Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
You don't need to discharge it..
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
panagiotisden2 said:
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
Click to expand...
Click to collapse
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
ByN3r0 said:
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
Click to expand...
Click to collapse
Are you sure that your battery is FULLY uncharged?
panagiotisden2 said:
Are you sure that your battery is FULLY uncharged?
Click to expand...
Click to collapse
my download mode isn't working in any way, i think i should sent it for repair
Thanks !
Thank you !
shalev1418 said:
Thank you !
Click to expand...
Click to collapse
you're wellcome
Did you unbriced your phone easy?
panagiotisden2 said:
you're wellcome
Did you unbriced your phone easy?
Click to expand...
Click to collapse
YUP!
shalev1418 said:
YUP!
Click to expand...
Click to collapse
Ok thank you. Im glad my method works
bartvp said:
my download mode isn't working in any way, i think i should sent it for repair
Click to expand...
Click to collapse
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
deviato said:
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
Click to expand...
Click to collapse
Ιm glad i helped enjoy your phone
bartvp said:
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
Click to expand...
Click to collapse
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
panagiotisden2 said:
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
Click to expand...
Click to collapse
I don't know. I read somewhere that it costs around $30-50. But maybe my warranty isn't void, because they can't check (maybe) my phone is rooted, so it costs nothing.
The only thing I can do is waiting and waiting...
---------- Post added at 07:04 AM ---------- Previous post was at 06:53 AM ----------
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
I will never do this . You only brick it harder i think
HI!
I have D620r. I tryed fw update with LG MobileSupportTool. It stuck at 2, or 3%, never goes up!!
Now, when I try power up, it show only: fastboot operation. I don't have download mode.
I left battery 0%, but this metod don't work too...
It is possible flash stock fw in fastboot mode, or it is bricked?
REQUEST: Can someone who have a bricked device record a video unbricking it with me method, so more users can easily unbrick their devices too just by watching the video tutorial?
Thanks
I tried
I tried to follow your steps but i can go download mode the smartphone start to charge :crying:
help pls
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
chacks1 said:
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
Click to expand...
Click to collapse
It's not possible. If you try, ROM's filesystem will replace the files you are using, making the device unusable (soft-bricked).
Related
ok. i;ve done it.
i tried to install v10c europe unbranded and kdz updater gave me a param error and now my phone is completly dead. it doesnt start at all.
can i recover it somehow?
kdz updater doesn't see it any longer.
Does it show anything at all. Does the screen display the LG or android logo?
Try the hard reset. Press Vol down+Home+PowerButton till you see the LG logo come up. If things are fine then the phone should reset itself to original state.
Best of Luck.
BTW, did you again flash in CDMA and DIAG mode?
it doesnt start at all.
i dont know how to enter emergency mode.
it doesnt hard reset or anything. it looks dead.
i flash in 3g and diag.
Pretty strange that nothing comes up.
Just to experiment, when you plug in the charger (AC) does the phone begin to charge (do you seen the battery indicator come up).
And hopefully someone more experience will turn up and help you. I really don't have much idea...
I think you will find this useful http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
Remove battery and leave it few hours without it. After that run KDZ_UPD, configure (i think 3gs, diag, select FW - look on some how-to) without battery plug USB and press vol down+home and power on and still hold untill recovery appear. Then still try connect via KDZ.
I hope, that it will wokrs.
i will try to keep the battery out for a few hours.
i've tried to connect without battery and keep the buttons to start but with no luck.
the phone looks dead!
how can i enter emergency mode?
Is it start? Or if you press power button, is something happened or dipslay of phone is just black? If so, then probably nothing will help and you will have to send it to warranty service.
absolutly nothing happens. no power at all. not even when i plug in the charger.
will lg fix it for me? it was bought on 15 december this year, it has 3 days.
can they see that i have tried to flash another rom?
well that is why I don't play around with the kdz updater.
everyone ends up with their phone bricked at some point.
Try to get in emergency mode back+up volume+power.
Tell me if it works.
it doesnt get in emergency mode.
I had same problem with mine P500.I was tried to update to v10d something went wrong I got some errors and after few more tries my phone was completely dead.I was lucky and my phone was changed by operator.
I did some research before carrying it back to operator and it seems that the only way to resurrect phone is JTAG.But how to do it i have no idea if it can be done at all.
You can find some info here wiki.cyanogenmod.com/index.php?title=JTAG_for_Dream/Magic[/url
If emergency mode doesn't work....(wait for someone with more exp to post :/ )
Kdz updater working fine. I try 3 different fw and have no problem.
Sent from my LG-P500 using Tapatalk
Same as me. I flashed 2-tikes without any problema.
Sent from my LG-P500 using XDA App
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Hi i have got the same problem, you have solved? next week I go for assistance, we hope .. even if I pay ..
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Since you were flashing with original LG firmware, they shouldn't raise much issue. Just don't tell them that you used the KDZ updater....
BTW did you try the CS_Emergency under Phone Mode in the KDZ updater.
also dont give them the guilty look
the phone is completly dead, not detected by computer, even when i plug it in without battery holding vol up+back. NOTHING.
i think i will not have a problem at warranty because i think that the mb is surged, they dont have how to see that i have flashed, an official rom after all.
now, shoul i take it to lg? or to the retail store?
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Flash lg 10b stock rom with the help of kdz in emergency mode...
Sent from my LG-P500 using XDA App
yeah it will help u out jst tke out ur battery for few sec thn switch ur phone in emergency mode n connect with kdz n flash any lg 10.b. 10d rom
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883314 follow this guidee nads make sure u have taken necessary precaution while flashing from kdz everything is mentioned in downgrading the phone in the link here http://forum.xda-developers.com/showthread.php?t=1038338
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
sikario.prk said:
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
Click to expand...
Click to collapse
Care to answer my question?
doktornotor said:
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Click to expand...
Click to collapse
Did and nothing, even left phone without battery all night. No emergency mode, or anything
sikario.prk said:
Did and nothing, even left phone without battery all night. No emergency mode, or anything
Click to expand...
Click to collapse
Well. RMA it then, nothing we could do here.
doktornotor said:
Well. RMA it then, nothing we could do here.
Click to expand...
Click to collapse
I'm kinda noob here, whats RMA? And, can I take it to warranty?
sikario.prk said:
whats RMA? And, can I take it to warranty?
Click to expand...
Click to collapse
RMA and claim warranty is the same thing.
doktornotor said:
RMA and claim warranty is the same thing.
Click to expand...
Click to collapse
Oh, lol, thanks.
Talked with a support agent from LG, they gave me an Authorization number that a have to write on the shipping box with the phone... Lets see what happens
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
crashff said:
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
Click to expand...
Click to collapse
KDZ updater?
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
crashff said:
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
Click to expand...
Click to collapse
Ok, pop me a msg, my last option to revive it, is sending it to LG
Did a conversion to original 2.2.2 V10q with KDZ and when turning on the phone, it didn;t turn on (as expected). Not responding at all. Power, button combination or some @#@# like that - not working. So, sent it to LG Service through VDF Romania 4 days ago and now i have a new PCB with new IMEI and a fully working P500. So, that was my solution for meddling with updaters, ROM's, etc. and forgetting to disable LGE Modem in Device Manager (it was late at night)
i havent tested it yet on Cm7/miui roms, so beware.
It is just a stock T959TLKG2 gb bootloader.
Flash it via odin
Solid brick. Thank you.
DE_NISKA said:
Solid brick. Thank you.
Click to expand...
Click to collapse
wait you bricked your phone with this?
Yes. Total brick. Looking for jtag.
DE_NISKA said:
Yes. Total brick. Looking for jtag.
Click to expand...
Click to collapse
Do you have a telus t959d? I flashed this with no problems, you must have had a bad flash. This is the boot loader from the official telus 2.3.3 release so there is no way it should have bricked your phone. Just make a jig. The first brick i did months ago sucked so i ran out and bought the resistors and soldered them up to a spare micro sd end and was up and running in minutes, very simple to do if you know how to solder.
Sorry for the noob question, but I got to ask...
I'm already updated to telus GB 2.3.3, what/who is this bootloader for?
thx
Here is a solid one. Unzip it and Flash what is in the zip as it is no renames no nothing.
File to flash will be T959TLKG2.tar.md5.
Regards
madizmo said:
Do you have a telus t959d? I flashed this with no problems, you must have had a bad flash. This is the boot loader from the official telus 2.3.3 release so there is no way it should have bricked your phone. Just make a jig. The first brick i did months ago sucked so i ran out and bought the resistors and soldered them up to a spare micro sd end and was up and running in minutes, very simple to do if you know how to solder.
Click to expand...
Click to collapse
what rom are you using??
also what advantages does using the Gingerbread bootloader bring??
MrManiacNF said:
Sorry for the noob question, but I got to ask...
I'm already updated to telus GB 2.3.3, what/who is this bootloader for?
thx
Click to expand...
Click to collapse
I would like to know this as well. I assume we already have it if we are on 2.3.3 already.
MrManiacNF said:
Sorry for the noob question, but I got to ask...
I'm already updated to telus GB 2.3.3, what/who is this bootloader for?
thx
Click to expand...
Click to collapse
this boot loader would be for people who do not use the official telus roms(IE CM7 or MIUI) as these roms do not touch the bootloader so a separate update needs to be done once to get to the latest...as for actual benefits for anyone using a GB bootloader the only half definitive answer i got was that it helps lower battery use.
damn flashed today...so far it's a brick....WTF!!!!
100% brick...damn it
Grondinm said:
damn flashed today...so far it's a brick....WTF!!!!
100% brick...damn it
Click to expand...
Click to collapse
Please explain...
Did you use the package i posted?
Did you place it on pda window?
Odin said pass!
demetris_I said:
Please explain...
Did you use the package i posted?
Did you place it on pda window?
Odin said pass!
Click to expand...
Click to collapse
Yes
Yes
phone rebooted and never came back up...odin stayed at the state before pass!
maybe i should have waited longer before calling it a fail and unplugging but i waited 1-2 min
i have a jog on the way i hope to got it will fix it...phone does not even power up at all not signs of life...
Sorry to post this late but NEVER tick reboot when flashing bootloaders.
ok now, remove battery, leave it 1-2 days with out one, then do this:
Open odin Press Vol+ and Vol- connect usb cable and put battery on.
If you have download mode reflash bootloader this time make sure reboot is not ticked, nothing ticked except pda.
If said fail retry without power off phone, if pass press power for 10 secs and you are good to go.
thank you i tried that i already had the battery out of the phone since it happened opened up odin pressed both vol + and vol - plugged in the usb cable and put the battery in(was tricky) waited a few secs but nothing....i really hope the jig i ordered is going to work...what do you think the chances are of it working?? i think i will try your trick again come monday just because
Grondinm said:
thank you i tried that i already had the battery out of the phone since it happened opened up odin pressed both vol + and vol - plugged in the usb cable and put the battery in(was tricky) waited a few secs but nothing....i really hope the jig i ordered is going to work...what do you think the chances are of it working?? i think i will try your trick again come monday just because
Click to expand...
Click to collapse
5% working 95% not working.
Keep trying because there is an eeprom in motherboard that can kickstart the download mode after a few days of none power.
demetris_I said:
5% working 95% not working.
Keep trying because there is an eeprom in motherboard that can kickstart the download mode after a few days of none power.
Click to expand...
Click to collapse
does not look good then....damn.....
also why vol + and - normally it's only vol - and plug in usb cable...
My bad, am from the vibrant forum
demetris_I said:
My bad, am from the vibrant forum
Click to expand...
Click to collapse
makes sense.,....i will try again monday...i hope iu can bring my phone back somehow...it's not even the phone i care about it's really the data pictures/videos...if i can't vbring it back anyway to hook up the internal sd to something to get the data back??
internal is onboard the motherboard so nope.
No worries though, if it cant be fixed i have a suggestion to make, i hope you are good on soldering.
Hi guys,
HERE'S WHATS HAPPENING
I cant turn on my phone. Not even thee phone screen lights up, and the buttons too wont light up.
i tried to charge my phone but it doesnt seem to charge
i tried charging the battery out from a separate battery charger -> helpless :'(
HERE'S WHAT IVE DONE
I flashed cm9 by HepHappy (11 may)
i used it for 2 days and was awesome !
and then i dont know what i did, i got a bootloop and was stuck with it
then i tried to enter recovery and it doesnt enter recovery. it goes straight to the bootloop
then i was able to go to emergency mode and flashed official 2.3.3 firmware with KDZ
then i got an error from KDZ upgrade error and something like that...
now i tried to boot to recovery but it said
fastboot detected
fastboot () something like that i dont remember
and still the emergency mode was working..
HOW COULD I BE DUMB
then i took the battery out and kept it aside for a while
I HAVE SEVERE PROBLEMS. THE USB PORT ON MY OPTIMUS ONE IS KINDA BROKEN SO I SHOULD HOLD MY USB CABLE TIGHT TO GET IT WORKING. NEXT I DONT KNOW IF ITS UNCHARGED BUT OFFLINE CHARGING DOESNT WORK IN CM9
NOW MY PHONE DOESNT EVEN TURN ON OR GOES TO EMERGENCY MODE OR ANYTHING
IT JUST STAYS DUMBB!!!!!!
HELP ME GUYS !
are you sure that emergency mode isn't working ? .... I had the same problem but i revived my phone with the fastboot method (it is explained somewhere in the forum ) .
retry going to emergency mode (should be a yellow screen),that's the only solution i now
HardGeek... said:
are you sure that emergency mode isn't working ? .... I had the same problem but i revived my phone with the fastboot method (it is explained somewhere in the forum ) .
retry going to emergency mode (should be a yellow screen),that's the only solution i now
Click to expand...
Click to collapse
i cant, its hust sitting dumb without any respond. even the lg logo doesnt apear
Sounds like a hard brick to me, if it wont come on at all and you tried all possible ways then your phone is done, I would sell the phone on ebay for parts and use the money towards a new phone.
ajay.d96 said:
Hi guys,
HERE'S WHATS HAPPENING
I cant turn on my phone. Not even thee phone screen lights up, and the buttons too wont light up.
i tried to charge my phone but it doesnt seem to charge
i tried charging the battery out from a separate battery charger -> helpless :'(
HERE'S WHAT IVE DONE
I flashed cm9 by HepHappy (11 may)
i used it for 2 days and was awesome !
and then i dont know what i did, i got a bootloop and was stuck with it
then i tried to enter recovery and it doesnt enter recovery. it goes straight to the bootloop
then i was able to go to emergency mode and flashed official 2.3.3 firmware with KDZ
then i got an error from KDZ upgrade error and something like that...
now i tried to boot to recovery but it said
fastboot detected
fastboot () something like that i dont remember
and still the emergency mode was working..
HOW COULD I BE DUMB
then i took the battery out and kept it aside for a while
I HAVE SEVERE PROBLEMS. THE USB PORT ON MY OPTIMUS ONE IS KINDA BROKEN SO I SHOULD HOLD MY USB CABLE TIGHT TO GET IT WORKING. NEXT I DONT KNOW IF ITS UNCHARGED BUT OFFLINE CHARGING DOESNT WORK IN CM9
NOW MY PHONE DOESNT EVEN TURN ON OR GOES TO EMERGENCY MODE OR ANYTHING
IT JUST STAYS DUMBB!!!!!!
HELP ME GUYS !
Click to expand...
Click to collapse
You are not in '****'..if you still can enter on the start up to fastboot mode, then u can flaash it through KDZ..dont worry u can rescue your phone..
Sometimes it happened to me when battery was low or batt stats use wrong parameters, then I wasnt able to enter to the recovery and did stack with bootloop..
mastershefis said:
You are not in '****'..if you still can enter on the start up to fastboot mode, then u can flaash it through KDZ..dont worry u can rescue your phone..
Sometimes it happened to me when battery was low or batt stats use wrong parameters, then I wasnt able to enter to the recovery and did stack with bootloop..
Click to expand...
Click to collapse
at first it entered to fastboot mode. But then i switched off my phone. now it doesn even turn on
it doesnt even enter emergency mode
ajay.d96 said:
at first it entered to fastboot mode. But then i switched off my phone. now it doesn even turn on
it doesnt even enter emergency mode
Click to expand...
Click to collapse
Happens same to me.
Its hard bricked
You have two options
-buy jtag
-give phone to LG and tell them it happenes while updating to 2.3
Sent from my LG-P500 using xda premium
Charge the battery alternately
Try charging your O1's battery using other means. Like borrowing another O1 and charging your O1's battery using that. Then see whether your phone is responding in any way. If it is, I'm sure KDZ will help. Also see whether the USB port can be fixed. Otherwise, you'll be taking great risks again. All the best.
aravindsagar said:
Try charging your O1's battery using other means. Like borrowing another O1 and charging your O1's battery using that. Then see whether your phone is responding in any way. If it is, I'm sure KDZ will help. Also see whether the USB port can be fixed. Otherwise, you'll be taking great risks again. All the best.
Click to expand...
Click to collapse
i used my friend's charger and it seems to get heating (i think it is charging)
but the screen remains black and doesnt power on
Are you (at least) still under warranty ?
if YES, go to LG and try to convince them that was an accident (during an update)...
or just try another battery of your friends, the KDZ method worked for me too .
HardGeek... said:
Are you (at least) still under warranty ?
if YES, go to LG and try to convince them that was an accident (during an update)...
or just try another battery of your friends, the KDZ method worked for me too .
Click to expand...
Click to collapse
no warranty dude
im working hard on it and trying to find a new way to get it unbricked
ill be sure to post a tut on this same section after i find a way and i have hope D
OK, good luck then....
Hope you'll get it unbricked soon
It happended to me one time, that I got the kdz error, and my p500 wasn´t recognized by my pc, I let it plug with the usb to my pc all night and when I woke up it was on emergency mode, and I could flash it again after a couple of times trying.
Hope you got luck with it like me.
eddant said:
It happended to me one time, that I got the kdz error, and my p500 wasn´t recognized by my pc, I let it plug with the usb to my pc all night and when I woke up it was on emergency mode, and I could flash it again after a couple of times trying.
Hope you got luck with it like me.
Click to expand...
Click to collapse
mine doesn't even turn on. yours too ?
fixed a phone that doesn't even turn on
Any solution yet???
I was trying to revert to stock rom through kdz.....but my pc restarted due to power failure.....
I tried kdz updater again but it gave some error wparam=**** param=****.......
I tried both diag and emergency mode........
Then i too removed the battery at emergency mode!!
Now my phone is dead!!
Have you found solution for it yet???
gargujjwal said:
I was trying to revert to stock rom through kdz.....but my pc restarted due to power failure.....
I tried kdz updater again but it gave some error wparam=**** param=****.......
I tried both diag and emergency mode........
Then i too removed the battery at emergency mode!!
Now my phone is dead!!
Have you found solution for it yet???
Click to expand...
Click to collapse
Lie to LG that it happens while updating to 2.3
Or use j-tag
Sent from my LG-P500 using xda premium
aspee said:
Lie to LG that it happens while updating to 2.3
Or use j-tag
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I agree
Sent from my LG-VM696 using XDA
Whats j-tag ?
Sent from my LG-P500 using xda premium
Android311 said:
I agree
Sent from my LG-VM696 using XDA
Click to expand...
Click to collapse
I believe those are the only solutions now. But warranty mustn't be expired if you're gonna tell LG a story
Sent from my LG-P500 using xda premium
Hello there,
I am having a problem with my Xperia X10a.
Was using ferraKernal v25 with ferrarom. Everything was working fine until yesterday.
PROBLEM: When i try to power my phone on, it vibrates for a short time with a single blink of green but the phone wont turn on.
SOLUTION TRIED:
1. Battery ok.
2. Flashtool 0.2.9 gb ready (flashing aborted)
3. Flashtool 0.9.18 (gets stuck at Processing of loader_unlocked.sin finished.)
4. pc companion (This device has no updates)
Below is the screenshot from flashtool.
Is there anyway to solve this problem. ?
Thank you.
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
born_high said:
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
Click to expand...
Click to collapse
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
ph0n3n3rd said:
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
Click to expand...
Click to collapse
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
born_high said:
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
Click to expand...
Click to collapse
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3
ph0n3n3rd said:
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3
Click to expand...
Click to collapse
Well..as i opened the thread with some statements above mate..
I was already using a Feravolt rom and kernel..And i rooted it and then flashed.
And obviously i know what/how to get into recovery.
But the thing is its not working without any good reason...
Situation like this happened to me before..
i was able to sues it then with stock..
But nothing seems to work now.
I guess i am not worth the seniors attention in here.
I shouldnt have opened the thread at the first place
but Hey, thanks for at least trying to help
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
Hahaha are you for serious XD. !!!
I recall someone(senior member) from xda once posted somewhere that, one thing putting the phone into freezer can do is just damage your phone
still i will give it a shot..its dead anyway..
will let you know
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
okay i did what you said without a solve to the problem..thought to let you know
Cheers to another dead Xperia x10.
As the developers are ignorant of the problem.
use this!
it will work.
http://forum.xda-developers.com/showthread.php?t=1504809
i have registered just for you
omi17 said:
See here>>>http://pune.quikr.com/Hard-Brick-Phone-Repair-Through-Riff-Z3X-Box-Aka-Jtag-Services-In-India-W0QQAdIdZ200482728
Click to expand...
Click to collapse
are you freaking trolling me
get lost with ads :/