Related
jump here: http://forum.xda-developers.com/showthread.php?t=347451
How to build your own rom: first download the kitchen, then replace the boot.rgu in XIP folder with the one abusalza attached in his thread. Then put the diskimage.nb0 in to rom folder (you can use jiggs'). Then double click dumpFiles.cmd, wait.....-> there will be 2 folder OEM&SYS created. Change things in those two, when finished-> double click BuildOS.cmd-> start-> wait........->close buidOS->wait the cmd window finishes, there'll be a diskimage created in Flash foder, copy and overwrite it to folder "ATOMWM607WWE6PP". And voila: you've got new rom
Okay, i'm trying to download it, would you upload to somewhere else else? mediafire seems have some trouble with my internet connection,. would you tell us more detail about, step by step installation, major and minor bugs, etc?what about you? have you tried your own ROM? does it works perfectly?
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
^^Downloading , will upload soon in about 30 - 45 minutes
Here's the link CLICK ME
medkid said:
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
Click to expand...
Click to collapse
do we need to enter to bootloader mode??
is it safe upgrading without entering to bootloader mode??
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
udayrulz said:
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
Click to expand...
Click to collapse
have you flash your atom with this rom?
how is it? succesfull?
is it faster mate?
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
udayrulz said:
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
Click to expand...
Click to collapse
thanks mate, i'll borrow my friend computer which use a faster broadband connection, might this help me to download the file,.
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
http://rapidshare.com/files/67638815/ATOMWM607WWE6PP.rar
udayrulz said:
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
Click to expand...
Click to collapse
great,. thanks uday,.
waiting for the link then,.
^^Link added to previous post
nice, its downloaded,.
well,. so many files,.
its a ROM Upgrade i've never done before,.
okay will try it,.
- Extract
- Connect Device by entering bootloader mode
- Run Software Update Utility
- Wait
was that right????
^^yes^^ , i am flashing it too now
Just finished with it , works fine
CONFIRMED!!
will write a short review soon
@medkid
Mate how am i suppose to run the flash plugin included , do i need to install the VLC player too coz i see you have included the plugin in the rom.
If i try to watch youtube video without installing the VLC player it gives me an error .
Am i doing something wrong??
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
I've included Flashvideobundle.cab in extended rom, if u installed it, you can go to start menu\programs\internet, you will see an IE shorcut right there.
But, you have to install TCPMP 0.72 to play FLV files directly from those sites
Garmin said:
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
Click to expand...
Click to collapse
that's your battery level, you will see it moving when it's charging
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
udayrulz said:
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
Click to expand...
Click to collapse
he he, thank you, but don't be so fast mate , I've built another rom when you upload it
i think i have bricked mine new P 7500
but there is nothing wrong i did with this device
tab is now in only conecting in APX
NVIDIA USB Boot-recovery driver for Mobile devices
no sign of charging and no light on display
is there any way to recover it back??????????
What exactly did you do? Nothing? You did try to hold the power button for 15 seconds, right?
yes exactly
when no luck in powering on
is this hard bricked on semi??
do i need Jtag for this??????
What did you try to do that caused this problem?
trying rooting
messed up with commands
so my tab is bricked ???????????????
If you really want some help from here, you'd better exactly describe (step by step) what you were doing when things went wrong. Fisrt post you say you did nothing wrong, 6th post you say you messed up commands. I would be jumpy too if my tab was bricked, but your short replies don't add to the possible solution.
a very good answer
thanks
but i have messed up with commands now
not while it was working fine
when nothing happened nothing shown on screen
then i started using commans of those rooting procedure mentioned in devlepment forum for 10.1
all i wanted to reboot it with commands
so i thought may be i have done something wrong with commands
thats why i wrote now that
messed up with commands now
only obove mentioned device is shown on my device manager
thats all happened
Ok, so we have apx mode for stock GT-P7500. I thougt that only was for that Google I/O version. But then you should be able to nvflash a firmmware on to your tab. APX mode is the same as nvflash. Do a search for NVflash on the tab and see if you come up with answers. Good luck
And by the way, whhat kind of rooting process where you doing? you should just download the root zip and flash thru stock recovery
Edit: Heres a link that might help http://forum.xda-developers.com/showthread.php?t=1130574
yes i was trying rooting exactly this procedure
http://forum.xda-developers.com/showthread.php?t=1130574
ok i have nvflash command software and stock firmware too
but the problem is, my tab does'nt recognised by odin
then how to flash it
thanks for your help but would you plz tell me how can i flash in apx mode??
Im not sure how its done on Galaxy tab. but in the download package there should be all that is needed for nvflash and you should ad the .img files for system and boot and recovery of the firmware version you want. And there should be a .bat file in the package i think. you should run it from there. But you need to google and collect info about this yourself as i have not done this myself on the Tab. Good Luck
can you boot into recovery? ! Holding volume down and power at the same time?
attu90 said:
can you boot into recovery? ! Holding volume down and power at the same time?
Click to expand...
Click to collapse
no not at all
wish it could boot in recovery so that i would able to install stock from odin
only black screen while apx found in device manager
nickwarn said:
Im not sure how its done on Galaxy tab. but in the download package there should be all that is needed for nvflash and you should ad the .img files for system and boot and recovery of the firmware version you want. And there should be a .bat file in the package i think. you should run it from there. But you need to google and collect info about this yourself as i have not done this myself on the Tab. Good Luck
Click to expand...
Click to collapse
thanks for your answer i have stock firmware
but its tar file not img file
searched on google too
how to flash firmware using nvflash
but could'nt found any useful post
all flash procedures on google are with odin or hemdell
still looking for help
ok after reading lot of pages
its clear that mine is not completly bricked
hope it will alive again
Sheeda Talli said:
ok after reading lot of pages
its clear that mine is not completly bricked
hope it will alive again
Click to expand...
Click to collapse
Good luck, go to this place and ask for help. http://tabletroms.com/forums/forum.php#major-devices-android They have very good guys for nvflash on other devices. And as nvflash is something within tegra2 it should be the same rules that apply for our TAB. Check in Asuus Transformer forum.
well i have checked that forum too
and there are only 10 or 15 threads in every section of samsung 10.1
it clearly shows repo of that forum
anyway i have posted there too, thanks for your advise
no one can ??????????
No luck? If i were you i would PM one of the Devs and see if one of them is in a good mood.
Edit: I was thinking, the nvflash mode is nothing to do with Samsung. Its a tegra2 thing so you should be able to follw the guide from Transformer forum. Just put Tab .img files in there. because the one for Transformer(nvflash package) comes with a .bat file that runs the install process. it goes thru all partions and installs all .img files. but you need to chek with the Dev for Transformer so that there is no partion map for Transformer or something in there.
Hi guys!!! Before start I want thanks all for all the commitment and the great work.
I follow this forum much but I write today because yesterday I kill my TG01 when I attempt to flash with WP7 with the tutorial that I link ( I cannot use Qinwengui tutorial because the link of WP7boot was removed ).
Hi think that the problem made from a problem when I open the archive that at the inside have the files to flash and, after I erase the nand, when in the next step I write the file occurred, an error with MIBIB writing appear, I try to replace it with no result, at the end, when I put back battery and replace I cannot turn on my TG01.... nothing to do............. is completly dead.
My battery is full (I measure it) only I can ask if there's a solution or if I found a Riff box can I repair this? And how?
Another thanks.
erasing NAND is dangerous do you have any sign of life at all on your tg01 any LED lights, screen ? try different button combinations ?
i did say flashing wp7 for a unexperienced member is not a good thing to do but never mind. report back if you get any LED lights or anything im no pro or anything but i will try my best to help you
I jonnyhall1bmx1, thanks for the quick answer, it's not my first time in flashing procedure, but this time I try this because i'm not at home at the moment of flash and i find only the file of tutorial that I haved link.
But..... no sign of life, is total dead, I try all the combination..... is total dead...
Do you know if riff nox can help me?
I see that situation is totally black!!!
hmmm im not 100% sure how a riff box works
and dont panic, ive had my tg01 doing nothing at all and managed somehow to bring it back to life haha
like i say im no expert i would like to help you but i can only fix a tg01 with LED lights im not sure what to do with it been dead.
your best option is to pm one of the smarter people like NOKSER although you would get an answer quicker out of a brick wall with him.
you could try MIRO, hes a great guy or any of the developers.
dont give up tho like i say my tg01 was once dead 3 times still always somehow got it running
Another thank, I wait if Nokser or Miro see this thread for some minute and after try to give a pm with the first post.
Seems to be real dead, when i put the battery recharger, not come out the orange led, i think now the phone not know to be a phone.
Thanks to all that can give me a help.
Bye.
RonnyRox said:
Another thank, I wait if Nokser or Miro see this thread for some minute and after try to give a pm with the first post.
Seems to be real dead, when i put the battery recharger, not come out the orange led, i think now the phone not know to be a phone.
Thanks to all that can give me a help.
Bye.
Click to expand...
Click to collapse
I not understand for end this problem, but if you not write completly nand parts(bootloader), then phone is dead... now only unbrick device in Riff Box.. or in any J-Tag
Maybe you write video from your screen phone...
Hi Nokser, thanks for your answer.
Ok if you see the tutorial that i use, i'm lock at this point:
Click erase,
when erase has completed click write.
At this point the led change various color but when terminate process give me a message like " MIBIB cannot write...etc...", I try to replace the folder with anothe zip download from another thread but with the same result.
When I disconnect the phone, put out the battery and after riconnect.
Result is a dead phone (completly off:screen and led and other ).
Do you know if in this state with riff box is possible to reflash the nand?
Thank you for all your hard work! Bye.
RonnyRox said:
Hi Nokser, thanks for your answer.
Ok if you see the tutorial that i use, i'm lock at this point:
Click erase,
when erase has completed click write.
At this point the led change various color but when terminate process give me a message like " MIBIB cannot write...etc...", I try to replace the folder with anothe zip download from another thread but with the same result.
When I disconnect the phone, put out the battery and after riconnect.
Result is a dead phone (completly off:screen and led and other ).
Do you know if in this state with riff box is possible to reflash the nand?
Thank you for all your hard work! Bye.
Click to expand...
Click to collapse
Maybe your battery is unloaded.
Riff Box J-tag re-write all nand partition, separate and spare.
Ok so you erased whole bootloader section and when writing it an error occured?
Then:
Riffbox only.
You can try to measure battery voltage with any voltagemeter but I think you killed it.
Thanks to all, yes I can rewrite all nand: Positive.
This is appen yesterday, i have just measured the battery is near to full.
No jtag, only Riff Box.
If I understand now I try to search a riffbox ( need any accessory? ) or search for someone that make this operation near my zone.
Thanks to all, if i have some notice i post it, if another one have another trick, please post.
Now i go to work ( night turn ) thanks for all!
RonnyRox said:
Thanks to all, yes I can rewrite all nand: Positive.
This is appen yesterday, i have just measured the battery is near to full.
No jtag, only Riff Box.
If I understand now I try to search a riffbox ( need any accessory? ) or search for someone that make this operation near my zone.
Thanks to all, if i have some notice i post it, if another one have another trick, please post.
Now i go to work ( night turn ) thanks for all!
Click to expand...
Click to collapse
Riff Box - This is a J-tag tool. This device, repair your phone. However, it is quite expensive.
Maybe you without battery, and wait 2-3 h. This device must rest. I had such cases more than once.
Hi Nokser, this morning I read your post and I try to put out the battery, after 2-3 hours I reconnect the battery with no results.
Now I buy the Riff Box, I think that after the NAND flash i try to sell it right to recover a part of money.
In another thread I see this your photo that I link under this post.
Is this connection the right connection with the Riff box?
And is this without any accessory ( only the cable )?
Always thanks, bye.
RonnyRox said:
Hi Nokser, this morning I read your post and I try to put out the battery, after 2-3 hours I reconnect the battery with no results.
Now I buy the Riff Box, I think that after the NAND flash i try to sell it right to recover a part of money.
In another thread I see this your photo that I link under this post.
Is this connection the right connection with the Riff box?
And is this without any accessory ( only the cable )?
Always thanks, bye.
Click to expand...
Click to collapse
You have bro all info in gsmhosting.com.
All news, method, etc.. or PM for me
Thank for the info, if I need help in the next day I send a PM to you.
I just wait the Riff Box, i think it comes to me in monday.
I see your site and I see some news, I wait for camera driver!!!
Thanks Nokser.
I guys.
Today I try to repair my TG01 but when I press resurrection I receive this error:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Toshiba TG01]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45
I know that other guys have the same problem, I have just verified connection and all the advice, who can help me?
Try as HD2
I found it in another forum, now I try this..... Very thanks!
Hi guys, I follow this instruction that I found in another forum, because my initial problem was that I erase the NAND:
Download full backup from this link :
http://rapidshare.com/files/42229365...ull_backup.rar
Connect phone to RIFF, go to DCC TAB, select HTC HD2.
Open full backup, and set following options :
- Start address: 0x0000000000
- Data Length: 0x0000800000
- Check "Image file is used"
- Check "Use address as offset"
- Select ROM1
Other options must be NOT Checked, click "Write". This will restore erased area in modem part.
After more test the only mode that give me the possibility to update is to short pad 1 and 3, turn on the phone and connect via usb: TG01 in Download Mode.
After this perform ROM upgrade using TG01 downloader.
Now I have the problem of Win7 x64 and the driver...
When I have news, I will write.
Bye and thanks to all have help me.
TG01 Return to life!!!
OK, now I have TG01 with WM 6.5 Nokser with Radio 0321.
A partial correction:
After the resurrection with Riff Box "not need" to short Pad 1 and 3, my problem was the battery is go down with the much try.
I make a recharge to much to have 3,7V and after with TG Downloader and Rom.bin of WM 6.5 I flash with success the phone .
For solve the Win7 x64 problem I install Virtual PC with WIN XP and execute all under this.
Now I still do a full recharge and this evening I finally can try WP7!!! ( Cross the finger... ).
Special thanks at Nokser and all the guys that give me a great help.
Thanks to all!!! Happy Christmas and Happy New Year!!!!
Response to other member about detailed step by step instruction, hope this would be help.
Download the attached file for PDF instruction.
(I will write pdf contents directly in this thread if i have time)
Thanks to Dev (Rebellos and friends) that make this happen!! :good:
NOTE :
Do at your own risk!
please ask here if you dont understand
(dont disturb dev thread with stupid and noob question)
Last, give feedback if you found wrong step or misguided.
FAQ & Problem Solving
Q : How to turn off Badadroid ?
A : Press and hold power+call until it's dead..
Q : I'm stuck at FOTA OUTPUT bla bla bla, how?
A : Get your finger as far as possible from middle button.
Press the call key just milliseconds before the power key and keep them pressed (from SuperSaiyan4 :good: )
Double check your files names match your beloved phone type.
Q : ...
A : ...
Good
It's good for all noobs thank's
Ps : i like the Bonus
FlouSS said:
It's good for all noobs thank's
Ps : i like the Bonus
Click to expand...
Click to collapse
i think it should be "iBonus"..
I am in the last step of the instruction where I will press call+power at the same time.. I have pressed it but the one that appeare is FOTA OUTPUT ENABLED -- BL3 Dload mode & bTerm -- ... I thought that badadroid will appear and I'll wait for 5minutes. now the 5minutes have passed but nothing is happening yet. it still shows FOTA OUTPUT ENABLED -- BL3 Dload mode & bTerm -- .. is that normal??
darcascor said:
I am in the last step of the instruction where I will press call+power at the same time.. I have pressed it but the one that appeare is FOTA OUTPUT ENABLED -- BL3 Dload mode & bTerm -- ... I thought that badadroid will appear and I'll wait for 5minutes. now the 5minutes have passed but nothing is happening yet. it still shows FOTA OUTPUT ENABLED -- BL3 Dload mode & bTerm -- .. is that normal??
Click to expand...
Click to collapse
Are you flashed right fota ?
hero355 said:
Are you flashed right fota ?
Click to expand...
Click to collapse
I just followed what is in the instruction that he gave. please help me..
darcascor said:
I just followed what is in the instruction that he gave. please help me..
Click to expand...
Click to collapse
What's your phone model ? then download and flash correct fota and bootfiles again
it could happen if :
1. you use wrong file
OR
2. you ACCIDENTLY press middle button or get your finger too near with it.
Solution for :
1. confirm your files is right
2. when press power+call, try to get your finger as far as possible from middle button.
Middle button used for "BL3 Dload mode & bTerm" purpose, so it isn't wrong if you got there by pressing it.
can u make a tutorial on how to flash CFW? because i cannot find one here in xda-developers and in badahub.com
I want to install turko v8. all i have read there is for professional flasher. For noob like me it is hopeless to flash.
thanks in advance if you can make one or if you can teach me how to.
darcascor said:
can u make a tutorial on how to flash CFW? because i cannot find one here in xda-developers and in badahub.com
I want to install turko v8. all i have read there is for professional flasher. For noob like me it is hopeless to flash.
thanks in advance if you can make one or if you can teach me how to.
Click to expand...
Click to collapse
Ask people in this link.. its special forum for bada CFW.
forum.xda-developers.com/forumdisplay.php?f=921
please dont ask or answer in android section. thx
blocked in cyanogenmod logo
I i'm blocked in cyanogenmod logo help me !!!!!!!!!!!!!!!!!
Wifi don t work ,,,???
you can just turn off badadroid by pressing call end key only
Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................