Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Solved...
I'm sorry to have bothered you all.
It's strange.. but i changed the usb cable (that works perfect with my phone) and tablet was seen from the rockchip flasher..
Really sorry.
Thx.
Help
figus77 said:
Hi guys, after installing chainfire3d and reboot the device it win't start any more, it stop on teclast logo, rockchip flash tool don't recognize the device that in windows is seen as adb device..for some strange reason if i look at the device details it will be recognized as an htc?? I can start in recovery mode (the one with the little android ko with a red "!")
I really don't know what to do now.. someone with a brillant idea and some more experience than me can help in a flash with some other tool? or if exist an emergency flash from sd..
Thank you!!
Click to expand...
Click to collapse
Hello, how did you solve it? Please any help will do.
Device : Karbonn Smart Tab 10
Problem : Hard Bricked
I have been trying to upgrade my ST 10 to custom rom available in this forum. But after update, tab was stuck in Red Boot Logo Screen. Then I tried many things but no success. Finally something went wrong and not device is not even responding to power switch.
Then I found on google that AMLOGIC flash tool can flash and restore tab. By hit and trial methods ... now i am able to connect my tab to PC and AMLOGIC flash tool detects it.
Device Manager of my Windows7 shows Tab as WORLDCUP DEVICE. But I am not able to go further from here as I dont have correct zip with some config xml file.
Please help.
Maybe I am using wrong software to flash (AMLOGIC). Then suggest better one along with files required.
Please Help !!
(Bump)
Karbonn tab 10
if you find any way please tell me because my karbonn tab 10 hard bricked and its not turn on i have using amlogic method but it says cannot find disk please help
Any luck?
Hey, my younger brother bricked his ST10 recently... Any luck in unbricking it? I can't even get to installing the drivers so that the tab shows as worldcup device in the device manager... I can only see Android ADB interface in the device manager (Running windows 10) and in Devices and Printers I see the device as "Velox"...
Hi, were you able to find any solution to your 'deep brick' of Karbonn S10? I'm facing the same issue with my Karbonn tab-8 velox.
Hello guys, i need your help.. I have an rk2918 tablet, its name is teclast p85a and i bricked it.. anyway i have installed a couple of roms but none of them worked(actually the 2nd one turned the screen into grey but that all)..anyway i plugged in my tablet but now my computer detects it as an Full AOSP rk29sdk device and not as RK29 device(which it was before i installed these roms). Now when i go to device manager in order to update the software and put rockusb.inf for windows 7-64 bit i get this error: Make sure you have selected the correct firmware for your operating system(windows 7-64bit) WHICH IS WHAT I DO..So now RKbatchtool doesnt recognize my tablet and i cant flash it with any rom... Does anyone know what to do?? Please i am completely lost.. Thanks in advance!!
Hello all, I have managed to brick my Atongm H8, I was trying to change the recovery. Phone now does not boot or turn on or go to recovery but when connected via usb to windows I do get the Mediateck preloader portXX come up in device manager which is positive I think.
I used SP tools to break it, I hope I can use it to fix it, does anyone have a backup or stock rom or any suggestions of how to fix my poor phone ?
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine