My SamSung S2 up rom Stock 4.1.2 via odin or cook rom base 4.1.2 via CMW is bootlooped logo S2 I wipped all before and after uprom. And i up 2.3.6 or 4.0.3 or stock rom > 4.2 is not bootloop. i want up Wanna lite 4.1.2 rom, how to fix bootloop? Thanks you very much, sorry for my bad english.
P/S: When i change Mobile Networks to GSM only is Not Service, i can call when change Mobile Networks to 3G with poor network.i tried modems.
Flash Philz kernel first. Reboot in Recovery and flash Wanam Lite.
PS: what is 'up'?
Donnie Sins said:
Flash Philz kernel first. Reboot in Recovery and flash Wanam Lite.
PS: what is 'up'?
Click to expand...
Click to collapse
Yes, it is still boot loop, i flash form Wannalite 4.0.3 via Philz to Wannalite base 4.1.2, Stock rom 4.1.2 also bootloop.
You can try to do a full wipe, install Wanam (not Wanna) Lite.
Then reboot into Recovery, flash Philz kernel and reboot system.
Did you try to flash another custom rom by the way?
Donnie Sins said:
You can try to do a full wipe, install Wanam (not Wanna) Lite.
Then reboot into Recovery, flash Philz kernel and reboot system.
Did you try to flash another custom rom by the way?
Click to expand...
Click to collapse
Yes, i flashed stock 4.0.3, many Custom rom 4.2 or 4.3 it ok. but when i flash custom rom base 4.1.2 is bootloop even stock 4.1.2 still boot loop.
I Flash stock 4.0.3 -> Flashed Kernel Philz -> Do Wipe -> FLash Custom rom base 4.1.2 -> Do Wipe -> Bootloop
Tinhte1989 said:
I Flash stock 4.0.3 -> Flashed Kernel Philz -> Do Wipe -> FLash Custom rom base 4.1.2 -> Do Wipe -> Bootloop
Click to expand...
Click to collapse
After flashing a rom, you shouldn't do another wipe. In that case you erase the rom you've just flashed, and there is nothing to boot up.
Donnie Sins said:
After flashing a rom, you shouldn't do another wipe. In that case you erase the rom you've just flashed, and there is nothing to boot up.
Click to expand...
Click to collapse
It still bootloop. i did not wipe after flashed
blueforever89 said:
It still bootloop. i did not wipe after flashed
Click to expand...
Click to collapse
Last thing that comes up in my mind is: flash the rom. After it, reboot into Recovery, DON'T wipe and reflash the rom, reboot.
Not really sure if this is making any difference, but maybe it is
Edit: I just saw you're a different person.. What's up with that?
Donnie Sins said:
Last thing that comes up in my mind is: flash the rom. After it, reboot into Recovery, DON'T wipe and reflash the rom, reboot.
Not really sure if this is making any difference, but maybe it is
Edit: I just saw you're a different person.. What's up with that?
Click to expand...
Click to collapse
i tried, not solve !
1 account log from gmail, 1 account xda :fingers-crossed:
blueforever89 said:
i tried, not solve !
1 account log from gmail, 1 account xda :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I've no idea... Good luck anyway:thumbup:
Donnie Sins said:
Sorry, I've no idea... Good luck anyway:thumbup:
Click to expand...
Click to collapse
i don't know why i can't Flash rom base 4.1.2 JB!
Thanks for your help!
Any idea? Please Help me,
Redownload everything again... then check md5 sum if its correct..if its a mismatch it will be a bootloop
Then flash latest philz in download mode
Go to cwm
Wipe data
Wipe dalvik
Wipe cache
Flash neat rom (juzt a suggestion to use a rom wid preload content)
Reboot...
doctor_droid said:
Redownload everything again... then check md5 sum if its correct..if its a mismatch it will be a bootloop
Then flash latest philz in download mode
Go to cwm
Wipe data
Wipe dalvik
Wipe cache
Flash neat rom (juzt a suggestion to use a rom wid preload content)
Reboot...
Click to expand...
Click to collapse
I flashed I9100XWLSW_NeatROM_Lite_v4.8.zip rom with Same MD5 Sum. But not getting out Bootloop Android Neatrom, i tried many stock 4.1.2, or cook like wamma lite, Neat base 4.1.2. all is getting bootloop. Other rom not Base 4.1.2 is ok. I can't understand.
Have Any Idead?
Related
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
I installed 4.1.2 on my s2 gt i9100 no brand but will not start, crashes on startup with the samsung logo. Why?
I now have the phone down, I think I have to replace the 4.0.3
this is the tread http://forum.xda-developers.com/showthread.php?t=1544487
Did you use CWM recovery wipe? Maybe it's emmc brick bug?
It can't be a brick as it is turning on
And it's flashable with Odin, not CWM.
Sent from the Matrix
mar10o said:
Did you use CWM recovery wipe? Maybe it's emmc brick bug?
Click to expand...
Click to collapse
CWM doesn't have the emmc bug, Its a bug in the stock 4.0.4 recovery.
Conte94 said:
I installed 4.1.2 on my s2 gt i9100 no brand but will not start, crashes on startup with the samsung logo. Why?
I now have the phone down, I think I have to replace the 4.0.3
this is the tread http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
This is most likely because you have just flashed 4.1.2 without wiping old rom data. Its advised on just about every single rom thread to wipe before flash. If you dont want to lose apps/appdata then use Titanium Backup Pro.
TheATHEiST said:
CWM doesn't have the emmc bug, Its a bug in the stock 4.0.4 recovery.
This is most likely because you have just flashed 4.1.2 without wiping old rom data. Its advised on just about every single rom thread to wipe before flash. If you dont want to lose apps/appdata then use Titanium Backup Pro.
Click to expand...
Click to collapse
you have made a backup of the app + system data with titanium. also save photos, music and video
I did not think to flash a firmware I had to clean everything, I thought it was enough to download the file, put the phone in download mode with odin and startare
now how do I proceed? I wipe the 3 as I did for the rom?
Conte94 said:
you have made a backup of the app + system data with titanium. also save photos, music and video
I did not think to flash a firmware I had to clean everything, I thought it was enough to download the file, put the phone in download mode with odin and startare
now how do I proceed? I wipe the 3 as I did for the rom?
Click to expand...
Click to collapse
1) Put ur phone into dwnld mode and flash a stock ICS 4.0.3 firmware using ODIN to make ur phone up and running.
2) after that root ur phone by flashing the tar file of Siyah kernel v5.0.1 vide ODIN.
3) then reboot to siyah kernel recovery and wipe Data/factory reset and the wipe cache partition.
4)Dwnld the stock JB firmware from that link u provided and flash the same using ODIN
that way u will have a clean install of stock JB on ur phone
but if by dalal recovery without installing the 4.0.3 and do the wipe, and then install the 4.1.2 is not good?
Conte94 said:
but if by dalal recovery without installing the 4.0.3 and do the wipe, and then install the 4.1.2 is not good?
Click to expand...
Click to collapse
u can give it a try that way and post ur Success/Failure feed back over here
IMO the best bet is what i stated in my earlier post
Sun90 said:
u can give it a try that way and post ur Success/Failure feed back over here
IMO the best bet is what i stated in my earlier post
Click to expand...
Click to collapse
He has no need to do what you said and install rom twice. All he needs to do is flash kernel like Siyah v6 beta4, reboot into download mode, wipe data and then flash his stock rom via download. No need to install 4.0.3 first its just waste of time.
and where can I download the file of Siyah kernel v5.0.1?you say the kernel?
I installed the 4.1.2 doing the wipe, and everything went ok.
so every time I install a new firmware should I do the wipe right?
and then I do not have siyah kernel but everything went well from recovery
Conte94 said:
I installed the 4.1.2 doing the wipe, and everything went ok.
so every time I install a new firmware should I do the wipe right?
and then I do not have siyah kernel but everything went well from recovery
Click to expand...
Click to collapse
Good:good:
Yes, its always better to do the wipes first for a clean install, as u can see in ur case itself
Enjoy the rom for now and no need to worry about siyah kernel for now
ok
however, once I had siyah then I removed
thank you very much for your help, I did not know I had to do so for the firmware
thank you very much
Hey guyz
I flashed siyah kernel
Then I tried dual boot wid sammy jb (1st ROM) and cm10.1 as second.
However I wasnt able to boot to second ROM and I had just black screen
Then I removed 2nd ROM
And tried to boot into primary
But got a bootloop.
Then i wiped cache dalvik cache and partition cache.. Still no luck
Then I restored nandroid.
No luck
Then I flashed stock ROM wid odin
Still no luck
What am I missing.. M new to Samsung..
doctor_droid said:
Hey guyz
I flashed siyah kernel
Then I tried dual boot wid sammy jb (1st ROM) and cm10.1 as second.
However I wasnt able to boot to second ROM and I had just black screen
Then I removed 2nd ROM
And tried to boot into primary
But got a bootloop.
Then i wiped cache dalvik cache and partition cache.. Still no luck
Then I restored nandroid.
No luck
Then I flashed stock ROM wid odin
Still no luck
What am I missing.. M new to Samsung..
Click to expand...
Click to collapse
What ur missing for now is a little commonsense to Read before doing anything silly
1)U should be aware (if not get it now), that u cannot Dual boot Stock Samsung JB4.1.2 or Roms based on it, unless they are modified.
2) Siyah doesn't support Rom's like CM10.1 which is based on Android 4.2.2 properly.
3) Dual boot not wrk'ng with JB 4.1.2 (stock samsung/and roms based on it) is due to the reason that they use 'Preload partition' which is required as 'Secondary rom-partition' for Dual boot .
4) which is the reason why u werent able to boot CM10.1 in the firsrt place and could'nt restore/boot back the stock JB (reason being the data in the preload/secondary rom partition being deleted)
5) now start afresh by installing/flashing a stock JB rom via ODIN.
He he he I read siyah doesn't support jb dual boot still was stupid enough to try :/ ...
And as I mentioned...flash stock still doesn't let it boot... I see Samsung and then boot loop
Sent from my GT-I9100 using Tapatalk 2
doctor_droid said:
He he he I read siyah doesn't support jb dual boot still was stupid enough to try :/ ...
And as I mentioned...flash stock still doesn't let it boot... I see Samsung and then boot loop
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
try flashing a custom kernel like 'Philz' from Odin, then enter its recovery and do full wipe including 'Preload',after that try flashing either a stock rom from odin or a Stock based custom rom like 'Neat rom' or 'Alliance Rom' from philz recovery and see
Sun90 said:
try flashing a custom kernel like 'Philz' from Odin, then enter its recovery and do full wipe including 'Preload',after that try flashing either a stock rom from odin or a Stock based custom rom like 'Neat rom' or 'Alliance Rom' from philz recovery and see
Click to expand...
Click to collapse
Sure will try and let u knw...currently m able to boot official cm and enjoying it... bt having poor battery
Sent from my GT-I9100 using Tapatalk 2
Sun90 said:
try flashing a custom kernel like 'Philz' from Odin, then enter its recovery and do full wipe including 'Preload',after that try flashing either a stock rom from odin or a Stock based custom rom like 'Neat rom' or 'Alliance Rom' from philz recovery and see
Click to expand...
Click to collapse
okay i flashed philz kernel ... formated /wiped data ,dalvik,system,cache preload, ... flashed neat rom.. success... then i tried flashing stock rom.. got a bootloop after seeing samsung logo...
i can restore nandroid of cm10.1
bt restoring nandroid of pure stock gives bootloop.
Sounds like your problem is to do with the /preload folder. To restore a stock nandroid, you also have to restore the preload folder associated with that backup. Search on xda for hawkerpaul's backup and restore scripts for preload, and read his OP on how to use them. That should get you sorted. As you wouldn't have already backed it up from the sound of things, you might not have any luck restoring that exact stock backup, and may have to reflash. If you need to extract data from the nandroid, titanium backup can extract data from a nandroid.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Newbees said:
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Click to expand...
Click to collapse
did you fix permissions ?
slimlo said:
did you fix permissions ?
Click to expand...
Click to collapse
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Newbees said:
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Click to expand...
Click to collapse
yep in recovery mode
I found the fix permission Sir. Shall I flash again the kernel and do a fix permission?
Sir, it's still stuck at the Siyah logo
If you've formatted system as you say you will need to flash a rom, I'm running the latest neatrom lite, I'm confused by your post its 4am here
Sent from my GT-I9100 using Tapatalk 2
Hello sir, sorry if I disturbed your sleep XD no I did not flash a ROM. I just flashed a kernel using ODIN. Should I flash a ROM?
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Newbees said:
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Click to expand...
Click to collapse
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
slimlo said:
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
Click to expand...
Click to collapse
Thanks Sir Slim, I will try to flash the Snapdragon ROM as soon as after I finish downloading it. Because I believe I have cleared out the operating system and other important data on my device, that's why I need a new ROM.
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
[email protected] said:
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
Click to expand...
Click to collapse
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Newbees said:
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Click to expand...
Click to collapse
Nope it's not the right reasons may be you flashed a wrong siyah kernel.
Tell me your android version is it jellybean or ics
Sent from my GT-I9100 using xda premium
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom