CRT Animation causes screen to awake again if done on lockscreen - Galaxy S II Q&A, Help & Troubleshooting

hi guys,
I have Neatrom LSN(4.6.1) installed with the LSN Crt off animation mod. This problem occures with the original philz kernel as well as the newest dorimanx kernel.
Whenever my phone is on its lockscreen(pattern lock) and i push the powerbutton, the CRT animation activestes. The problem is that the screen turns on again after it turns off from the CRT animation. Does anyone know what causes this?
Also: could anyone explain to me what the "xxxx onset delay" in STweaks does in relation to the CRT Animation? I dont really understand it's description.
I also got SOD on the dorimanx kernel in an app after I pushed the powerbutton a second time without waiting for the CRT animation to finish. Is that common knowledge or is there something I can do to fix this(except not to do it and to let it play out).?
Thanks a lot

have to push Vibrate two times to activate it(the first time it jumps back to ringer)
--

I wish I could post this into the Neatrom thread but I need to get 10 Posts first -.-

Philz Kernel doesn't support crt off properly, if ur going to use Dorimanx then u need to edit a setting in stweaks, called something like fb suspense delay to 100ms and it'll work fine.
Or u could try a different kernel that supports it by default like apolo, speedmod or jeboo
Sent from my GT-I9100 using Tapatalk 2

Hayth said:
Philz Kernel doesn't support crt off properly, if ur going to use Dorimanx then u need to edit a setting in stweaks, called something like fb suspense delay to 100ms and it'll work fine.
Or u could try a different kernel that supports it by default like apolo, speedmod or jeboo
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I use Dorimanx and I did set it to 100ms and after that to try another setting,to 150 ms
Sadly that doenst change the fact that the screen turns back on after I try to turn the display off on the lockscreen

Same problem here...
I'm in stock Samsung LSN (deodexed), with Apolo kernel (it's a great kernel, btw).
When I push the power button while I'm on lockscreen, sometimes the CRT animation works fine, sometimes doesn't; and when it works fine, sometimes the screen turns on again in less than 1 second...
It's annoying...
I'm using this CRT-Off mod: http://d-h.st/YoW
Any idea of how to fix this issue?

Nobody knows?

Same problem here!
I'm in stock Samsung LSN (deodexed), with jeboo kernel
i used this method to get crt-off
Mirko ddd

Same problem here!
I'm in LSN (deodexed), with apolo kernel

Hi again.
I think this issue is kernel related.
I was on Apolo kernel v4.5 and I was having this issue. But I installed Apolo v4.9 two days ago, and I haven't had this issue anymore, so I think that the problem has been solved just with the kernel change.
Can anybody try Apolo kernel v4.9 and confirm that the issue is gone?

Thanks you very much for having find my big problem.
Since the dorimanx v9.34 the CRT is buggy totally. I've the same bug than you !
Screen on / Screen off, change the cpu speed governor and consome a lots of ressources when it occures 300X in a night
SO i just turned off the CRT, and all is very FINE.
I'm on SlimBean 4.2.2 Sabermod with dorimanx 9.38 on i9100 device.
MANY THANKS again :laugh:

thebigtross said:
Thanks you very much for having find my big problem.
Since the dorimanx v9.34 the CRT is buggy totally. I've the same bug than you !
Screen on / Screen off, change the cpu speed governor and consome a lots of ressources when it occures 300X in a night
SO i just turned off the CRT, and all is very FINE.
I'm on SlimBean 4.2.2 Sabermod with dorimanx 9.38 on i9100 device.
MANY THANKS again :laugh:
Click to expand...
Click to collapse
I'm glad to hear that, mate, but I hadn't to disable CRT-Off effect to solve the problem. All I did is to change the Apolo kernel, from v4.5 to v4.9, and now CRT-Off effect works flawlessly everytime.
I used Dorimanx kernel long time ago, but imho, Apolo kernel is more battery friendly and works very well for me. Only one thing: note that Apolo kernel works only in stock based roms...

thx for help

Related

XWLPG tweaks needed.

Greetings brothers,
I recently made the transition from resurrection with the siyah kernel to the much simpler pure ics with the xwlpg kernel. But I would be lying if I said I don't miss the extweaks app. Sadly its only siyah compatible. I would like to have the BLN feature and the fast usb charging (6500 instead of 4500 mA). Is there any way I can incorporate those 2 features in my awesome new rom?
omarriachi said:
Greetings brothers,
I recently made the transition from resurrection with the siyah kernel to the much simpler pure ics with the xwlpg kernel. But I would be lying if I said I don't miss the extweaks app. Sadly its only siyah compatible. I would like to have the BLN feature and the fast usb charging (6500 instead of 4500 mA). Is there any way I can incorporate those 2 features in my awesome new rom?
Click to expand...
Click to collapse
Just flash the latest version of Siyah Kernel via CWM Recovery or Odin. It doesn't matter what ROM you have, you can change the kernel.
Chris.

[Q] Comparison of kernels!!

I want to flash a custom ROM to My S2 ...What i dont get is whic kernal to flash .Can someone provide a comparison between Fluxi ICS Kernel, Siyah ICS Kernel, CM ICS Kernel, Dorimanx ICS Kernel & Dark Knight ICS Kernel?? What is the Difference between all of these??
Thanks in Advance.
Read the first page of the thread devoted to each kernel. The specific features will normally be in the first post on that page. There is no chart or thread or whatever listing features of all the kernels on here, there's too many of them for starters & kernels change all the time.
I'm on siyah kernel and it's awesome. I reccomend it... I tried time ago most of the kernel, xxkernel, siyah, dorimanx( just yesterday) but the most stable and usable for me ( I'm on cyano) is the siyah for now... thoravukk kernel at the time I try it wasn't bad but the recovery won't work well... dorimanx comprised with the siyah is really similar the only thing that force me to switch again to siyah was some bug of the dorimanx that the dev will fix.. the dark knight kernel wasn't bad also... but it doesn't have a app to tune the kernel ( like ex tweak).. if you try the dorimanx remember to download extweaks and set the governor of deep sleep ( both) on pesasusq, if you gonna try some other kernel like thoravukk or xxkernel please post your impression, I'm always looking for the ultimate kernel for me right now for stability and feature is the siyah... dunno if the battery life is optimized better on other kernel... I have not bad battery life with siyah...
Inviato dal mio GT-I9100 con Tapatalk 2

[Q][Help]How to disable BLN??

Hey guys
I've following problem.
A while ago i've accidentally bricked my gorilla glass on my s2...but amoled and all is working fine though:highfive:....than i bought only gorilla glass part...i wanted to change it myself....but....when i ripped my s2 apart and started detaching whole screen from housing.....the LED's part got broken....so now my led's are gone....it's not such a big deal as i'm using button saviour from playstore.....BUT.....What i'd like to know is: Is there any way to disable BLN from within build.prop file?...because if i flash any other rom and if i make a full data wipe from cwm my s2 catches in a bootloop because BLN is enabled by default....so....is there any way to disable BLN?
Any help is highly appreciated,
Thanks in advance
>>>>>>>>>>>>>>>>>>>>>>>>>
Sent from my SGS-II powered by ~CyMod~10~&~DoRimanX v 7.0 kernel
<<<<<<<<<<<<<<<<<<<<<<<<<
That's hardware problem, so even if you leave BLN enabled you won't have any bootloops...
przemcio510 said:
That's hardware problem, so even if you leave BLN enabled you won't have any bootloops...
Click to expand...
Click to collapse
well...if that would be like u said...i would be happy...but it's not...i've found out that if i delete galaxy s2 settings before i flash a rom itcs ok...but with latest JB/CM 10/10.1 builds this method became useless...still searching for solution before orderjng new touch keys...anyone?
Sent fom my S-II running CM-10 by mcm811 powered with DorimanX kernel 7.35

Googy Max Kernel Screen Issue!

Hi im using crDroid 10 and Devil Kernel this kernel supports 4.3 but there is vibration bug phone cant vibrate with this kernel when i install googy max everthing is awesome but screen colors is changing how can i keep it stock dynamic mod i like stock dynamic color but when i install this kernel i cant choose and screen mod in cm10.2 and what i need to do? thanks for help :good:
berksems said:
Hi im using crDroid 10 and Devil Kernel this kernel supports 4.3 but there is vibration bug phone cant vibrate with this kernel when i install googy max everthing is awesome but screen colors is changing how can i keep it stock dynamic mod i like stock dynamic color but when i install this kernel i cant choose and screen mod in cm10.2 and what i need to do? thanks for help :good:
Click to expand...
Click to collapse
Please search in the googy max thread, there are most of the basic questions already answered http://forum.xda-developers.com/showthread.php?t=2270158
but in short: open stweaks (if you don't have it download it from play store). Go to the "MDNIE" tab and disable "register hook" and "master sequence". this will make the colors, like they would be on stock
BTW if you mean the screen modes, they were removed in one of the past cm10.2 nightlies

CM 11 BLN won't work

I came from CM 10.2.3 to CM11 Pound Rom after a full wipe with nuke. Everything works fine, without the BLN. On CM 10.2.3 it worked fine. It was activated in STweaks and because it didn't work, I installed Apollo Kernel but with that it does not work, too.
The problem is that the "Test BLN" works, but if a SMS or other notification comes in, it doesn't work.
Does anybody has an Idea?
The Rom came from here:
http://forum.xda-developers.com/showthread.php?t=2535113
The problem was caused by the rom, the infected build works great with gustavo kernel:good:
cubflyer said:
The problem was caused by the rom, the infected build works great with gustavo kernel:good:
Click to expand...
Click to collapse
Can you tell me precisely what you did, because I have tried OmniROM, infected´s CM11 with both Gustavo and Apolo and none work =/. Test BLN works *sometimes*, but it never lights up on a notification.
Thank you VERY much I really need the BLN feature, it was the reason why i rooted my phone in the first place.
sreckoxda said:
Can you tell me precisely what you did, because I have tried OmniROM, infected´s CM11 with both Gustavo and Apolo and none work =/. Test BLN works *sometimes*, but it never lights up on a notification.
Thank you VERY much I really need the BLN feature, it was the reason why i rooted my phone in the first place.
Click to expand...
Click to collapse
I looked around for another rom which has the same futures to test bln with it. So I found this rom:
[ROM][KK][4.4.2][LINARO/SABERMOD] CyanogenMod 11
With this ROM and Gustavo Kernel BLN is working and it saves more battery. Since then I'm using this ROM as daily driver, works great.
:good:
Edit: Oh sorry, you have already tested the infected builds :/
Did BLN work with cm 10.1.3? Is it activated in Stweaks? How high is your Key Backlight Brightness?
cubflyer said:
I looked around for another rom which has the same futures to test bln with it. So I found this rom:
[ROM][KK][4.4.2][LINARO/SABERMOD] CyanogenMod 11
With this ROM and Gustavo Kernel BLN is working and it saves more battery. Since then I'm using this ROM as daily driver, works great.
:good:
Edit: Oh sorry, you have already tested the infected builds :/
Did BLN work with cm 10.1.3? Is it activated in Stweaks? How high is your Key Backlight Brightness?
Click to expand...
Click to collapse
I never had 10.1.3, had NeatROM before and BLN worked flawlessly.
I am now running the latest build [ROM][KK][4.4.2][LINARO/SABERMOD] CyanogenMod 11 CM 11 20141205 with the latest build of the Gustavo's kernel (TWRP) - 05/01 also.
Test BLN now works every time, I can modify BLN voltages and see the result. But it *still doesnt light up* on notification . What should I try next? Reflashing, some better way of wiping?
I have tried reflashing, different kernels but they all exhibit the same behaviour - Test BLN works (sometimes or every time) but the LEDs dont light up on notification!
I tried OmniROM and infected's CM11. Gustavos kernel, Apolo, DorimanX... LED voltage control works, LED on touch works as well... BLN and BLNWW dont work.
Does anyone have an idea what might be causing this problem? I had BLN running perfectly normal on NeatROM with Apolo kernel.
The KitKat ROMs are really great and I would love to have them as my daily driver but the problem is that I really, really need BLN and got used to it (actually spoiled by it is a better word).
I have managed to get it to work. I wiped everything with GS2RomNuke, reflashed ROM and kernel. Everything works now!
sreckoxda said:
I have managed to get it to work. I wiped everything with GS2RomNuke, reflashed ROM and kernel. Everything works now!
Click to expand...
Click to collapse
Great! :victory:
I forgot to mention it but I have wiped everything with this script, too
i had this problem. but i solved it select NO RESTORE apps from Google Play when i installed the rom. (no ask me why)

Categories

Resources