Device : Karbonn Smart Tab 10
Problem : Hard Bricked
I have been trying to upgrade my ST 10 to custom rom available in this forum. But after update, tab was stuck in Red Boot Logo Screen. Then I tried many things but no success. Finally something went wrong and not device is not even responding to power switch.
Then I found on google that AMLOGIC flash tool can flash and restore tab. By hit and trial methods ... now i am able to connect my tab to PC and AMLOGIC flash tool detects it.
Device Manager of my Windows7 shows Tab as WORLDCUP DEVICE. But I am not able to go further from here as I dont have correct zip with some config xml file.
Please help.
Maybe I am using wrong software to flash (AMLOGIC). Then suggest better one along with files required.
Please Help !!
(Bump)
Karbonn tab 10
if you find any way please tell me because my karbonn tab 10 hard bricked and its not turn on i have using amlogic method but it says cannot find disk please help
Any luck?
Hey, my younger brother bricked his ST10 recently... Any luck in unbricking it? I can't even get to installing the drivers so that the tab shows as worldcup device in the device manager... I can only see Android ADB interface in the device manager (Running windows 10) and in Devices and Printers I see the device as "Velox"...
Hi, were you able to find any solution to your 'deep brick' of Karbonn S10? I'm facing the same issue with my Karbonn tab-8 velox.
Related
Hello
I have a Chinese tablet " INTEX AVATAR" android ICS 4.0.4 firmware rockchip which is bricked. Happens when I try to update it with a new firmware. Over identify it as unknown device but manage to fix it and now it shows RK29 device, the problem now is when I try to update it, it show an error, Prepare IDB Fail. Can't set it to recovery, I try CMW boot using sd card too no success.
Any help please
freemega said:
Hello
I have a Chinese tablet " INTEX AVATAR" android ICS 4.0.4 firmware rockchip which is bricked. Happens when I try to update it with a new firmware. Over identify it as unknown device but manage to fix it and now it shows RK29 device, the problem now is when I try to update it, it show an error, Prepare IDB Fail. Can't set it to recovery, I try CMW boot using sd card too no success.
Any help please
Click to expand...
Click to collapse
I have the same problem with a romanian tablet. Evolio Evotab 2. it has the Rockchip RK29 and i bricked it and now it wont power up,won;'t do anything. On windows 7 is shows like USB Device Not recognized.I tried every rk29 driver i could find but no luck. It won't even install them and it says that the best driver for your device is already installed. But no driver is installed.
Can someone help me?
Intex RK2918 based tab
I'm having an INTEX iTab. How did you update the tab? If it is an official update you'll have to take the tab to INTEX Service Center. There's no Intex PC Suite available at present,so you can't update it over internet. But, you can flash new ROMs to the tab. Refer to INTEX iTab thread. It may contain something useful. Or ask OMA if you want to flash custom ROMs.
How to root please?
Also, anyone know how to reflash this models firmware?
I think I stuffed 1 of them up trying to root.
Attached is a picture of the model.
Thank you. Have a nice day.
Hi there !
I have started a new thread on how to root spreadtrum devices here: http://forum.xda-developers.com/showthread.php?t=2165554
May be you could find a way to root yours.
I also need you to test an idea to root them, but I'm not sure if it will work.
Because you already have a bricked one, you can try this idea without risking your device (and maybe unbrick it by doing a backup of the others one and flashing this backup on it.)
How have you bricked it precisely ?
Spreadtrum SC6820
ElectronikHeart said:
Hi there !
I have started a new thread on how to root spreadtrum devices here: http://forum.xda-developers.com/showthread.php?t=2165554
May be you could find a way to root yours.
I also need you to test an idea to root them, but I'm not sure if it will work.
Because you already have a bricked one, you can try this idea without risking your device (and maybe unbrick it by doing a backup of the others one and flashing this backup on it.)
How have you bricked it precisely ?
Click to expand...
Click to collapse
Hi there, I recently got my hands on a Mobicel Titan, and after much unclear research, the best I can come up with is that it is a Spreadtrum SC6820a phone, hope I am on the right track. Anyway, my goal is to change the ROM on this phone as the software that Mobicel has bundled on their version of Android is way too much for the phone to handle. I have already rooted the phone using Z4Root successfully. Funny enough, the link you have is the very link I tried for the past week, I've tried ADB and Fastboot on both Windows 8 64bit and Ubuntu 12.10 64bit, and even ResearchDownload, all drivers were installed successfully, but when i try all methods to flash new ROM to the device, nothing seems to happen, even if I use ResearchDownload and follow instructions to the T, flash process doesn't start. After using fastboot to update CWM from Ubuntu 12.10, if I try to restart into recovery mode, it is then stuck on the Mobicel Logo. Is there a guide for the Mobicel Titan?
Hello guys, i need your help.. I have an rk2918 tablet, its name is teclast p85a and i bricked it.. anyway i have installed a couple of roms but none of them worked(actually the 2nd one turned the screen into grey but that all)..anyway i plugged in my tablet but now my computer detects it as an Full AOSP rk29sdk device and not as RK29 device(which it was before i installed these roms). Now when i go to device manager in order to update the software and put rockusb.inf for windows 7-64 bit i get this error: Make sure you have selected the correct firmware for your operating system(windows 7-64bit) WHICH IS WHAT I DO..So now RKbatchtool doesnt recognize my tablet and i cant flash it with any rom... Does anyone know what to do?? Please i am completely lost.. Thanks in advance!!
Hi guys,
I just bought two brandnew Cube U27GT S (MTK 8127) tablets and tried to install a custom rom. Unfortunately the tab hard bricked while trying to flash it with SPFT. Now I can´t turn on the tab anymore - all black. I even can´t open the recovery mode and Win 7 doesn´t found the tab anymore, it shows unknown device in the device manager!?
Meanwhile I deinstalled all MTK drivers with usbdeview and installed them again with the help of the second tab. But it has no effect of the damaged one it´s still an unkown device.
Maybe anyone has an idea how to unbrick it? Would be great to get any help! :crying:
No hope anymore?
I have the same problem can only get into recovery, factory reset does seem to do anything still hangs on boot, looks like I need to update via sdcard?
Hi guys please I really need your help
My Alcatel Pop 4 plus is hard bricked and i can't seem to fix it.
I tried using SP Flash Tool but when I connect the phone it appears as qhsusb_bulk driver.
I really need to fix it . Please what are your suggestions?
If anyone has the same phone (Alcatel Pop 4 plus 5056A) could you make a backup of your system and send to me so I use recovery mode to restore my phone.
This is the firmware you are looking for, buddy you know how to root this phone you have?
Page firmware: tochomorocho.net/2018/04/firmware-rom-stock-alcatel-ot-pop-4-plus-5056a.html?m=1