Related
I have tried to reboot to recovery via Rom Manager now my ace doesn't start anymore, the sceen is black, even when usb is pluged in
can anyone help me?
Just start to download mode an try flash firmware... follow flash tutorial...
to flash another rom, the phone must start
it doesn't matter whitch buttons are pressed, nothing happend
So read how to unbrick galaxy ace...
doesn't work :'(((((((((
try to remove th battery and thec klick ok+vol down +power and when you doing that connect the battry again
it worked with me
P1tt187 said:
I have tried to reboot to recovery via Rom Manager now my ace doesn't start anymore, the sceen is black, even when usb is pluged in
can anyone help me?
Click to expand...
Click to collapse
Well you mest up with rom manager without any knowledge about it. AFAIK Your phone is now fully brick. You need to replace your motherboard(GOOD LUCK WITH WARRANTY )
Sent from my GT-S5830 using Tapatalk
If Flashing and Unbrick not working, what ever you do or how you try, then you probably messed up your boot ROM and it´s BRICKED. SORRY FOR YOU, but always, I MEAN ALWAYS read and search the forum 10 TIMES, before you start up messing your phone. It can very yeasely BRICKED.
I hope you can change it from service for free. Say that you trying restore to FACTORY setting(just make up some story[believable], why you was need to restore to FACTORY settings). Maybe they belive you and change your BRICKED phone to new one. Thumbs up for you and dont do anything stupid next time!!!
P1tt187, just out of curiosity - how did you even do that?
When I tried to use ROM Manager it told me to install the correct drivers, but Galaxy Ace isn't supported, so I just resigned. Which drivers did you use?
P1tt187 My friend had the same thing, he used a ROM Manager to back up the ROM in the ACE. Identical symptoms. Only the Samsung service will help. Tell him that you turned off phone and not turn on (Phone) . Samsung Service exchanged him motherboard in ACE (on guarantee).
Galaxy Ace not supported yet by ROM manager! Sorry for you but search the forum(or just GOOGLE it) before trying something first. There is always GOOGLE to helping(if you not found it here). Just USE it!
I have rooted and customized all my phones(HTC, SAMSUNG), JAILBREAKED AND UNLOCKED all my IPhones(3G and 4G), just waste some time, for GOOGLE! But you must be patient. Everything is not coming in first search(but everything is there, TAKE THE TIME and be sure for right thing).
CHEERS!
Hey,
I just have the same problem, but I didn't touch to the ROM or anything else
I just rooted my phone with SuperOneClick, turn it off and it never turn on again...
Since my phone is rooted, I don't know if the warranty is lost, but I think so...
I already tried to remove the battery and then put it back while holding ok + volume down + power, but it didn't work, the screen stays completely black...
I'll let my phone rest a few days and then send it to Orange while I pray --'
Any other idea guys ?
( sorry for my bad english...)
raphdu57 said:
Hey,
I just have the same problem, but I didn't touch to the ROM or anything else
I just rooted my phone with SuperOneClick, turn it off and it never turn on again...
Since my phone is rooted, I don't know if the warranty is lost, but I think so...
I already tried to remove the battery and then put it back while holding ok + volume down + power, but it didn't work, the screen stays completely black...
I'll let my phone rest a few days and then send it to Orange while I pray --'
Any other idea guys ?
( sorry for my bad english...)
Click to expand...
Click to collapse
Try to reflash with original version. Read this and try:http://forum.xda-developers.com/showthread.php?t=1034145
or try to unbrick it, here:http://forum.xda-developers.com/showthread.php?t=1071970
I'v tried to unbrick my phone, but it stucks on Odin at <1> setup connection..
I've let it run for 1 hour, but nothing changes
On the thread you gave me someone say that there is no solution for that...
What I don't understand is that I neither Flashed or tried to change the Rom of my phone, I only rooted it with SOC...
Anyway thanks for the help, I'll send it to Orange in a few days...
raphdu57 said:
I'v tried to unbrick my phone, but it stucks on Odin at <1> setup connection..
I've let it run for 1 hour, but nothing changes
On the thread you gave me someone say that there is no solution for that...
What I don't understand is that I neither Flashed or tried to change the Rom of my phone, I only rooted it with SOC...
Anyway thanks for the help, I'll send it to Orange in a few days...
Click to expand...
Click to collapse
Of course I dont know what you exactly done or not but if its stuck in black screen and cant flash with ODIN, then I think its TOTALLY bricked. Sorry for you, hope you get it changed to new one! THUMBS UP FOR YOU!
My apologies if this post is already started elsewhere (please guide me there if you can), but it seem the search is not possible today...
I rooted my brand new Vodafone Smart 2 and in order to free some memory I was moving some files from internal to SD card. Noticing a folder in the root called custpack (and thinking it was the specific folder Vodafone used for its teaking) I wanted to play around with it on my computer, but instead of copying it to SD card, I MOVED it... :0 At the first command the screen turned gray and the phone froze. I can turn it off now only by removing the battery. When it starts it can't go pass the android logo (boot image) and the screen turns gray. I know that Power button and Volume Down yield to Recovery menu, but my ROM is branded Vodafone Albania and they have removed that option. All I get is the option for factory reset (or I think that is what "All you data will be lost, Yes/No" means). Accepting that does restart the phone but still the same logo and gray screen afterwards.
Unfortunately, I can't install from SD due to this branded Vodafone AL ROM I have, and adb device command at the command prompt (DOS) does not recognize the phone (it did recognize before as I have the drivers loaded and Android SDK Tools).
Can someone help me either bringing the Recovery option to install from SD so I can try a complete flash of the original, or if there is any way I can have the adb recognise the device, or if there is any other way. I found a user here (Voda_Smart_2) that seemed to have the same problem and someone had said could help but only through PM. I tried to reply the thread so I could present my case, but as a newly registered I was not allowed to post on developers forums.
PLEASE HELP ME - For someone who uses a low-end phone like Vodafone Smart II option to buy a new one after ruining a new one is not possible....
Don
Go to
roeddie.blogspot.com
Ota update 3
U will find there The Solution !
Enjoy
Sent from my Vodafone Smart II using Tapatalk 2
Do you still have the problem?
I can help you if you need because I had the same problem before.
i have this problem with vodafone smart 2, it is stuck at boot logo ( the green android robot), how can i fix it?
when i try to connect him to pc, the pc doesn't detect him anymore and when i plug in the charger remain stucked at android logo too without showing the battery status charging.
this happend after i tried to flash recovery on it.
phenomenalxp said:
Go to
roeddie.blogspot.com
Ota update 3
U will find there The Solution !
Enjoy
Sent from my Vodafone Smart II using Tapatalk 2
Click to expand...
Click to collapse
Thank you for interest and concern for my situation! I know very well roeddie custom rom for VS2. I have actually installed version 0.9.1 as well as version 0.9.9 to some friends. I have the undestanding that the AIO he uses requires that the phone be recognized by the PC (adb devices does not list anything in my case). However, I'll give it a try and let this forum know if roeddie AIO flasher (OTA update 3) does install without the need for PC to recognize the android phone.
Thanks,
Don
jiandroid said:
Do you still have the problem?
I can help you if you need because I had the same problem before.
Click to expand...
Click to collapse
Yes, I still have a problem with my VS2/V860 - stuck at boot logo without fastboot. I can't seem to find a way how to get it recognized. Can you help me? It would be really helpful since now my brother has the same problem after trying to flash latest roeddie mod (June 1, 2013).
Don
jiandroid said:
Do you still have the problem?
I can help you if you need because I had the same problem before.
Click to expand...
Click to collapse
I've got that problem too, can anyone help us please?
Recovery
U need full recovery
http://forum.xda-developers.com/showpost.php?p=40506492&postcount=2
Fastboot mode not recognized by computer...
atha959 said:
U need full recovery
http://forum.xda-developers.com/showpost.php?p=40506492&postcount=2
Click to expand...
Click to collapse
Thanks for your consideration! My problem is that my phone is not recognized in fastboot mode by the computer. I have installed Android SDK and updated regularly. Without fastboot (see bullet no. four following your link) I can not do anything Alberto96 suggest.
Any other insight?
Don
i ve got the same problem with my V860.....does anyone know a way to de-brick our phone?
or anyone found out something???
tnx in advance!
Vodafone Smart 2 device can't start code 10 error
I have the same problem any help..?
dead battery is the answer
well guys if anyone of you still use this device; a possible fault that causes infinite boot logo screen is dead battery. Actually the controller board of the battery gets shorted causing a stable 1.7v output instead of 3.8~4.2v and refuses to charge even pushing power to it from an external power supply. Thats why the phone stucks on logo; it is the same reaction to connecting the phone to the charger without a battery... what you have to do is to find a used or a new battery (if it's still worth to do so...)
dizzytransistor said:
well guys if anyone of you still use this device; a possible fault that causes infinite boot logo screen is dead battery. Actually the controller board of the battery gets shorted causing a stable 1.7v output instead of 3.8~4.2v and refuses to charge even pushing power to it from an external power supply. Thats why the phone stucks on logo; it is the same reaction to connecting the phone to the charger without a battery... what you have to do is to find a used or a new battery (if it's still worth to do so...)
Click to expand...
Click to collapse
Thanks for the suggestion! It is not a problem of battery, as I have tried with two other batteries from friends' V860. Plus, if it is a board circuit then it does not matter if the we change the battery, unless with 'board' you mean the way batteries are connected inside the battery pack.
Thanks once again! Your answer is much appreciated! Keep them coming if you think about something else. I still have this phone, just for because I like to know what was the problem or how to overcomes such situations in the future.
I need some help, a few days ago y flashed SlimSaber on my phone, everything was ok until this morning, when i woke up the phone was off, when i truned on it got stuck on the samsung logo screen, then i tried to start it in Download mode, connected to the pc opened ODIN and tried to flash a stock rom, for some reason the phone got disconected in the middle of that, after that i tried again and this time it finished but said FAIL then i unplugged the phone tried to restart it but nothing happened now i can´t even get to download mode the phone is just there i can't turn it on and i don't know what to do, i need help plz
If the phone won't boot at all, what exactly do you expect anyone here to suggest ? No Christmas miracle.
Service centre for motherboard replacement (expensive option) or source 2nd hand board from 'donor' phone (search online) & either replace yourself or pay a local mobile repair shop to do it (cheaper option).
volkstilo said:
I need some help, a few days ago y flashed SlimSaber on my phone, everything was ok until this morning, when i woke up the phone was off, when i truned on it got stuck on the samsung logo screen, then i tried to start it in Download mode, connected to the pc opened ODIN and tried to flash a stock rom, for some reason the phone got disconected in the middle of that, after that i tried again and this time it finished but said FAIL then i unplugged the phone tried to restart it but nothing happened now i can´t even get to download mode the phone is just there i can't turn it on and i don't know what to do, i need help plz
Click to expand...
Click to collapse
Try to use JIG, but you don't assure you nothing. The assistance will find out for sure that you have installed a cooked ROM and you will pay a lot for a simple replacement. And then I advise you to follow the many guides available online to disassemble and reassemble the pieces of the Galaxy S2. Let me know
thanks for the help but at this point I think i'll buy another celphone I'm thinking on the galaxy grand or the galaxy win
volkstilo said:
thanks for the help but at this point I think i'll buy another celphone I'm thinking on the galaxy grand or the galaxy win
Click to expand...
Click to collapse
Don't worry, i understand you. However consider the purchase of Moto G!
thanks for the tip marco i'll definetly go for the moto G
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
You don't need to discharge it..
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
panagiotisden2 said:
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
Click to expand...
Click to collapse
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
ByN3r0 said:
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
Click to expand...
Click to collapse
Are you sure that your battery is FULLY uncharged?
panagiotisden2 said:
Are you sure that your battery is FULLY uncharged?
Click to expand...
Click to collapse
my download mode isn't working in any way, i think i should sent it for repair
Thanks !
Thank you !
shalev1418 said:
Thank you !
Click to expand...
Click to collapse
you're wellcome
Did you unbriced your phone easy?
panagiotisden2 said:
you're wellcome
Did you unbriced your phone easy?
Click to expand...
Click to collapse
YUP!
shalev1418 said:
YUP!
Click to expand...
Click to collapse
Ok thank you. Im glad my method works
bartvp said:
my download mode isn't working in any way, i think i should sent it for repair
Click to expand...
Click to collapse
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
deviato said:
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
Click to expand...
Click to collapse
Ιm glad i helped enjoy your phone
bartvp said:
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
Click to expand...
Click to collapse
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
panagiotisden2 said:
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
Click to expand...
Click to collapse
I don't know. I read somewhere that it costs around $30-50. But maybe my warranty isn't void, because they can't check (maybe) my phone is rooted, so it costs nothing.
The only thing I can do is waiting and waiting...
---------- Post added at 07:04 AM ---------- Previous post was at 06:53 AM ----------
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
I will never do this . You only brick it harder i think
HI!
I have D620r. I tryed fw update with LG MobileSupportTool. It stuck at 2, or 3%, never goes up!!
Now, when I try power up, it show only: fastboot operation. I don't have download mode.
I left battery 0%, but this metod don't work too...
It is possible flash stock fw in fastboot mode, or it is bricked?
REQUEST: Can someone who have a bricked device record a video unbricking it with me method, so more users can easily unbrick their devices too just by watching the video tutorial?
Thanks
I tried
I tried to follow your steps but i can go download mode the smartphone start to charge :crying:
help pls
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
chacks1 said:
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
Click to expand...
Click to collapse
It's not possible. If you try, ROM's filesystem will replace the files you are using, making the device unusable (soft-bricked).
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??