Hi, so I was trying to follow this guide (I know that it's for I9305, but the procedure should work for I9300), but when I connect my phone to my PC, I get the message "USB device not recognized".
The devices manager lists the phone as "Unknown Device", the device status is "Windows has stopped this device because it has reported problems. (Code 43)" and the hardware Id is "USB\CONFIG_DESCRIPTOR_FAILURE".
I only have this problem when I put the phone in diagnostic mode ("RNDIS + DM + MODEM", "RMNET + DM + MODEM" or "DM + MODEM +ADB"). It works fine if I use the other modes.
I tried with various Samsung USB Driver versions (1.4.6, 1.5.09, 1.5.18 and 1.5.25) and roms (stock, omega and cyanogenmod, currently with stock 4.1.2), all with the same result. I'm using Windows 8 x64.
So, I wan't to use QPST but I can't, so any help would be greatly appreciated. If you need any more info just ask please.
Whatever you are trying to do that is for qualcom cpu
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts
JJEgan said:
Whatever you are trying to do that is for qualcom cpu
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts
Click to expand...
Click to collapse
Thanks so much, I didn't realize that my processor wasn't a Qualcomm.
Please, how did you solve this problem? I'm trying for hours and still is unknown device in diag mode! Help!
Unknown device (i9300 with 4.3 original rooted)
I'm in the same situation after I select: rmnet+dm+modem
Install and reinstall several version of usb driver, cable, port etc.. but when I select rmnet+dm+modem or option under my pc doesnt't install driver for it because it sees an unknown device
WHY?!?!?
Why are there no REAL helpful answers to these questions? Everyone is just saying "read this, or see that post..." but no real specific answers for fixes!!! I have been all over Google looking for a solution for this problem! I can get to the USBSettings menu on my 9300 by dialing *#0808#, but when I select RMNET+DM+MODEM, my computer no longer recognizes the device! Installing Samsung drivers did not help...my question is, does anyone know what drivers I need for Windows to recognize the phone?
Thanks!
~Jim
You are looking for an instant easy answer to a varied and complex problem, made worse by people who don't read or understand before they break things.
This long dead thread you resurrected is a case in point, just read the first two posts to understand how a situation is made worse by impatience.
Please Really Help
Same exact problem I am having I just dont seem to get what to do now.
I have a NOTE 2
jmaher1023 said:
Why are there no REAL helpful answers to these questions? Everyone is just saying "read this, or see that post..." but no real specific answers for fixes!!! I have been all over Google looking for a solution for this problem! I can get to the USBSettings menu on my 9300 by dialing *#0808#, but when I select RMNET+DM+MODEM, my computer no longer recognizes the device! Installing Samsung drivers did not help...my question is, does anyone know what drivers I need for Windows to recognize the phone?
Thanks!
~Jim
Click to expand...
Click to collapse
Hey Jmaher, did you ever get to solve this? Seems getting these RMNET+DM+MODEM Diagnostic usb settings recognized on PC COM Port is one hell of a job! Trying to get Note 3to work with QPST. Kindly respond bro...
I never did! I pretty much gave up. It was a customer's phone I was working on, so I just gave it back and told him we couldn't fix the issue.
Sent from my SM-N9005 using Tapatalk
thought id through my thoughts and troubles into the bag ...
ive got a troublesome phone, is a I9300 (so the international version) had the s5 sensation rom on it..
went odd, wouldnt run/install any apps etc (errors out with -54 i think it was) then week or so passed (as not got round to fixing it as it stillworked as a phone)
and after it went through a stage of switched it self off...
the batt went flat, and then hung on samsung logo...
after trying to sort it out, reflashing a backup, and then back to original ODIN files etc .. still hung, but would go to download and recovery with many compliants ..
after goose chasing them, got it down to just complaining about the /EFS
so after trying to fix this one, an nowt worked, i formatted /efs ... and yeah ! all boots !
so ive now got a "blank" efs, but a booting phone ! (but no network)
ok so in pretty much 100% of all tutorials in fixing a imei/efs problem it stems on putting phone into "diag or diagnostic" mode
which EFS Pro will do for you, or you can *#0808#
BUT i to get the "unkown" device too ..
and like the posters here all other options of modes work/install, but the programs for imei repair etc need diag mode
and from what ive read (the posts linked on the first couple posts here, and whats actually in those links)
suggest that either to "take it for repair" or talks about imei repair progs in diag mode with CDMA qualcomm devices, and CDMA devices are US devices
so i am lead to believe that as the I9300 being international version, doesnt actually have a "DIAG" mode, only CDMA US versions ? ! ? is THIS what your all hinting at but not saying ???
so thus no drivers work for it, and thus "unkown device"
and the only way is for a appropriate "box" that im thinking emulates, or works like diag mode !?
is there a way to force/flash diag mode for international s3's ?
am i even correct in these assumptions ??!!
---------- Post added at 06:31 PM ---------- Previous post was at 06:11 PM ----------
OmniSliver said:
Thanks so much, I didn't realize that my processor wasn't a Qualcomm.
Click to expand...
Click to collapse
thers NOTHING about qualcomm, and what it is and what isnt in phones in any of the quoted links
or anything related to CDMA
but am i presuming right what i said above, that the international version doesnt "have" a " diag" mode due to the type of processor used ?
miniminus said:
am i presuming right what i said above, that the international version (non qualcomm) doesny "have" a " diag" mode due to the type of processor used ?
Click to expand...
Click to collapse
I couldn't find any diag mode that worked. I had to send my phone to a repair shop that charged me around 20 USD.
Also, QPST (Qualcomm Product Support Tool) works only for phones with a Qualcomm processor.
not qualcomm
Im stuck at RMNET+DM+MODEM "Device not recognized", seems i need the driver for it. what can be done if the device is not a qualcomm CPU?
Model : GT-I9300T
jmaher1023 said:
Why are there no REAL helpful answers to these questions? Everyone is just saying "read this, or see that post..." but no real specific answers for fixes!!! I have been all over Google looking for a solution for this problem! I can get to the USBSettings menu on my 9300 by dialing *#0808#, but when I select RMNET+DM+MODEM, my computer no longer recognizes the device! Installing Samsung drivers did not help...my question is, does anyone know what drivers I need for Windows to recognize the phone?
Thanks!
~Jim
Click to expand...
Click to collapse
enable cp logging in recovery ....
volkan.akbulut said:
enable cp logging in recovery ....
Click to expand...
Click to collapse
you are the man. thanks, that worked like a charm.
sharky481232 said:
you are the man. thanks, that worked like a charm.[/QUOTE
please how did you enable cp logging in recovery
I currently use philz recovery
Click to expand...
Click to collapse
elprinz said:
sharky481232 said:
you are the man. thanks, that worked like a charm.[/QUOTE
please how did you enable cp logging in recovery
I currently use philz recovery
Click to expand...
Click to collapse
stock recovery had that option
Click to expand...
Click to collapse
95
sharky481232 said:
elprinz said:
stock recovery had that option
Click to expand...
Click to collapse
So what would be the solution for the custom roms? I have been looking all over the web, but noting so far.
I have gt-i9505 with Imperium LL Rom v13.0.
Click to expand...
Click to collapse
volkan.akbulut gave the solution. Follow these steps:
1. Turn off the phone
2. Enter Recovery Mode by holding Vol Up + Home + Power
Release the buttons when you see "Recovery booting" on the left-top corner.3. Use Vol Down button to select Enable cp logging and press Power
Now try to connect. Drivers will be installed.
Good luck.
volkan.akbulut said:
enable cp logging in recovery ....
Click to expand...
Click to collapse
THANK YOU... holy $%^&* i wish this was referenced in the OP on the front page (missed it on page 2 days ago).
S4 i9505 on win7 64, samsung driver 1.5.59.0 for use with QXDM
Related
Hello everyone,
I recently bought a "second hand" GT 10.1v, for which the previous owner tried to root it and install a custom firmware. He told me he had a problem during the processus and now the Tab is runs in an infinite bootloop.
I though I would be able to fix it (I have a GSII which I customed a lot so...), but I guess I was wrong... I've been looking for some answers for the last 2 days but can't do nothing. Here's the problem :
* I tried to do the method to root the device one more time. I make the button procedure to arrive to the screen with the usb plug and the android working in a triangle.
*When I choose the usb plug, I have these informations written :
fastboot usb download protocol
bootloader version : p7100BUKC8
baseband version : P7100BUKDF
serial number : the serial is written
lock state : unlocked
*When I choose the triangle, I have these :
reason : force key
secure mode : secure
check signature : check
oem lock : unlock
waiting usb cable...
Regardless of my choice, I can't have any communication with my computers (running under windows 7 x64 or windows vista x86)
*I tried with Odin (after choosing the triangle), the device is not recognized in odin.
*I tried with fastboot mode, following step by step different tutorials (this one was the first) with installing usb drivers via google sdk, modifying the android_winusb, moving adb to "tool" folder, adding the fastboot nvidia to this folder.
When I type fastboot devices in cmd, nothing is written. When I try fastboot oem unlock, it shows "waiting for device".
When I type adb devices, I have a blank list of devices.
The problem is that when I plug the usb cable to the computer, windows doesn't try to install drivers and I don't see Android phone nor ADB device or something like that in the device manager of win7???
I'm totally desperated, could someone help me to fix my problem??
Sorry for the length of the post but I prefer write as many informations as I can so you don't waste time by trying to help me on something already done.
Many thanks to you all!!
Using windows7 I'd reinstall the usb drivers as a first step. If it says the drivers are already installed, install them anyways, and see if that gets you any further. Hopefully it will.
Plus hopefully someone with more experience with 10.1v will come help also.
If you see this it was sent using my GT-P7510.
Hi Benzoman,
Thank you for your prompt reply, but as I said, the problem is that windows doesn't even detect it. How can I install the driver if I have no device in the windows device manager?
download the driver from Samsung or wherever you want and run the download. I'll post a link in a minute.
If you see this it was sent using my GT-P7510.
EDIT: Just noticed your posting for the 10.1v No experience with this version myself personally but try the following links.
Post for unlocking which includes USB Drivers http://forum.xda-developers.com/showthread.php?t=1064793
Thread referred to in first post for Windows Users http://forum.xda-developers.com/showthread.php?t=1083517
Like I said I haven't messed with the 10.1v myself so I would follow the original thread instruction first and see what they do for you. Else ask for help with the problem somewhere appropriate for the 10.1v there unless you already did.
Thank you for your help, but I still don't understand, and this is for every type of device, how can I install driver if the device is undetected by windows?? In the device manager, I don't see any unknown device or something equivalent...
You have the same issue as i do, The COM ports won't be able to be read until the device itself has loaded/opened it's COM ports to be able to communicate. Your best bet would be attempting to get it to detect via APX mode. Once that works, your only solution to getting it to boot/flash firmware normally? would be to drain the thing dry
PS- I posted a guide on here on how to get it out of the "Endless boot" or Sleep of death. I won't say your case is unique, but no reason not to give it a go, right?
I had a similar issue with my 10.1v and the 10.1 3G , I ended up bricking my 3G and getting the 10.1v at a second hand price due to the very same reason. After draining them completely I had flashed both of them successfully and now like cancer free patients, they're both alive and kicking.
Edit: I forgot to add, this is normal, the device won't even pop up on Device Manager or the "Installing drivers" list until and unless you drop it to APX mode. If you did it right, You'll hear the USB sound.
Thank you for your post Misledz, it seems that someone has a new method which might work (I hoooooope so lol).
But could you explain me what you mean by APX mode and how to get into it? I don't really understand.
Plus I don't understand what you mean about drying the thing dry. Could you explain me that too?
Many many thanks ;-)
Edit : Ok, I finally found your tutorial and will test it, hoping this will work ;-) I keep informed.
juxci said:
Thank you for your post Misledz, it seems that someone has a new method which might work (I hoooooope so lol).
But could you explain me what you mean by APX mode and how to get into it? I don't really understand.
Plus I don't understand what you mean about drying the thing dry. Could you explain me that too?
Many many thanks ;-)
Edit : Ok, I finally found your tutorial and will test it, hoping this will work ;-) I keep informed.
Click to expand...
Click to collapse
Well glad you found your way to it :] The guide talks about how to drain it dry and get it to work :] In hopes it works!
??? I don't understand why but now I'm unable to turn on the Tab unless I plug the usb in??? (maybe she's feeling i'm about to fix it?lol)
It will be hard to drain it if I can't turn on and off without plugin' it. Any idea??
Edit : important thing : when I plug the usb, I have the battery charged to 100% and the Tab vibrates, so no, it's not because the battery is empty lol
Edit II : I'm not sure I fully understood the tutorial. My though is the following:
1, I drain the tab by holding the power button down.
2, I hold the power and vol+ buttons, plug the USB and maintain both buttons for 15s (could it be more?).
After that normally I should have a loop of pop up in the device manager for APX device, I release the vol+ button but keep power button hold and wait the end of the loop to install the nvflash driver?
Correct? 'cause if it is, it don't work for me :-S I can't have the pop up loop (I remember I had this loop once, but I released the power button and the loop cut and the "unknown device" disappeared from device manager. But since, I can't get this again)
juxci said:
??? I don't understand why but now I'm unable to turn on the Tab unless I plug the usb in??? (maybe she's feeling i'm about to fix it?lol)
It will be hard to drain it if I can't turn on and off without plugin' it. Any idea??
Edit : important thing : when I plug the usb, I have the battery charged to 100% and the Tab vibrates, so no, it's not because the battery is empty lol
Click to expand...
Click to collapse
I don't think your actually getting it The whole idea is to drain it or find an alternative way to get it to fastboot mode to bring it to Download Mode where you can flash an HC rom of choice to save it 140%. 100%..Wow that's not going to be easy to drain..
In fact, I don't know why, it seems it was kind of a bug because after that I unplugged and plugged the socket charger again and I had a battery icon why a exclamation mark and charging.
However, it seems you answered when I was posting "edit II" in my previous message. Did you read it?
Anyone having an idea?
Good luck with helping this one Misledz.
They don't know how to reinstall drivers in a windows machine if the device the drivers are for are not found
So this is might just be a fun endeavor. :screwy:
I think there are other issues needed resolved before this person roots or mods anything. Like understanding their Windows machine and how to install/reinstall drivers.
Always has just been running the install from the drivers file and accepting yes I want to install the drivers even though the are already installed. I could be missing something about this part as it pertains to this problem. But sure I'm not mistaken about how to install/reinstall drivers on a windows machine. Windows can't be expected to recognize every thing first, and then download and install the drivers for it. Maybe its me but that's what I'd call a fantasy world. I know thats what plug and play says it does. I also know that it often fails. So, needing to learn, I even know how to completely uninstall the possibly offending drivers before reinstalling said drivers, sorry I don't have the patience to help with this one, but when you goto the10.1v I can use that as my excuse since I don't own one.
Plus I don't want to follow you into the rabbit hole.
A sincere Best of luck to both of you. Misledz and the person with the problem. :thumbup:
If you can read this it was sent using my GT-P7510.
Benzoman said:
Good luck with helping this one Misledz.
They don't know how to reinstall drivers in a windows machine if the device the driver are for are not found
So this is might just be a fun endeavor. :screwy:
I think there are other issues needed resolved before this person roots or mods anything. Like understanding their Windows machine and how to install/reinstall drivers. Always has just been running the install from the drivers file and accepting yes I want to install the drivers even though the are already installed. I could be missing something about this part as it pertains to this problem. But sure I'm not mistaken about how to install/reinstall drivers on a windows machine. I even know how to completely uninstall the possibly offending drivers before reinstalling the drivers, sorry I don't have the patience to help with this one, but when you goto the10.1v I can use that as my excuse since I don't own one.
Best of luck to both of you. Misledz and the person with the problem. :thumbup:
If you can read this it was sent using my GT-P7510.
Click to expand...
Click to collapse
sure, Just abandon me Q.Q
But anyways the driver for the device is in the samsung website, it's device specific.
In order for the device to be recognized you need to have the appropriate driver for it.
Another would be making sure that the tablet get's read on the computer via fastboot mode/adb. You need to use the Volume Down+Power option till the logo boots up.
Then again, what do you see when you boot up the tablet? / Can you even boot it? That would be a good start and more detailed info would be appreciated
PS- I just read your Edit II, turns out to get unknown device it's Power+Volume Down, which is the left button on the volume keys. You hold it down when it's plugged via USB to the PC for 15 secs, 20 seconds doesn't matter just it needs to cross the 15sec benchmark. Once you get past it forces itself into APX mode. This is where you need the APX driver for it. Seeing as to your tablet is unlocked you may be able to save it.
I edited my post after you quoted to try to explain my potition and reasoning reasons a little better. Good luck mate!
If you can read this it was sent using my GT-P7510.
Misledz :
The problem is that I don't find (after several researches) the drivers on samsung site, but I found another one.
The tablet is not recognized in ADB nor in fastboot (as told in my first message)
When I boot the tablet, I see the samsung logo with open padlock and then the boot animation with the android bot and then I'm stuck there.
When I hold power and left volume button, the device turns on and I see a screen with the usb and the droid in the triangle (downloading mode)
I think (by reading the very interesting post of benzoman) that it might have a confusion about "the device isn't recognized by the computer". What I mean is :
When i plug it via usb, turn it on normally, or put it in downloading mode or fastboot mode, the computer doesn't even react (any sound like when i plug a usb key nor pop up saying "new device detected" in the right bottom corner of the screen)
I hope these informations added to my first post are enough for you to have a clear vision of my problem.
Benzoman :
You don't have time to give the informations you "know", but enough to waste by writing this type of s**t?!
Can you tell me how does a cyclotron works? How we modulate the power of the exiting ray of particles? When you will be, just come back to waste your time here and show that you think you're smarter than others. Everyone has his own job, I'm not into computer science so yes, I recognize I'm far to know every thing, and I think that's the purpose of this type of forum : share knowledge and help others when needed.
I think you should open a new type of forum, if your entertainment is to waste your time by laughing at other's problem.
You wrote about 10 lines to say nothing...but don't have time to give a hand? How many lines would have been necessary to give a useful information? By seeing how strong you're saying you are, surely less!
At least, if you don't want to help, don't foul the topic, it will be easier for the ones who really want to help to follow!
juxci said:
Misledz :
The problem is that I don't find (after several researches) the drivers on samsung site, but I found another one.
The tablet is not recognized in ADB nor in fastboot (as told in my first message)
When I boot the tablet, I see the samsung logo with open padlock and then the boot animation with the android bot and then I'm stuck there.
When I hold power and left volume button, the device turns on and I see a screen with the usb and the droid in the triangle (downloading mode)
I think (by reading the very interesting post of benzoman) that it might have a confusion about "the device isn't recognized by the computer". What I mean is :
When i plug it via usb, turn it on normally, or put it in downloading mode or fastboot mode, the computer doesn't even react (any sound like when i plug a usb key nor pop up saying "new device detected" in the right bottom corner of the screen)
I hope these informations added to my first post are enough for you to have a clear vision of my problem.
Benzoman :
You don't have time to give the informations you "know", but enough to waste by writing this type of s**t?!
Can you tell me how does a cyclotron works? How we modulate the power of the exiting ray of particles? When you will be, just come back to waste your time here and show that you think you're smarter than others. Everyone has his own job, I'm not into computer science so yes, I recognize I'm far to know every thing, and I think that's the purpose of this type of forum : share knowledge and help others when needed.
I think you should open a new type of forum, if your entertainment is to waste your time by laughing at other's problem.
You wrote about 10 lines to say nothing...but don't have time to give a hand? How many lines would have been necessary to give a useful information? By seeing how strong you're saying you are, surely less!
At least, if you don't want to help, don't foul the topic, it will be easier for the ones who really want to help to follow!
Click to expand...
Click to collapse
Please do not quote this post as it is being edited constantly to futher help juxci and explain any misunderstandings and quoting it before completion will only cause more issues. Thanks for understanding.
First, I was trying to be polite by stepping back and letting Misledz help you. Having both of us suggesting conflicting ideas would have of been little help.
Second, if I did't understand the very basics of say, oh idk, maybe a cyclotron why would I mess with something that relies upon on it? I still would because there are others that can help, should something go wrong. Albeit, I would not DEMAND their help and would even understand if they chose not to help if I acted an a$$.
Then b!tch because someone tries to help me, and my response comes across like I know what I'm doing, but is really only being a rude reply of, "Can't do that." When the person trying to help knows it can be done, confirming I know not even the basics of the cyclotron and should be open to any and all help. Not act an a$$ by just saying, "That can't be done." When it can be done, and easily, if the person who knows about the cyclotron would tell me. But, since I want to be an a$$ and act like I know what can and can't be done on the cyclotron. The person who could have helped with it says, if I'm not going to listen, then they'd rather not be directly rude themselves, and get aggravated, notices another who has the knowledge is present, wishes them both an HONEST WISH OF LUCK and leaves.
This is basically what I myself was trying to do. I know the drivers can be completely be removed and reinstalled on the PC, but you acted an a$$ and said, that can't be done, sounding like you knew, what you were doing, and wasn't going to be open to accepting my help, without causing me great frustration in the process. So knowing that the very knowledgeable Misledz, was here to help, I thought it best to leave it up to him. My wish of luck was sincere, even if it was indirectly sarcastic.
I should stop here and not look back at the thread, but I have always tried to help where I can.
If you really would like my help personally. Here you go, I'll start again. Although it's repeating things Misledz has already said.
You need to get legitimate Samsung drivers which are specifically for YOUR device to install. Ones found elsewhere may cause more problems than they fix.
If installing the drivers over the top of the others doesn't help you need to uninstall the old drivers fully. Then install the official drivers. This has helped others and even myself once or twice. Widows is a finicky little [email protected] sometimes.
Uninstalling the old drivers completely may be considered complicated and without having another reference handy to help me guide you to a program, I can't do it correctly. I will have to get to my PC where I have access to use references for me to look at so I can help you best. I will be back to to check on the progress of your issue. ASAP
I think some of the problem may have initially been from my personal misunderstanding of your grammar. Believing you were stating things in a way you did not mean. If that is the case, I apologize.
Edit: http://www.nirsoft.net has a program called USBDeview. It is what I use to completely uninstall all Samsung drivers. I use it to find and remove all the drivers found referencing Samsung. CAUTION...this could cause even more issues than it solves if you remove the wrong drivers or you don't have the drivers specific to your device. I cannot say any specific driver is safe to remove without being able to see and know what they are there for.
Being that you're using a 10.1v Device and I only have personal experience with the 10.1 (no v after 10.1) I may lead you in the wrong direction. One of the reasons I was not going to help, as I stated in a previous post you took as offensive.
But if you wish to continue with my personal advice just post your progress and I'll post help when I can.
I honestly think Misledz would be of more help to you and I'm only going to get in the way trying to help. We're both saying basically the same things using different words.
Whatever the case, keep us updated.
D:...I was wondering what the fuss was about...and then the mega paragraph came Let's relax on this firstly, Jux , Benzo is just trying to help I do agree I end up suggesting the less problematic solution to drain but ofcourse there are other methods to "tame" this wild beast of a tablet. I've only been on the Galaxy Tab scene for less than a week so I'm just giving information based on experience , I hope you don't take to heart what he said, as this is a Q&A thread and almost 70~80% of the threads go unanswered that people purposely post in the development area for quick attention..only to be booted here by the mods (Which I agree they are doing a good job, Kudos), atleast on the positive side, there has been interaction in this.
Moving on to the main deal.
I know you have mentioned the droid and the triangle, but it confuses me as to do you stay in that screen or do you select an option. If memory serves me right, the left, being the droid logo (You select it with the (+) key, which is the right volume key, and navigate with the (-) and select the droid logo) I know you haven't been into download mode because you didn't mention the warning that it gives before you actually get into download mode.
Warning goes somewhere along the lines of proceeding at your own risk with a huge ass triangle telling you the following. In which you need to press the plus key again to confirm. If you did this right, no matter what, lack of driver or such, the PC will recognize the newly open port. Normally Odin won't recognize the tablet despite being in the fastboot menu, but adb will.
I would however suggest trying a different USB port? or another laptop? Normally this RARELY happens but some HP based desktops come with a built in MMC reader which consumes a port of it's own and conflicts with the port Odin requests. You don't really need a high end PC to get this done, just the required files.
And just for reference could you kindly state what OS are you on, Windows __? Seeing as to how you said you aren't that tech savy I would assume it's either Vista (Which has some HORRIBLE USB port management) , If it's XP , XP tends to reserve USB port's for previously plugged devices to avoid the recache or reinstallation of drivers.
I know the vast questions may sound silly, but trust me on this, the least expected situations are what causes the most frustrations
Note: I haven't worked in any Service Center's if ever you're wondering -.- so I do apologise if I sound like one of those Dell service reps.
My sentence was :
"Thank you for your help, but I still don't understand, and this is for every type of device, how can I install driver if the device is undetected by windows?? In the device manager, I don't see any unknown device or something equivalent"
I don't see what's not clear or what let you think that I meant "that can't be done"... Whatever, you made apologizes, I make mine too for the eventual misunderstanding between you and me and yes of course, your help is still welcome if you want to.
So, back to the main problem, I used usbdeview to uninstall all samsung drivers.
After that, I followed this tutorial to enter in fastboot : http://forum.xda-developers.com/showthread.php?t=1064793
That means I :
- Downloaded and install the JAVA SDK
- Downloaded the Android SDK
- Downloaded the USB drivers
- Edited the “<PATH TO ANDROID SDK>\extras\google\usb_driver\android_winusb.inf”
And then :
1) Power off your tablet
2) Hold the VOLUME DOWN button and press the POWER button (your tablet will power on and you will see the BACKUP and USB icons)
3) Use VOLUME DOWN to select the USB icon, and then press VOLUME UP to confirm the selection.
4) You should now be in fastboot mode (the word FASTBOOT should appear somewhere in the top left corner)
5) If Windows doesn’t automatically detect the device, go to device manager and find the ‘Fastboot’ device. Right-click and select update driver, choose to manually install and browse to the “<PATH TO ANDROID SDK>\extras\google\usb_driver\” folder.
And there is the problem : any sound when I plug the tablet, windows doesn't detect automatically, so I go to the device manager to look for the "fastboot device" (or another type of device that is not from the computer) and I don't see nothing...so I can't update drivers.
So that is why I asked the question : How can i install drivers if the computer doesn't see the device?
After that, I tried all the things you can read in my first post because I wanted to be as complete as I could in my description so you can have all in your hand to give your advice.
*Cough* before It goes un-noticed my suggestion got blocked by your reply
:V :V
Never ever reply to posts with stupid text sizes is rule one .Its unreadable on a phone .
jje
JJEgan said:
Never ever reply to posts with stupid text sizes is rule one .Its unreadable on a phone .
jje
Click to expand...
Click to collapse
LOL
Iam Sorry i Will Edit It
I Just Wanted people to Focus On The problem If They Are In Hurry
When Ever I Boot I Got a Red (!) Sign At Top Left Corner of The Screen I Don`t Know What It Is But Its For Sure A Problem
>>>Of course you have
. Try searching the problem and fix .
When I Plug my USB to the PC it makes a Sound That Something is Connected But It Won`t Show a Device Neither the Phone Show Any Choices (PPTP mode or Memory )
>>>No USB driver wrong cable wrong PC USB port damaged phone usb standard.
Suggest one format system cache data and sd card flash stock rom via Odin .
Suggest two read the basics faqs and guides .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
JJEgan said:
When Ever I Boot I Got a Red (!) Sign At Top Left Corner of The Screen I Don`t Know What It Is But Its For Sure A Problem
>>>Of course you have
. Try searching the problem and fix .
When I Plug my USB to the PC it makes a Sound That Something is Connected But It Won`t Show a Device Neither the Phone Show Any Choices (PPTP mode or Memory )
>>>No USB driver wrong cable wrong PC USB port damaged phone usb standard.
Suggest one format system cache data and sd card flash stock rom via Odin .
Suggest two read the basics faqs and guides .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
""""">>>No USB driver wrong cable wrong PC USB port damaged phone usb standard."
I GOt The Original Samsung USB and i got Odin Installed and Samsung GS3 INT Toolkit and The Driver is Installed (Reinstalled It Nothing Happens )
"""Flash Stock rom Via Odin"""
Well the Way I Fixed the Phone Was Originally Flashing Stock Rom then flashing Custom Rom....
After I Flashed The Stock Rom i Tried connecting Usb it didn`t connect either and Went into reboot loop (When Idle)
"""""""I Have Everything Working""""""""
Just USB AND BLUETOOTH not Working
Guys i Went Into Recovery and went into Advanced >Show Log
Thats What Came Out
unknown volume for path [/sd-ext]
Can`t partition non-vfat: datamedia
Can`t format unknown volume : /emmc
Click to expand...
Click to collapse
Any Help ?
Just to Say The Phone Runs Extremely Fast (Only the 3 Problems i siad Up There)
For Problem Number (1)
I Found out This Topic
http://forum.xda-developers.com/showthread.php?t=2011728
So What I Figured Out That (ALL SAMSUNG GALAXY S3 Came With Android ICS (4.0.4) )
What I Did was Flashing JB Stock Rom ( Maybe SAMSUNG but a New Security mod in it )
anyway it don`t bother Me I Just Want to Know What Is Wrong With My emmc and datamedia and usb, bluetooth
Guys Please help Me With The EMMC fix and USB , Bluetooth not working
:\
1. Why Are You Writing Like This?
2. Why, oh why, did you tick "nand erase all"? Don't use odin if you don't know what it does.
Theshawty said:
1. Why Are You Writing Like This?
2. Why, oh why, did you tick "nand erase all"? Don't use odin if you don't know what it does.
Click to expand...
Click to collapse
1-Like What ???
2-i Used to set custom Roms to HTC HD2 and i always used NAND so i guessed its the same thing :\ i know its a stupid step but now i need help not blame
x3alooshx said:
1-Like What ???
Click to expand...
Click to collapse
every word's first letter is capitalized
It Feels Better
Now For Problem Number 2 the USB I FOund This
Originally Posted by nacos
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
Click to expand...
Click to collapse
are you seriously doing it on purpose?
I suggest you install a stock ROM once you have a working USB driver.
Follow the instructions in this post using the root kit to install the correct drivers;
http://forum.xda-developers.com/showthread.php?t=1703488
Rackers said:
I suggest you install a stock ROM once you have a working USB driver.
Follow the instructions in this post using the root kit to install the correct drivers;
http://forum.xda-developers.com/showthread.php?t=1703488
Click to expand...
Click to collapse
+1 back to stock, will rule out a hardware fault. Which could have occurred coincidentally to your fiddling.
IMHO its best to read and understand before fiddling with stuff like odin, it's very easy to end up with a very expensive paperweight by guessing which boxes to tick.
Sent from my GT-I9300 using Tapatalk 2
x3alooshx said:
It Feels Better
Now For Problem Number 2 the USB I FOund This
Click to expand...
Click to collapse
You seem determined to annoy people, and I'm afraid that isn't going to help your cause
I Just love to see words with first big letter is that wrong does that harm anyone ???
well for the problem...I Guess Flashing a stock is the only option to get Bluetooth back
didn`t try my usb solution yet
gonna post soon
x3alooshx said:
I Just love to see words with first big letter is that wrong does that harm anyone ???
Click to expand...
Click to collapse
It's annoying
x3alooshx said:
I Just love to see words with first big letter is that wrong
Click to expand...
Click to collapse
Grammatically, yes. Grammar Nazis gonna get you.
Sent from my GT-I9300 using Tapatalk 2
you all ignoring helping me just to tell me that i write worng ...yeah thank you...
anyway i tried the sloution for the usb and it didn`t work.......windows detect it as (CDC communication interface)
not only 1 device no almost 5 or 8
Ok
Trying to Unroot.
But today I have this giantic issue.
My recovery mode just doesnt appear anything like before.
I have tried unrooting using a Root_Remover.zip file. But I can't find at all the "install zip" menu in recovery mode I had when I had to root it first ! Now it just wont appear at all. I only have :
Reboot system Now
Apply update from external Storage
Wipe Data/Factory REset
Wipe Cache Partition
and nothing more. I even tried the second menu (apply update from ext.stor.) but im not using any external storage.
I thought "all right, Ill get through it with ODIN >>> WRONG !!!!!! No download mode ...
So right now I'm completely screwed since theres no way I can perform an unroot under such conditions.
Please someone help me out with this, sorry for being a bit too straightfoward but after 72h spent on that @#%? I find it pretty unrelevant that this ****ing menu wont show the hell up. Even though I guess Im just doing something wrong, I need help.
EDIT : All right. So I figured out most tutorials are written by incompetent people whom mostly release pseudo tutorials that are just here to show the world that they can perform this or that, but in fact, can't take a single second to make a point where you don't get access to DOWNLOAD MODE the same way on a Tab2 than with a S2 -_-. We don't enter DOWNLOAD mode the same way ... geez ... so I figured out that using the Up volume button instead of the down volume button would eventually get me there. Which it did. Come on ... how is it possible that after 15 tutorials, not ONE did mention that ?
Also, ODIN doesn't want to do @#%? right now. I browsed the right firmware, plugged my tab to my laptop ... hit START and it ends in 5 seconds after "all thread completed (0 succeed/0 failed)
I've tried multiple stock firmwares (all the same but form different locations or mirrors) and ... nothing. So ...
First, please clarify these couple of questions. What device do you have? What version of recovery do you have? And one more out of curiosity. Where did you get that root remover zip?
Sent from my GT-P7500 using Tapatalk 4
Most of the tutorials are written for the GT-P75xx. Being that it's also the device for the section you posted this rant in, I can see why the tutorials were not what you needed. Just my two cents but condemning the authors of the tutorials will most likely get you very little help. Not to mention this section isn't for your device.
Sent from my GT-P7510 using XDA Premium HD app
Benzoman said:
Most of the tutorials are written for the GT-P75xx. Being that it's also the device for the section you posted this rant in, I can see why the tutorials were not what you needed. Just my two cents but condemning the authors of the tutorials will most likely get you very little help. Not to mention this section isn't for your device.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Don't know what happened to my last reply but anyway :
All the threads I read were for Tab2 p51xx or SII.
As explained in first reply (which disappeared), I had and have my damn good reason to condemn people who spam the net with their useless blogs. Won't waste time explaining again a reason which won't certainly arent interested in. But it was costy in term of $.
That said I then realized XDA still exists so I launched a quick google search and fell on this subboard. Reading "Samsung Tab 10.1", unfortunatly didn't mean to me it is a seperated sub forum from the Samsung tab2 10.1. My bad ... do I have to get this thread transfered to the right place or admins will find it useless ?
_____________
My ROM is none. I unrooted but didn't install any ROM. After that I simply figured out I don't need one. But today I need to upgrade to anything above 4.0.4 after the very bad experience I had late friday eve which is quite costy.
I have one more minor trouble I didn't speak of in my first post :
I bought my tablet in September 2012 in the Netherlands GT P5110, ICS 4.0.4. So after checking on the XDA page where all of the stock firmwares are listed, I realized there is no "perfect" match. The only firmware for the Netherlands and for P5110 is from April 2012 and ICS 4.0.3, not 4.0.4 ; yet it is the one I downloaded. Should I get another one ?
About the Root remover, I uploaded to my tab one I downloaded from a website which I can't recall or find on google right now because I downloaded two from two different websites and only remember this one : www techbloggerzone com/2012/09/how-to-unroot-galaxy-tab-2-101-gt html [dots for WWW | COM and HTML were removed since I'm not allowed to post external links yet]
I think there's nothing else missing, but tell me if there is.
IMPORTANT EDIT : I just realized the factory usb plug I have for the Samsung must be damaged. It charges on sector, but isn't identified properly on my laptop and thus won't let me connect it by wire. Didn't figure this out earlier as I did all transfers by Kies wifi. Damn ... but it only explains why Odin can't upload anything to my tab, not why I can't use find the zip install option in Recovery mode for the root_remover.zip
As already stated you're in the wrong place but we all try to help each other here...but no more rants or you might find a stoney silence will be your only reply....
Problem with Odin is more likely laptop drivers and/or windows version and not your cable...
Samfirmware has many 4.0.4 roms for your "area", they have a 4.1.2 version for Netherlands and 4.0.4 for Belgium, Luxembourg etc. As long as you find an XX version it will have Dutch language option.
The recovery you described when you eventually got into it sounded like stock recovery so you wouldn't be able to choose and flash zip from there
Calm down, take a deep breath, get your laptop and drivers sorted first or you'll not get anywhere... Did you have a yellow indication with com port number in the Odin window, if not it is surely drivers. Does windows in any way recognise the tab when connected? (warning tone, does device manager show anything?)
sent from my still superb Google I/O 7510 (xda hd)
stinky73 said:
As already stated you're in the wrong place but we all try to help each other here...but no more rants or you might find a stoney silence will be your only reply....
Problem with Odin is more likely laptop drivers and/or windows version and not your cable...
Samfirmware has many 4.0.4 roms for your "area", they have a 4.1.2 version for Netherlands and 4.0.4 for Belgium, Luxembourg etc. As long as you find an XX version it will have Dutch language option.
The recovery you described when you eventually got into it sounded like stock recovery so you wouldn't be able to choose and flash zip from there
Calm down, take a deep breath, get your laptop and drivers sorted first or you'll not get anywhere... Did you have a yellow indication with com port number in the Odin window, if not it is surely drivers. Does windows in any way recognise the tab when connected? (warning tone, does device manager show anything?)
sent from my still superb Google I/O 7510 (xda hd)
Click to expand...
Click to collapse
I thought I had all my drivers updated (for the samsung tab, installed like two or three weeks ago), so if it's about drivers, then I don't get it . I checked that in the first place. The cable sometimes fails the connection to my laptop, but today it just won't work. :/. Windows recognizes the device as an external object which can't properly install and such connect (yellow pop up message in right corner, over the task bar). I do not exactly undersatnd what you mean by a yellow indication with "com port" number in the Odin window, but I don't think I had that ... in fact I'm pretty sure about it.
If it's just about drivers, where can I go to find the latest ?
Try looking in Samsung site for drivers here http://www.samsung.com/us/support/
What version of odin are you using? Would recommend 1.3 for the tab 2.
The indication of com port in odin is as in attached image, if you haven't got that then the computer is not recognising your tab, either because of drivers, or cable, but as we've said, you should start with the drivers, probably by downloading the latest from Samsung, deleting all drivers you have at the moment then re-installing.
If the tab is not recognized by the computer then programs like odin cannot do anything as they use the computers' usb bus...
stinky73 said:
Try looking in Samsung site for drivers here
What version of odin are you using? Would recommend 1.3 for the tab 2.
The indication of com port in odin is as in attached image, if you haven't got that then the computer is not recognising your tab, either because of drivers, or cable, but as we've said, you should start with the drivers, probably by downloading the latest from Samsung, deleting all drivers you have at the moment then re-installing.
If the tab is not recognized by the computer then programs like odin cannot do anything as they use the computers' usb bus...
Click to expand...
Click to collapse
Thank you very much !! I was using Odin 1.85 and Odin 3.7 (used 1.85 for rooting), I'll try a downgraded version.
Keep you in touch if problems are resolved or not after that. Thank you again.
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
usm125 said:
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
Click to expand...
Click to collapse
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Shrewdy said:
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Click to expand...
Click to collapse
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
usm125 said:
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
Click to expand...
Click to collapse
I am not sure... but you can try this guide here ...
http://forum.xda-developers.com/showthread.php?t=1840030
Since it is already bricked... you can take all the chances to revive it....
And i searched on the internet and there is a lot of stuff available for Qhsusb_dload Mode you mentioned above.... take the chances ...:good:
my dear the link you send me is for those phones whose are getting into download mode and turned on. but my phone is dead. bettry is charged.but when ever i am connecting my phone to pc.it does not shows me in odin. the drivers and every thing is properly installed. i needs some one's help who is understanding about my problem. my device is hard brick. it is not going to turn On. also not going into any download mode or recovery...i know there is no way without jtag. but currently jtag is not in my range. so i want turn on it my self. there is alot of members who is eligible to solve my problem. but i think they are busy some where that's why they are not helping me. but i am still waiting ....
Motheboard replacement or JTAG.
MistahBungle said:
Motheboard replacement or JTAG.
Click to expand...
Click to collapse
i am sorry to say but there is a members who can able to fix these problems have a proof take a look here
http://forum.xda-developers.com/showthread.php?t=1914359&page=10
the member name darkspr1te is able to fix my problem and the member E.V.A Too.
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
MistahBungle said:
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
Click to expand...
Click to collapse
i already said in my post if the people's who dont know about my problem should not reply in my thread,
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
MistahBungle said:
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
Click to expand...
Click to collapse
These Things Are Not in MY Range.
Then your phone stays busted *shrugs*
MistahBungle said:
Then your phone stays busted *shrugs*
Click to expand...
Click to collapse
i needs help not a sadness..
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed