Related
hi everyone im new to posting but i am really serious about getting my phone fixed.yesterday night i tried to update my vibrant through samsung kies and it bricked my phone.Ive tried the methods to unbrick it.It acutally does thought and starts my phone up normally just as if it were new.It is running perfectly until i turned it off.Once i do that it wont turn back on unless i unbrick it again and as u all know this process takes time and gets annoying.Also my computer doesnt ready my phone so the usb doesnt show.i cannot bring up my mass storage.I was wondering if any of you skilled and helpful people can pls help me out with my problem i dont understand why it works after i unbrick the phone but once i turn it off i have to unbrick it again to get it on..
bluerison said:
hi everyone im new to posting but i am really serious about getting my phone fixed.yesterday night i tried to update my vibrant through samsung kies and it bricked my phone.Ive tried the methods to unbrick it.It acutally does thought and starts my phone up normally just as if it were new.It is running perfectly until i turned it off.Once i do that it wont turn back on unless i unbrick it again and as u all know this process takes time and gets annoying.Also my computer doesnt ready my phone so the usb doesnt show.i cannot bring up my mass storage.I was wondering if any of you skilled and helpful people can pls help me out with my problem i dont understand why it works after i unbrick the phone but once i turn it off i have to unbrick it again to get it on..
Click to expand...
Click to collapse
How are you un bricking it? try the toolbox
http://forum.xda-developers.com/showthread.php?t=954509
okay im really happy about how quickly i got some help here its nice thankyou and before i try this method you introduced to me can u explain why everytime i unbricked it that it wouldnt get on unless i unbricked it again? what can be the cause of this?
bluerison said:
okay im really happy about how quickly i got some help here its nice thankyou and before i try this method you introduced to me can u explain why everytime i unbricked it that it wouldnt get on unless i unbricked it again? what can be the cause of this?
Click to expand...
Click to collapse
Its hard to say what the possible cause could be, it could range anywhere to bad file downloads for what you were using to unbrick ( I assume you were using odin) all the way to hardware failure. I personally have never had that problem but if for whatever reason you aren't able to get your phone working again complain to samsung as it was their software that messed up your phone.
Sent from my AXURA powered voodoo infused Vibrant
thats true ive already tried complaining to tmobile but samsung would say the same thing because i bought the phone off of ebay so i dont have any warranties i really hope that this method u showed me can help
This method will get you back to stock. IF you want to update through minikies, then you will probably have to update to Ji6 first after doing this But this will resolve your problems
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
doing this method will get everything back to normal and the phone will work just like it did right out of the box
also i would like to add that i have been trying odin i havent got any sleep at all trying to fix this phone ODIN SUX and im a bit upset that ive tried this over and over and it does work..
it wants me to get into usb debugging mode how do i do that if i cant get the phone to cut on?/
sigh now i got red text and the phone wont go into download mode again can anyone please help mee??/
Also, you will need to pull the sim and the sd card 1st before Odin back as long as Odin recognizes the phone you are ok, if Odin gives you problems you may want to try heimdall it works the same but sometimes just using a different program helps.
mr okal can u pls send me links to your method pls idk where to get the files
can u pls link me to the files that u wanted me to get
bluerison said:
can u pls link me to the files that u wanted me to get
Click to expand...
Click to collapse
Odin
these are mirros that i put up of the most recent version of odin along with 512 pit and jfd tar files. hope this helps
gee i cant see the links
how do i get the eugenese froyo that do not brick
bluerison said:
gee i cant see the links
Click to expand...
Click to collapse
All the links are there these are thinga you want on your pc not phone, for eugene's froyo you will have to do some searching try looking at he bible thread in the development section.
Sent from my AXURA powered voodoo infused Vibrant
bluerison said:
sigh now i got red text and the phone wont go into download mode again can anyone please help mee??/
Click to expand...
Click to collapse
hold vol up and power only from a powered off state. this should bring you to a screen with red-orange writting. from there hold down vol up\down and power and that should bring you to dl mode. from there you need to use eugenes froyo that doesnt brick.
ive tried that already idk if i have the right eugenes froyo file but i got the phone to turn on and it does exactly what i told u guys it boots up and everything is ok except usb mode and my computer doesnt recognize it at all then once i turn the phone off it doesnt come back on unless i try the unbricking method all over again
it also whipes everything i had saved away.. Can someoen pls assist me with this?
i called samsung they offered to fix it because i have a warranty but there has to be a way to fix this at home i need my phone now to be honest. samsung will take forever to fix this and ship back..
bluerison said:
ive tried that already idk if i have the right eugenes froyo file but i got the phone to turn on and it does exactly what i told u guys it boots up and everything is ok except usb mode and my computer doesnt recognize it at all then once i turn the phone off it doesnt come back on unless i try the unbricking method all over again
it also whipes everything i had saved away.. Can someoen pls assist me with this?
i called samsung they offered to fix it because i have a warranty but there has to be a way to fix this at home i need my phone now to be honest. samsung will take forever to fix this and ship back..
Click to expand...
Click to collapse
***head desk*** you need to odin to stock jfd not unbrickable froyo. You ccan flash eugenes stuff after you go back to stock 2.1 . Use the links I provided earlier for odin then use the steps others have listed to get into DOWNLOAD mode. Then flash with odin
Sent from my AXURA powered voodoo infused Vibrant
dude i understand what ur saying and u might be getting frustrated by my post but ur not understanding what im saying i have DONE everything that i was told .. the phone boots up just like if it was brand new but once i turn it off it wont turn back on unless i reflash it to stock all over again so what is the problem here do you understand my problem better now?
i have a problem with my galaxy s2 exactly like this: got a wierd problem. My galaxy S2 refuses to shut down.
When I shut the phone down without a USB cable connected then the phone turns black and the 'menu and 'return' button lights up then the phone vibrates. at this stage before the buttons turns black and the phone was totally shut down. now instead the buttons are still lit after the vibration and then the phone starts up again.
With a USB plugged in after the vibration when shutting down I get to the screen where the battery indicating charging is shown, but as soon i remove the USB cable the phone starts.
The power button is not stuck.
It's not rooted: cleared the cache in 3e recovery. No change.
I fully charged my battery. No change
I drained my battery to 0%. No change
I tried another battery. No change.
Well i thing i should Re-flash a Bootloder or install another one, is there any idea how to do that throw ODIN1.85 Please please please help me im just
First step back up data factory reset phone .
Do not start messing with bootloaders flash a full stock firmware if you have to .
jje
Bootloader via Odin available in intratechs thread. In post where ki3 is. Maybe 3rd post???
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using XDA App
WELL....
Can you people be more clearly on Ur Tips Please, Do i have to Update Bootloader or Bootloader will Automatically update after i flash a Full firmware via Odin or during update a frimware do i need to click a tick there writting "UPDATE BOOTLOADER" or not or let me know any Solution pleaseeeeeeeeeee . English is my 3rd Langue so Please try to explane with a Simply English Brothers and sister. I feel sucks No one can fix my Problem here in Kosovo.
If you are going to flash New firmware via Odin from intratech you will automatically get the right (older) bootloader that lets you clear the flash counter with the jig.
If you have already flashed KI3 or KI8 from somewhere else chances are you will have the new bootloader flashed on your phone.
If that is the case intratech has the older bootloader that you can download and flash via Odin without having to flash the full firmware again.
Read the 1st few posts in his thread carefully for the exact steps to follow.
Good luck.
Sent from my GT-I9100 using XDA App
@ aceofclubs and Others
Well i try Many of Roms to flash i try with older and newer Problem still there, i think i need to Change a Usb Port (Electronic Usb maybe i demage with a bad Charger or Who know). Is there any Idea where i can Buy&Purchase Galaxy s2 Electronic Parts
I has this same problem after flashing ki4. Would not shut off. Kept booting up every time I tried to switch off. After a bit of searching I found a fix got my phone. Just remove the battery for 30 seconds. Reinstall and try again. Might not work for you but won't cost anything to try.
Edit
Just read. You already tried another battery do this won't help you. Sorry.
Sent from my GT-I9100 using Tapatalk
YEAHH
dear Friend thanks for trying to help me, but i can not find a human being that can tell me how exactly to fix my problem i have this problem 1 month, for me it will be enough to know if is a Software or hardware problem. Problem is here in Kosovo we dont have a Samsung Store that can fix, only a solution is to send in Germany(1.441 Km ) , it will coast to me just a new Galaxy s2... i have exacly this problem like this guy in youtube here is a link : http://www.youtube.com/watch?v=eBB_3qtgj68
or check this thread: http://forum.xda-developers.com/showthread.php?t=1237228
Ok so my problem is that i eooted my wife galaxy ice without any problem, i downloaded rom manager and download nice custom rom, so at this time i lieft phone at home and go to work. At this time i didnt know that rom manager is not suporting ace device. MY WIFE KNOW a bit about rooting because she saw me rooting all of my androud device,so while a went to work she want to suprise me and she want to instal custom rom on her own so she went to rom manager and when rom manager ask her to confirm device name ahe couldnt find ace on the list, so for some stupid reazon she choose huwei phone and she flashed cwm. After that she go to instal rom from sd and she choose cynanogen ics rom,phone go to reboot but it never turn on again, i try go to download mode but it wont go to it, i remooved battery press three magic buttons and at the same time inserting battery qbut noting pc is not recognizing device. The only way for pc to recognize my phone is when i press volume up+home+power(like recovery mode) when i do this my pc is recognizing my wife ace and odin can see it also,but when i try to flash stock rom odin stock on "setupconnection" i closed all kies backgrounds but still same. I also try jig to boot in to download mode but it wont work.
Sent from my GT-N7000 using xda premium
Sent from my GT-N7000 using xda premium
Try if you can go to download mode again or recovery mode..
if not..
simply give it to the service center and tell them it simply stopped working when i woke up one fine morning...
most of the time bricking with rom manager is unrecoverable by users, only service center can repair it. i think i saw a guy claimed he recovered his bricked-by-rom-manager ace in a thread before but couldn't remember which thread it is.
try to search for the thread.
an0nym0us_ said:
most of the time bricking with rom manager is unrecoverable by users, only service center can repair it. i think i saw a guy claimed he recovered his bricked-by-rom-manager ace in a thread before but couldn't remember which thread it is.
try to search for the thread.
Click to expand...
Click to collapse
I think the service center is the only option left...
btw..your thank counter is at 666...feeling devilish much?
Probably have to change the whole motherboard, it's probably better to get a new phone at this stage. Another way (don't get your hopes up) is to use JTAG, that will probably work but if you dont know anyone with the equipment the pricing will actually be more expensive than the Ace itself.
Additionally, it would be wiser to state your actual problem on the thread title.
szymi22 said:
Ok so my problem is that i eooted my wife galaxy ice without any problem, i downloaded rom manager and download nice custom rom, so at this time i lieft phone at home and go to work. At this time i didnt know that rom manager is not suporting ace device. MY WIFE KNOW a bit about rooting because she saw me rooting all of my androud device,so while a went to work she want to suprise me and she want to instal custom rom on her own so she went to rom manager and when rom manager ask her to confirm device name ahe couldnt find ace on the list, so for some stupid reazon she choose huwei phone and she flashed cwm. After that she go to instal rom from sd and she choose cynanogen ics rom,phone go to reboot but it never turn on again, i try go to download mode but it wont go to it, i remooved battery press three magic buttons and at the same time inserting battery qbut noting pc is not recognizing device. The only way for pc to recognize my phone is when i press volume up+home+power(like recovery mode) when i do this my pc is recognizing my wife ace and odin can see it also,but when i try to flash stock rom odin stock on "setupconnection" i closed all kies backgrounds but still same. I also try jig to boot in to download mode but it wont work.
Sent from my GT-N7000 using xda premium
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i bricked my phone while going from 2.3.4 to 2.3.5
If your phone doesn’t boot into download mode and you have a black screen after flashing heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
step 7- if force close issue come-- boot into recovery mode by pressing middle button+power and then releasing power button (keeping middle button still pressed) wipe data wipe cache ..
reboot
If all goes well it should come back to life.
at last service centre is the only choice.. tell them u installed antivirus from market one night and other day u find it un-bootable
King ACE said:
btw..your thank counter is at 666...feeling devilish much?
Click to expand...
Click to collapse
not anymore :/
Aj.GaLaxY aCE said:
at last service centre is the only choice.. tell them u installed antivirus from market one night and other day u find it un-bootable
Click to expand...
Click to collapse
Lol wat, i never heard of that one before. The most common one (which actually worked for my friend) is about updating using KIES, my friend got a new phone without any trouble at all.
QNBT said:
Lol wat, i never heard of that one before. The most common one (which actually worked for my friend) is about updating using KIES, my friend got a new phone without any trouble at all.
Click to expand...
Click to collapse
choice depends on you.... its that are u a good actor and can u convince
If I'm not wrong you can bring it back using a jtag box, 25 pounds could get yourself that.
But just repair it it's easier.
I think You go to service center tell them that your phone got switched off when You were talking on the phone and then it never started again and always act like Noobs in front of them.....
I hope you have warranty for your ace
Sent from my GT-S5830 using Tapatalk 2
I got the solution : For bricked ice........ Take an
Icepick.... .. Sorry, but this pass was too good....
I have come across such a situation and successfully have brought back my ace to life. (Disclaimer: I am not saying these are the steps to recover any bricked device, but this is a method i followed once when i bricked my device by following a wrong flashing method)
Just remove the battery and try to switch on normally without pressing any combination. It would not do anything but would drain remains completely.
Then do not put the battery back for a while (in my case i kept it for 5 mins)
Then again follow the same procedure without battery, just press the power button for 10 secs without pressing any other keys and see what happens. It should remain blank.
After that, try to connect the USB cable and then press power + v down + center key and see if it goes to download mode. If not, then put in the battery without removing the cable, then see if it automatically switches on to emergency recovery mode (It should).
Next when u see the emergency recovery screen, now try going to download mode by using the combination (power + vdown + center)
Please let me know if this works. ( I hope this should work)
service center
buy "USB Jig" so the phone will start in download mode and you can easily flash it with odin.
http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=usb+jig&_sacat=0
Here's the solution:
Step 1: Buy a baseball bat
Step 2: Get home
Step 3: Beat up yo wench with the bat and scream "You dumb *****! Make me a sandwich".
Sent from my GT-S5830 using Tapatalk 2
I've done same what your wife do before.. so i tried every thing but still cant unbrick..
Just send to servis centre if you still have warranty..
I tell them i was on fb but it( ace) goes off..
If u doesnt have warranty anymore just go to phone shop tell them to change your ace board..
Just click thanks if i help u..
I just want to help.. :banghead:
Sent from my GT-S5830 using xda premium
Namashkaar Everybody,
I had a rooted S2 GT-I9100G with Stock 4.0.3, I9100GXXLPQ, I9100GODDLP7 on it.
Today I tried to upgrade it to Stock 4.0.4, I9100GXXLPZ, I9100GODDLP9 through Mobile Odin Pro.
I did what I normally do with options ticked and wipe data & cache and wipe Dalvik cache.
After phone rebooted , its stuck on First screen of "Samsung Galaxy S2 GT-I9100G" screen.
Its not going into download mode neither its restarting nor I could find a solution anywhere else.
Its my father's phone and is out of warranty.
What should I do?
I start this thread in hope that you all might be able to help me.
Thanking you in anticipation
Chandan Indoria
ibm_chandan said:
Namashkaar Everybody,
I had a rooted S2 GT-I9100G with Stock 4.0.3, I9100GXXLPQ, I9100GODDLP7 on it.
Today I tried to upgrade it to Stock 4.0.4, I9100GXXLPZ, I9100GODDLP9 through Mobile Odin Pro.
I did what I normally do with options ticked and wipe data & cache and wipe Dalvik cache.
After phone rebooted , its stuck on First screen of "Samsung Galaxy S2 GT-I9100G" screen.
Its not going into download mode neither its restarting nor I could find a solution anywhere else.
Its my father's phone and is out of warranty.
What should I do?
I start this thread in hope that you all might be able to help me.
Thanking you in anticipation
Chandan Indoria
Click to expand...
Click to collapse
flash via odin [PC] and all will be solved
AND PLEASE DONT MAKE THREAD FOR SUCH TYPE OF QUESTIONS
ICS_XD said:
flash via odin [PC] and all will be solved
AND PLEASE DONT MAKE THREAD FOR SUCH TYPE OF QUESTIONS
Click to expand...
Click to collapse
Thanks for replying, If I could I would have, since i couldnt that is the reason I posted on XDA to find out the alternate solution.
To flash through PC Odin I have to be in download mode, as mentioned clearly , I am unable to get into download mode.
So, now if you know how to flash through PC Odin without getting into DOwnload Mode, please do let me know .
Thanks again.
ibm_chandan said:
Thanks for replying, If I could I would have, since i couldnt that is the reason I posted on XDA to find out the alternate solution.
To flash through PC Odin I have to be in download mode, as mentioned clearly , I am unable to get into download mode.
So, now if you know how to flash through PC Odin without getting into DOwnload Mode, please do let me know .
Thanks again.
Click to expand...
Click to collapse
For now ... Try to take out the Battery
And see if you could get into Recovery .
If you could get into Recovery .. WipeData and Cache manually and try to reboot again ..
See if this helped .
ibm_chandan said:
Thanks for replying, If I could I would have, since i couldnt that is the reason I posted on XDA to find out the alternate solution.
To flash through PC Odin I have to be in download mode, as mentioned clearly , I am unable to get into download mode.
So, now if you know how to flash through PC Odin without getting into DOwnload Mode, please do let me know .
Thanks again.
Click to expand...
Click to collapse
use a usb jig ?
Reported...3 such threads already...
Ok...are you sure about can't go into download mode? Press volume down, home and power button simultaneously... do not let go...keep on pressing until the phone lights up...if not, try volume up, home and power...you should get into recovery mode...if you are able to, just factory reset and try again...
Infinite96 said:
For now ... Try to take out the Battery
And see if you could get into Recovery .
If you could get into Recovery .. WipeData and Cache manually and try to reboot again ..
See if this helped .
Click to expand...
Click to collapse
Thanks for reply.
took out battery, sd card & sim card for being cautious.
Left phone switched off for 15 mins.
Turned it on after 15 mins 1.) Vol up+home+power 2.) Vol Down+home+power ...... nothing neither getting into recovery mode nor getting into download mode.
And no I dont have jig. Thans for suggestion though.
Ryuinferno said:
Reported...3 such threads already...
Ok...are you sure about can't go into download mode? Press volume down, home and power button simultaneously... do not let go...keep on pressing until the phone lights up...if not, try volume up, home and power...you should get into recovery mode...if you are able to, just factory reset and try again...
Click to expand...
Click to collapse
If I am not supposed to start a thread, then what should I do ? The reason I started the thread 'cause the FIrmware and version of operating both were new and were not be found by me in the forum.
Please guide me so I know and can educate others too.
thanks.
ibm_chandan said:
If I am not supposed to start a thread, then what should I do ? The reason I started the thread 'cause the FIrmware and version of operating both were new and were not be found by me in the forum.
Please guide me so I know and can educate others too.
thanks.
Click to expand...
Click to collapse
Duh...in the Q&A section...I have already gave you some advice... tried it?
Ok...seems that you got a hard brick...the only way is to get a usb jig or a jtag unit...but try a jig first...it is easy...I even made one myself...
ibm_chandan said:
Namashkaar Everybody,
I had a rooted S2 GT-I9100G with Stock 4.0.3, I9100GXXLPQ, I9100GODDLP7 on it.
Today I tried to upgrade it to Stock 4.0.4, I9100GXXLPZ, I9100GODDLP9 through Mobile Odin Pro.
I did what I normally do with options ticked and wipe data & cache and wipe Dalvik cache.
After phone rebooted , its stuck on First screen of "Samsung Galaxy S2 GT-I9100G" screen.
Its not going into download mode neither its restarting nor I could find a solution anywhere else.
Its my father's phone and is out of warranty.
What should I do?
I start this thread in hope that you all might be able to help me.
Thanking you in anticipation
Chandan Indoria
Click to expand...
Click to collapse
Connect ur charger with phone if it shaw you charging then ok...try above given methods...
Bt if It won't charge it means you breaks your phone...
And it is hard break so only samsung care helps you if ur phone is in warrenty otherwise it is so costly...
Sorry for bad english...
Sent from my GT-I5510 using xda premium
Search thread name: borrow usb jig
Near you. Then search for your country and if you see city and try to pm members those where near you. Sorry bad English.
Send form Galaxy S2. Using XDA Premium
ibm_chandan said:
If I am not supposed to start a thread, then what should I do ? The reason I started the thread 'cause the FIrmware and version of operating both were new and were not be found by me in the forum.
Please guide me so I know and can educate others too.
thanks.
Click to expand...
Click to collapse
What you are meant to do is post any question about the "g" variant in the "g" variants forum........ie not here.
Sent from my GT-I9100 using xda premium
Phone sent to Samsung
Thanks all for your help, time and suggestions.
The phone was not charging and eventually died cause of low/no battery.
I took that phone to a Samsung care centre and they are going to fix it , lucky to have a friend working their.
But I really appreciate your help and suggestions.
regards to all.
got same problem..me cannot cannot to odin..dunno why..help me asap:crying::crying:
Hello buddies,
I think I have a big problem. Flashing failed on my Galaxy S2 I9100. As a result I cannot turn on the phone, I cannot get to Download mode, neither recovery mode, I cannot connect via USB, it doesn't recognize any devise, I reinstalled USB drivers, I tried on different PCs, I only get the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." ONLY when I plug in the charger. When plug it off, it's gone and nothing else appears on screen whatever I try. I just don't know what to do now... I do not have an access with PC. Can somebody help me please, I'm very discouraged now. Every post will be appreciated!
That message on the screen with the phone---!---pc pic is download mode - forced download mode.
The only way you're fixing it is if you get it to successfully take an Odin flash. Find Hopper8's 'Odin won't flash thread' & try the stuff in that thread till it works. Most people in this situation are looking for an easy fix & there isn't one. It may not work the first time you try, but it might on the 10th try. Persevere.
Edit - Oh, and your phone is staying busted until you do get access to a PC.
MistahBungle said:
That message on the screen with the phone---!---pc pic is download mode - forced download mode.
The only way you're fixing it is if you get it to successfully take an Odin flash. Find Hopper8's 'Odin won't flash thread' & try the stuff in that thread till it works. Most people in this situation are looking for an easy fix & there isn't one. It may not work the first time you try, but it might on the 10th try. Persevere.
Edit - Oh, and your phone is staying busted until you do get access to a PC.
Click to expand...
Click to collapse
Thank you veeeery much for this help!!!
There were 2 problems. First my battery was completely drawn and it wasn't charging it at all when plugged in the charger because all the energy was in use for that super power consuming emergency mode (the device was getting hotter than never before). Then I took the battery and charged it fully on another Galaxy S2 (hopefully I could find one). Then I was able to enter the normal download mode. Then I prepared an original ROM and I tried to install it through Odin. The second problem was my maybe faulty cable which didn't let the installation to continue from the initialization. Then I used another unbranded cable from $1.99 and it just RAN! I installed the latest official ROM and the phone works as it should. A happy end I think. There is one more thing however.. Before the new installation the camera had a little pink spot in the middle only when shooting inside. Many say that all S2 have this problem and that this is a software issue of the white balance. I tried to play with the white balance settings and when turn off the auto-balance and for example choose daylight the pink spot is not present anymore... With the new ROM the problem is still here. I was wondering whether if I change the camera itself with a new this will solve the problem...?? But who knows if it's really a soft problem...
Thanks again for the tips it helped me a lot as I'm new to this.
Regards,
Nick.
guys emergency
i have the same problem too................my phone is rooted and i flashed a custom rom..............yesterday when i made an update the didnt let me go t recovery mode any more..............when i made a reboot it totally bootlaoder ...........and i forgot to usb debug before................i tried t flash a new rom with odin but when i opened odin and on pda sellect tar and press the start my phone falled down by mistake and left the cable...............now thye only thing i can do is t go t download mode..........also odin doesnt recognise my phone...............when i try t open my phone it saysfirmware upgrade encounteran issue.please select recovery mode in kies & try again..................................is there any way t fix it please tell me...................tnx in advance