Hello everyone
I have recently bought the Navon Raptor 7 and now I'm having some issues.
The internal storage is a bit too small for the apps I want to install and I would like to make the SD-card the default install location.
I know there's ways to do it though ADB, but I just can't get any of the drivers for the rk3066 working.
Most of them say that they couldn't find the correct software for my device or that the driver was found but that there was an error during installation.
My operating system is Windows 8 64-bit
Thanks in advance
nobody here?
So there is nobody knowing something about that?
Related
TL;DR: Can I install Linux on the Venue 8 7000?
Hello, I am new to this forum, so please correct me, if I do anything wrong. I would like to buy the Venue 8 7000, but Android is not enough for me, as I'd like to develop desktop apps. Installing Linux should not be that hard, if it is possible to choose the boot device, which could be blocked. I mean, do Tablets work as normal Computers? Do I just need to hit F8 or something like that? Also what Architechture is the Processor? It is Intel, so I'd suspect i686 or x86_x64. Would I need to install the OS on the Tablet's internal memory? If so, do apps themselves need internal memory? I have never owned a Tablet before, so I don't know. If all of this doesn't work, could you recommend me another small Tablet? I read somewhere on here, that someone got it working on an nVidia SHIELD, so this shouldn't be too much different.
Thanks!
Installing android virtual device (AVD) with Intel HAXM support
Installing HAXM via android studio sdk manager gives no error.. but in AVD Manager, an error displayed - "/dev/kvm is not found" and hence doesn't allow me to run AVD
Installing HAXM(6.1.2) by downloading from intel official website gives me an error "Failed to configure driver: unknown error. Failed to open driver" which I tried to resolve using this solution given on intel blog
But still not working for me as comments shows for few people it is not working too..
Now, Clicking on green run button gives me same error in addition it displays something more related to "enable Intel VT-x from bios"
Now, in my computer's bios settings.. there is no VT-x but just "Intel VT" feature that I enabled.. but still no difference.. same error message.. I tried uninstalling and reinstalling android studio and AVD.. still no solution
My PC config is :
4gb ram ddr3
Intel i3 550 3.20 ghz
BIOS version TCIBX10H.86A.0037 (not updated - latest firmware is TCIBX10H.86A.0048)
Intel hd graphics
500gb hdd
Windows 7 32bit
PS:
1. Hyper-v is not installed on my computer (may be not supported or Windows need to be installed, I never tried to install it myself)
2. There is no virtual box installed either
3. Sorry for bad english and I'm new to android app development also
One of your issues is that you are running a 32 bit system. Android devices tools require a 64 bit computer.
From what you have said about the missing bios option again tells me your pc is not compatible on a basic level. Not a whole lot you can do. Other then get a new pc to work with Android tools.
zelendel said:
One of your issues is that you are running a 32 bit system. Android devices tools require a 64 bit computer.
From what you have said about the missing bios option again tells me your pc is not compatible on a basic level. Not a whole lot you can do. Other then get a new pc to work with Android tools.
Click to expand...
Click to collapse
Thank you for your reply.
I have another PC of my colleague, but I don't know exact configuration of it. Still I came to know that it has 64-bit Windows 7 installed and some high end Nvedia graphics card installed. I'll try using it and let you know.
zelendel said:
One of your issues is that you are running a 32 bit system. Android devices tools require a 64 bit computer.
From what you have said about the missing bios option again tells me your pc is not compatible on a basic level. Not a whole lot you can do. Other then get a new pc to work with Android tools.
Click to expand...
Click to collapse
prattkool said:
Thank you for your reply.
I have another PC of my colleague, but I don't know exact configuration of it. Still I came to know that it has 64-bit Windows 7 installed and some high end Nvedia graphics card installed. I'll try using it and let you know.
Click to expand...
Click to collapse
Problem continues even on other PC and I could never find why the error continued even if I got VT - x supported and enabled on both the PCs now.. (I checked using 'Intel® Processor Identification Utility' and 'securable.exe') finally i had to move on to 3rd party emulators which run on VirtualBox (like Genymotion).
Hello,
I just got as a present an Acer One S1003 and it's on Windows 10 and I don't like it. Cannot return it (don't ask why pls), but I managed to install Android 7.0 on it. Now the issue I have is that it doesn't find the driver for Wifi and G Sensor. Everything else works, sound and all, but I can't enable Wifi or Autorotate.
Tried to find the drivers on Google but I could only find the Windows 10 ones.
Please help me to find some drivers or let me know if I need to install a different version of Android.
Thank you,
Daniel
on android 8.1 and 9 wifi is working but don't work g sensor and i can only run android x86 8.1 with no hardware acceleration. Can't normal start android. I don't know what is with x64 because this s.h.i.t of tablet supports only UEFI 32 bit, NO 64 bit and NO legacy mode, but processor is 64 bit and have 4 gb memory. Someone in acer is very very creative processor x64 4 GB memory and only support UEFI 32 bit my mind can't understand it :/
Hi folks, I'm trying to use Mi BOX 3 with dell touchscreen monitor P2418HT.
On windows it's necessary a driver installation.
Anyone have an ideia how to make it possible to reconize it on Android?
I also installed Android on a notebook, (normal android, not the android tv), and also does not work....
Maybe write a small driver?
Thanks in advance!
Conclusion: does not work with linux and android.
This dell is not compatible. Even on windows is necessary drivers.
Need to choose other brand.
Same problem as the original poster, anyone have an idea?
Hello there
I just tried installing PrimeOS for the first time and I get an error message saying Disk service raised an external error Code: 2147024809
I'd like a solution to this problem please if one of the PrimeOS team can help
Another problem I got is after that error a part of my C/ partition where the prime was going to be installed is taken (the installation requires to shrink a part of the partition and it does so without even installing the system but the space is taken anyway) so far around 30 gigabytes are lost and i would like to know how to undo that.
Help would be appreciated
SeekN7eak said:
Hello there
I just tried installing PrimeOS for the first time and I get an error message saying Disk service raised an external error Code: 2147024809
I'd like a solution to this problem please if one of the PrimeOS team can help
Another problem I got is after that error a part of my C/ partition where the prime was going to be installed is taken (the installation requires to shrink a part of the partition and it does so without even installing the system but the space is taken anyway) so far around 30 gigabytes are lost and i would like to know how to undo that.
Help would be appreciated
Click to expand...
Click to collapse
i got that too install it from ISO better and have dual boot with you another OS ,use rufus to make ur USB
Missing os
Hope I'm on the correct thread.
Acer V5 122P came with Windows 8, updated to 8.1, 10, then CloudReady, PrimeOS ran but CloudReady took over.
Removing partitions with GParted I went too far and now have Missing OS.
PrimeOS is still on drive but won't run.
Windows 8.1 installer says partition is GPT.
I've made a real mess and have no idea how to get PrimeOS working and use my Acer.
Please can somebody help me.
@newbiecaem
To make your Acer laptop useable again do a clean Windows 10 installation.
How to install PrimeOS Android x86 on Windows PC / laptop is explained here.
Success
@jwoegerbauer
Many thanks. I had always wondered what a "clean install" was. Windows 10 now smoothly installed.
Hopefully now to dual boot with PrimeOS.
newbiecaem;83564405 [user=1890170 said:
@jwoegerbauer[/user]
Hopefully now to dual boot with PrimeOS.
Click to expand...
Click to collapse
@jwoegerbauer No success with installing primeos.
If I change boot to Legacy, I get missing OS.
If I leave it as UEFI nothing happens from the USB, it's not even listed in the boot order.
I tried the Windows installer, it didn't work either.
Are you able to help again?
@newbiecaem
To make PrimeOS installation an easy then if you're on Windows UEFI 64-bit use the PrimeOS Installer EXE, and not its image file ISO.
Also make sure Secure Boot is disabled in Windows UEFI.
PrimeOS PrimeSwitcher Not Switching
jwoegerbauer said:
@newbiecaem
To make PrimeOS installation an easy then if you're on Windows UEFI 64-bit use the PrimeOS Installer EXE, and not its image file ISO.
Also make sure Secure Boot is disabled in Windows UEFI.
Click to expand...
Click to collapse
I tried both standard and Classic. In each case PrimeSwitcher just brought me back to Windows 10.
I guess I'll just have to live with slo..o..o..w Windows 10.
Hi All,
The installation of PrimeOS 0.4.5 was easy. It takes about 15min. on my Lenovo T410 laptop
My issues coming after that:
1.) See almost all WiFi around me except my Samsung S20 Plus 5G Portable WiFi. why?
I see all WiFi routers around me, but none of my WiFi hotspots (Samsung S20+ / Huawei P10 and P9).
I tried with my wife Xiaomi Note M10 phone and working...
Any idea why only MI 10 working?
I tried all frequency combination (2.4 or 5)
2.) Almost all my favorites games are not running. Application closed/crashed during loading. (e.g: Guild Of Heroes, State Of Survival , Asphalt 9, CSR2)
Any idea why?
Istvan