Hi guys!
About 1 week ago everything worked well on my Galaxy SII GT-I9100 running cyanogenmod 10 rom android 4.1.2 . One day I wanted to check my calendar app. When I opened it suddenly the phone freezed and restarted. It was stuck on the boot up screen with 'Samsung galaxy S2 GT-I9100'. Then I tried to go into recovery mode and I couldn't, the phone just restarts it self and freezes on the boot up screen. After this I went into download mode and flashed the stock 4.0.4 and many other stock roms through odin just to see the phone starting up but it didn't.Till now I am searching for a solution and unluckily I didn't find any.
I am sorry if there are some similar threads out there but please help me. My warranty is void and I need your help guys.
Thanks you soo much and I hope you know a solution for my problem...
So can you start cwm ? Take out battery, wait three minutes, do cwm. This has always worked for me to get back into the game.
Conny84 said:
So can you start cwm ? Take out battery, wait three minutes, do cwm. This has always worked for me to get back into the game.
Click to expand...
Click to collapse
The problem is that I can't reach any recovery mode. I flashed a new CWM and I still can't get in any recovery mode
Please guys if anyone knows a thread with the same problem please give me a link. I can't use my phone for anything... (
Taher2012 said:
Please guys if anyone knows a thread with the same problem please give me a link. I can't use my phone for anything... (
Click to expand...
Click to collapse
can you get download mood?? If so flash a stock rom with odin
pasanjay said:
can you get download mood?? If so flash a stock rom with odin
Click to expand...
Click to collapse
Yes I flashed a ton of Rom versions (Jelly bean leak, 4.0.4, 4.0.3, 2.3.5) through odin and the phone reacts all the same like I didn't flash anything on it. And on every firmware I flashed I couldn't get into any recovery mode...
The fact is that you must wipe /data from recovery whole going to a stock rom, otherwise your phone will pause at the logo. Flash Siyah kernel, check if you can boot into recovery and do a factory reset.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
The fact is that you must wipe /data from recovery whole going to a stock rom, otherwise your phone will pause at the logo. Flash Siyah kernel, check if you can boot into recovery and do a factory reset.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Firstly thank you for your answer!
Well I did that too, but I will give it another try..
w/2+ gnedryii
Taher2012 said:
Please guys if anyone knows a thread with the same problem please give me a link. I can't use my phone for anything... (
Click to expand...
Click to collapse
Edit: I can't post outside links because I'm new, but search for Galaxy S GT-I9000: how to fix boot to recovery with Volume up+Power? over on the Android Stack Exchange site.
I was stuck in the CyanogenMod boot screen and this saved me:
URL edited.
This bit did it:
"Another try might be: Power off your phone. Hold Power, Vol Up and Home Button. Wait for galaxyS logo then release Power button! For me that is the proper combination."
we should call this "the calendar of death".
But yeah, keep flashing & wiping till it's up and running.
cobaltwo said:
Edit: I can't post outside links because I'm new, but search for Galaxy S GT-I9000: how to fix boot to recovery with Volume up+Power? over on the Android Stack Exchange site.
I was stuck in the CyanogenMod boot screen and this saved me:
URL edited.
This bit did it:
"Another try might be: Power off your phone. Hold Power, Vol Up and Home Button. Wait for galaxyS logo then release Power button! For me that is the proper combination."
Click to expand...
Click to collapse
Still stuck..but thank you
I don't think so
gastonw said:
we should call this "the calendar of death".
But yeah, keep flashing & wiping till it's up and running.
Click to expand...
Click to collapse
Well maybe...but I think it's not the calendars fault...It's cyanogenmods...
Taher2012 said:
Well maybe...but I think it's not the calendars fault...It's cyanogenmods...
Click to expand...
Click to collapse
No... Its not a CM problem, otherwise it would be in the known issues or people in the thread would have reported. It is a problem from your end. Are you flashing the correct GApps?
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
No... Its not a CM problem, otherwise it would be in the known issues or people in the thread would have reported. It is a problem from your end. Are you flashing the correct GApps?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Yes I had flashed Gapps for Android 4.1.2 before and I updated CM many times before...
Taher2012 said:
Yes I had flashed Gapps for Android 4.1.2 before and I updated CM many times before...
Click to expand...
Click to collapse
Have you tried CM10.1?
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Have you tried CM10.1?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I don't know but I think I didn't try it. And now I'm unable to flash any rom from recovery only through odin.
Taher2012 said:
I don't know but I think I didn't try it. And now I'm unable to flash any rom from recovery only through odin.
Click to expand...
Click to collapse
Flash CM9 resurrection edition from cm9 thread via Odin. It will give you a working recovery from where you can flash CM10.1
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
The fact is that you must wipe /data from recovery whole going to a stock rom, otherwise your phone will pause at the logo. Flash Siyah kernel, check if you can boot into recovery and do a factory reset.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Just did a factory reset and re-a standard rom flashed through odins and it solved my problem my phone is now loading up ok. Thanks
Related
My Galaxy Player bricked since I flashed "CF-ROOT for GT-I9000"(Because I selected the wrong file)
The screen touch response is reversed and the touch button doesn't work!
Please help me what to do!!!
The problem was solved!! Thanks Samwes's help
error01671 said:
My Galaxy Player bricked since I flashed "CF-ROOT for GT-I9000"(Because I selected the wrong file)
The screen touch response is reversed and the touch button doesn't work!
Please help me what to do!!!
Click to expand...
Click to collapse
Wait...so you flashed an I9000 kernel and it still booted? Maybe I will try investigating if we could just port kernels from the galaxy s phones.
But anyway..just boot into download mode and reflash one of the custom kernels for the 4.0.
Sent using Tapatalk
klin1344 said:
Wait...so you flashed an I9000 kernel and it still booted? Maybe I will try investigating if we could just port kernels from the galaxy s phones.
But anyway..just boot into download mode and reflash one of the custom kernels for the 4.0.
Sent using Tapatalk
Click to expand...
Click to collapse
I flashed STeVEs-3.0-EU kernel but it didn't fix my problem!!
I will post video and you can see the problem on my device.
I think a dev should make a sticky to bricks. They are coming up too often now.
Also if it booted, it's not bricked.
Chris4evernoob said:
I think a dev should make a sticky to bricks. They are coming up too often now.
Also if it booted, it's not bricked.
Click to expand...
Click to collapse
But I flash any stock rom or custom rom,even any custom kernel,can't fix my device.
Why would you flash a i9000 kernel on a YP-G1 ? What kernel did you flash, we're going to need that kernel to see what happened!
pmdisawesome said:
Why would you flash a i9000 kernel on a YP-G1 ? What kernel did you flash, we're going to need that kernel to see what happened!
Click to expand...
Click to collapse
I downloaded "CF-Root-JP6-v1.2-Busybox-1.17.1.zip"from http://forum.xda-developers.com/showthread.php?t=788108
The file which I prepared for my i9000,but when I' m going to flash my YP-G1 kernel,I selected the wrong file.
get odin, stock firmware, and flash the stock firmware with odin
I have the same problem since I've flashed a kernel for the Galaxy S.
My Galaxy player has not booted.
I have flashed Steves ROM and since that I have the same problems.
I've found so far no solution.
The flash of the stock firmware did not help.
I have also tested other ROMS.
Did you're player run 2.3 or 2.2 stock, because that would make a difference. If it ran 2.2 then therea you're problem isolated.
Infact I just noticed you said touch button, so are you sure its not US?
Sent from my YP-G70
Seresta said:
get odin, stock firmware, and flash the stock firmware with odin
Click to expand...
Click to collapse
I tried,but it doesn't work.
Samwes said:
Did you're player run 2.3 or 2.2 stock, because that would make a difference. If it ran 2.2 then therea you're problem isolated.
Infact I just noticed you said touch button, so are you sure its not US?
Sent from my YP-G70
Click to expand...
Click to collapse
The touch buttons that I mean is menu button and back button,not home button.
And I will try 2.2 stock,thanks.(I already ran 2.3 stock.)
error01671 said:
The touch buttons that I mean is menu button and back button,not home button.
And I will try 2.2 stock,thanks.(I already ran 2.3 stock.)
Click to expand...
Click to collapse
Which stock rom did you try?
zaclimon said:
Which stock rom did you try?
Click to expand...
Click to collapse
2.3.6 stock rom
Samwes said:
Did you're player run 2.3 or 2.2 stock, because that would make a difference. If it ran 2.2 then therea you're problem isolated.
Infact I just noticed you said touch button, so are you sure its not US?
Sent from my YP-G70
Click to expand...
Click to collapse
I just flash 2.2.1 stock rom and it fix my device!!! Thank you very much!
Without your advice,I won't flash into 2.2!(Because 2.3 is much better!)
Can you send me the link?
Gigadroid said:
Can you send me the link?
Click to expand...
Click to collapse
Here is the 2.2.1(INTL)stock rom download link : http://dl.dropbox.com/u/60441441/G1ZSKC5-REV01-PDA-low-CL976041.tar.zip
The link is from http://forum.xda-developers.com/showthread.php?t=1531850
Thank you.
I'll try it.
EDIT: Hooray, it worked.
Yes in this case when flashing with odin 2.2.1 rom is better at resolving problems then 2.3.6.
I was trying to root my att samsung s2 i777 and accidentally flashed/full wiped my phone into a i9100. This Basically disabled the 4 buttons on the bottom of the phone. Only 2 work, I guess the flash was of the international version which has only 3 buttons on the bottom. How can I flash back to i777 or how can I simply fix the 4 buttons on the bottom? I am new at this. Please help!
mynuddin said:
I was trying to root my att samsung s2 i777 and accidentally flashed/full wiped my phone into a i9100. This Basically disabled the 4 buttons on the bottom of the phone. Only 2 work, I guess the flash was of the international version which has only 3 buttons on the bottom. How can I flash back to i777 or how can I simply fix the 4 buttons on the bottom? I am new at this. Please help!
Click to expand...
Click to collapse
Just wipe and flash an i777 rom....
Sent from my Xoom using Tapatalk 2
Nick281051 said:
Just wipe and flash an i777 rom....
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
Alright I did that and now I face another problem. Every time i plug in a usb, the phone shuts off and goes into the charging menu. I tried factory resetting the phone and flashing the i777 rom again but I face the same problem still. how can I fix this?
mynuddin said:
Alright I did that and now I face another problem. Every time i plug in a usb, the phone shuts off and goes into the charging menu. I tried factory resetting the phone and flashing the i777 rom again but I face the same problem still. how can I fix this?
Click to expand...
Click to collapse
Are you using stock battery? What rom and kernel are you using?
122ninjas said:
Are you using stock battery? What rom and kernel are you using?
Click to expand...
Click to collapse
yes the battery is original(NFC). this problem did not occur when i got the phone. after i flashed it back to the i777 rom, everything is back to normal except for the charging problem. I'm on kernel 3.0.15-I777UCLE5-CL652575. i used to i777 stock rom from downloadandroidrom . any ideas of how to fix this?
mynuddin said:
yes the battery is original(NFC). this problem did not occur when i got the phone. after i flashed it back to the i777 rom, everything is back to normal except for the charging problem. I'm on kernel 3.0.15-I777UCLE5-CL652575. i used to i777 stock rom from downloadandroidrom . any ideas of how to fix this?
Click to expand...
Click to collapse
Don't go to other sites use the stickies here!!
Start Here. Read, and see what u can understand. Creepyncrawly has some great links in his signature. http://forum.xda-developers.com/showthread.php?t=1313659
I have been trying to flash NX-Kernel_v1.1.0 to my phone which is running Rootbox-JB-i9300-v3.9.1.
I have noticed that the file I am trying to flash is not a .tar, which is what I am use to, but a .zip.
When i use TWRP to attempt to flash it boots into download mode and does nothing.
I have also tried using odin and mobile odin but i think because its a .zip odin cannot even see it.
The thread is linked below. I have searched it and people seem to be saying that it is possible to flash with a recovery and odin/mobile odin, all of these i have tried.
Can someone please tell me what i am doing wrong!?!?
http://forum.xda-developers.com/showthread.php?t=2192893
just flash it from recovery like a rom
is the rom based on CM10.1?
Tried
Glebun said:
just flash it from recovery like a rom
is the rom based on CM10.1?
Click to expand...
Click to collapse
I have tried flashing from tw recovery it does not boot into system from there.
The rom is a AOKP base.
guspop said:
I have tried flashing from tw recovery it does not boot into system from there.
The rom is a AOKP base.
Click to expand...
Click to collapse
Why would a kernel made for galaxy note or note 2 work on a galaxy s3?
There are sure to be differences which will make it not boot.
Sent from my GT-I9300 using xda premium
oops, didn't see that. Of course it won't boot, you're lucky if you didn't kill it
First off, kernels cannot kill phones. Only corrupted or mismatched or blank boot loaders can.
ficti0n851 said:
Why would a kernel made for galaxy note or note 2 work on a galaxy s3?
There are sure to be differences which will make it not boot.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
b-eock said:
First off, kernels cannot kill phones. Only corrupted or mismatched or blank boot loaders can.
Click to expand...
Click to collapse
Wow thank you I cannot believe I didn't realise it was for the note.
b-eock said:
First off, kernels cannot kill phones. Only corrupted or mismatched or blank boot loaders can.
Click to expand...
Click to collapse
Hate to tell you it can. I bricked an S3 by accidently flashing an S2 kernel to it which bricked the device to the point that a jig would not even revive it.
That makes no sense if you think of the booting process... I mean crazy things happen. But a kernel should never fully brick a device...
guspop said:
I have been trying to flash NX-Kernel_v1.1.0 to my phone which is running Rootbox-JB-i9300-v3.9.1.
I have noticed that the file I am trying to flash is not a .tar, which is what I am use to, but a .zip.
When i use TWRP to attempt to flash it boots into download mode and does nothing.
I have also tried using odin and mobile odin but i think because its a .zip odin cannot even see it.
The thread is linked below. I have searched it and people seem to be saying that it is possible to flash with a recovery and odin/mobile odin, all of these i have tried.
Can someone please tell me what i am doing wrong!?!?
http://forum.xda-developers.com/showthread.php?t=2192893
Click to expand...
Click to collapse
Flash it w CWM. Should work
Sent from my SPH-L710 using xda app-developers app
b-eock said:
That makes no sense if you think of the booting process... I mean crazy things happen. But a kernel should never fully brick a device...
Click to expand...
Click to collapse
It does if the kernel is not for the proper chip set. Like a kernel for a qualcom chip flashed on an eyxnos chip.
jorv976 said:
Flash it w CWM. Should work
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
the issue has already been found. The kernel is for a different device.
It should only result in a soft brick... Bootloaders are the first to come (primary then secondary. Secondary passing the booting process off to the kernel. Recovery is in the kernel while DL mode is in the boot loaders.) Oh well. I make sure I don't do stuff like that. I'm really OCD and paranoid about stuff being just right.
b-eock said:
It should only result in a soft brick... Bootloaders are the first to come (primary then secondary. Secondary passing the booting process off to the kernel. Recovery is in the kernel while DL mode is in the boot loaders.) Oh well. I make sure I don't do stuff like that. I'm really OCD and paranoid about stuff being just right.
Click to expand...
Click to collapse
\Yeah thats what I thought as well. I was just rushing far more then I normally do and downloaded the same rom for both the S2 for my brother and my S3 and flashed the wrong one to mine. Boy was I not happy. Spent 3 days with some of the most talented developers here and we all agreed that jtag was the only hope.
Hey guys... this is a tough one...
I have a i9300, and it is rooted, and I use Carbon Rom (a AOSP ROM).
My brother bought one i9300 this week. He asked me to root it, and install Carbon Rom too.
Ok, so I rooted the phone, using CF-Root-SGS3-v6.4, via odin. After that, i flashed philz_touch_5.07.1-i9300 recovery, and used it to flash a zip with the AOSP ROM and Gapps. Well, after i flashed the ROM, the phone boots into Carbon, but reboots EVERY 30 SECONDS. I thought it could be a problem with the download, so i flashed the same file that i flashed on mine, but problem still persisted. Then, i tried to Restore on HIS phone, a Nandroid from MY phone. Same thing.... boots normal, and reboots after 30 seconds. At this point, i realized that his Baseband version was different from mine. (it was the only difference i could find). Mine is BUEMA1 and his was UBELL1.
So, i downloaded, from sammobile.com the latest firmware/radio for his carrier. After flashing it, the phone boots Normal into Stock ROM, but it freezes ALL the time. It freezes on normal uses, such as email, whatsapp, etc...
Could something be corrupt? What would it be? IMEI seems to be fine.
I cant think of anything that could cause reboot every 30 seconds on AOSP, and freeze on Stock
Read the Freezing thread .
jje
JJEgan said:
Read the Freezing thread .
jje
Click to expand...
Click to collapse
where is this? couldn't find it
1. Root it again.
2. Install CWM Revovery
3. Copy a Custom ROM & the rightful Gapps to your SD Card.
4. Boot into Recovery and Select the Option "Format System" or use this tweak: http://forum.xda-developers.com/showthread.php?t=1832326 (install it like you would with a ROM) It will Wipe Everything from your phones Internal Memory.
5. Install the Custom Rom first, then Gapps. Then boot up your phone.
I would suggest using CM10.1 for starters.
yurividal said:
where is this? couldn't find it
Click to expand...
Click to collapse
General
Sent from my GT-I9300 using Tapatalk 2
yurividal said:
Hey guys... this is a tough one...
I have a i9300, and it is rooted, and I use Carbon Rom (a AOSP ROM).
My brother bought one i9300 this week. He asked me to root it, and install Carbon Rom too.
Ok, so I rooted the phone, using CF-Root-SGS3-v6.4, via odin. After that, i flashed philz_touch_5.07.1-i9300 recovery, and used it to flash a zip with the AOSP ROM and Gapps. Well, after i flashed the ROM, the phone boots into Carbon, but reboots EVERY 30 SECONDS. I thought it could be a problem with the download, so i flashed the same file that i flashed on mine, but problem still persisted. Then, i tried to Restore on HIS phone, a Nandroid from MY phone. Same thing.... boots normal, and reboots after 30 seconds. At this point, i realized that his Baseband version was different from mine. (it was the only difference i could find). Mine is BUEMA1 and his was UBELL1.
So, i downloaded, from sammobile.com the latest firmware/radio for his carrier. After flashing it, the phone boots Normal into Stock ROM, but it freezes ALL the time. It freezes on normal uses, such as email, whatsapp, etc...
Could something be corrupt? What would it be? IMEI seems to be fine.
I cant think of anything that could cause reboot every 30 seconds on AOSP, and freeze on Stock
Click to expand...
Click to collapse
hi man , I was having this problem before , try to mega wipe then flash a stock rom via odin
Geaquzzil said:
hi man , I was having this problem before , try to mega wipe then flash a stock rom via odin
Click to expand...
Click to collapse
Mega Wipe... what would that be?
I guess it is this: http://forum.xda-developers.com/showthread.php?t=1983489
right?
Anyways, i have flashed a TouchWizz ROM called WanamLite... the phone is SUPER FAST, and freezing is gone.
Too bad he cant use a AOSP (I LOVE Carbon ROM)... but i will let it stick to WanamLite since it is working and rooted. I kind of gave up
yurividal said:
Mega Wipe... what would that be?
I guess it is this: http://forum.xda-developers.com/showthread.php?t=1983489
right?
Anyways, i have flashed a TouchWizz ROM called WanamLite... the phone is SUPER FAST, and freezing is gone.
Too bad he cant use a AOSP (I LOVE Carbon ROM)... but i will let it stick to WanamLite since it is working and rooted. I kind of gave up
Click to expand...
Click to collapse
Did you at least read my post?
DiDA™ said:
Did you at least read my post?
Click to expand...
Click to collapse
I did. Thank you very much.
The thing is, the phone is running so smooth with this WanamLite Rom, that i am afraid of touchung it and it start freezing again. Not even stock ROM was so smooth. It hasnt frozen in 2 days. But I will for sure try your suggestion if i start to see issues with this Rom too.
I would love to be able to run CarbonRom on his device, but i dont want to take the risk of "touching what is working", specially because it is not my device.
Anyways, i appreciate the help i have received on this forum. Seriously, thank you very much, to each one of you.
yurividal said:
I did. Thank you very much.
The thing is, the phone is running so smooth with this WanamLite Rom, that i am afraid of touchung it and it start freezing again. Not even stock ROM was so smooth. It hasnt frozen in 2 days. But I will for sure try your suggestion if i start to see issues with this Rom too.
I would love to be able to run CarbonRom on his device, but i dont want to take the risk of "touching what is working", specially because it is not my device.
Anyways, i appreciate the help i have received on this forum. Seriously, thank you very much, to each one of you.
Click to expand...
Click to collapse
With a wipe it will work too. If u have PhilZ u can select in reset menu "Clean to install a new ROM".
Gesendet von meinem GT-I9300 mit Tapatalk 2
TheRealFelix0212 said:
With a wipe it will work too. If u have PhilZ u can select in reset menu "Clean to install a new ROM".
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
I did this... Several times
yurividal said:
I did this... Several times
Click to expand...
Click to collapse
Strange.. On my device it works fine.
Gesendet von meinem GT-I9300 mit Tapatalk 2
TheRealFelix0212 said:
Strange.. On my device it works fine.
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
I know, on mine too. The problem is with my brother's.
Are you certain they are both i9300s
Sent from my GT-I9300 using xda app-developers app
ads2996 said:
Are you certain they are both i9300s
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
100% positive
You need to check its not a fake / clone first .
Settings about phone details .
jje
JJEgan said:
You need to check its not a fake / clone first .
Settings about phone details .
jje
Click to expand...
Click to collapse
It is deffinetely a Genuine Samsung device...
Whenever I install a rom my 10.1 wifi starts bootlooping, and whenever I use a stock version it freezes and crashes a lot, is there anyway to fix this?
arboy2 said:
Whenever I install a rom my 10.1 wifi starts bootlooping, and whenever I use a stock version it freezes and crashes a lot, is there anyway to fix this?
Click to expand...
Click to collapse
I managed to install CM9 on it but it says gapps crashed every time and it restart itself and repeats
Make sure you are getting a clean flash... wipe data, cache, dalvik cache.. and then go to mounts( in cwm ) or advanced( TWRP ) and wipe system ( format it in cwm )
Also make sure you have a good download.. that can cause many different issues... from boot loops to force closes.
@arboy2
Gil81 said:
Make sure you are getting a clean flash... wipe data, cache, dalvik cache.. and then go to mounts( in cwm ) or advanced( TWRP ) and wipe system ( format it in cwm )
Also make sure you have a good download.. that can cause many different issues... from boot loops to force closes.
@arboy2
Click to expand...
Click to collapse
Do you have a good download or a better rom or even a good md5 to flash to go back to stock?
I am having a lot of problems with this tablet, sometimes it crashes, it bootloops, sometimes it just freezes and sometimes I need to force restart it so much times till it boots properly because it freezes while booting a lot.
also whenever I connect it to the PC it seems to have problems.
It used to be my sister's so I fear she broke it
Thanks for the reply
@arboy2
You can find the stock rom at sammobile.com
Also.. make sure you have an ICS bootloader... almost all the custom roms require that bootloader. You can find it at pershoot's site and flash it with Odin.
As far as good download's with md5's go.. this forum doesn't seem to use them as much as most forum's. So what I do is download a rom twice and check the md5's against each other.. that's not the best way, as you could have 2 bad download's, but it's something.. lol
If you can't find the stock 4.0.4 ICS rom at sammobile... I think I have it.. somewhere I also have the ICS bootloader..
But if you're new to flashing and Odin... I highly recommend doing some reading and watch QBKings' video's..
I would also recommend(once you know that you have the ICS bootloader)that you use the infamous TWRP recovery.. it is the best recovery for this device ( I believe )..
ICS boot loader here http://droidbasement.com/galaxy/roms/cm10.1/p4wifi/US_LPL_4.0.4_bootloader.zip for p4wifi
Sent from my GT-P7500 using XDA Premium 4 mobile app
Do you know where I can find a proper stock 3.2 firmware
arboy2 said:
Do you know where I can find a proper stock 3.2 firmware
Click to expand...
Click to collapse
I got a cwm backup of my device p4 but yours is the WiFi right ?
here is link for 4.0.4 http://www.hotfile.com/dl/165091178/ea77c7f/P7510XXLPH_P7510XEULPH_XEU.zip.html
I'll see if I can find a 3.2 for ya
http://forum.xda-developers.com/showthread.php?t=1651794 list of ROMs
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
I got a cwm backup of my device p4 but yours is the WiFi right ?
here is link for 4.0.4 http://www.hotfile.com/dl/165091178/ea77c7f/P7510XXLPH_P7510XEULPH_XEU.zip.html
I'll see if I can find a 3.2 for ya
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Yeah mine is the Wifi and I need a 3.2 version because I'm going to return it to samsung see if they can fix it, we actually got it broken from them
There is stock 4.0.4 so why not say you updated it via kies, its stock so it should be fine. been looking for a 3.2 andi can't just find a stock image just yet
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 10:50 PM ---------- Previous post was at 10:23 PM ----------
arboy2 said:
Yeah mine is the Wifi and I need a 3.2 version because I'm going to return it to samsung see if they can fix it, we actually got it broken from them
Click to expand...
Click to collapse
3.2 stock http://hotfile.com/dl/140028924/bc38255/GT-P7510_XAB_P7510UEKMP_P7510XABKMP_P7510UEKMP.zip.html
password = sampro.pl
and here is the boot loader for honeycomb http://db.tt/gmU23ylV
hope this helps you get back to stock
remember thanks button only a click away ( if it works he he)
Sent from my GT-P7500 using xda app-developers app