Right i have a s3 rooted anyway i used to have resurrection remix rom loved it but wanted a change as someone told me s5 sensation was out so i wanted to see what the rom was like and what difference it was having s5 software on a s3 and it started out ok but i have noticed every now and again if your playing a games the phone will go to the main screen with no notice you could be texting someone and it goes back to the main screen. Normally to stop this i turn it off and back on again and it works ok but then 2hrs later it starts again.
My problem is i have tried installing Resurrection remix rom again as they have a new one and it keeps saying there's no data if i try to flash any s3 rom again no data how do i fix this?? I tried re-rooting it with odin and came back same result so then i have to go back to the s5 sensation so i have a working phone im stuck i dont know what to do..
i install a rom like this i wipe data/factory reset then wipe cache partition then wipe dalvik cache then install.
All advice help is welcome and appreciated
If i try and install other roms i either get status 7 or no context so had to go back to S5 sensation 7 just so i could use my phone... urgh
Jaffax said:
If i try and install other roms i either get status 7 or no context so had to go back to S5 sensation 7 just so i could use my phone... urgh
Click to expand...
Click to collapse
For the status 7 error flash the latest TWRP recovery or Philz.
For this download Rashr from the PS and flash the latest recovery (For TWRP→2.8.4.0 and for Philz→ 6.48.4)
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
For the status 7 error flash the latest TWRP recovery or Philz.
For this download Rashr from the PS and flash the latest recovery (For TWRP→2.8.4.0 and for Philz→ 6.48.4)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah did that and working fine now well it lets me install other roms woop so gone for s3 neat rom abit impressed but sure theres better out there cheers
Jaffax said:
Yeah did that and working fine now well it lets me install other roms woop so gone for s3 neat rom abit impressed but sure theres better out there cheers
Click to expand...
Click to collapse
Cheers
Sent from my GT-I9300 using XDA Free mobile app
Related
Hey, asking here as i am new and xda wont let me post in their specific forum...anyways, tried to install newest neatRom, and did ROMnuke before that..got "installation aborted (bad)"...any idea where is the problem? I m coming from cm 10.1...
solved
Truman82 said:
Hey, asking here as i am new and xda wont let me post in their specific forum...anyways, tried to install newest neatRom, and did ROMnuke before that..got "installation aborted (bad)"...any idea where is the problem? I m coming from cm 10.1...
Click to expand...
Click to collapse
Problem was solved by freeing more space and installing Philz kernel
I have neatrom 4.0. Flashed 4.1 and now i don´t have multiwindow, the top bar has dissapear and i can´t change the wallpaper.
Have tried with and without wipe.
Any ideas?
jona_baires said:
I have neatrom 4.0. Flashed 4.1 and now i don´t have multiwindow, the top bar has dissapear and i can´t change the wallpaper.
Have tried with and without wipe.
Any ideas?
Click to expand...
Click to collapse
what rom are you coming from ?
what kind of wipe did you do ?
I tried full wipe (data and cache).
Coming from neatrom 4.0.
Sent from my GT-I9100 using XDA Premium HD app
Update: after installing the ROM, phone told me my sim card couldn't be found.. Same problem which made me root the phone in the first place. I mean the stock ROM had very same issue on my phone. I tried few different modems, no luck. On top of that I got extended battery kit and the new ROM ate battery from 100% to 0% in one night in idle mode. Went back to cm10.1, now all working again
Sent from my GT-I9100 using xda app-developers app
Whenever I install a rom my 10.1 wifi starts bootlooping, and whenever I use a stock version it freezes and crashes a lot, is there anyway to fix this?
arboy2 said:
Whenever I install a rom my 10.1 wifi starts bootlooping, and whenever I use a stock version it freezes and crashes a lot, is there anyway to fix this?
Click to expand...
Click to collapse
I managed to install CM9 on it but it says gapps crashed every time and it restart itself and repeats
Make sure you are getting a clean flash... wipe data, cache, dalvik cache.. and then go to mounts( in cwm ) or advanced( TWRP ) and wipe system ( format it in cwm )
Also make sure you have a good download.. that can cause many different issues... from boot loops to force closes.
@arboy2
Gil81 said:
Make sure you are getting a clean flash... wipe data, cache, dalvik cache.. and then go to mounts( in cwm ) or advanced( TWRP ) and wipe system ( format it in cwm )
Also make sure you have a good download.. that can cause many different issues... from boot loops to force closes.
@arboy2
Click to expand...
Click to collapse
Do you have a good download or a better rom or even a good md5 to flash to go back to stock?
I am having a lot of problems with this tablet, sometimes it crashes, it bootloops, sometimes it just freezes and sometimes I need to force restart it so much times till it boots properly because it freezes while booting a lot.
also whenever I connect it to the PC it seems to have problems.
It used to be my sister's so I fear she broke it
Thanks for the reply
@arboy2
You can find the stock rom at sammobile.com
Also.. make sure you have an ICS bootloader... almost all the custom roms require that bootloader. You can find it at pershoot's site and flash it with Odin.
As far as good download's with md5's go.. this forum doesn't seem to use them as much as most forum's. So what I do is download a rom twice and check the md5's against each other.. that's not the best way, as you could have 2 bad download's, but it's something.. lol
If you can't find the stock 4.0.4 ICS rom at sammobile... I think I have it.. somewhere I also have the ICS bootloader..
But if you're new to flashing and Odin... I highly recommend doing some reading and watch QBKings' video's..
I would also recommend(once you know that you have the ICS bootloader)that you use the infamous TWRP recovery.. it is the best recovery for this device ( I believe )..
ICS boot loader here http://droidbasement.com/galaxy/roms/cm10.1/p4wifi/US_LPL_4.0.4_bootloader.zip for p4wifi
Sent from my GT-P7500 using XDA Premium 4 mobile app
Do you know where I can find a proper stock 3.2 firmware
arboy2 said:
Do you know where I can find a proper stock 3.2 firmware
Click to expand...
Click to collapse
I got a cwm backup of my device p4 but yours is the WiFi right ?
here is link for 4.0.4 http://www.hotfile.com/dl/165091178/ea77c7f/P7510XXLPH_P7510XEULPH_XEU.zip.html
I'll see if I can find a 3.2 for ya
http://forum.xda-developers.com/showthread.php?t=1651794 list of ROMs
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
I got a cwm backup of my device p4 but yours is the WiFi right ?
here is link for 4.0.4 http://www.hotfile.com/dl/165091178/ea77c7f/P7510XXLPH_P7510XEULPH_XEU.zip.html
I'll see if I can find a 3.2 for ya
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Yeah mine is the Wifi and I need a 3.2 version because I'm going to return it to samsung see if they can fix it, we actually got it broken from them
There is stock 4.0.4 so why not say you updated it via kies, its stock so it should be fine. been looking for a 3.2 andi can't just find a stock image just yet
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 10:50 PM ---------- Previous post was at 10:23 PM ----------
arboy2 said:
Yeah mine is the Wifi and I need a 3.2 version because I'm going to return it to samsung see if they can fix it, we actually got it broken from them
Click to expand...
Click to collapse
3.2 stock http://hotfile.com/dl/140028924/bc38255/GT-P7510_XAB_P7510UEKMP_P7510XABKMP_P7510UEKMP.zip.html
password = sampro.pl
and here is the boot loader for honeycomb http://db.tt/gmU23ylV
hope this helps you get back to stock
remember thanks button only a click away ( if it works he he)
Sent from my GT-P7500 using xda app-developers app
Hello,
after epic fail(attempt) to install CyanogenMod 7.2 i've bricked my phone...
- I can't restore my last ROM from clockworkrecovery
- my windows doesn't reconize the phone, i tryed different drivers/samsung kies and so on, but nothing worked, i keep getting this
my phone is currently in downloading mode and i got everything sorted (odin3 v1.85, PDA etc) but i can't get to it... Any help will be appericiated, thanks in advance.
Here is a pic:
img34.imageshack . us/img34/6538/pdr6.png
EDIT: I fixed it by putting the usb cabel when the phone is not turned off, weird... anyway i tryed flashing CyanogenMod again and i bricked it again lol, i did evrything just like the guy on the video, any suggestions?
Do these
1.Search for Multiformater Tool (Link is broken in that Op so go to.last post some had reuploaded)
2.Goto CWM and then flash that zip in that zip.choose Format data all to RFS 2nd Option
3.And then Goto Stock Recovery (Red one) Do wipe data/cache
4.Now you can Restore your Backup of Custom Rom
5.Thats it if you want to goto CM7.2 Then just Follow beil's video After Doing Wipe data /cache in Stock recovery
Thats it
Sent from my GT-S5830i using xda app-developers app
Thanks a lot, but i think i'll give up on Cyanogen after giving me such a bad headache, lol.
Any suggestions for other ROM's though? I just want the phone to work smooth/without lag and to play some games.
thgm21 said:
Thanks a lot, but i think i'll give up on Cyanogen after giving me such a bad headache, lol.
Any suggestions for other ROM's though? I just want the phone to work smooth/without lag and to play some games.
Click to expand...
Click to collapse
See Buddy we cant suggest you Rom which is good or not in which probably you do search yourself because every one has different test
Hitesh2626 said:
See Buddy we cant suggest you Rom which is good or not in which probably you do search yourself because every one has different test
Click to expand...
Click to collapse
Actually he said suggest, not which is the best so it's OK.
You can try Touchwiz Resurrection if you like TouchWiz UI and also smoothness. But if you like Holo you can go for Cosmic v2 for simplicity or AceJB.
Sent from my GT-S5830i using Tapatalk 2
Thank you a lot, one more thing i wanna ask:
Is there anyway to hard-brick my phone by trying out ROM's? And is there any point of boosters like pureperfomance X/or kernels(and which ones you suggest me to use) for the custom ROM?
thgm21 said:
Thank you a lot, one more thing i wanna ask:
Is there anyway to hard-brick my phone by trying out ROM's? And is there any point of boosters like pureperfomance X/or kernels(and which ones you suggest me to use) for the custom ROM?
Click to expand...
Click to collapse
So far, our phones can't be hard bricked by installing our ROMs or kernels. Phone can be hard bricked when you use ROM Manager or when you install other roms of different devices.
Sent from my GT-S5830i using Tapatalk 2
Hey everyone
Does anyone know of a custom rom for samsung galaxy mega 6.3 i527M (Canadian Telus/Bell/Rogers) I tried the tutorial on CM10 for i9200 i belive it is but keep getting status 7 in CWM and zip verification failed on TWRP so I am not sure if im doing something wrong? I install the same way I always have installed roms.
Thanks
Shadow
shadow1179 said:
Hey everyone
Does anyone know of a custom rom for samsung galaxy mega 6.3 i527M (Canadian Telus/Bell/Rogers) I tried the tutorial on CM10 for i9200 i belive it is but keep getting status 7 in CWM and zip verification failed on TWRP so I am not sure if im doing something wrong? I install the same way I always have installed roms.
Thanks
Shadow
Click to expand...
Click to collapse
I am new to the Mega, but status 7 usually means your recovery needs updating
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
I am new to the Mega, but status 7 usually means your recovery needs updating
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
That is woerd because Im using a tutorial that others wiith another version of mega works fine and I uused the recovery included in thread with the rom maybe I will try flashing newer recovery see if ot helps thanks
**EDIT** Cant seem to find a newer version :S here is a link to the procedure I used
http://forum.xda-developers.com/showthread.php?t=2566642
Sent from my SGH-I527M using xda app-developers app
shadow1179 said:
That is woerd because Im using a tutorial that others wiith another version of mega works fine and I uused the recovery included in thread with the rom maybe I will try flashing newer recovery see if ot helps thanks
**EDIT** Cant seem to find a newer version :S here is a link to the procedure I used
http://forum.xda-developers.com/showthread.php?t=2566642
Sent from my SGH-I527M using xda app-developers app
Click to expand...
Click to collapse
You need silesh Nair's version of twrp or cwm if your flashing kitkat.......look in his signature for it. If it works for your mega I dunno as I have a i9205
2SHAYNEZ
All 3 roms the AOKP, PA, and the CM11 in the android development forum all work on the i527m Canadian version of the mega and works on all carriers in Canada..but do use any roms that have the codename "crater" as those are for the mega 5.8 inch versions and will not work on the mega 6.3 inch and could brick it..but any with the codename "melius" in the rom title you are good to go with.
http://forum.xda-developers.com/galaxy-mega/orig-development
Sent from my SGH-I527M Mega 6.3
Thanks everyone for your help however I took the original one redownoaded everything and basically jsut started back at square one
back up again, factory restore again clear cache and install newly downloaded zip file that was just released and it worked
thanks again everyone
**EDIT** I did a CWM backup is there anyway to pull the SMS messages etc from this back up and leave the OS as the CM?? or do i need to restore and backup seperatly on comp and go back to CM after??
shadow1179 said:
Thanks everyone for your help however I took the original one redownoaded everything and basically jsut started back at square one
back up again, factory restore again clear cache and install newly downloaded zip file that was just released and it worked
thanks again everyone
Click to expand...
Click to collapse
Nice to hear and enjoy! :good:
so I got this galaxy s5 (free) to replace the S4 I had.. I'm on AT&T and the S5 is a T-Mobile device.. I unlocked and am currently using on AT&T without any issues.. I tried Cyanogenmod 12 on it.. had way too many Bluetooth music issues.. so I switched back to a rooted t-mobile stock.. which is terrible.. bluetooth music works great but everything is is painfully slow.. so I want to find a good fast custom rom (that also has proper bluetooth music support).. With so many device versions and so many custom roms I'm just a bit perplexed.. I found some that are debloated stock roms which seem like that would be good. but I'm just a bit confused on what parts I need to have as "t-mobile g900t" and which parts I don't have to have that way? so yeah this is a bit of a newbie question (even though I have run 4 or 5 custom roms in the past (original galaxy s and my s4 both had custom roms). .but those were always at&t devices on at&t network.. so was an easier choice..
at any rate.. looking for some tips on how to best find the right rom.. Would love to do this today/tomorrow.. avoid messing with the phone during the work week..
Thanks in advance!!
Gary
Try the latest stock ROM for the phone. Many of us were having issues with lag with prior 5.1.1 ROMS. The latest ROM has fixed all these issues. Very snappy.
i feel like i remember seeing bluetooth/audio fixes & updates in the CM13 nightly changelogs, you also didnt specify which CM 12 you installed... the last 12.1 snapshot from october or the last nightly from december?
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
much improved deep sleep battery means crap & full of bugs? i'm over a week behind on nightlies & there arent that many bugs... http://www.cmxlog.com/13/klte/ things are improving all the time, only CM 12.1 is stuck... but the last december nightly isnt buggy either
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
gpinkham said:
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
Click to expand...
Click to collapse
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Click to expand...
Click to collapse
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
gpinkham said:
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
Click to expand...
Click to collapse
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....]
Click to expand...
Click to collapse
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
gpinkham said:
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
Click to expand...
Click to collapse
Get any phone info app and check and see if your bootloader ends in pe1 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using XDA-Developers mobile app
S.N [user=2501176 said:
@.k.[/user]3;67525688]Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using
I'm sorry you are correct I meant pe1 pe3 is for the Note 4. I've been working with a friends note 4 past few days. Thanks for catching my error . Hate giving wrong advice... original post edited...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.[/URL]
Click to expand...
Click to collapse
thanks for sticking with me on the all the newbie questions.. bootloader version reported as G900TUV1FOG6.. later in the list it shows Latest Firmware: G900TUVUGPE1/G900TTMBGPE1/G900TUVU1GPE1.. so at first I was thinking I was ok.. but that second entry had me wondering.. (dang.. just noticed this was never submitted (from 6/28).. oh well)..
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
gpinkham said:
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
Click to expand...
Click to collapse
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Click to expand...
Click to collapse
OK.. you may be right.. I downgraded TWRP to 3.0.0 and the install started working fine.. but now the reboot into Phoenix has been going for about 35 mins.. I know it can take some time but that seems extreme.. will wait a bit longer and if it doesn't work I'll try the steps you listed above..
thanks again
Gary
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware.
Click to expand...
Click to collapse
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
gpinkham said:
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
Click to expand...
Click to collapse
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
gpinkham said:
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
Click to expand...
Click to collapse
Gary look in this general section for the post that instructs you how to install factory mm. Follow the guide. Google to see how to install factory tar files using Lunix . I'm guessing my instructional writing skills leave something to be desired lol . Once you have the factory mm up and running install Twrp flash superuser reboot. Than reboot into recovery flash phoenix rom. Good good
Sent from my SM-G935F using XDA-Developers mobile app