Rom versions (Jelly bean leak, 4.0.4, 4.0.3, 2.3.5) through odin and the phone reacts all the same like I didn't flash anything on it. And on every firmware I flashed I couldn't get into any recovery mode...
The fact is that you must wipe /data from recovery whole going to a stock rom, otherwise your phone will pause at the logo. Flash Siyah kernel, check if you can boot into recovery and do a factory reset.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
The fact is that you must wipe /data from recovery whole going to a stock rom, otherwise your phone will pause at the logo. Flash Siyah kernel, check if you can boot into recovery and do a factory reset.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Firstly thank you for your answer!
Well I did that too, but I will give it another try..
w/2+ gnedryii
Taher2012 said:
Please guys if anyone knows a thread with the same problem please give me a link. I can't use my phone for anything... (
Click to expand...
Click to collapse
Edit: I can't post outside links because I'm new, but search for Galaxy S GT-I9000: how to fix boot to recovery with Volume up+Power? over on the Android Stack Exchange site.
I was stuck in the CyanogenMod boot screen and this saved me:
URL edited.
This bit did it:
"Another try might be: Power off your phone. Hold Power, Vol Up and Home Button. Wait for galaxyS logo then release Power button! For me that is the proper combination."
we should call this "the calendar of death".
But yeah, keep flashing & wiping till it's up and running.
cobaltwo said:
Edit: I can't post outside links because I'm new, but search for Galaxy S GT-I9000: how to fix boot to recovery with Volume up+Power? over on the Android Stack Exchange site.
I was stuck in the CyanogenMod boot screen and this saved me:
URL edited.
This bit did it:
"Another try might be: Power off your phone. Hold Power, Vol Up and Home Button. Wait for galaxyS logo then release Power button! For me that is the proper combination."
Click to expand...
Click to collapse
Still stuck..but thank you
I don't think so
gastonw said:
we should call this "the calendar of death".
But yeah, keep flashing & wiping till it's up and running.
Click to expand...
Click to collapse
Well maybe...but I think it's not the calendars fault...It's cyanogenmods...
Taher2012 said:
Well maybe...but I think it's not the calendars fault...It's cyanogenmods...
Click to expand...
Click to collapse
No... Its not a CM problem, otherwise it would be in the known issues or people in the thread would have reported. It is a problem from your end. Are you flashing the correct GApps?
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
No... Its not a CM problem, otherwise it would be in the known issues or people in the thread would have reported. It is a problem from your end. Are you flashing the correct GApps?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yes I had flashed Gapps for Android 4.1.2 before and I updated CM many times before...
Taher2012 said:
Yes I had flashed Gapps for Android 4.1.2 before and I updated CM many times before...
Click to expand...
Click to collapse
Have you tried CM10.1?
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Have you tried CM10.1?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I don't know but I think I didn't try it. And now I'm unable to flash any rom from recovery only through odin.
Taher2012 said:
I don't know but I think I didn't try it. And now I'm unable to flash any rom from recovery only through odin.
Click to expand...
Click to collapse
Flash CM9 resurrection edition from cm9 thread via Odin. It will give you a working recovery from where you can flash CM10.1
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
The fact is that you must wipe /data from recovery whole going to a stock rom, otherwise your phone will pause at the logo. Flash Siyah kernel, check if you can boot into recovery and do a factory reset.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Just did a factory reset and re-a standard rom flashed through odins and it solved my problem my phone is now loading up ok. Thanks
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
There are a lot of stable roms. Do you want touchwiz based or AOSP based? I don't have an opinion on AOSP roms because I've barely used any of them.
For Samsung based roms, Shoman94's roms are very stable and popular. That's what I use as my daily driver. For ICS, use SHOstock2, but for the latest JB use SHOstock3.
Vintage144 said:
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
Click to expand...
Click to collapse
When you flash a new ROM you will have to wipe. Also that's caused by using a foreign kernel aka one from galaxys2root.com
Sent from my GS4 running CM11 Kandy Kane
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Vintage144 said:
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Click to expand...
Click to collapse
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Thank you, I got the siyah kernel from a thread here,when I first got the phone (off ebay )it did in fact have the wrong kernel,I used entropy flash back to get back,I guess I did something else,but I will use one of the roms you mentioned ,glad we have you here ,I've been messing with wp7 the last few years and finally getting back to android (cept been playing with boot loaders in a500)
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Strangely enough ,o couldn't get restore to work from cwm BUT there was a cwm app I had and when it came back all my backups were there I went back to one to get back to where I was,will flash the roms you talked about for sure at 20% now so will have to wait
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Click to expand...
Click to collapse
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
beneff said:
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
Click to expand...
Click to collapse
Please use the guide "how to flash custom binaries without incrementing the flash counter" which is a link in my signature.
Sent from my SGH-I777 using xda app-developers app
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Vintage144 said:
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
creepyncrawly said:
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
Click to expand...
Click to collapse
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
beneff said:
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
Click to expand...
Click to collapse
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Thank you very much creepy ,your page is awesome and your advice the shostock rom is great
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Click to expand...
Click to collapse
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
beneff said:
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
Click to expand...
Click to collapse
Any
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Any
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Thanks a million.
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.
Right i have a s3 rooted anyway i used to have resurrection remix rom loved it but wanted a change as someone told me s5 sensation was out so i wanted to see what the rom was like and what difference it was having s5 software on a s3 and it started out ok but i have noticed every now and again if your playing a games the phone will go to the main screen with no notice you could be texting someone and it goes back to the main screen. Normally to stop this i turn it off and back on again and it works ok but then 2hrs later it starts again.
My problem is i have tried installing Resurrection remix rom again as they have a new one and it keeps saying there's no data if i try to flash any s3 rom again no data how do i fix this?? I tried re-rooting it with odin and came back same result so then i have to go back to the s5 sensation so i have a working phone im stuck i dont know what to do..
i install a rom like this i wipe data/factory reset then wipe cache partition then wipe dalvik cache then install.
All advice help is welcome and appreciated
If i try and install other roms i either get status 7 or no context so had to go back to S5 sensation 7 just so i could use my phone... urgh
Jaffax said:
If i try and install other roms i either get status 7 or no context so had to go back to S5 sensation 7 just so i could use my phone... urgh
Click to expand...
Click to collapse
For the status 7 error flash the latest TWRP recovery or Philz.
For this download Rashr from the PS and flash the latest recovery (For TWRP→2.8.4.0 and for Philz→ 6.48.4)
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
For the status 7 error flash the latest TWRP recovery or Philz.
For this download Rashr from the PS and flash the latest recovery (For TWRP→2.8.4.0 and for Philz→ 6.48.4)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah did that and working fine now well it lets me install other roms woop so gone for s3 neat rom abit impressed but sure theres better out there cheers
Jaffax said:
Yeah did that and working fine now well it lets me install other roms woop so gone for s3 neat rom abit impressed but sure theres better out there cheers
Click to expand...
Click to collapse
Cheers
Sent from my GT-I9300 using XDA Free mobile app