Related
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
hello, i tryed to install an ics os and took too much time to ''setup conection'' in odin , so i closed it... i know that was a big mistake but can any1 tell me what to do now? my phone isnt starting and it appears a phone, a computer and a dot line betweeen them with an ''!'' mark . sorry for my bad english and please help. thanks
i have had this issue and what i did is following this tutorial (sorry i dont want to spam guys)
http://galaxys2root.com/galaxy-s2-unroot/how-to-unrootunbrick-your-galaxy-s2-i9100-ics/
i hope that will help you
ellementX said:
hello, i tryed to install an ics os and took too much time to ''setup conection'' in odin , so i closed it... i know that was a big mistake but can any1 tell me what to do now? my phone isnt starting and it appears a phone, a computer and a dot line betweeen them with an ''!'' mark . sorry for my bad english and please help. thanks
Click to expand...
Click to collapse
U can go into download mod vol down + home buttom + power buttom ? Is not u need a usb jig
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
ellementX said:
hello, i tryed to install an ics os and took too much time to ''setup conection'' in odin , so i closed it... i know that was a big mistake but can any1 tell me what to do now? my phone isnt starting and it appears a phone, a computer and a dot line betweeen them with an ''!'' mark . sorry for my bad english and please help. thanks
Click to expand...
Click to collapse
Firstly, NEVER, ever, ever, ever use titles like "please help" and nothing else. Its extremely annoying for many people so you have less chance of getting a accurate answer. Use proper titles that describe the topic, titles are supposed to be descriptive, not simply somebody saying "help", that doesn't describe your topic to people browsing sections in any way other then its a n00b panicking about something.
Second, which model/variant do you have?
Which rom did you try and install?
Which guide did you use?
What EXACTLY did you do?
You need to provide more info if you expect answers/help.
At this moment people can only tell you to enter download mode and flash back to stock via odin.
If you don't know what download mode or odin is then you simply should not have been flashing your device as you obviously haven't read anything properly.
ok I am sorry and you are right... well i downloaded an ics from a site (can't remember) and i tryed to install ... first 2-3 times i got some fails in odin... then i closed and restarted it and it worked... at last for some mins... it blocked at ''setup conection'' step. after a while i closed the phone and odin and when i tryed to open the phone appeared a phone,a computer and a dot line with an ''!'' mark on it. now if i try to put it into download mode ( vol.down + home+power ) gives me same thing with that image and also with vol.up+home+power so this means i cant do anything with my phone...can't open,can't put it into download mode,and also cant restore to factory settings
ellementX said:
ok I am sorry and you are right... well i downloaded an ics from a site (can't remember) and i tryed to install ... first 2-3 times i got some fails in odin... then i closed and restarted it and it worked... at last for some mins... it blocked at ''setup conection'' step. after a while i closed the phone and odin and when i tryed to open the phone appeared a phone,a computer and a dot line with an ''!'' mark on it. now if i try to put it into download mode ( vol.down + home+power ) gives me same thing with that image and also with vol.up+home+power so this means i cant do anything with my phone...can't open,can't put it into download mode,and also cant restore to factory settings
Click to expand...
Click to collapse
This is what you get when you read and use instructions from some random crappy/sites or blogs or you dont read instructions properly, flash wrong files to your phone etc etc.
Remove battery for 10-15 mins and then replace, see if you can get into download or recovery.
If not buy or make a USB Jig and use that to see if you can get into download.
If not you will need to do/get a JTAG repair or send to Samsung and play dumb about what you have done, Just say you was using Kies and it failed or somthing, Hopefully they will repair.
ellementX said:
ok I am sorry and you are right... well i downloaded an ics from a site (can't remember) and i tryed to install ... first 2-3 times i got some fails in odin... then i closed and restarted it and it worked... at last for some mins... it blocked at ''setup conection'' step. after a while i closed the phone and odin and when i tryed to open the phone appeared a phone,a computer and a dot line with an ''!'' mark on it. now if i try to put it into download mode ( vol.down + home+power ) gives me same thing with that image and also with vol.up+home+power so this means i cant do anything with my phone...can't open,can't put it into download mode,and also cant restore to factory settings
Click to expand...
Click to collapse
well i downloaded an ics from a site (can't remember) well thats helpful to know lol
after a while i closed the phone and odin and when i tryed to open the phone appeared a phone,a computer and a dot line with an ''!'' mark on it. now this has killed your phone why oh why did you not read prior to trying this
i cant do anything with my phone...can't open,can't put it into download mode,and also cant restore to factory settings so basically you now have a expensive paper weight u may need JTAG repair not sure if jig would work??
shame really s2 a really good phone lol
You still haven't said which model you have. It's on the label under the battery.
And the pc - ! - phone screen is a forced download mode. You should be able to flash from there as long as your computer detects the phone from Odin.
solved
hello guys i solved my problem... i just did exactly what is in this post http://forum.xda-developers.com/showthread.php?t=1619571 and i feel free to thanks that guy
So it was a G model ???
jje
ellementX said:
hello guys i solved my problem... i just did exactly what is in this post http://forum.xda-developers.com/showthread.php?t=1619571 and i feel free to thanks that guy
Click to expand...
Click to collapse
Work on reading instructions (and in general, really... You PMed me despite my signature requesting no tech support PMs) more thoroughly. You were asked multiple times what model phone you have, and never answered. If you had provided that information, someone could have directed you to that guide faster.
And if you successfully used that guide (which implies you have an i9100g, and NOT an i9100), then stick to i9100g firmwares and kernels. If you DO indeed have an i9100g, and flash i9100 firmwares or kernels, you'll end up back in the same boat.
I'm not sure my s3 bricked or not, yesterday i try to flash a new firmware MC3. But it was fail after, i was trying to flash older firmwares but it didn't work either. I can't turn on s3, it's also said "Please connect with KIES for recovery", i plugged it to computer but it doesn't seem connect with my computer. Please help, thanks so much.
hoangtung619 said:
I'm not sure my s3 bricked or not, yesterday i try to flash a new firmware MC3. But it was fail after, i was trying to flash older firmwares but it didn't work either. I can't turn on s3, it's also said "Please connect with KIES for recovery", i plugged it to computer but it doesn't seem connect with my computer. Please help, thanks so much.
Click to expand...
Click to collapse
Make sure you put your phone in download mode, and also Samsung USB Drivers installed on your PC. Try other USB cable if it did'nt work. Redownload the firmware, maybe it is a corrupted file
If you can boot into recovery then format data and cache, that might make the phone bootable again. If that doesn't help then boot into download mode as above and flash the correct stock rom via odin.
If it won't boot into download then you have a hard brick, service centre repair required.
fanbogo said:
Does anyone know how to run triangle away on SGS 3 without downloading additional data? The point is that I bricked my device, somehow lost IMEI and put phone into factory mode, wifi doesn't work, the same goes for mobile networking. I'd like to give it back to where I bought it from but in Odin mode you can see that the custom binary download is yes (10 counts). In other words I'd appreciate it if you told me what to do to return the device and get it fixed or replaced. Thank you.
Click to expand...
Click to collapse
Have you tried without downloading or used some other wifi .
Please stop hijacking other threads all the time .
jje
JJEgan said:
Have you tried without downloading or used some other wifi .
Please stop hijacking other threads all the time .
jje
Click to expand...
Click to collapse
sorry mate, I'm desperate. It can't be done without mobile networking or wi-fi because it claims it needs some additional data.
fanbogo said:
sorry mate, I'm desperate. It can't be done without mobile networking or wi-fi because it claims it needs some additional data.
Click to expand...
Click to collapse
Do not spam the forums, I have deleted your posts. Did it ever cross your mind that the best way to get an answer would be to create your own thread in the Q&A forum and give as much detail in there as you can? If it didn't cross your mind then I would suggest doing it.
Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.