Related
hi guys,
I have Neatrom LSN(4.6.1) installed with the LSN Crt off animation mod. This problem occures with the original philz kernel as well as the newest dorimanx kernel.
Whenever my phone is on its lockscreen(pattern lock) and i push the powerbutton, the CRT animation activestes. The problem is that the screen turns on again after it turns off from the CRT animation. Does anyone know what causes this?
Also: could anyone explain to me what the "xxxx onset delay" in STweaks does in relation to the CRT Animation? I dont really understand it's description.
I also got SOD on the dorimanx kernel in an app after I pushed the powerbutton a second time without waiting for the CRT animation to finish. Is that common knowledge or is there something I can do to fix this(except not to do it and to let it play out).?
Thanks a lot
have to push Vibrate two times to activate it(the first time it jumps back to ringer)
--
I wish I could post this into the Neatrom thread but I need to get 10 Posts first -.-
Philz Kernel doesn't support crt off properly, if ur going to use Dorimanx then u need to edit a setting in stweaks, called something like fb suspense delay to 100ms and it'll work fine.
Or u could try a different kernel that supports it by default like apolo, speedmod or jeboo
Sent from my GT-I9100 using Tapatalk 2
Hayth said:
Philz Kernel doesn't support crt off properly, if ur going to use Dorimanx then u need to edit a setting in stweaks, called something like fb suspense delay to 100ms and it'll work fine.
Or u could try a different kernel that supports it by default like apolo, speedmod or jeboo
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I use Dorimanx and I did set it to 100ms and after that to try another setting,to 150 ms
Sadly that doenst change the fact that the screen turns back on after I try to turn the display off on the lockscreen
Same problem here...
I'm in stock Samsung LSN (deodexed), with Apolo kernel (it's a great kernel, btw).
When I push the power button while I'm on lockscreen, sometimes the CRT animation works fine, sometimes doesn't; and when it works fine, sometimes the screen turns on again in less than 1 second...
It's annoying...
I'm using this CRT-Off mod: http://d-h.st/YoW
Any idea of how to fix this issue?
Nobody knows?
Same problem here!
I'm in stock Samsung LSN (deodexed), with jeboo kernel
i used this method to get crt-off
Mirko ddd
Same problem here!
I'm in LSN (deodexed), with apolo kernel
Hi again.
I think this issue is kernel related.
I was on Apolo kernel v4.5 and I was having this issue. But I installed Apolo v4.9 two days ago, and I haven't had this issue anymore, so I think that the problem has been solved just with the kernel change.
Can anybody try Apolo kernel v4.9 and confirm that the issue is gone?
Thanks you very much for having find my big problem.
Since the dorimanx v9.34 the CRT is buggy totally. I've the same bug than you !
Screen on / Screen off, change the cpu speed governor and consome a lots of ressources when it occures 300X in a night
SO i just turned off the CRT, and all is very FINE.
I'm on SlimBean 4.2.2 Sabermod with dorimanx 9.38 on i9100 device.
MANY THANKS again :laugh:
thebigtross said:
Thanks you very much for having find my big problem.
Since the dorimanx v9.34 the CRT is buggy totally. I've the same bug than you !
Screen on / Screen off, change the cpu speed governor and consome a lots of ressources when it occures 300X in a night
SO i just turned off the CRT, and all is very FINE.
I'm on SlimBean 4.2.2 Sabermod with dorimanx 9.38 on i9100 device.
MANY THANKS again :laugh:
Click to expand...
Click to collapse
I'm glad to hear that, mate, but I hadn't to disable CRT-Off effect to solve the problem. All I did is to change the Apolo kernel, from v4.5 to v4.9, and now CRT-Off effect works flawlessly everytime.
I used Dorimanx kernel long time ago, but imho, Apolo kernel is more battery friendly and works very well for me. Only one thing: note that Apolo kernel works only in stock based roms...
thx for help
I have just flashed android 4.3 Carbon rom, and i cant find an option to set screen mode to dynamic, movie, natural etc.. Can it be solved or should i change an older Carbon rom?
Sziklián said:
I have just flashed android 4.3 Carbon rom, and i cant find an option to set screen mode to dynamic, movie, natural etc.. Can it be solved or should i change an older Carbon rom?
Click to expand...
Click to collapse
If you have a kernel which supports stweaks you can change it via there...
gutavo_s and dorimanx kernel support stweaks but gustavo is better in my opinion
Sent from my iPhone using Tapatalk
Q
erdal67 said:
If you have a kernel which supports stweaks you can change it via there...
gutavo_s and dorimanx kernel support stweaks but gustavo is better in my opinion
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I have dorimanx kernel 8.43, but i can only set the blue and red color scale in Stweaks, there's no option for mDNIe settings.
I have copied DeviceSettings.apk from an other rom to system/app, and it worked after a reboot!:laugh:
Q&A for [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.3/6.0 (08-07-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
No sound during call
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
eb6 said:
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
Click to expand...
Click to collapse
Hi,
make sure your init.d folder does not contain left overs of other kernels.
Especially when you were on Agni Pure before, this is a known issue as it overwrites Boeffla-Settings in an incompatible way.
Andi
eb6 said:
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
Click to expand...
Click to collapse
Lord Boeffla said:
Hi,
make sure your init.d folder does not contain left overs of other kernels.
Especially when you were on Agni Pure before, this is a known issue as it overwrites Boeffla-Settings in an incompatible way.
Andi
Click to expand...
Click to collapse
I had similar problem with sound. Just before writting here I realized that I flashed again Boeffla after testing different kernel. After cleaning - see above - issue disapperared.
Wrong section, delete.
kernel issue
hi good night i install the kernel today with the rom back-to-n00t- and when boot i lose my sdcard (internal) i uset a cwm touch as well and have a issue with that, i have to remove the kernel for keep my internal sdcard, some can help me?
Cwm touch comes with it's own kernel, so this proves it is not a kernel problem.
Must be something else, maybe a defective sd card...
Lord Boeffla said:
Cwm touch comes with it's own kernel, so this proves it is not a kernel problem.
Must be something else, maybe a defective sd card...
Click to expand...
Click to collapse
im i mean with de internal storage, i dont have a sd card chip at this momento, when try to get in on the sd into cwm touch and intal zip, say sdcard/0/ seems the kernel put the "/0" to my phone. before flashing the new cwm touch i used a TWR and trying to flash get a error on this kernel. some help?
thx
Hi Andi,
triangle away will work on QS-kk rom?
mahe. said:
Hi Andi,
triangle away will work on QS-kk rom?
Click to expand...
Click to collapse
I never tried it. I am not very sure Triangle Away is compatible with any S3 kk rom.
I would be very cautious to not end up in a brick.
I recall I purposely did not put native TriangleAway support into my 6.x series kernel, to not open up any risk here.
Andi
Lord Boeffla said:
I never tried it. I am not very sure Triangle Away is compatible with any S3 kk rom.
I would be very cautious to not end up in a brick.
I recall I purposely did not put native TriangleAway support into my 6.x series kernel, to not open up any risk here.
Andi
Click to expand...
Click to collapse
Andi,
could you please add above mentioned suggestion in op if not done already? i think this very good piece of information.
Hello.
In NIK60 ROM v.3.0 (4.4.4) I installed Kernel Boeffla 6 Beta 6 with the latest Boeffla Config V2 with Boeffla Config change the values and to reset the phone's settings Governor, the Governor's profile and Internal memory back to their default values pegasusq, standard and CFQ. The other parameters I've changed if maintained.
Where can be the problem? I have proven to Beta 5 and with different versions of Boeffla Config and the result is the same.
Sorry for my bad English.
Thank you
xileftld said:
Hello.
In NIK60 ROM v.3.0 (4.4.4) I installed Kernel Boeffla 6 Beta 6 with the latest Boeffla Config V2 with Boeffla Config change the values and to reset the phone's settings Governor, the Governor's profile and Internal memory back to their default values pegasusq, standard and CFQ. The other parameters I've changed if maintained.
Where can be the problem? I have proven to Beta 5 and with different versions of Boeffla Config and the result is the same.
Sorry for my bad English.
Thank you
Click to expand...
Click to collapse
Must have something to do with the rom.
It seems like
- either you have scripts init.d that overwrite the settings
- you have another app that resets this stuff again
- the rom start takes extremely long (you can give additional startup delay in boeffla-configs settings for a try)
Unfortunately there is no way to do a better diagnose without having your phone in hands.
But... there are reasons why I recommend going on pretty clean roms like JustArchis Port. There these kind of things do not happen.
Andi
Lord Boeffla said:
Must have something to do with the rom.
It seems like
- either you have scripts init.d that overwrite the settings
- you have another app that resets this stuff again
- the rom start takes extremely long (you can give additional startup delay in boeffla-configs settings for a try)
Unfortunately there is no way to do a better diagnose without having your phone in hands.
But... there are reasons why I recommend going on pretty clean roms like JustArchis Port. There these kind of things do not happen.
Andi
Click to expand...
Click to collapse
Just try to Blekota ROM 8.1 and the result is the same, previously had Blekota 8.0 and had no problem.
The install has been fully cleaned, wiping up the internal sd.
Init.d folder only has 2 files and 99SuperSUDaemon 85sqlite
Thank you.
xileftld said:
Just try to Blekota ROM 8.1 and the result is the same, previously had Blekota 8.0 and had no problem.
The install has been fully cleaned, wiping up the internal sd.
Init.d folder only has 2 files and 99SuperSUDaemon 85sqlite
Thank you.
Click to expand...
Click to collapse
I am sorry, but I have no time to try all sort of roms. That's what you users need to do.
I officially do not support the roms you mentioned, only Archiport. So, if all works, fine. But if not, it is like it is.
Especially on the 6.x kernel series I do give only very limited support as it is kinda inofficial and experimental kernel only.
If it worked fine on Blekota 8.0 and not on 8.1 anymore, it is quite obvious something changed which broke some functionality. But as said, I cannot support all roms around as my day only has 24 hours
Thanks for understanding
Andi
Ok, let's start writing in this Boeffla Q&A thread
zRam...for needing multitasking if not working that good...but which values???
I'm on stock 1 device 300mb and 80 swappiness....any other super better setting???
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2
PIRATA! said:
Ok, let's start writing in this Boeffla Q&A thread
zRam...for needing multitasking if not working that good...but which values???
I'm on stock 1 device 300mb....any other super better setting???
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2
Click to expand...
Click to collapse
WHEN (!) I use zram, I use 600 MB total size with 4 devices.
But I almost never use it, I am a lean user, I always close my apps with back button. So zRam is not required for me.
Andi
installed on a fresh V5 coming from a V2, changed nothing in the settings, works flawlessly. Smooth and fast, thanks man!
SHV E210K
I 'm using S3 SHV E210K and my phone don't boot when i flash boeffla kernel.
Do boeffla kernel support my phone?
Lame question maybe. Should I turn the S3 power saving feature on while running a power saving profile or is it useless?
DISCLAIMERYou use this ROM at your own risk.
I will not take any responsability if you crash your device, lose data or whatever.As we all know that our phone Xperia SP has a weird problem of less ram and is slow for multitasking , me too like you all kept trying a lot of roms, whether stock or AOSP based but couldn't find a solution.
Well here i present to you guys the Final Solution ROM.
Most of the roms available are deodexed for customization but deodex leads to lag in interface and usage of more ram.
This ROM has odexed framework as well as most important system apps.
Let us face the truth for a minute, all the Z3 ports available right now slow down the phone and eat more ram ,
If we can't have a smooth interface then why should we use it on a phone which has only 1 gb memory.
This rom includes all the customisations and apps you would actually need, after a lot of research and hard work, i was able to find the core of the problem ie deodexing and and all the app eating most of the ram.
Features-
Odexed
Zipaligned
Heavily debloated
Pre Rooted
Advanced sound panel mod
20 NEW THEMES BY ME AND AND MY FRIEND @ska [GREAT GUY]
Busybox
Extra Sony apps like sketch , tasks , notes etc.
Taskiller
Xposed , gem xperia , xperia
William's Kernel
Most importantly removed update centre as it constantly runs in background.
We are not going have any updates and sony app updates can be easily found on google
Just install them as normal apk.
Also removed location based WiFi
Warning- Now you can no longer apply mods to system as the ROM had been odexed.
I HAVE NOT REMOVED LIVE WALLPAPERS AND ANY WIDGETS BUT STIRRINGLY RECCOMEND NOT TO USE THEM!!
Flashing Instructions-
Go to recovery
Wipe data, cache, dalvik cache and system
flash rom
Reboot
POST INSTALLATION STEPS
(IMPORTANT FOR GREAT EXPERIENCE)
After rom reboot, start using after 5 mins
Finish setup
Go to play store
Download kernel auditor
Open and set max frequency 1800 mhz and governer to Interactive
set io scheduler to ROW
Disable mp decision in CPU Hotplug
Change minfree values to-
5 , 16 , 40, 80 , 90 , 150
Install xposed framework
Download more modules and enable
Set up your needs and then
Also enable xperia and gem.
Finally reboot the device
INSTALLING THIS ROM AND FOLLOWING ALL THESE STEPS WILL GIVE YOU THE BEST EXPERIENCE OF THIS DEVICE.
Theme's thread by @ska
http://forum.xda-developers.com/showthread.php?t=
More themes by me-
http://forum.xda-developers.com/showthread.php?t=2767488
William's kernel thread by @pec0ra
http://forum.xda-developers.com/showthread.php?t=2750392
Sources-
https://github.com/pec0ra/williams
CREDITS- @dipesh1502 (my mentor) @pec0ra @ska
My parents @Killawave , used his ROM as base
Download-
https://drive.google.com/file/d/0B4I29CuguZClUzE4QVZidjBtSUU/view?usp=sharing
NOTE- THEMES ONLY WORK WHEN YOU ENABLE SUPERUSER MODE IN XPERIA XPOSED
For Increasing volume, either use faux sound control app (recommended) or increase from sound control in Kernel Auditor.
It's stable.
Guys i have put a lot of hard work in this and this is my first ROM. Just use it to understand it, is the best. Just don't forget to press that thanks button
For AOSP users-
http://forum.xda-developers.com/xperia-sp/development/final-solution-rom-aosp-t3064859
When this build uploading?
Sent by Xperia SP using PA + DoomKernel v13
FOR LATEST MOVIES AND OTHER SONY APPS-
http://forum.xda-developers.com/xperia-u/themes-apps/app-sony-album-6-1-0-14-ui-updated-22-t2378816
Please, any test ?? i need an Antutu Benchmark
Screenshots-
Morgane3D said:
Please, any test ?? i need an Antutu Benchmark
Click to expand...
Click to collapse
This ROM included includes william's kernel which is also overclocked so the benchmark will definitely be great.
But the question here is not about benchmarks but the actual problems of our device which have been fixed with this rom. Read the OP fully please (I know it's long though)
what about sound? ,atleast give us screenshot
Every antutu benchmark my phone freeze and reboot when i had william kernel so benchmark will not be great -_-
Your ROM is based on .201?
Will DoomKernel work?
Sent by Xperia SP using PA + DoomKernel v13
So much stuff missing...
Basic LBL or UBL?
Android 4.1? 4.2? 4.3? 4.4? 5.0? 5.1?
Is it a Sony based ROM?
Sam spancer said:
what about sound? ,atleast give us screenshot
Click to expand...
Click to collapse
Uploading screenshots in 2 hours. The ROM looks the same man, the difference is the smoothness........
bobslesbricoleurs said:
Every antutu benchmark my phone freeze and reboot when i had william kernel so benchmark will not be great -_-
Your ROM is based on .201?
Will DoomKernel work?
Sent by Xperia SP using PA + DoomKernel v13
Click to expand...
Click to collapse
No it is based on .207
TheAvengingTITAN said:
So much stuff missing...
Basic LBL or UBL?
Android 4.1? 4.2? 4.3? 4.4? 5.0? 5.1?
Is it a Sony based ROM?
Click to expand...
Click to collapse
New to this brother, updating OP......
very thanks to tgis rom and ur effort,,,, js want to ask is tge sound low in this rom as stock or u tweaked to louder sound
Sam spancer said:
very thanks to tgis rom and ur effort,,,, js want to ask is tge sound low in this rom as stock or u tweaked to louder sound
Click to expand...
Click to collapse
I have included Williams kernel which includes kernel level sound control. You just gotta download the faux sound control app
New build up! Bugs fixed , Added 20 new themes
any solution to touchscreen bug fix?
Sam spancer said:
any solution to touchscreen bug fix?
Click to expand...
Click to collapse
Where kind of bug you are having man? Explain in detail
well whatever rom i use ihave a bug while touch on screen multitouch issue like playing dead trigger on touch works bt other nt in the same time
i only hv this issue with custom roms
Sam spancer said:
well whatever rom i use ihave a bug while touch on screen multitouch issue like playing dead trigger on touch works bt other nt in the same time
i only hv this issue with custom roms
Click to expand...
Click to collapse
I can totally assure you that this rom doesn't have it, i have been testing it for two days now
It works on .207 LB?
Hello, please any can tell me which rom ( JB, KK, LP, MM or N ) is great to games?
i think stock based rom are the best for this device, but i dont know which i can use..
Regards
NeatROM,Chameleon,Omega
i actually use lite version this http://www.htcmania.com/showthread.php?t=791629
tweak on build.prop: fast charge (2h), speed, SD card speed read,graphics,video, speed browser data
have GTA san andreas lite mali 200mb, aralon sword and shadow, ravensword shadowlands, dead space, resident evil 4 mobile, Avabel Online, battle bears gold all plays without overhead phone with Apolo 1.14 regular twrp and xposed modules SD on Obb,greenify,power nap
Abels2 said:
NeatROM,Chameleon,Omega
i actually use lite version this http://www.htcmania.com/showthread.php?t=791629
tweak on build.prop: fast charge (2h), speed, SD card speed read,graphics,video, speed browser data
have GTA san andreas lite mali 200mb, aralon sword and shadow, ravensword shadowlands, dead space, resident evil 4 mobile, Avabel Online, battle bears gold all plays without overhead phone with Apolo 1.14 regular twrp and xposed modules SD on Obb,greenify,power nap
Click to expand...
Click to collapse
Thanks i will try, only two things
1) is necessary that i have instaled the Official LPH rom?? right now i have XWLSN
2) you say that you have Apolo 1.14 Regular but the rom have 4.13 Regular, this is another kernel?
Regards.
braniels2 said:
Thanks i will try, only two things
1) is necessary that i have instaled the Official LPH rom?? right now i have XWLSN
2) you say that you have Apolo 1.14 Regular but the rom have 4.13 Regular, this is another kernel?
Regards.
Click to expand...
Click to collapse
its not necessary LPH, you can make correct wipes and install infinity
yes, you can download 1.14 or latest gb kernel from:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6
my config on Apolo Configurator noop, Slp, values apolo regular, disable BLN, fast charge.
my modem: https://forum.xda-developers.com/galaxy-s2/general/overheating-fix-samsung-galaxy-s2-fix-t1656005
disable fast dormancy (call *#9900# and disable it, its consume 20% battery and not support all company services.)
disable auto-rotation (use the gyroscope, you can rotate manual the videos,camera...)
disable auto-sinc (this process is active around 1 min checking new contacts, locations, etc ... you can manually synchronize it on settings-accounts.)
Use dark themes and dark wallpapers (actually i dont use wallpaper all black.)
disable animations windows or set duration x1,5
for games try some config from chainfire 3D
Abels2 said:
its not necessary LPH, you can make correct wipes and install infinity
yes, you can download 1.14 or latest gb kernel from:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6
my config on Apolo Configurator noop, Slp, values apolo regular, disable BLN, fast charge.
my modem: https://forum.xda-developers.com/galaxy-s2/general/overheating-fix-samsung-galaxy-s2-fix-t1656005
disable fast dormancy (call *#9900# and disable it, its consume 20% battery and not support all company services.)
disable auto-rotation (use the gyroscope, you can rotate manual the videos,camera...)
disable auto-sinc (this process is active around 1 min checking new contacts, locations, etc ... you can manually synchronize it on settings-accounts.)
Use dark themes and dark wallpapers (actually i dont use wallpaper all black.)
disable animations windows or set duration x1,5
for games try some config from chainfire 3D
Click to expand...
Click to collapse
sorry but i only can see 4.x versions of kernel no 1.14
braniels2 said:
sorry but i only can see 4.x versions of kernel no 1.14
Click to expand...
Click to collapse
4.x and old versions chose 1.14 regular twrp
Abels2 said:
4.x and old versions chose 1.14 regular twrp
Click to expand...
Click to collapse
Sorry but nop, i only see 4x versions, but which is the difference bettwen the version of apollo in the rom?
see the attach.
Regards
braniels2 said:
Sorry but nop, i only see 4x versions, but which is the difference bettwen the version of apollo in the rom?
see the attach.
Regards
Click to expand...
Click to collapse
all versions for different brach, 4.x base 4.1.2 5.x for LP 7.x for KK and 6.x for 4.3
i install this 1.14 because not focus on OC latest for 4.x fix governor zzmove
you can see test with different kernels on SAMMY roms here
https://forum.xda-developers.com/galaxy-s2/general/18-apr-2014-kernel-battery-tests-t1682765
link 4.14 regular twrp https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
Abels2 said:
all versions for different brach, 4.x base 4.1.2 5.x for LP 7.x for KK and 6.x for 4.3
i install this 1.14 because not focus on OC latest for 4.x fix governor zzmove
you can see test with different kernels on SAMMY roms here
https://forum.xda-developers.com/galaxy-s2/general/18-apr-2014-kernel-battery-tests-t1682765
link 4.14 regular twrp https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
Click to expand...
Click to collapse
Thank, you know how to show or see the status bar while i´m playing without getting out??
braniels2 said:
Thank, you know how to show or see the status bar while i´m playing without getting out??
Click to expand...
Click to collapse
you can see status bar on 4.1.2 you must do it several times one of the things because it does not work
other way get replace touchwiz launcher (nova launcher,dark themes,...)
Abels2 said:
you can see status bar on 4.1.2 you must do it several times one of the things because it does not work
other way get replace touchwiz launcher (nova launcher,dark themes,...)
Click to expand...
Click to collapse
thanks, right now I am using the app smart status bar.
How is your performance when playing avabal? because normally I only have 250 mb free ram available.
Regards.
braniels2 said:
thanks, right now I am using the app smart status bar.
How is your performance when playing avabal? because normally I only have 250 mb free ram available.
Regards.
Click to expand...
Click to collapse
All on min and just see characters on party
changes on play avabel online Apolo configurator gover: zzmove and nop
go to developer options and in applications, activate the option to destroy activity when you leave it and limit open applications x2
Abels2 said:
All on min and just see characters on party
changes on play avabel online Apolo configurator gover: zzmove and nop
go to developer options and in applications, activate the option to destroy activity when you leave it and limit open applications x2
Click to expand...
Click to collapse
Thanks, please can you tell me about your experience with this rom Ehndroix V 14.11.15?
braniels2 said:
Thanks, please can you tell me about your experience with this rom Ehndroix V 14.11.15?
Click to expand...
Click to collapse
would be for me the best rom (4.4) for i9100 has a good performance in a matter of battery, a very well optimized launcher is one of my options when I'm not using the stock based roms or the one you already know DU 10.6, I must say that many roms kitkat promise a stable performance (pound rom, RR kitkat, Android Paranoid, NeatAOKP, spiritROM, DU 4.4, nameless, mokee, pac-man, MiUi kk, bifkat, rom gummy, cyanfox, beanstalk, carbon, omni, slimbean)
I also followed Saber's advice to use Slimsaber build greekdragon together with his kernel but at the time of using it I caused bootloops and I gave up with it
all of them when I was not using the phone were downloaded enough to the point of losing 40% in any of them in a night without using it, this ehndroix together with dorimanX kernel gave me a good consumption at night and a good performance during I was using it to play or watch a YouTube video, I do not recommend LP roms at all, even now and then I try some MM rom
but certainly those based on stock are the best since always a user who has still the S2 his problem will be the autonomy of the battery
it is good that they are striving to get the final versions of Nougat and are currently working for a stable 8.1 but not to make it very large I would recommend you stay in some stock or MM adding the settings that I previously put on custom roms cant disable fast dormancy now download app fast dormancy for i9300 and some modules xposed (greenify, SD on OBB, powernap, ...) always use the interface and add a dark theme etcc ...
PD:if some things did not make much sense forgive me, I'm using the google translator xDD
Abels2 said:
would be for me the best rom (4.4) for i9100 has a good performance in a matter of battery, a very well optimized launcher is one of my options when I'm not using the stock based roms or the one you already know DU 10.6, I must say that many roms kitkat promise a stable performance (pound rom, RR kitkat, Android Paranoid, NeatAOKP, spiritROM, DU 4.4, nameless, mokee, pac-man, MiUi kk, bifkat, rom gummy, cyanfox, beanstalk, carbon, omni, slimbean)
I also followed Saber's advice to use Slimsaber build greekdragon together with his kernel but at the time of using it I caused bootloops and I gave up with it
all of them when I was not using the phone were downloaded enough to the point of losing 40% in any of them in a night without using it, this ehndroix together with dorimanX kernel gave me a good consumption at night and a good performance during I was using it to play or watch a YouTube video, I do not recommend LP roms at all, even now and then I try some MM rom
but certainly those based on stock are the best since always a user who has still the S2 his problem will be the autonomy of the battery
it is good that they are striving to get the final versions of Nougat and are currently working for a stable 8.1 but not to make it very large I would recommend you stay in some stock or MM adding the settings that I previously put on custom roms cant disable fast dormancy now download app fast dormancy for i9300 and some modules xposed (greenify, SD on OBB, powernap, ...) always use the interface and add a dark theme etcc ...
PD:if some things did not make much sense forgive me, I'm using the google translator xDD
Click to expand...
Click to collapse
Thanks, i like this stock based rom (Infinity rom) thanks to you xD... have nice battery life and performance but i wanna see if with KK i have more performance with Avabel and fix the thing with status bar.
What version of dorimanx do you use with Ehndroix and which configuration for normal and game?
P.D: relax, i´m using google translate too xD, my mother language is Spanish... you are a nice person thanks for answer.
braniels2 said:
Thanks, i like this stock based rom (Infinity rom) thanks to you xD... have nice battery life and performance but i wanna see if with KK i have more performance with Avabel and fix the thing with status bar.
What version of dorimanx do you use with Ehndroix and which configuration for normal and game?
P.D: relax, i´m using google translate too xD, my mother language is Spanish... you are a nice person thanks for answer.
Click to expand...
Click to collapse
this version https://github.com/gsstudios/Dorimanx-SG2-I9100-Kernel/releases/tag/10.50v008
and another thing good for battery
https://forum.xda-developers.com/galaxy-s2/themes-apps/snapdragon-battery-gurulast-v1-5-t2247116