[Q] Samsung S7262 Brick - Android Q&A, Help & Troubleshooting

Samsung S7262 Brick
How To Unbrick Samsung S7262

Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!

uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??

S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.

Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:

@ wahab96
Need Spered 6820i Fdl Files.
Thank You

uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!

wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.

uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:

wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.

that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!

wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You

uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly

good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS

so, did anyone maneged to repair this set ?

wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone

Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.

GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..

Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!

I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................

Related

i777 NO ODIN/ NO BOOT/ NOT RECOGNIZED/ NO DOWNLOAD-MODE/ NO RECOVERY-MODE/ NO CWM

One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Ok so this might look dumb of me, but I am desperate here. I know its a weekend, and everybody is drunk. And probably I am the only lonely trying to figure out what the hell is ADB!
I look up to this site and the developers here. And I shouldn't, but I have, started expecting from all of you knowledgeable individuals. I would be hurt to be let down. Please help!
Thank you everyone in advance.
Not sure if this is what you're looking for but worth checking out.
http://developer.android.com/tools/help/adb.html
try using a "USB JIG" see if that helps you to get into download mode...did u try remove battery,plug-in USB and insert battery while holding download mode combo(VOL up+VOL dwn and may be power button too)see if that gets you into download mode or else try USB JIG...i suggest check Entropy and creepycrawler posts
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Click to expand...
Click to collapse
These links are #1,4,5,6 and 7 on my google results:
[GUIDE] ADB Driver Install for Dummies
[GUIDE] ADB - Usage, Tips, Tricks and More!
[GUIDE] (For Noobs) SDK, ADB, and Drivers
[GUIDE] ADB Workshop and Guide for everyone
[HOW-TO] ADB for Dummies(How-To Learner's Guide)
I'm an adb nub, but pretty sure debugging need to be have already been enabled in development options for you to be able to get in that way.
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Click to expand...
Click to collapse
Remove battery and keep it for approx 15 min
then plug in battery chk if its wrkin or get a usb jig and chk if it gets to download mode..
if it dosin show any sign of life
then
keep it for chargin and check if the portion below the camera is gettin hot
if it is then u have hardbricked ur phone
ALSO PLEASE DO NOT USE ROM MANAGER IT HAS BRICKED MANY S2
If it is in warranty then u can claim it but don do the mistake of tellin them u rooted or nything
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Oh and the part about all of us being drunk
Click to expand...
Click to collapse
**All my favorite parts of the story are in bold :laugh:
I hope you're under warranty man, best of luck
jthatch12 said:
**All my favorite parts of the story are in bold :laugh:
I hope you're under warranty man, best of luck
Click to expand...
Click to collapse
I wonder if it was his friend...
122ninjas said:
I wonder if it was his friend...
Click to expand...
Click to collapse
Haha me? Nope no idea who the kid is. Friends don't let Friends use Rom Manager.
Thank you all of you insightful people to have atleast commented and helped in the ways you could. I am pretty sure I have hard-bricked my phone.
My next steps of action:
1. Go to AT&T shop and confirm on my warranty.
2. http://mobiletechvideos.mybigcommerce.com/
3. If above 2 steps don't work, quit android till I get a job :crying:
Thank you all of you \m/
neerajganga said:
Remove battery and keep it for approx 15 min
then plug in battery chk if its wrkin or get a usb jig and chk if it gets to download mode..
if it dosin show any sign of life
then
keep it for chargin and check if the portion below the camera is gettin hot
if it is then u have hardbricked ur phone
ALSO PLEASE DO NOT USE ROM MANAGER IT HAS BRICKED MANY S2
If it is in warranty then u can claim it but don do the mistake of tellin them u rooted or nything
Click to expand...
Click to collapse
I just got the USB-JIG. I followed the instructions you mentioned, but it does not work. The USB-JIG does not help either.
Im actually in the process of moving interstate. Once its done, I will contact the local AT&T shop to find out more on warranty replacement, since I am still under warranty.
Thank you anyway; even if it didn't start my phone, I still learnt a lesson: NEVER DO ANDROID STUFF IN OFFICE TIME, OR YOUR STUPID FRIEND WILL UNPLUG YOUR PHONE THINKING ITS JUST CHARGING.
nikhilppatel said:
I just got the USB-JIG. I followed the instructions you mentioned, but it does not work. The USB-JIG does not help either.
Im actually in the process of moving interstate. Once its done, I will contact the local AT&T shop to find out more on warranty replacement, since I am still under warranty.
Thank you anyway; even if it didn't start my phone, I still learnt a lesson: NEVER DO ANDROID STUFF IN OFFICE TIME, OR YOUR STUPID FRIEND WILL UNPLUG YOUR PHONE THINKING ITS JUST CHARGING.
Click to expand...
Click to collapse
if nothin shows up usin jig
then ur phone is dead
get it to service center
and they wud replace it
jus don tell them wat u did
neerajganga said:
if nothin shows up usin jig
then ur phone is dead
get it to service center
and they wud replace it
jus don tell them wat u did
Click to expand...
Click to collapse
Then you would be what we like to call a "moneyover" don't do that, mobiletechvideos.com probably can fix it
Sent from team Pirate! Using Tapatalk 2
Just got my i777 back from MobileTechVideos.com. An excellent lesson learnt at an affordable price. Pure gingerbread bonestock.
And I'm headed down the same rooting business. One a droid, always an-droid
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
nikhilppatel said:
Just got my i777 back from MobileTechVideos.com. An excellent lesson learnt at an affordable price. Pure gingerbread bonestock.
And I'm headed down the same rooting business. One a droid, always an-droid
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Let's hope you've done some reading.
Sent from my SGH-I777 using Tapatalk 2

SHV-E120L Brick Needs Rescue Team Help

Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
usm125 said:
Hello Every All!
I have this device name s2 hd lte shv-e120L. Which Is Brick by my mistake. it was a rooted device and i was copying these files
"1. /system/lib/libril.so
2. /system/lib/libsec-ril.so
3. /system/lib/libsecril-client.so
4. /system/lib/libsecril-client-sap.so(4.0.4+)
5. /system/bin/drexe" unfortunately i moved the files to another folder. when the device restart it gives me a logo some thing like that. then i connect the device with pc. and run the odin 3.07 . and select the md5 file which worth about 950 mb.(which has included rom firmware every thing full package). the odin flash modem amss.bin sucessfuly but was stop at when it was flashing system .i retries many times. i change the odin version. odin 3.05 or odin 1.85 but nothing happens i change the flash package. i download the orignal firmware from sammobile. and try to flash. but i was getting some thing like xml...write faild error at the start. then i decide to flash cwm recovery backup. which i has already made before some days. the odin shows some thing like coppying files 2 minutes remaining. getting reponse 2 minutes left. etc . i stoped the flashing and then suddenly my cell was turned off.. and when ever i connect my device it shows me Qhsusb_dload. i installed the drivers. device manager shows me Qualcomm HS-USB Dloader 9008 (com3)..
Then I Take A Serach And Read Out Many Threads . at Last I Go to Vendor And Got The Live Desktop Cd Of Ubunto 12.4 . I Installed. And Download the files Brickfix 1 . Brickfix 2.1 .Pythone. Etc . I Read The Method Posted
http://forum.xda-developers.com/showthread.php?t=1914359&page=7
.i open the Qpst As Admin. Add A Port Name com 3. then i opened the sw name emmcswdownload as admin. i copy paste the files mentioned in the procedure.as i post screenshot. but when ever i click on the download i got the error like that cookie not present , mentioned in the screen shot.i need the sollution of it. i did nt have any jtag. also not able to use this service. i have usb cable s2 (bricked) .internet. pateince.
Plz Suggest me What To Do. If u dont know the situation. plz dont reply.i am really in problem. i needs every kind of help. senior members. developers. and many other freinds welcome to read my thread. still waiting for your replies,
Click to expand...
Click to collapse
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Shrewdy said:
Ok...first i need to know certain things...
1. Does you device boot into download mode??....if it does then it is not brick its only soft brick and can be revived....:fingers-crossed:
A device that is truly Bricked will not even turn on....it will simply not show anything on the screen...no matter what !!
So if your device boots into download mode then don't worry and don't lose hope...:good:
2. Tell me if it boots into recovery....??
if not ... then try to flash a recovery using odin....
if it does ... then first of all Wipe Data/Cache and Dalvik Cache
copy a rom on your sd card and flash it through the recovery... and then Wipe Data/Cache and Dalvik Cache again...
Let me know if anything helped ... and let me know other updates.... Hope things work for you...
Thanks
Click to expand...
Click to collapse
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
usm125 said:
Thanks Bro For Your Reply. But My Device Is Totally Hard Bricked. it Does not Turn ON. As i Said i am getting. Qhsusb_dload Mode. that means my device is totally ****ed off.
Click to expand...
Click to collapse
I am not sure... but you can try this guide here ...
http://forum.xda-developers.com/showthread.php?t=1840030
Since it is already bricked... you can take all the chances to revive it....
And i searched on the internet and there is a lot of stuff available for Qhsusb_dload Mode you mentioned above.... take the chances ...:good:
my dear the link you send me is for those phones whose are getting into download mode and turned on. but my phone is dead. bettry is charged.but when ever i am connecting my phone to pc.it does not shows me in odin. the drivers and every thing is properly installed. i needs some one's help who is understanding about my problem. my device is hard brick. it is not going to turn On. also not going into any download mode or recovery...i know there is no way without jtag. but currently jtag is not in my range. so i want turn on it my self. there is alot of members who is eligible to solve my problem. but i think they are busy some where that's why they are not helping me. but i am still waiting ....
Motheboard replacement or JTAG.
MistahBungle said:
Motheboard replacement or JTAG.
Click to expand...
Click to collapse
i am sorry to say but there is a members who can able to fix these problems have a proof take a look here
http://forum.xda-developers.com/showthread.php?t=1914359&page=10
the member name darkspr1te is able to fix my problem and the member E.V.A Too.
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
MistahBungle said:
1) I call bull**** on that (for the SGS2 at least).
2) If those people are fixing it for you, why are you posting in this thread ?
Bottom line is, if the phone won't boot, you ain't fixing it.
The end.
Click to expand...
Click to collapse
i already said in my post if the people's who dont know about my problem should not reply in my thread,
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
MistahBungle said:
Unfortunately you don't get that option on XDA, you put a thread up, anyone can reply (unless it's a development thread, which this isn't).
My earlier diagnoses of motherboard replacement or JTAG stand.
Click to expand...
Click to collapse
These Things Are Not in MY Range.
Then your phone stays busted *shrugs*
MistahBungle said:
Then your phone stays busted *shrugs*
Click to expand...
Click to collapse
i needs help not a sadness..

[Q] Help in restore an (almost) bricked HUAWEI G610S-U00

Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
andbrigo said:
Hi everyone! I'm asking a desperate help to solve a problem about recovery an almost bricked Huawei G610S-U00.
I tell you the story...
Few days ago I've tried to flash the original firmware of this device with the SP Flash Tool. The firmware has been downloaded from another forum.
The flash procedure ends successfully but when I've tried to reboot the phone it powers on correctly but the screen remain black. I can say it turn on correctly because you can see the back ligth of the screen and you also che feel the vibration pushing the power on button.
Now I think that the problem is due to an wrong scatter file or a wrong firmware version.
Now the situation is that the phone turns on and is recognized by the SP Flash Tool and I can do flashing operations but I need the correct files to flash.
Can anyone help me in this situation?
I really thank everyone could help!
Thank you very much
Click to expand...
Click to collapse
No one can help?
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
jazzymc said:
Same problem here. I've downloaded a rom and flashed via SPFlash tools and I end at black screen. But once connected to usb the phone is recognized by the PC so it can be flashed if I have the right files. So if possible , someone with G610s , please make a whole backup and give us the file so we can flash . Please !
Click to expand...
Click to collapse
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Mine is blank as well
andbrigo said:
Hi, I've solved the problem using a full backup given me from a friend.
I upload it to a cloud and then I will give you the link.
:good:
Click to expand...
Click to collapse
Hi bud, i understand it's an old thread but same thing happened to my G610 U00 and the only option i have is a proper rom for sp flashtool, please if you may, upload the link to the one that saved your phone, thanks ahead!

[Q] BML ONEmini : Bluetooth & WIFI aren't working

Well, it's simple.
I've been scammed for the first time on eBay.. I bought a phone I thought was a good piece of ****, But when it arrived.. I found an SC6820-based single core 1.0 GHZ phone, with 212MB RAM, GPRS quad band network (****ing 1G..), and a fake Android 4.2.2 ROM based on MocorDroid 2.3.5. Not to mention it took me ages to successfully root it to delete useless system apps..
The phone is a chinese - " BML ONEmini 4" ", Model " E19 ".
Model:E19
Battery:26%
Firmware version:4.2.2
Status:ROOTED
Resolution:480*800
Manufacturer:Unknown
Serial:*****************
IMEI: *****************
IMSI:*****************
MAC:*****************
Android Version:4.2.2
Baseband version: DM_BASE_12A_W13.10|sc6820_modem|03-06-2013 19:20:35
Kernel version:sprdroid_base-user 4.2.2 MocorDroid2.3.5_Trout gc925_1.03_jhm_e19_v06 test-keys
Click to expand...
Click to collapse
Anyway, the problem is simple.
When I turn on WIFI, it finds networks around the area, But when I try to connect into one of them, Just NOTHING happens.. As if I never pressed "Connect". Same happens with my home WIFI, 1cm close to my router.
And the Bluetooth... Well, when I turn it on and start scanning for devices, It just won't find any of my Bluetooth devices... And it's set to be visible.
... And yeah, trust me, I know how to work with my Bluetooth devices.. They're flawless, and were waiting for an answer like good boys... But nothing happens, It doesn't find any devices.
That's pretty much all guys... I hope you can help me somehow, Is there a way to fix the WIFI and Bluetooth here..? So I can at least do something with this piece of ****, lame excuse of a phone..?
It's probably a problem with the ROM, huh..? But still, what do I do...
Thank you.
Well..?
Hi
I have the same phone, that I bought it few days ago. but with a little difference. I bought it as broken phone, the phone was dead and when I tried to turn it on, it was just vibrating. anyway I searched the web and found a proper working rom for it use this rom and write it to your phone. I hope this rom fix your problem .
this is the link for rom: http://www.needrom.com/mobile/bml-one-mini-sc6820/
if you needed any help to update firmware just tell me.
good luck
flashing Spreadtrum phone
samsonmagu74 said:
Hi, I just read your post on your success on flashing a BML One Mini. I am having trouble flashing it with the Research Download tool it just wont work. How did you get it to work? Thanks in advance.
Click to expand...
Click to collapse
Somebody asked me how to flash an Spreadtrum phone with Research Download tool. I am answering him/her here so some one else may find this useful. and sorry for my bad english in advanced
here are the steps.
1. charge battery at least 50%
2. download Spreadtrum Drivers and install them ( I have downloaded them while ago and now I cant give you exact link, so please google it)
3. take out the battery of your phone, then connect it with usb cable to pc, then while pushing the "vol down" key insert back the battery.(here unknown device will pop out and will install the driver.
4. then you can see that there is a com port added in device manager.
5. take the battery out again
6. now open Research Download tool and then click "load packet" button(first one on the left) and point to your downloaded pac file
7. now press "start downloading" button
8. again while pushing the "vol down" key insert back the battery.
9. download process starts, and if the pac file is right for your phone it will complete and you will see "passed" in the Research Download
that is all, have fun :highfive:
rayle20 said:
Somebody asked me how to flash an Spreadtrum phone with Research Download tool. I am answering him/her here so some one else may find this useful. and sorry for my bad english in advanced
here are the steps.
1. charge battery at least 50%
2. download Spreadtrum Drivers and install them ( I have downloaded them while ago and now I cant give you exact link, so please google it)
3. take out the battery of your phone, then connect it with usb cable to pc, then while pushing the "vol down" key insert back the battery.(here unknown device will pop out and will install the driver.
4. then you can see that there is a com port added in device manager.
5. take the battery out again
6. now open Research Download tool and then click "load packet" button(first one on the left) and point to your downloaded pac file
7. now press "start downloading" button
8. again while pushing the "vol down" key insert back the battery.
9. download process starts, and if the pac file is right for your phone it will complete and you will see "passed" in the Research Download
that is all, have fun :highfive:
Click to expand...
Click to collapse
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
samsonmagu74 said:
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
Click to expand...
Click to collapse
No problem dear friend, I am glad that I could help you.:good:
htc j one mini china
samsonmagu74 said:
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
Click to expand...
Click to collapse
i follow all rules but the phone screen is white after i flash it

[Request] Vodafone Smart Prime 6 (VF-895N) Stock ROM

Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
I have found the KERNEL SOURCE under the "Open Source Code" here: http://www.vodafone.com/content/index/about/what/devices/smartprime6.html !!!
Thanks in advance!
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Can you boot to fastboot/download mode?
Try to use ADB to restore the stock ROM files, unfortunately I don't know where to find the stock ROM files
Sent from my VF-895N using XDA Free mobile app
Please help
trentinmarco said:
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Click to expand...
Click to collapse
i bricked my smart prime 6 aswell do you know how to use the sorce code?
Num3 said:
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
Thanks in advance!
Click to expand...
Click to collapse
Hi,
sorry to read that, actually I got this phone from a friend who lost mine (here in Czech Republic) and I did root it, but I saw that many people had problem after rooting so I un-rooted and at the moment it's working properly... I think there is also this "Purify" maybe it did mess with the rom uninstalling things or who knows what...
I hope you find the way to restore the software...
Hi guys i m looking for rom for this phone as well i have 2 phone after i update phone phone stuck now can some one give me firmware for this phone plz
Hey, I bricked this phone as well
any stock rom to download and flash in recovery?
please, thanks a lot
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
dragontass said:
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
Click to expand...
Click to collapse
I need too
Plus88 said:
I need too
Click to expand...
Click to collapse
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Plus88 said:
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Click to expand...
Click to collapse
Many thanks - it worked perfectly! :good:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
could you explain in more detail how you shorted the phone please iv bricked my v895n
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
peraoterangi said:
Click to expand...
Click to collapse
Hi,
What exactly is:
"Short the test point next to the sim card holder to ground"
dragontass said:
Many thanks - it worked perfectly! :good:
Click to expand...
Click to collapse
Can someone help I went on the link provided htcmedia and download the unbrick zip when I used suger flash tool it got stuck at 2 percent does anyone have password or can post steps on how you got to work thanks guys u da best
Should I put my phone in download mode when connected to sugar qct-sp when I press upgrade because I get to 2percent even after 15 mins didn't budge I hope someone can help
If you try to root with KingRoot, works. But follow the next steps:
-reboot your phone into recovery mod using POWER BUTTON + VOLUME UP BUTTON
-next select english using POWER BUTTON
-next select "WRITE PROTECT SWICH" and select "set write protect off"
-now reboot your phone and start the KingRoot and Root.
-Now your device is rooted.
I need a stock ROM so badly. I removed some system apps I don't use but now I can't update.
Here's the log:
nstalling zip file '@/cache/recovery/block.map'
Installing zip file '@/cache/recovery/block.map'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
sysutil: mmapped 19 ranges
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
sysutil: mmapped 19 ranges
Verifying current system...
failed to stat "/system/app/Calendar/Calendar.apk": No such file or directory
file "/system/app/Calendar/Calendar.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: "/system/app/Calendar/Calendar.apk" has unexpected contents.
"/system/app/Calendar/Calendar.apk" has unexpected contents.
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '@/cache/recovery/block.map'
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
What you mean "Short the test point next to the sim card holder to ground." Sorry, I not understand! Can you show a picture please!?
1st custom ROM for VF-895N: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/

Categories

Resources