Related
Here is the tutorial for Installing stock 4.0.2.A.0.62 ROM plus root and CWM. I am not responsible or anyone mentioned below for bricking your phone in case, tested on my Xperia ray with unlocked bootloader using S1 tool.
Requirements
Unlocked Bootloader (preferred) although there is a work around for locked bootloader
4.0.2.A.0.62 FTF files
Flashtool
recoveryRay.img by and Rootxperia.zip b1n4ry (for rooting)
CWM
Installation:
How to Install stock 4.0.2.A.0.62 ROM:
Download this stock 4.0.2.A.0.62 ROM. Thank you Aire for providing the link.
After download you will have a zip file. Extract it.
Download flashtool here and extract it.
Create FTF file using flashtool from the 4.0.2.A.0.62 ROM zip you extracted earlier. Now if you don't know how to create FTF files, there's a good tutorial here.
If you successfully created FTF file, you should see a file with extension “.ftf” in the “firmwares” folder inside “FlashTool” folder
Run the executable “X10FlashTool.exe” located in the FlashTool folder
Now click “Flash” button and select flashboot. Now select the firmware from the popup menu. Make sure “Wipe user data” box is checked and then click “OK”.
The application will ask you to put your Ray in flashboot mode, to do this turn off the phone, hold the volume down button while while connecting the USB cable to your computer.
Follow the on screen instruction and your device will reboot. Notice that the reboot process will take longer at first.
How to install Root
Please note that this is only applied to devices with unlocked bootloader. Alternately, you can just install a custom kernel and root using zergrush method but if you want to try the .62 kernel from this stock rom then do this.
Download rootxperia.zip here and place it in your sd card
Enter device in fastboot mode. Turn off phone, hold volume up while you connect the USB cable to computer
Download the recoverRAY.img provided below, you will get a zip file, extract it.
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
Place the recoveryRAy.img inside the folder
Open command line in this folder
Test if it recognize your device, to do this type fastboot devices, if there is a result here proceed.
Now here's the tricky part, to enter a temporary recovery type fastboot boot recoveryRAY.img
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
Now wait and your phone will reboot, you will see the FREE XPERIA splash screen and your device will now enter temp CWM recovery
On your phone choose install custom zip, locate the rootxperia.zip you added earlier in your SD card and flash it.
Reboot, your device is now rooted.
*to root your device with locked bootloader, they say you can install previous stock kernel and root using zergrush method.
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
idareyoutoclickthis said:
Here is the tutorial for Installing stock 4.0.2.A.0.62 ROM plus root and CWM. I am not responsible or anyone mentioned below for bricking your phone in case, tested on my Xperia ray with unlocked bootloader using S1 tool.
Requirements
Unlocked Bootloader (preferred) although there is a work around for locked bootloader
4.0.2.A.0.62 FTF files
Flashtool
recoveryRay.img by and Rootxperia.zip b1n4ry (for rooting)
CWM
Installation:
How to Install stock 4.0.2.A.0.62 ROM:
Download this stock 4.0.2.A.0.62 ROM. Thank you Aire for providing the link.
After download you will have a zip file. Extract it.
Download flashtool here and extract it.
Create FTF file using flashtool from the 4.0.2.A.0.62 ROM zip you extracted earlier. Now if you don't know how to create FTF files, there's a good tutorial here.
If you successfully created FTF file, you should see a file with extension “.ftf” in the “firmwares” folder inside “FlashTool” folder
Run the executable “X10FlashTool.exe” located in the FlashTool folder
Now click “Flash” button and select flashboot. Now select the firmware from the popup menu. Make sure “Wipe user data” box is checked and then click “OK”.
The application will ask you to put your Ray in flashboot mode, to do this turn off the phone, hold the volume down button while while connecting the USB cable to your computer.
Follow the on screen instruction and your device will reboot. Notice that the reboot process will take longer at first.
How to install Root
Please note that this is only applied to devices with unlocked bootloader. Alternately, you can just install a custom kernel and root using zergrush method but if you want to try the .62 kernel from this stock rom then do this.
Download rootxperia.zip here and place it in your sd card
Enter device in fastboot mode. Turn off phone, hold volume up while you connect the USB cable to computer
Download the recoverRAY.img provided below, you will get a zip file, extract it.
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
Place the recoveryRAy.img inside the folder
Open command line in this folder
Test if it recognize your device, to do this type flashboot devices, if there is a result here proceed.
Now here's the tricky part, to enter a temporary recovery type fastboot boot recoveryRAY.img
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
Now wait and your phone will reboot, you will see the FREE XPERIA splash screen and your device will not enter temp CWM recovery
Choose install custom zip, locate the rootxperia.zip you added earlier in your SD card and flash it.
Reboot, your device is now rooted.
*to root your device with locked bootloader, they say you can install previous stock kernel and root using zergrush method.
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
Thanks for this.. but.. i wonder what happened if i update from SEUS.. :-/ and also, is the kernel from aire already support Overclocking?
hansip87 said:
Thanks for this.. but.. i wonder what happened if i update from SEUS.. :-/ and also, is the kernel from aire already support Overclocking?
Click to expand...
Click to collapse
Aire said, his current kernel supports .62 but they are currently working for repack based on this new firmware.
I haven't tried installing any custom firmware at the moment, I want to test this stock firmware for changes and improvement especially the baseband and battery consumption.
Sent from my ST18i using xda premium
Hm ok, btw, can you post the original link for rootxperia.zip?
EDIT: sorry you already did that thanks!
UPDATE: I'm trying to do SEUS update now though. Hope this thing won't brick..
UPDATE 2: SEUS update won't brick our phone if it uses the Testpoint method O what a happy day it is.. Let's see if i can flash aire kernel back.
is that a global version or what ? some people said, that version has some bugs..
can we root this version with the new DoomLord v4 Root ?
from the Arc forum, i found that they can root their device with .62 firmware just by using flashtool.. can we do that so ?
thx
hansip87 said:
Hm ok, btw, can you post the original link for rootxperia.zip?
UPDATE: I'm trying to do SEUS update now though. Hope this thing won't brick..
UPDATE 2: SEUS update won't brick our phone if it uses the Testpoint method O what a happy day it is.. Let's see if i can flash aire kernel back.
Click to expand...
Click to collapse
Wow that is good news. Update is still not available in my region.
adarwis said:
is that a global version or what ? some people said, that version has some bugs..
can we root this version with the new DoomLord v4 Root ?
from the Arc forum, i found that they can root their device with .62 firmware just by using flashtool.. can we do that so ?
thx
Click to expand...
Click to collapse
The firmware is provided by Aire, however if you encounter ftf generic firmware, it will be nice if you post it here.
As to bugs, I'm using this firmware for a day now and I noticed improvement in battery and speed, no bugs so far. I haven't tried the doomlord v4 root, but rooting via recovery is easy.
Sent from my ST18i using xda premium
idareyoutoclickthis said:
Wow that is good news. Update is still not available in my region.
The firmware is provided by Aire, however if you encounter ftf generic firmware, it will be nice if you post it here.
As to bugs, I'm using this firmware for a day now and I noticed improvement in battery and speed, no bugs so far. I haven't tried the doomlord v4 root, but rooting via recovery is easy.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Yep it is I have already flashed back aire's kernel and it is flawless no more test point required. Yay! Thanks for all the devs.
Xperia blog says the firmware is targeted for users in Middle East North Africa region.
Users else where may see little if any noticeable change
sent from my gorgeus Xperia Ray
Does this not work if we previously updated the phone to 4.0.2.A.0.62 using SEUS?
Coz i got the following error when i ran the "fastboot boot recoveryRAY.img" command..
FAILED (remote: The Device must be rooted first)
San.subs said:
Does this not work if we previously updated the phone to 4.0.2.A.0.62 using SEUS?
Coz i got the following error when i ran the "fastboot boot recoveryRAY.img" command..
FAILED (remote: The Device must be rooted first)
Click to expand...
Click to collapse
O that.. That means you need to unlock the bootloader (at least with Test Point method). Never thought that won't work before.
most download link from MultiUpload cannot download the firmware 4.0.2.A.0.62 ROM, any alternative link?
Thanks.
San.subs said:
Does this not work if we previously updated the phone to 4.0.2.A.0.62 using SEUS?
Coz i got the following error when i ran the "fastboot boot recoveryRAY.img" command..
FAILED (remote: The Device must be rooted first)
Click to expand...
Click to collapse
If your bootloader is still locked you can not root your device using that method. The only work around is to install previous kernel and root using zergrush method.
hansip87 said:
O that.. That means you need to unlock the bootloader (at least with Test Point method). Never thought that won't work before.
Click to expand...
Click to collapse
idareyoutoclickthis said:
If your bootloader is still locked you can not root your device using that method. The only work around is to install previous kernel and root using zergrush method.
Click to expand...
Click to collapse
Thank you "idareyoutoclickthis" and "hansip87" for your replies.
In fact I had rooted my Ray earlier 4.0.2.A.0.42ver using the zergrush method using DooMLoRD_v4_Root Which I lost when I upgraded to 4.0.2.A.0.62ver. Now DooMLoRD_v4_Root won't work with 4.0.2.A.0.62ver update.
Now what about the bootloader thing? Sorry for being so dumb. Can you please elaborate a bit? I've got only got to the point wherein i checked the status using the service menu (*#*#.....#*#). It only says Rooting Status: Bootloader unlocking allowed: Yes.
What do I have to do now? Please help.
San.subs said:
Thank you "idareyoutoclickthis" and "hansip87" for your replies.
In fact I had rooted my Ray earlier 4.0.2.A.0.42ver using the zergrush method using DooMLoRD_v4_Root Which I lost when I upgraded to 4.0.2.A.0.62ver. Now DooMLoRD_v4_Root won't work with 4.0.2.A.0.62ver update.
Now what about the bootloader thing? Sorry for being so dumb. Can you please elaborate a bit? I've got only got to the point wherein i checked the status using the service menu (*#*#.....#*#). It only says Rooting Status: Bootloader unlocking allowed: Yes.
What do I have to do now? Please help.
Click to expand...
Click to collapse
Indeed .62 is the latest built which include alot of improvements specially on batter issue.
If you don't want custom rom and kernel and is contented with the stock ROM and kernel then you don't need to unlock your bootloader.
to root your device, you need to flash stock 4.0.2.A.0.42 kernel only, you can do this with locked bootloader and root using zergrush method.
idareyoutoclickthis said:
Indeed .62 is the latest built which include alot of improvements specially on batter issue.
If you don't want custom rom and kernel and is contented with the stock ROM and kernel then you don't need to unlock your bootloader.
to root your device, you need to flash stock 4.0.2.A.0.42 kernel only, you can do this with locked bootloader and root using zergrush method.
Click to expand...
Click to collapse
Do I lose root if I restore the .62 kernel after rooting?
slimfady said:
Do I lose root if I restore the .62 kernel after rooting?
Click to expand...
Click to collapse
I'm afraid yes but i never tried it though cause my bootloader is unlocked.
hi, what is the work around for locked bootloader , i am using 4.0.2.A.0.62, i dont want to use any custome rom or mod i want only root intalled on this. i use ARC -S
Regards,
M.Baradharajan
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
hi, where can i get the original stock 4.0.2.A.0.42 ROM, not modified one to reflash from 4.0.2.A.0.62 rom.
Regards,
M.Baradharajan
baradharajan said:
hi, what is the work around for locked bootloader , i am using 4.0.2.A.0.62, i dont want to use any custome rom or mod i want only root intalled on this. i use ARC -S
Regards,
M.Baradharajan
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
hi, where can i get the original stock 4.0.2.A.0.42 ROM, not modified one to reflash from 4.0.2.A.0.62 rom.
Regards,
M.Baradharajan
Click to expand...
Click to collapse
Ask in the Arc forum please.
even i got the same error remote: device must be rooted first... my bootloaders are unlocked.. wht shud i do now
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
I dont read careful this note and now my phone's brick. I cannot access flashmode or fastbootmode anymore. Now my phone only log in temRECOVERY
Can anyone help me. From vietnam
First of all, im newbie and i dont know much about this
I installed new wolfbreak v7 rom on xperia x10 but i cant get wifi working. I've read that i need doomlord's unlocked bootloaders so i downloaded .ftf file but i cant flash it, i get this in flashtool (newest version):
17/007/2012 13:07:13 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
I was following this thread but i cant get it to flash.
And i know i need that CWM recovery to flash the wifi.zip file but how do i get that recovery.
If anyone can tell me how do i unlock bootloader on my phone (xperia x10). My phone is not sim-unlocked, only rooted.
Initially (from a shop) in the phone the bootloader is locked.
If you want to flash a kernel for unblocked bootloader, then at first it is needed to execute procedure of unlocking of bootloader.
how do i do that?
sukyman said:
how do i do that?
Click to expand...
Click to collapse
Is your phone sim-unlocked? Cwm is included within doomkernel.
Sent from my X10i using XDA App
laneyofdeath said:
Is your phone sim-unlocked? Cwm is included within doomkernel.
Click to expand...
Click to collapse
no, and i know that cwm is included within doomkernel but i cant flash that kernel
sukyman said:
no, and i know that cwm is included within doomkernel but i cant flash that kernel
Click to expand...
Click to collapse
Oh ok apologies pal I never seen issue like that before maybe pm androxyde he may be able to shed light on it
Sent from my X10i using XDA App
laneyofdeath said:
Oh ok apologies pal I never seen issue like that before maybe pm androxyde he may be able to shed light on it
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Edit is ur bootloader still locked? If so I'd suggest unlocking (it very easy to do and can be relocked for warranty purposes etc)
Sent from my X10i using XDA App
u can follow below step to use CWM recovery:
1.download CWM recovery zip file and put it into SD card
2.boot into your phone installed recovery
3.select "Install custom zip" and select the CWM recovery zip file to flash
then u can use CWM recovery.
Hi, I'm on wolf's Rom.
First of, did you make a clean install starting from 2.1?
Then after rooting your phone & putting xrecovery onto it, you have to unlock your bootloader with the same flashtool. ( plug in phone & press unlock bootloader in flash tool)
After that's done, enter xrecovery, wipe everything(factory reset etc.) & install Wolf's Rom for UB Important is, do not reboot, take out your battery & flash dooms kernal through flash tool!!
When that's done, you can install dooms WiFi fix through xrecovery!!
Hope I could help you out
Sent from my X10 using Wolf's Gingerbread UB
Hi.
Could you link to both the kernels and the WiFi modules?
Sent from my X10i using Tapatalk
Try this link:
http://forum.xda-developers.com/showthread.php?p=19699711#post19699711
Don't forget to press the thanks button
Sent from my X10 using Wolf's Gingerbread UB
For all of you having problems with unlocking bootloader. Simply follow this(I did this with Wolfbreak's v7 ROM on):
1. Download the latest Flashtool v0.6.7.0(you can get it here)
2. Run it, then plug the device.
3. (In flashtool) Go to Plugins> Unlock bootloader.
4. Follow the instructions in flashtool(always look at the log)
5. Done, your bootloader is unlocked.
Hope this helps
Download link is not reuploaded
EDIT: Oh and yeah, don't forget to install the flashtool drivers, it can be found on the install directory "Flashtool\drivers". If a message appears while installing just click "Install this driver anyway" it will appear many times, just keep on clicking it til installation is done. Good Luck everyone!
Link is dead
ItBankRock said:
For all of you having problems with unlocking bootloader. Simply follow this(I did this with Wolfbreak's v7 ROM on):
1. Download the latest Flashtool v0.6.7.0(you can get it here)
2. Run it, then plug the device.
3. (In flashtool) Go to Plugins> Unlock bootloader.
4. Follow the instructions in flashtool(always look at the log)
5. Done, you're bootloader is unlocked.
Hope this helps
Download link is not reuploaded
EDIT: Oh and yeah, don't forget to install the flashtool drivers, it can be found on the install directory "Flashtool\drivers". If a message appears while installing just click "Install this driver anyway" it will appear many times, just keep on clicking it til installation is done. Good Luck everyone!
Click to expand...
Click to collapse
some say to flash the Doomskernel after Bootloader unlocking , and then install the ROM , what is the correct procedure ..
Details here http://forum.xda-developers.com/showthread.php?t=1503211
Requirements
Xperia Ray [ST18i] - Unlocked Bootloader
Drivers for Windows - Install PC Companion
[Only for Android 4.0.3] KERNEL from this Link | I use this .img file
Updated to Last Firmware Version from OTA
After Install Update from OTA, you must Unlock you Bootloader.
Tested!
Model Number: ST18i
Android Version: 2.3.4 & 4.0.3
Baseband Version: XXXXX-XXXXXXXXX-XXXXXXX-64 & XXXXX-XXXXXXXXX-XXXXXXX-70
Build Number: 4.0.2.A.0.62 & 4.1.A.0.562
How to Install Root
Download rootxperia.zip here and place it in your sd card
Enter device in fastboot mode. Turn off phone, hold volume up while you connect the USB cable to computer
Download the recoverRAY.img, you will get a zip file, extract it.
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
Place the recoveryRAy.img inside the folder
Open command line in this folder
Test if it recognize your device, to do this type fastboot devices, if there is a result here proceed.
Now here's the tricky part, to enter a temporary recovery type fastboot boot recoveryRAY.img
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
Now wait and your phone will reboot, you will see the FREE XPERIA splash screen and your device will now enter temp CWM recovery
On your phone choose install custom zip, locate the rootxperia.zip you added earlier in your SD card and flash it.
Reboot, your device is now rooted.
Click to expand...
Click to collapse
How to install CWM (Only for 2.3.4!)
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
I use this method & success to Root My Xperia Ray.
Say Thanks please!
Another Great work by Persian-Devs
I cant install CWM by this method!
I cant see the error but i cant get into recovery using vol down.
When you see Sony Ericsson Logo (First Time), press 2 or 3 time Vol - & you can see CWM...
vagrik said:
When you see Sony Ericsson Logo (First Time), press 2 or 3 time Vol - & you can see CWM...
Click to expand...
Click to collapse
Ya i tried that. But i did not enter cwn.
I guess it hasnt been installed prop. idk why.
Do you Unlock Bootloader?
EDIT:
You must press Vol - in Sony Ericsson... not Logo picture. First Logo.
vagrik said:
Do you Unlock Bootloader?
EDIT:
You must press Vol - in Sony Ericsson... not Logo picture. First Logo.
Click to expand...
Click to collapse
Yes unlocked bootloader.
And yes vol- when i see SonyEricsson.
But i cant get into recovery!
I think you must do again (flash & more)
Sent from my ST18i using Tapatalk
That's awesome! Thanks!
Do you think this method will also work on the ARC S (ST18i)?
Sorry... TL18a
Your tutorial is a bit familiar LOL
As a newbe: some extra questions
You explain clear & idiot-proof, until I came along...
So as a newbe I have a few extra questions.
1. I have a new Xperia Ray 4.0.2.A.0.62 / 2.3.4 / ST18i out of the box. You mention OTA - update is recommended, as I already have 4.0.2.A.0.62; is that ok?
2. You mention You must unlock your bootloader, do you mean go to the offical Sony-Ericsson site and unlock bootloader the "official way"? (I have done this)
3. Which Flashtool, do you mean in point 4? And where can I find it/ download this flashtool?
4. After Unlocking the bootloader & Rooting my xperia ray, I believe I can remove bloatware like (wisepilot-trial, tetris-demo, facebook, topapps, etc.). But: what do I do to remove an app? Do I simply remove \system\apps\chinesetextinput.apk or do I have to uninstall it somehow like a computerprogram?
5. After rooting the system directory continues accessible? Is there a way to protect it again, after the removal of the bloatware? (my goal is just to remove the bloatware)
I hope my questions are not to dumb? With my first smartphone just for a couple of weeks I am a real newbe.
robertos37 said:
You explain clear & idiot-proof, until I came along...
So as a newbe I have a few extra questions.
1. I have a new Xperia Ray 4.0.2.A.0.62 / 2.3.4 / ST18i out of the box. You mention OTA - update is recommended, as I already have 4.0.2.A.0.62; is that ok?
2. You mention You must unlock your bootloader, do you mean go to the offical Sony-Ericsson site and unlock bootloader the "official way"? (I have done this)
3. Which Flashtool, do you mean in point 4? And where can I find it/ download this flashtool?
4. After Unlocking the bootloader & Rooting my xperia ray, I believe I can remove bloatware like (wisepilot-trial, tetris-demo, facebook, topapps, etc.). But: what do I do to remove an app? Do I simply remove \system\apps\chinesetextinput.apk or do I have to uninstall it somehow like a computerprogram?
5. After rooting the system directory continues accessible? Is there a way to protect it again, after the removal of the bloatware? (my goal is just to remove the bloatware)
I hope my questions are not to dumb? With my first smartphone just for a couple of weeks I am a real newbe.
Click to expand...
Click to collapse
1. No problem.
2. No problem.
3. Fastboot Tools : Download
4. I delete some application from system\apps, also "chinesetexinput & japanes..."
5. I can't find this application from system\apps!
Success !
Love u mate !
Of all the methods , this worked as told to perfection !
But i skipped the CWM install . this is no problem right ?
GKumaran said:
Love u mate !
Of all the methods , this worked as told to perfection !
But i skipped the CWM install . this is no problem right ?
Click to expand...
Click to collapse
I test all CWM version... still not found to the best version!
so... This is no problem!
Rooted
@Vagrik:
Tried it, done it, and got rid of facebook!. With "bloatware" I meant all the unwanted (cr)apps. Offcourse: chinese is gone too. Thanx.
@others:
I used the root, I had to try & see, a little bit of knowledge about ancient msdos helpt me.
First I was confused about placing the zip on the sdcard & the fastboot on my computer, but step by step it just worked out fine.
So I did use the step by step tutorial, including Fastboot, CWM, after that superuser & titanium backup. With titanium backup you can backup all apps; and uninstall the (cr)apps one by one. (I am glad I made a backup first...).
In the end: rooting was easier than the login at this forum... !!! I must have tried a hundred times to finally place this message!
Got one question left: does anyone know the apps connected to "latitude","places", "navigation"; it seems all google; but which apps exactly ?
When u install maps; places, latitude and navigation get installed along with maps
Hello, the tutorial is great but I have may questions.
Download rootxperia.zip here and place it in your sd card
there's two folders in the rootxperia.zip do I unzip the contents of rootxperia.zip in to my sd card or just place the rooxperia.zip in to sd card?
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
You mean create folder in flashtool folder? could you explain in detail this part?
mrpeer_1 said:
Hello, the tutorial is great but I have may questions.
Download rootxperia.zip here and place it in your sd card
there's two folders in the rootxperia.zip do I unzip the contents of rootxperia.zip in to my sd card or just place the rooxperia.zip in to sd card?
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
You mean create folder in flashtool folder? could you explain in detail this part?
Click to expand...
Click to collapse
Only ZIP file, not content or unzip!
no... np...
Is it possible to work with sk17???
I have a Xperia U --- OS :Android :- ICS 4.0.4 (stock)
(unroot & locked bootloader) build number :- 6.1.1.b.1.54 (stock)
kernel :- 3.0.8+.... (stock)
my phone not root or unlock the bootloader ,but i want to install a jellybean stock rom by DevSwift1 .I download the flashtool and install it and the drivers,i download the rom,how do i do next steps,i found that i can`t root my phone via flash tool with this firmware(6.1.1.b.1.54 ) it said i have to flash a 6.1.1.b.1.10 kermel to root,and rom install instruction said flash another kernel to install the rom (http://forum.xda-developers.com/show....php?t=2326515) .
1) how do i install the CWM recovery,i saw that Xperia u not support the rom mannager app. ?
2) is this [Kernel][Dec 04]Experimental v11a[JB 4.1.2] kernel pre install the cwm recovery ?
3)can i back up my current rom nad stock recovery how ?
4)your thoughts about devswift 1 rom ,i mean is it bug free and stable rom ?
5)tell me how to flash the rom ?
first answer my quetion (please put the numbers) secondly I need step by step, stock rom install guide from root to flash the rom....and don`t tell me just flash,pleas explain it futher,i mean bit more,this is my first time in xda and flashing a rom.(i got the boot unlock key)
guide it should be like this(IT easy to understand)
Eg:-
1)step, Root
> ***********
> ************
2)step, unlock boot loader
> ************
first of all choose a kernel and download it
second unlock your bootloader
after that install zip from sd card
finally choose devswift1 rom if you have problems with those pm me
you will get used to it and install every rom you like
i hope so
Prerequisite: go and unlock your boot loader. By unlocking your boot loader it saves you a lot of time in the future when you're flashing Roms since it will allow you to flash a custom kernel.
1) don't use ROM manager. CWM recovery is built into all custom kernels.
2) look at 1).
3) recovery is built into the kernel. backup can be done through CWM, it is pretty obvious once you are in there (volume for navigation, power for select)
4) I am ex-sony user but I've never touched this ROM but honestly everybody's opinion of a ROM will be different so try out different ones and to you see which is the most bug free and stable. To me I do not care about stuff like WiFi or HDMI because I never use it, but to some people it might be a major problem. So its a bit subjective.
5) instructions are included in the OP. Follow it VERY strictly (remember to flash the kernel, and remember to wipe before installing)
Sent from Nexus 5. Press thanks if I helped
Sent from my Nexus 5 using Tapatalk
The link to the ROM is broken, fix it.
If it's a stock rom you do not need to unlock bootloader just flash stock kernel as said root and install recovery.
So you want to install devswift jb?
Step 1
Unlock your boot loader at http://unlockbootloader.sonymobile.com
Follow the instructions there and unlock it.
Step 2
Download a kernel that includes cwm recovery.
Step 3
Download devswift jb
Step 4
Boot into recovery
Step 5
Follow thread instructions and flash!
Sent from my MT11i
AndroidNoob69 said:
So you want to install devswift jb?
Step 1
Unlock your boot loader at http://unlockbootloader.sonymobile.com
Follow the instructions there and unlock it.
Step 2
Download a kernel that includes cwm recovery.
Step 3
Download devswift jb
Step 4
Boot into recovery
Step 5
Follow thread instructions and flash!
Sent from my MT11i
Click to expand...
Click to collapse
thanks for for your all the help pepole...!
is the 6.1.1.b.1.10 kernel for root purpose only....? this is the jb kernel(http://forum.xda-developers.com/showthread.php?t=2326515) is this built in CWM.....?
xperia anfer said:
thanks for for your all the help pepole...!
is the 6.1.1.b.1.10 kernel for root purpose only....? this is the jb kernel(http://forum.xda-developers.com/showthread.php?t=2326515) is this built in CWM.....?
Click to expand...
Click to collapse
For your info, this kernel is for jb so you need to flash an ICS kernel. If you flash a jb kernel it will end it in brick.
Sent from my MT11i
---------- Post added at 11:39 AM ---------- Previous post was at 11:23 AM ----------
This kernel http://forum.xda-developers.com/showthread.php?t=2299748 has cwm. Install it when you unlocked your bootloader and then download and flash devswift jb.
Sent from my MT11i
AndroidNoob69 said:
For your info, this kernel is for jb so you need to flash an ICS kernel. If you flash a jb kernel it will end it in brick.
Sent from my MT11i
Click to expand...
Click to collapse
that confuse me,do you mean i should not flash this kernel(http://forum.xda-developers.com/showthread.php?t=2326515) even the rom install instruction say flash this kernel...? and with my current firmware (b.1.54) i can not flash via flashtool,thats why ask,do i need to flash b.1.10 kernel (ics) and root my phone and after that flash this kernel,[Kernel][Dec 04]Experimental v11a[JB 4.1.2],(http://forum.xda-developers.com/showthread.php?t=2326515) to install the rom....?
xperia anfer said:
that confuse me,do you mean i should not flash this kernel(http://forum.xda-developers.com/showthread.php?t=2326515) even the rom install instruction say flash this kernel...? and with my current firmware (b.1.54) i can not flash via flashtool,thats why ask,do i need to flash b.1.10 kernel (ics) and root my phone and after that flash this kernel,[Kernel][Dec 04]Experimental v11a[JB 4.1.2],(http://forum.xda-developers.com/showthread.php?t=2326515) to install the rom....?
Click to expand...
Click to collapse
My bad ignore my post unlock and follow devswift instructions sorry
Sent from my MT11i
AndroidNoob69 said:
My bad ignore my post unlock and follow devswift instructions sorry
Sent from my MT11i
Click to expand...
Click to collapse
no i don`t know anything,i just read blogs and xda fourms and find info,i am not sure about those things,i saw your all ready unlock your phone and install a rom,and you are a senior member ,so please....... help me and explain bit more about how to flash a stock rom for xperia u,please help me to flash a stock rom.........!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! don`t say look that thread thats why post a thred on Q & S.
xperia anfer said:
no i don`t know anything,i just read blogs and xda fourms and find info,i am not sure about those things,i saw your all ready unlock your phone and install a rom,and you are a senior member ,so please....... help me and explain bit more about how to flash a stock rom for xperia u,please help me to flash a stock rom.........!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! don`t say look that thread thats why post a thred on Q & S.
Click to expand...
Click to collapse
OK so you first of all, unlock your bootloader.
Then, you visit the devswift's jb thread, download the ROM and the kernel he asked you to flash.
Next, you flash the kernel via fastboot. Now, you boot into recovery and flash the ROM which is now supposed to be in your SD card.
Now you wipe data, cache and dalvik. Then, you flash the ROM. Next you reboot and let it settle.
Actually after unlocking the bootloader you can just follow devswift's instructions and nothing will go wrong.
Sent from my MT11i
AndroidNoob69 said:
OK so you first of all, unlock your bootloader.
Then, you visit the devswift's jb thread, download the ROM and the kernel he asked you to flash.
Next, you flash the kernel via fastboot. Now, you boot into recovery and flash the ROM which is now supposed to be in your SD card.
Now you wipe data, cache and dalvik. Then, you flash the ROM. Next you reboot and let it settle.
Actually after unlocking the bootloader you can just follow devswift's instructions and nothing will go wrong.
Sent from my MT11i
Click to expand...
Click to collapse
sorry i may ask silly question..,but please answer,
do i need to root ? ,or unlocking bootloader automaticaly root my phone ?
xperia anfer said:
sorry i may ask silly question..,but please answer,
do i need to root ? ,or unlocking bootloader automaticaly root my phone ?
Click to expand...
Click to collapse
hey man, you can unlock your bootloader in a simple step, you don't need to install tha sdk to your laptop or pc
you said that you already have a flashtool, and downloaded and installed drivers
note that if you unlock your bootloader the files will be gone (as in all file on phone and internal)
follow this step:
1. go to this site and get the code http://unlockbootloader.sonymobile.com/ (click "start unlocking the boot loader", then click "continue", click "yes i'm sure", check the boxes and click "i accept", enter your name, imei (note: remove the last digit coz its only need 14 digits), enter your email, and later on they will send you for the unlock key, save it safely)
2. open flashtool, connect your device in usb debugging mode, check it on the settings
3. click the BLU at the top at the right of the flashicon
4. later it will ask you to disconnect your device, and power off it
5 reconnect your devicein the usb cable in FLASHMODE. (hold the volume down button while connecting to usb cable)
5. Againconnectt your phone in FASTBOOT mode. (hold volume up while connecting to usb cable)
6. It will prompt a window with your IMEI number, insert your unlock key and click "unlock".
wait to finish and reboot it's done,hope i help you :good:
xperia anfer said:
sorry i may ask silly question..,but please answer,
do i need to root ? ,or unlocking bootloader automaticaly root my phone ?
Click to expand...
Click to collapse
Follow the post above to unlock. By flashing experimental kernel it will root and install cwm. Just unlock and follow what devswift says
Sent from Earth.
I had troubles the first time unlocking bootloader before on my Xperia SOLA the flashtool wasn't working to unlock. If flashtool doesn't work there is another way or other ways(I think) to unlock bootloader which happened to me. As I remembered I used a command on command prompt.
johnwilliam_a_k_a_trash said:
I had troubles the first time unlocking bootloader before on my Xperia SOLA the flashtool wasn't working to unlock. If flashtool doesn't work there is another way or other ways(I think) to unlock bootloader which happened to me. As I remembered I used a command on command prompt.
Click to expand...
Click to collapse
that`s right,i need to try the officail way but nothing works ,and before i flash a kernel i i like to root my phone and back up the imei file ,because i saw that installing a flashing a rom delete that file,i just want to know how to unlock my bot loader and root after that i know how to flash rom... could someone lease help me.....!!!!!!!!!!!
xperia anfer said:
that`s right,i need to try the officail way but nothing works ,and before i flash a kernel i i like to root my phone and back up the imei file ,because i saw that installing a flashing a rom delete that file,i just want to know how to unlock my bot loader and root after that i know how to flash rom... could someone lease help me.....!!!!!!!!!!!
Click to expand...
Click to collapse
Imei is device specific it wont delete but just backup your TA Partition in case you want your DRM keys. What you mean nothing works when you try and unlock bootloader
Sent from Earth.
Unlocking bootloader
Good thing I bookmarked this Youtube link. This is the method I used unlocking my bootloader. Just take note be sure your phone/xperia is one of those phones made in the specific year. Please check the link
http://www.youtube.com/watch?v=iRMDirxUu2A
Good luck!
Just saying don't hold menu when connecting hold VOLUME UP for fastboot and VOLUME DOWN for flash mode
Sent from Earth.
there are alot of youtube videos showing how install roms
Hi someone can give MI guide to root my xperia z5c android 5.1.1 E5823 firmware 32.0.a.6.200 please? Tank to the helpers
N22121991 said:
Hi someone can give MI guide to root my xperia z5c android 5.1.1 E5823 firmware 32.0.a.6.200 please? Tank to the helpers
Click to expand...
Click to collapse
Enable developer options first in your phone, followed to enable OEM unlock and enable USB debugging.
Search on google there is a Sony official site to let you input your IMEI and get the unlock key. You'll need to use fastboot(search on google if you don't know what is it) to unlock via command prompt in Windows, a factory reset will perform after unlocked.
Kernel: http://forum.xda-developers.com/z5-compact/orig-development/kernel-zombie-t3224735
Recovery: http://forum.xda-developers.com/z5-compact/orig-development/twrp-z5-compact-t3235161 (you only need the recovery.img from it)
And then, you just need to "fastboot flash boot boot.img" and "fastboot flash recovery recovery.img" in command prompt to flash custom kernel and custom recovery.
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
At last, "fastboot boot recovery.img" to flash the flashablesu.zip in recovery and install any of busybox utility via Playstore. Upgrade to camera 2.0 via "What's new" if you will install xposed bcoz stock cam 1.0 will FC.
Pretty much that's all of it.
hello
Thanks
Does it work with encrypted device ?
Bear in mind that if you unlock bootloader, your camera will worsen, you will lose image enhancements like x reality and your warranty will be void. Etc. Etc. So you might want to hold off on root. Just letting you know, that is
Sadman Khan said:
Bear in mind that if you unlock bootloader, your camera will worsen, you will lose image enhancements like x reality and your warranty will be void. Etc. Etc. So you might want to hold off on root. Just letting you know, that is
Click to expand...
Click to collapse
i don't totally agree because what i did,well,unlock device's bootloader & everything blah blah blah..but camera seems to be just fine.but of course,you'd definitely can see the difference..now since drm restore for our devices is already available however,it indeed restored the functions and the bravia engine & all(except the drm key itself),i noticed that my rooting status has changed from "unlock bootloader allowed: yes" to unlock bootloader allowed: no"!also,even if says so,my phone still has twrp installed,rooted & a custom kernel..all seems to be working as i so far observed..just that rooting status thing changed..kinda wierd,though!
Arturiuz! said:
i don't totally agree because what i did,well,unlock device's bootloader & everything blah blah blah..but camera seems to be just fine.but of course,you'd definitely can see the difference..now since drm restore for our devices is already available however,it indeed restored the functions and the bravia engine & all(except the drm key itself),i noticed that my rooting status has changed from "unlock bootloader allowed: yes" to unlock bootloader allowed: no"!also,even if says so,my phone still has twrp installed,rooted & a custom kernel..all seems to be working as i so far observed..just that rooting status thing changed..kinda wierd,though!
Click to expand...
Click to collapse
Mine says the same "unlock bootloader allowed: no" but root and everything works fine, and the camera definitely improved although its still crap in my opinion. Have a couple of before and after shots if someone is interested.
Radeon1337 said:
Mine says the same "unlock bootloader allowed: no" but root and everything works fine, and the camera definitely improved although its still crap in my opinion. Have a couple of before and after shots if someone is interested.
Click to expand...
Click to collapse
wait!let me correct myself a little(this is really weird!)..my drm keys are restored,to wc as far as i am knowledgable of,that shouldnt be the case after unlocking the BL..
*apologies here!im still trying to figure out how to insert a screenshot as a proof!i'm just using my phone atm..peace!
Arturiuz! said:
wait!let me correct myself a little(this is really weird!)..my drm keys are restored,to wc as far as i am knowledgable of,that shouldnt be the case after unlocking the BL..
*apologies here!im still trying to figure out how to insert a screenshot as a proof!i'm just using my phone atm..peace!
Click to expand...
Click to collapse
got it!here's for the screenshot before i unlocked my device..then drm keys lost..then when flashed the drmrestore.zip,consecutively..
MystereT said:
hello
Thanks
Does it work with encrypted device ?
Click to expand...
Click to collapse
Did you ever take the plunge with encryption? TWRP supposedly supports encryption, but want to make sure I have a way to a working phone if encryption doesn't work.
Don't remember if I can undo encryption via twrp, or at that point is it just prudent to flashtool it back to a clean image if not? My understanding is really just need to get a kernel on there that will boot, and provide the rest of the system with or without encryption.
Ready to pull the trigger on this to root and try with my encryption, but think I'll pull down a clean version of .200 firmware for the z5c first...
Yesterday there is a way to get Z5/Z5C/Z5P Rec & Root
and revive DRM & BE2 & Camera noise reduction by one-click (need unlocked BL),
I'm afraid to try...
Works like a charm
I can confirm drm-restore patch works like a charm and everything (camera noise reduction etc.)
iMaeGoo said:
Yesterday there is a way to get Z5/Z5C/Z5P Rec & Root
and revive DRM & BE2 & Camera noise reduction by one-click (need unlocked BL),
I'm afraid to try...
Click to expand...
Click to collapse
TheEndHK said:
Enable developer options first in your phone, followed to enable OEM unlock and enable USB debugging.
Search on google there is a Sony official site to let you input your IMEI and get the unlock key. You'll need to use fastboot(search on google if you don't know what is it) to unlock via command prompt in Windows, a factory reset will perform after unlocked.
Kernel: http://forum.xda-developers.com/z5-compact/orig-development/kernel-zombie-t3224735
Recovery: http://forum.xda-developers.com/z5-compact/orig-development/twrp-z5-compact-t3235161 (you only need the recovery.img from it)
And then, you just need to "fastboot flash boot boot.img" and "fastboot flash recovery recovery.img" in command prompt to flash custom kernel and custom recovery.
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
At last, "fastboot boot recovery.img" to flash the flashablesu.zip in recovery and install any of busybox utility via Playstore. Upgrade to camera 2.0 via "What's new" if you will install xposed bcoz stock cam 1.0 will FC.
Pretty much that's all of it.
Click to expand...
Click to collapse
hi Bro! is there any trouble if i flash (obviously via fastboot) only the recovery over the stock kernel firmware .200?? or is mandatory flash kernel and recovery?
thanks!
acabreram said:
hi Bro! is there any trouble if i flash (obviously via fastboot) only the recovery over the stock kernel firmware .200?? or is mandatory flash kernel and recovery?
thanks!
Click to expand...
Click to collapse
Stock kernel will get a bootloop if you rooted. The current build of Z5c kernel got dm-verity, when it detect your /system has changed like flashed flashablesu.zip to attempt to root probably it will not boot. You need a custom insecure kernel to root.
TheEndHK said:
Stock kernel will get a bootloop if you rooted. The current build of Z5c kernel got dm-verity, when it detect your /system has changed like flashed flashablesu.zip to attempt to root probably it will not boot. You need a custom insecure kernel to root.
Click to expand...
Click to collapse
ok Bro thanks!! there is not custom kernel of firmware .200 yet right?
acabreram said:
ok Bro thanks!! there is not custom kernel of firmware .200 yet right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=64849573&postcount=2
plz read it clearly
can someone share stock E5823 fw .200 kernel, I need it to test this method
Help
TheEndHK said:
Enable developer options first in your phone, followed to enable OEM unlock and enable USB debugging.
Search on google there is a Sony official site to let you input your IMEI and get the unlock key. You'll need to use fastboot(search on google if you don't know what is it) to unlock via command prompt in Windows, a factory reset will perform after unlocked.
Kernel: http://forum.xda-developers.com/z5-compact/orig-development/kernel-zombie-t3224735
Recovery: http://forum.xda-developers.com/z5-compact/orig-development/twrp-z5-compact-t3235161 (you only need the recovery.img from it)
And then, you just need to "fastboot flash boot boot.img" and "fastboot flash recovery recovery.img" in command prompt to flash custom kernel and custom recovery.
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
At last, "fastboot boot recovery.img" to flash the flashablesu.zip in recovery and install any of busybox utility via Playstore. Upgrade to camera 2.0 via "What's new" if you will install xposed bcoz stock cam 1.0 will FC.
Pretty much that's all of it.
Click to expand...
Click to collapse
Hello, tks by the step by step u did... Sorry by my poor english, i am braziliam and need little help here.
1 - My z5c already is unlocked;
2 - I download the zombie kernel like u said (ok, get the boot.img file);
3 - I try to download the recovery, but when open the 7zip on windows cannot unzip the recovery.img file;
4 - Try to download this one (TWRP for Z5C) and ok, i get the recovery.img file from this (this is the same recovery file ???).
So the questoin is:
I can flash this files above (boot and recovery) on my z5c - E5823 - 32.0.A.6.200 ????
And why not flash the boot.img from the recovery zip file ??? Whats the diference ???
Regards and tks again !!!
puiatmp said:
Hello, tks by the step by step u did... Sorry by my poor english, i am braziliam and need little help here.
1 - My z5c already is unlocked;
2 - I download the zombie kernel like u said (ok, get the boot.img file);
3 - I try to download the recovery, but when open the 7zip on windows cannot unzip the recovery.img file;
4 - Try to download this one (TWRP for Z5C) and ok, i get the recovery.img file from this (this is the same recovery file ???).
So the questoin is:
I can flash this files above (boot and recovery) on my z5c - E5823 - 32.0.A.6.200 ????
And why not flash the boot.img from the recovery zip file ??? Whats the diference ???
Regards and tks again !!!
Click to expand...
Click to collapse
because it's only meant to be flashed in/by fastboot mode through command prompt or cmd.flashing it using recovery won't install those img's..not unless those were re/packed that could also be flashed through recovery..i've tried it but gave me error. & it's better that way installing it through command prompt/fastboot mode.
Arturiuz! said:
because it's only meant to be flashed in/by fastboot mode through command prompt or cmd.flashing it using recovery won't install those img's..not unless those were re/packed that could also be flashed through recovery..i've tried it but gave me error. & it's better that way installing it through command prompt/fastboot mode.
Click to expand...
Click to collapse
hey friend, tks for response.
I know we need to use fastboot to flash this files and i know how to do this.
I only wanna know if the files are compatible with my model and version device.
puiatmp said:
hey friend, tks for response.
I know we need to use fastboot to flash this files and i know how to do this.
I only wanna know if the files are compatible with my model and version device.
Click to expand...
Click to collapse
yes! it's(actually)for E5823 devices to be specific & as per OP(even as i have checked the links)..it even worked on mine wc is E5803! might want try it out first & see for yourself!