After trying for hours to flash a new rom and do a factory reset on the phone I gave up. I managed to restore a factory one but it did the same thing.
So I was trying to copy files from the gusto 2 and I am guessing I copied a wider range than what I was supposed to. I copied a range NV items over to the HTC from the Gusto 2 but after rebooting and deactivating airplane mode (I was able to go to settings at this point) it tried to connect and it just rebooted instead. After that, it kept rebooting once it reached the welcome screen.
I was able to follow various tutorials on how to flash roms and it would complete successfully, once that was done the rom would load, in this case 'Viper4G_3.1.7" and it would take time at the animation screen and then reach home screen, after that the three bottom lights would glow and the phone just crashes and stays there forever, no reboot or anything, just cashed, after a hard reboot it would not reach home screen but get stuck at animation screen and crash there as well. First, the bottom lights would glow and then short after it would stop animating indicating a crash. I'm running twrp 2.6.0.0 jewel.
Any ideas of why this is happening; I'm assuming those NV files get replaced unless the roms don't touch those files. I did a full wipe and then install from internal, and tried external sd as well. Both appear to be doing the same thing.
Here is a pic of my bootloader screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I'm guessing everyone is clueless about this version? As you can see I'm s-off and viper4G can be installed s-on. Everything installs smoothly but I can't get it to boot properly.
I'm thinking since you're S-off you can try running VipeRUU, which will return your phone back to completely stock, locked & S-on. I would try that and start over.
FinZ28 said:
I'm thinking since you're S-off you can try running VipeRUU, which will return your phone back to completely stock, locked & S-on. I would try that and start over.
Click to expand...
Click to collapse
I was able to load a stock RUU and I know this because it loaded up like before but it does the same thing. Just boot loop of death. and I meant to say that I'm s-on. I tried DirtyRacun and got to the step where the RUU is loaded and unlock the phone. after that, it rebooted to the phone and it just boot looped as you can see on the video, making me unable to finish the last step which is to activate babyracun by activating usb debugging and running the command using Ubuntu. http://youtu.be/XTLXG26lK68
Related
Well i think I have screwed up beyond repair.Yesterday I had sucessfully rooted my new s4 that came with VRUAMDK. just rooted no custom roms or anything. I then loaded Titanium backup and froze the verizon update app. Installed Goo Manager and made a nandroid backup with TWRP.
Today I froze the Weather widget app among others. Decided I wanted the weather widget back, so I defrosted it. It WOULD NOT come back. So I defrosted everything. Still no weather widget. Then I thought I would just unroot and go back to stock. Followed Dark Menace's Pm instructions and followed them to the letter. When I rebooted from using superSu to unroot. I noticed a notifcation that a software update was available, obviously it was since it was unfrozen. I did not click it. But a few seconds later my phone reboots into recovery mode with TWRP I thought that was very strange. Upon completion,and booting it said "Android is being updated" Well at that point I was sick! Sure enough now I'm at VRUAME7.
What can I do? probably nothing correct?
Oh and a few minutes after all this a popup said "software update failed to complete nothing was changed" or some-such. But I'm still at me7 and I have a unlocked padlock on bootup
Lesson learned don't screw with it if it aint broke!
Oh I STILL don't have my weather widget back.
I appreciate any assistance.
Thanks,
EDIT:
I'm not really broke about being on ME7 its just that I wish I could get rid of the padlock on boot and wipe all the backups (nandroid) just in case the phone dies. At this point it will just be a paperweight.
Would a wipe data/factory reset at least get me all the way onto me7? I seem to be stuck somewhere in between.
Here's where I'm at now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fixed!
Flashe VRUAME7 stock restore --> booted up with padlock --> rebooted in recovery mode --> wipe cache --> booted without padlock! Now at ME7 with no update errors --> did factory reset to get rid of all the twrp and TiBU files. So at least it is working fine now.
Thanks for all the info on the site!
My phone is an HTC One M8 running Android Revolution HD and TWRP Recovery. I recently downloaded Multirom thinking that I could hold multiple roms just by downloading the app. The app told me to reboot into Recovery mode to finish installation, and I rebooted into recovery. The only roms that were available to boot in was Internal so I just chose that. Turns out Internal will always get me stuck into the htcONE boot screen even after 1 day of waiting. If I try to go into bootloader mode and go into factory reset, it brings me back to the MultiROM menu everytime. I cannot even access the phone from the computer to edit the files. Please help, thanks!
@sangothemango
When you say when you try booting into bootloader do you mean your recovery as far as doing a factory reset?
Try power+volume-up till it goes dark and as soon as it goes dark just hold volume-down till the actual hboot/bootloader comes up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you can get the above example type of screen to come up than you can save your device. Hopefully your familiar with adb/fastboot cause that's what's going to fix it.
Unless you already have S-OFF ?
Yes I can get into that screen, but if I choose anything, it says going into recovery mode and then nothing happens.
sangothemango said:
Yes I can get into that screen, but if I choose anything, it says going into recovery mode and then nothing happens.
Click to expand...
Click to collapse
Do you have S-OFF ?
Supercid?
Sam issue
jball said:
Do you have S-OFF ?
Supercid?
Click to expand...
Click to collapse
I also have same problem but I have S-ON, What should i do.
sarfaraj2488 said:
I also have same problem but I have S-ON, What should i do.
Click to expand...
Click to collapse
You have the M8 EYE not the M8 !!!
sarfaraj2488 said:
I also have same problem but I have S-ON, What should i do.
Click to expand...
Click to collapse
What did you do exactly to end up in a bootloop ?
Sent from my HTC One M8 using Tapatalk
So I flashed a unofficial lollipop rom for my m8, but then I found it slow and buggy, so I went back to TWRP and restore it back to my GPE 4.4.4. However, when I boot it back, it turns out like this, I think it is bricked. When I plug it into the computer, the computer detects the phone, but it adb does not, probably because I did not turn on debugging in the lollipop rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I try to go back to bootloader. When I enter bootloader, it automatically jumps to HBOOT, checking something, and pops up this page. If I hit "yes", then it fix it and reboot, but when I come back to bootloader, it still jumps to this page. If I hit no, same thing. When I plug it into the computer, the computer doesn't detect the phone at all.
So I am stuck, any solution please?
thousight said:
So I flashed a unofficial lollipop rom for my m8, but then I found it slow and buggy, so I went back to TWRP and restore it back to my GPE 4.4.4. However, when I boot it back, it turns out like this, I think it is bricked. When I plug it into the computer, the computer detects the phone, but it adb does not, probably because I did not turn on debugging in the lollipop rom.
Then I try to go back to bootloader. When I enter bootloader, it automatically jumps to HBOOT, checking something, and pops up this page. If I hit "yes", then it fix it and reboot, but when I come back to bootloader, it still jumps to this page. If I hit no, same thing. When I plug it into the computer, the computer doesn't detect the phone at all.
So I am stuck, any solution please?
Click to expand...
Click to collapse
When you are on the second screen, does your computer pick it up?
No unfortuanately
Take the external sdcard out and put it in another device,you need to move/remove the "0P6BIMG.zip" file .once file is removed put the sdcard back in your phone or you can boot hboot without it even and the rest of the options should be there like normal
thousight said:
I think it is bricked.
Click to expand...
Click to collapse
If the screen comes on its not bricked.
thousight said:
When I plug it into the computer, the computer detects the phone, but it adb does not, probably because I did not turn on debugging in the lollipop rom.
Click to expand...
Click to collapse
You need to be in recovery for adb to work. USB Debugging only makes a difference if you are trying to connect adb when the OS is booted (which is obviously not the case for you).
As mentioned above, you just need to stop it from trying to update. After that, you probably just need to get a known good ROM on the phone or SD and flash in TWRP. Or at worst, you may need to re-install TWRP and/or update to a newer TWRP version if its outdated.
I had the same problem yesterday and removed the 0P6BIMG.zip file like jball said rebooted 2 or 3 times more and reloaded TWRP and venom one. Now I'm replying with that phone.
Hi, i tried to do the wire downgrade 4 years ago but failed lol
Got stuck on a bootloop to bootloader, i tried some ruus but none work. I can not access recovery, do factory reset or anything. When i plug in the phone to charge it goes to bootloader stays there.
I find out that 3d swit check somehow turns the security warning on don't know if thats something to work with, maybe security down haha
So no recovery to flash, no ruu to reset, not able to do factory reset, and most links are dead for is an olf phone. ??Help!! I like this phone and would like to at least boot even if no s-off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G900P using XDA-Developers Legacy app
toker562 said:
Hi, i tried to do the wire downgrade 4 years ago but failed lol
Got stuck on a bootloop to bootloader, i tried some ruus but none work. I can not access recovery, do factory reset or anything. When i plug in the phone to charge it goes to bootloader stays there.
I find out that 3d swit check somehow turns the security warning on don't know if thats something to work with, maybe security down haha
So no recovery to flash, no ruu to reset, not able to do factory reset, and most links are dead for is an olf phone. Help!! I like this phone and would like to at least boot even if no s-off
View attachment 4093394View attachment 4093395View attachment 4093396
HI,
I had the same problem yesterday . What i did. i Unlocked bootloder, flashed in a a custom recovery (Philz Touch 6). The installet custom ROM. But phone was stuck in boot screen so i flashed boot.img myself form ROM file.
Here is site were you can get some files for this device downloadandroidrom.com and try out
P.S i have the same HBoot and S-on
Click to expand...
Click to collapse
Hi, I have someone's old s7 edge which I'd like to use in place of my A10e lol, it still has their password on it tho. The screen seems to have some really weird issues, if I power it on using the home button or power button half the time the screen will be extremely dim/green and half of it will flicker. It looks and works perfectly fine the rest of the time though. I got it to the "recovery booting" screen, but the screen just flashes then goes near-black (still slightly glowing, doesn't turn off) then boots normally about a minute later.
I've tried around 40 times and can't get it to go into recovery mode. I have no idea what I'm doing but I put it in download mode and tried using Odin to flash it with files I got off sammobile. It didn't even connect at first but did after I installed Kies. Odin said it passed, the phone restarted, then just booted back up to the same lock screen. I then tried installing TWRP onto it, which failed saying it couldn't open the serial(com) port? That's where I am now... does anyone know if there's any way to wipe the phone?
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
jwoegerbauer said:
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
Click to expand...
Click to collapse
I can't get adb to detect the phone, but I flashed it successfully with Odin using the files from this thread:
https://forum.xda-developers.com/sprint-s7-edge/how-to/sm-g935p-stock-odin-firmware-t3582821
It now seems to be stuck in a loop of recovery booting into the download mode screen, and occasionally into a caution screen that says no command.. should I try another rom?
@eggy1
Use SamFirm Tool what allows you to manually search and download the Stock ROM matching your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}