My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Flash lg 10b stock rom with the help of kdz in emergency mode...
Sent from my LG-P500 using XDA App
yeah it will help u out jst tke out ur battery for few sec thn switch ur phone in emergency mode n connect with kdz n flash any lg 10.b. 10d rom
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883314 follow this guidee nads make sure u have taken necessary precaution while flashing from kdz everything is mentioned in downgrading the phone in the link here http://forum.xda-developers.com/showthread.php?t=1038338
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
sikario.prk said:
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
Click to expand...
Click to collapse
Care to answer my question?
doktornotor said:
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Click to expand...
Click to collapse
Did and nothing, even left phone without battery all night. No emergency mode, or anything
sikario.prk said:
Did and nothing, even left phone without battery all night. No emergency mode, or anything
Click to expand...
Click to collapse
Well. RMA it then, nothing we could do here.
doktornotor said:
Well. RMA it then, nothing we could do here.
Click to expand...
Click to collapse
I'm kinda noob here, whats RMA? And, can I take it to warranty?
sikario.prk said:
whats RMA? And, can I take it to warranty?
Click to expand...
Click to collapse
RMA and claim warranty is the same thing.
doktornotor said:
RMA and claim warranty is the same thing.
Click to expand...
Click to collapse
Oh, lol, thanks.
Talked with a support agent from LG, they gave me an Authorization number that a have to write on the shipping box with the phone... Lets see what happens
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
crashff said:
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
Click to expand...
Click to collapse
KDZ updater?
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
crashff said:
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
Click to expand...
Click to collapse
Ok, pop me a msg, my last option to revive it, is sending it to LG
Did a conversion to original 2.2.2 V10q with KDZ and when turning on the phone, it didn;t turn on (as expected). Not responding at all. Power, button combination or some @#@# like that - not working. So, sent it to LG Service through VDF Romania 4 days ago and now i have a new PCB with new IMEI and a fully working P500. So, that was my solution for meddling with updaters, ROM's, etc. and forgetting to disable LGE Modem in Device Manager (it was late at night)
Related
ok. i;ve done it.
i tried to install v10c europe unbranded and kdz updater gave me a param error and now my phone is completly dead. it doesnt start at all.
can i recover it somehow?
kdz updater doesn't see it any longer.
Does it show anything at all. Does the screen display the LG or android logo?
Try the hard reset. Press Vol down+Home+PowerButton till you see the LG logo come up. If things are fine then the phone should reset itself to original state.
Best of Luck.
BTW, did you again flash in CDMA and DIAG mode?
it doesnt start at all.
i dont know how to enter emergency mode.
it doesnt hard reset or anything. it looks dead.
i flash in 3g and diag.
Pretty strange that nothing comes up.
Just to experiment, when you plug in the charger (AC) does the phone begin to charge (do you seen the battery indicator come up).
And hopefully someone more experience will turn up and help you. I really don't have much idea...
I think you will find this useful http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
Remove battery and leave it few hours without it. After that run KDZ_UPD, configure (i think 3gs, diag, select FW - look on some how-to) without battery plug USB and press vol down+home and power on and still hold untill recovery appear. Then still try connect via KDZ.
I hope, that it will wokrs.
i will try to keep the battery out for a few hours.
i've tried to connect without battery and keep the buttons to start but with no luck.
the phone looks dead!
how can i enter emergency mode?
Is it start? Or if you press power button, is something happened or dipslay of phone is just black? If so, then probably nothing will help and you will have to send it to warranty service.
absolutly nothing happens. no power at all. not even when i plug in the charger.
will lg fix it for me? it was bought on 15 december this year, it has 3 days.
can they see that i have tried to flash another rom?
well that is why I don't play around with the kdz updater.
everyone ends up with their phone bricked at some point.
Try to get in emergency mode back+up volume+power.
Tell me if it works.
it doesnt get in emergency mode.
I had same problem with mine P500.I was tried to update to v10d something went wrong I got some errors and after few more tries my phone was completely dead.I was lucky and my phone was changed by operator.
I did some research before carrying it back to operator and it seems that the only way to resurrect phone is JTAG.But how to do it i have no idea if it can be done at all.
You can find some info here wiki.cyanogenmod.com/index.php?title=JTAG_for_Dream/Magic[/url
If emergency mode doesn't work....(wait for someone with more exp to post :/ )
Kdz updater working fine. I try 3 different fw and have no problem.
Sent from my LG-P500 using Tapatalk
Same as me. I flashed 2-tikes without any problema.
Sent from my LG-P500 using XDA App
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Hi i have got the same problem, you have solved? next week I go for assistance, we hope .. even if I pay ..
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Since you were flashing with original LG firmware, they shouldn't raise much issue. Just don't tell them that you used the KDZ updater....
BTW did you try the CS_Emergency under Phone Mode in the KDZ updater.
also dont give them the guilty look
the phone is completly dead, not detected by computer, even when i plug it in without battery holding vol up+back. NOTHING.
i think i will not have a problem at warranty because i think that the mb is surged, they dont have how to see that i have flashed, an official rom after all.
now, shoul i take it to lg? or to the retail store?
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Never ever plug out battery in emergency mode.... it hard bricks the phone....
I assume that u r not a mobile hardware engineer so there is no home made solution for it...
if ur device is still under warranty.. take it service center n say that the phone died while updating lg firmware... they will replace the pcb then
Sent from my LG-P500 using Tapatalk 2 Beta-3
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Have you tried reflashing with kdz, but using another firmware? Maybe you used a wrong one.
EDIT : i missed the part where you said it died. My bad.
fundoozzz said:
Never ever plug out battery in emergency mode.... it hard bricks the phone....
I assume that u r not a mobile hardware engineer so there is no home made solution for it...
if ur device is still under warranty.. take it service center n say that the phone died while updating lg firmware... they will replace the pcb then
Sent from my LG-P500 using Tapatalk 2 Beta-3
Click to expand...
Click to collapse
Are you sure that this operation doesn't break the warranty????
And I can't replace pcb by my self???
And how many days they want to do replacing operation??
Thank you
just don't tell them that your phone was rooted.
say that you were updating firmware via LG Support Tool and then the installation stucked.
hemo-ali said:
Are you sure that this operation doesn't break the warranty????
And I can't replace pcb by my self???
And how many days they want to do replacing operation??
Thank you
Click to expand...
Click to collapse
this does void warrant but who knows that u rooted it when it will not even boot up.... do the thing the other guy said just above this post...
n I guess u don't like to mess up with your phone by trying to replace things by yourself... good luck..
and no. of days they will take depends on the availability of pcb with the service center..
Sent from my LG-P500 using Tapatalk 2 Beta-3
Solution is only one..let bring it to LG SC if phone is unresponsive is easy for them to change pcb without controling if you make root or not..they don't cares about it..
But be sure that your phone is out of control it means that you can't be able to turn on..and is still off!..
I know it because one time I had flashed recovery through mobile data and was wrong way..phone died and after 4 days I had have my mobile back from SC..
Okay First thing is to give the phone to lg support center and don't tell them that was rooted before that I should ensure that the phone is dead
okay I will do that today thnx all and wait for my feedback
are you tried hard reset after using kdz because my friend faced same problem after using kdz but after hard reset my friend phone work like new
you can do hard reset using
try this
Remove battery, replace battery Press Volume Down + Call + Power button. Release Power button when you see LG logo but hold the other two unless you see new screen
go the optimus me group you will find what you want for optimus me and you will get fast support then xda
https://www.facebook.com/groups/185645224876840/
Not working
hemo-ali said:
Not working
Click to expand...
Click to collapse
then you have only that already posted take your phone to lg sc
I think that the only Services Center can help you,... unfortunately.
Wait is PCB a part of the internal phone electronic panel??? or it's files in someplace in the phone????
hemo-ali said:
Wait is PCB a part of the internal phone electronic panel??? or it's files in someplace in the phone????
Click to expand...
Click to collapse
You better take your phone to the service centre.
Okay I understand that i don't understand anything
Oomahey said:
You better take your phone to the service centre.
Click to expand...
Click to collapse
But why I shouldn't know&understand ??
hemo-ali said:
But why I shouldn't know&understand ??
Click to expand...
Click to collapse
Google PCB. Its sort of a motherboard for your phone...
So it's a hardware
every phone has his own one??
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Using octopus box or RIFF box to repair boot. It's OK! I'll try and everything work.
I use them or lg support center use them??
And if I can use them how??
Please help me my phone got bricked and it doesnt power on what can i do please help me.
Can you tell exactly what you did?
It may help us help you
Sent from my LG-P990 using XDA
I tried to downgrade my phone back from cm7 latest nighty so i used KDZ tool and at the end of update process it showed failed and my phone went to emergency mode.
Next i tried LGDMP tool and tried to flash kdz.
after several failed tries my phone got switched off once for all.
joseph05sasi said:
I tried to downgrade my phone back from cm7 latest nighty so i used KDZ tool and at the end of update process it showed failed and my phone went to emergency mode.
Next i tried LGDMP tool and tried to flash kdz.
after several failed tries my phone got switched off once for all.
Click to expand...
Click to collapse
Turned itself or you did hlep him to turn off?
What error did you see?
Can you turn it on after pulled off battery?
Did you charged battery befory?
mastershefis said:
Turned itself or you did hlep him to turn off?
What error did you see?
Can you turn it on after pulled off battery?
Did you charged battery befory?
Click to expand...
Click to collapse
I switched it off when in emergency mode and i never powered on again i removed and reinserted battery no use i tried with my friends battery he also has the same mobile. Its not powering on
joseph05sasi said:
I switched it off when in emergency mode and i never powered on again i removed and reinserted battery no use i tried with my friends battery he also has the same mobile. Its not powering on
Click to expand...
Click to collapse
Try the steps from here : [HOWTO] Phone not responding at all - last chance to repair
joseph05sasi said:
Please help me my phone got bricked and it doesnt power on what can i do please help me.
Click to expand...
Click to collapse
Using octopus box or RIFF box to repair boot. It's OK! I'll try and everything work.
lnthanh said:
Using octopus box or RIFF box to repair boot.
Click to expand...
Click to collapse
what is that??? is it a tool??? or some kind of device???
starrscreem said:
what is that??? is it a tool??? or some kind of device???
Click to expand...
Click to collapse
sent my mobile to service center as its underwarranty got my mother board replaced as they say my mother board is dead. created a story telling that it happened when i was updating to gingerbread
joseph05sasi said:
sent my mobile to service center as its underwarranty got my mother board replaced as they say my mother board is dead. created a story telling that it happened when i was updating to gingerbread
Click to expand...
Click to collapse
LOL this was exactly I did when my phone was bricked. Lucky me, my phone's motherboard was replaced for free (because of the warranty). They said I must pay $200 if i was not in warranty
Hi guys,
HERE'S WHATS HAPPENING
I cant turn on my phone. Not even thee phone screen lights up, and the buttons too wont light up.
i tried to charge my phone but it doesnt seem to charge
i tried charging the battery out from a separate battery charger -> helpless :'(
HERE'S WHAT IVE DONE
I flashed cm9 by HepHappy (11 may)
i used it for 2 days and was awesome !
and then i dont know what i did, i got a bootloop and was stuck with it
then i tried to enter recovery and it doesnt enter recovery. it goes straight to the bootloop
then i was able to go to emergency mode and flashed official 2.3.3 firmware with KDZ
then i got an error from KDZ upgrade error and something like that...
now i tried to boot to recovery but it said
fastboot detected
fastboot () something like that i dont remember
and still the emergency mode was working..
HOW COULD I BE DUMB
then i took the battery out and kept it aside for a while
I HAVE SEVERE PROBLEMS. THE USB PORT ON MY OPTIMUS ONE IS KINDA BROKEN SO I SHOULD HOLD MY USB CABLE TIGHT TO GET IT WORKING. NEXT I DONT KNOW IF ITS UNCHARGED BUT OFFLINE CHARGING DOESNT WORK IN CM9
NOW MY PHONE DOESNT EVEN TURN ON OR GOES TO EMERGENCY MODE OR ANYTHING
IT JUST STAYS DUMBB!!!!!!
HELP ME GUYS !
are you sure that emergency mode isn't working ? .... I had the same problem but i revived my phone with the fastboot method (it is explained somewhere in the forum ) .
retry going to emergency mode (should be a yellow screen),that's the only solution i now
HardGeek... said:
are you sure that emergency mode isn't working ? .... I had the same problem but i revived my phone with the fastboot method (it is explained somewhere in the forum ) .
retry going to emergency mode (should be a yellow screen),that's the only solution i now
Click to expand...
Click to collapse
i cant, its hust sitting dumb without any respond. even the lg logo doesnt apear
Sounds like a hard brick to me, if it wont come on at all and you tried all possible ways then your phone is done, I would sell the phone on ebay for parts and use the money towards a new phone.
ajay.d96 said:
Hi guys,
HERE'S WHATS HAPPENING
I cant turn on my phone. Not even thee phone screen lights up, and the buttons too wont light up.
i tried to charge my phone but it doesnt seem to charge
i tried charging the battery out from a separate battery charger -> helpless :'(
HERE'S WHAT IVE DONE
I flashed cm9 by HepHappy (11 may)
i used it for 2 days and was awesome !
and then i dont know what i did, i got a bootloop and was stuck with it
then i tried to enter recovery and it doesnt enter recovery. it goes straight to the bootloop
then i was able to go to emergency mode and flashed official 2.3.3 firmware with KDZ
then i got an error from KDZ upgrade error and something like that...
now i tried to boot to recovery but it said
fastboot detected
fastboot () something like that i dont remember
and still the emergency mode was working..
HOW COULD I BE DUMB
then i took the battery out and kept it aside for a while
I HAVE SEVERE PROBLEMS. THE USB PORT ON MY OPTIMUS ONE IS KINDA BROKEN SO I SHOULD HOLD MY USB CABLE TIGHT TO GET IT WORKING. NEXT I DONT KNOW IF ITS UNCHARGED BUT OFFLINE CHARGING DOESNT WORK IN CM9
NOW MY PHONE DOESNT EVEN TURN ON OR GOES TO EMERGENCY MODE OR ANYTHING
IT JUST STAYS DUMBB!!!!!!
HELP ME GUYS !
Click to expand...
Click to collapse
You are not in '****'..if you still can enter on the start up to fastboot mode, then u can flaash it through KDZ..dont worry u can rescue your phone..
Sometimes it happened to me when battery was low or batt stats use wrong parameters, then I wasnt able to enter to the recovery and did stack with bootloop..
mastershefis said:
You are not in '****'..if you still can enter on the start up to fastboot mode, then u can flaash it through KDZ..dont worry u can rescue your phone..
Sometimes it happened to me when battery was low or batt stats use wrong parameters, then I wasnt able to enter to the recovery and did stack with bootloop..
Click to expand...
Click to collapse
at first it entered to fastboot mode. But then i switched off my phone. now it doesn even turn on
it doesnt even enter emergency mode
ajay.d96 said:
at first it entered to fastboot mode. But then i switched off my phone. now it doesn even turn on
it doesnt even enter emergency mode
Click to expand...
Click to collapse
Happens same to me.
Its hard bricked
You have two options
-buy jtag
-give phone to LG and tell them it happenes while updating to 2.3
Sent from my LG-P500 using xda premium
Charge the battery alternately
Try charging your O1's battery using other means. Like borrowing another O1 and charging your O1's battery using that. Then see whether your phone is responding in any way. If it is, I'm sure KDZ will help. Also see whether the USB port can be fixed. Otherwise, you'll be taking great risks again. All the best.
aravindsagar said:
Try charging your O1's battery using other means. Like borrowing another O1 and charging your O1's battery using that. Then see whether your phone is responding in any way. If it is, I'm sure KDZ will help. Also see whether the USB port can be fixed. Otherwise, you'll be taking great risks again. All the best.
Click to expand...
Click to collapse
i used my friend's charger and it seems to get heating (i think it is charging)
but the screen remains black and doesnt power on
Are you (at least) still under warranty ?
if YES, go to LG and try to convince them that was an accident (during an update)...
or just try another battery of your friends, the KDZ method worked for me too .
HardGeek... said:
Are you (at least) still under warranty ?
if YES, go to LG and try to convince them that was an accident (during an update)...
or just try another battery of your friends, the KDZ method worked for me too .
Click to expand...
Click to collapse
no warranty dude
im working hard on it and trying to find a new way to get it unbricked
ill be sure to post a tut on this same section after i find a way and i have hope D
OK, good luck then....
Hope you'll get it unbricked soon
It happended to me one time, that I got the kdz error, and my p500 wasn´t recognized by my pc, I let it plug with the usb to my pc all night and when I woke up it was on emergency mode, and I could flash it again after a couple of times trying.
Hope you got luck with it like me.
eddant said:
It happended to me one time, that I got the kdz error, and my p500 wasn´t recognized by my pc, I let it plug with the usb to my pc all night and when I woke up it was on emergency mode, and I could flash it again after a couple of times trying.
Hope you got luck with it like me.
Click to expand...
Click to collapse
mine doesn't even turn on. yours too ?
fixed a phone that doesn't even turn on
Any solution yet???
I was trying to revert to stock rom through kdz.....but my pc restarted due to power failure.....
I tried kdz updater again but it gave some error wparam=**** param=****.......
I tried both diag and emergency mode........
Then i too removed the battery at emergency mode!!
Now my phone is dead!!
Have you found solution for it yet???
gargujjwal said:
I was trying to revert to stock rom through kdz.....but my pc restarted due to power failure.....
I tried kdz updater again but it gave some error wparam=**** param=****.......
I tried both diag and emergency mode........
Then i too removed the battery at emergency mode!!
Now my phone is dead!!
Have you found solution for it yet???
Click to expand...
Click to collapse
Lie to LG that it happens while updating to 2.3
Or use j-tag
Sent from my LG-P500 using xda premium
aspee said:
Lie to LG that it happens while updating to 2.3
Or use j-tag
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I agree
Sent from my LG-VM696 using XDA
Whats j-tag ?
Sent from my LG-P500 using xda premium
Android311 said:
I agree
Sent from my LG-VM696 using XDA
Click to expand...
Click to collapse
I believe those are the only solutions now. But warranty mustn't be expired if you're gonna tell LG a story
Sent from my LG-P500 using xda premium
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
You don't need to discharge it..
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
panagiotisden2 said:
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
Click to expand...
Click to collapse
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
ByN3r0 said:
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
Click to expand...
Click to collapse
Are you sure that your battery is FULLY uncharged?
panagiotisden2 said:
Are you sure that your battery is FULLY uncharged?
Click to expand...
Click to collapse
my download mode isn't working in any way, i think i should sent it for repair
Thanks !
Thank you !
shalev1418 said:
Thank you !
Click to expand...
Click to collapse
you're wellcome
Did you unbriced your phone easy?
panagiotisden2 said:
you're wellcome
Did you unbriced your phone easy?
Click to expand...
Click to collapse
YUP!
shalev1418 said:
YUP!
Click to expand...
Click to collapse
Ok thank you. Im glad my method works
bartvp said:
my download mode isn't working in any way, i think i should sent it for repair
Click to expand...
Click to collapse
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
deviato said:
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
Click to expand...
Click to collapse
Ιm glad i helped enjoy your phone
bartvp said:
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
Click to expand...
Click to collapse
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
panagiotisden2 said:
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
Click to expand...
Click to collapse
I don't know. I read somewhere that it costs around $30-50. But maybe my warranty isn't void, because they can't check (maybe) my phone is rooted, so it costs nothing.
The only thing I can do is waiting and waiting...
---------- Post added at 07:04 AM ---------- Previous post was at 06:53 AM ----------
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
I will never do this . You only brick it harder i think
HI!
I have D620r. I tryed fw update with LG MobileSupportTool. It stuck at 2, or 3%, never goes up!!
Now, when I try power up, it show only: fastboot operation. I don't have download mode.
I left battery 0%, but this metod don't work too...
It is possible flash stock fw in fastboot mode, or it is bricked?
REQUEST: Can someone who have a bricked device record a video unbricking it with me method, so more users can easily unbrick their devices too just by watching the video tutorial?
Thanks
I tried
I tried to follow your steps but i can go download mode the smartphone start to charge :crying:
help pls
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
chacks1 said:
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
Click to expand...
Click to collapse
It's not possible. If you try, ROM's filesystem will replace the files you are using, making the device unusable (soft-bricked).