hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Never ever plug out battery in emergency mode.... it hard bricks the phone....
I assume that u r not a mobile hardware engineer so there is no home made solution for it...
if ur device is still under warranty.. take it service center n say that the phone died while updating lg firmware... they will replace the pcb then
Sent from my LG-P500 using Tapatalk 2 Beta-3
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Have you tried reflashing with kdz, but using another firmware? Maybe you used a wrong one.
EDIT : i missed the part where you said it died. My bad.
fundoozzz said:
Never ever plug out battery in emergency mode.... it hard bricks the phone....
I assume that u r not a mobile hardware engineer so there is no home made solution for it...
if ur device is still under warranty.. take it service center n say that the phone died while updating lg firmware... they will replace the pcb then
Sent from my LG-P500 using Tapatalk 2 Beta-3
Click to expand...
Click to collapse
Are you sure that this operation doesn't break the warranty????
And I can't replace pcb by my self???
And how many days they want to do replacing operation??
Thank you
just don't tell them that your phone was rooted.
say that you were updating firmware via LG Support Tool and then the installation stucked.
hemo-ali said:
Are you sure that this operation doesn't break the warranty????
And I can't replace pcb by my self???
And how many days they want to do replacing operation??
Thank you
Click to expand...
Click to collapse
this does void warrant but who knows that u rooted it when it will not even boot up.... do the thing the other guy said just above this post...
n I guess u don't like to mess up with your phone by trying to replace things by yourself... good luck..
and no. of days they will take depends on the availability of pcb with the service center..
Sent from my LG-P500 using Tapatalk 2 Beta-3
Solution is only one..let bring it to LG SC if phone is unresponsive is easy for them to change pcb without controling if you make root or not..they don't cares about it..
But be sure that your phone is out of control it means that you can't be able to turn on..and is still off!..
I know it because one time I had flashed recovery through mobile data and was wrong way..phone died and after 4 days I had have my mobile back from SC..
Okay First thing is to give the phone to lg support center and don't tell them that was rooted before that I should ensure that the phone is dead
okay I will do that today thnx all and wait for my feedback
are you tried hard reset after using kdz because my friend faced same problem after using kdz but after hard reset my friend phone work like new
you can do hard reset using
try this
Remove battery, replace battery Press Volume Down + Call + Power button. Release Power button when you see LG logo but hold the other two unless you see new screen
go the optimus me group you will find what you want for optimus me and you will get fast support then xda
https://www.facebook.com/groups/185645224876840/
Not working
hemo-ali said:
Not working
Click to expand...
Click to collapse
then you have only that already posted take your phone to lg sc
I think that the only Services Center can help you,... unfortunately.
Wait is PCB a part of the internal phone electronic panel??? or it's files in someplace in the phone????
hemo-ali said:
Wait is PCB a part of the internal phone electronic panel??? or it's files in someplace in the phone????
Click to expand...
Click to collapse
You better take your phone to the service centre.
Okay I understand that i don't understand anything
Oomahey said:
You better take your phone to the service centre.
Click to expand...
Click to collapse
But why I shouldn't know&understand ??
hemo-ali said:
But why I shouldn't know&understand ??
Click to expand...
Click to collapse
Google PCB. Its sort of a motherboard for your phone...
So it's a hardware
every phone has his own one??
hemo-ali said:
hello guys
I tried to flash i new firmware v10e but it failed and the program kdz updater ends the process then i unplugged it from the computer the emergency mode screen is what on the screen I released the battery then put it again Then I want to start up the phone holding power button doesn't wake up my died phone Can I do any thing for solve this problem or should I go to lg center (Is root break the warranty???)
Please Help me to find any home-made solution without going to lg supporting center
Quickly please i want my phone
Click to expand...
Click to collapse
Using octopus box or RIFF box to repair boot. It's OK! I'll try and everything work.
I use them or lg support center use them??
And if I can use them how??
Related
ok. i;ve done it.
i tried to install v10c europe unbranded and kdz updater gave me a param error and now my phone is completly dead. it doesnt start at all.
can i recover it somehow?
kdz updater doesn't see it any longer.
Does it show anything at all. Does the screen display the LG or android logo?
Try the hard reset. Press Vol down+Home+PowerButton till you see the LG logo come up. If things are fine then the phone should reset itself to original state.
Best of Luck.
BTW, did you again flash in CDMA and DIAG mode?
it doesnt start at all.
i dont know how to enter emergency mode.
it doesnt hard reset or anything. it looks dead.
i flash in 3g and diag.
Pretty strange that nothing comes up.
Just to experiment, when you plug in the charger (AC) does the phone begin to charge (do you seen the battery indicator come up).
And hopefully someone more experience will turn up and help you. I really don't have much idea...
I think you will find this useful http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
Remove battery and leave it few hours without it. After that run KDZ_UPD, configure (i think 3gs, diag, select FW - look on some how-to) without battery plug USB and press vol down+home and power on and still hold untill recovery appear. Then still try connect via KDZ.
I hope, that it will wokrs.
i will try to keep the battery out for a few hours.
i've tried to connect without battery and keep the buttons to start but with no luck.
the phone looks dead!
how can i enter emergency mode?
Is it start? Or if you press power button, is something happened or dipslay of phone is just black? If so, then probably nothing will help and you will have to send it to warranty service.
absolutly nothing happens. no power at all. not even when i plug in the charger.
will lg fix it for me? it was bought on 15 december this year, it has 3 days.
can they see that i have tried to flash another rom?
well that is why I don't play around with the kdz updater.
everyone ends up with their phone bricked at some point.
Try to get in emergency mode back+up volume+power.
Tell me if it works.
it doesnt get in emergency mode.
I had same problem with mine P500.I was tried to update to v10d something went wrong I got some errors and after few more tries my phone was completely dead.I was lucky and my phone was changed by operator.
I did some research before carrying it back to operator and it seems that the only way to resurrect phone is JTAG.But how to do it i have no idea if it can be done at all.
You can find some info here wiki.cyanogenmod.com/index.php?title=JTAG_for_Dream/Magic[/url
If emergency mode doesn't work....(wait for someone with more exp to post :/ )
Kdz updater working fine. I try 3 different fw and have no problem.
Sent from my LG-P500 using Tapatalk
Same as me. I flashed 2-tikes without any problema.
Sent from my LG-P500 using XDA App
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Hi i have got the same problem, you have solved? next week I go for assistance, we hope .. even if I pay ..
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Since you were flashing with original LG firmware, they shouldn't raise much issue. Just don't tell them that you used the KDZ updater....
BTW did you try the CS_Emergency under Phone Mode in the KDZ updater.
also dont give them the guilty look
the phone is completly dead, not detected by computer, even when i plug it in without battery holding vol up+back. NOTHING.
i think i will not have a problem at warranty because i think that the mb is surged, they dont have how to see that i have flashed, an official rom after all.
now, shoul i take it to lg? or to the retail store?
Hi guys,
My O1 is dead. I'm gonna send it for repair but I have a question. I've rooted my device and even installed custom recovery; flashing several roms as well. When my phone went dead, it was on a stock 2.2 rom. Now for the question: Will they repair my phone for me? ^.-
Thanks
It depends, I heard ppl that had custom roms and they got their phone repaired
Just don't tell them anything and hope for good
If something inside is fried then you might not be so lucky.
Oohh... Btw I managed to flash my phone's firmware with kdz updater but when I used the official LG application to update my software, it totally screwed up. Irony, isn't it?
Lol. It's good you didn't turn it in then. They would have voided your warranty. You can only go and ask them to repair it for you when the flashing chip on the mobo is dead
Sent from my LG-P500 using XDA Premium App
But i can't turn it on now. Kdz updater can't even detect my phone
Joel Chan said:
Hi guys,
My O1 is dead. I'm gonna send it for repair but I have a question. I've rooted my device and even installed custom recovery; flashing several roms as well. When my phone went dead, it was on a stock 2.2 rom. Now for the question: Will they repair my phone for me? ^.-
Thanks
Click to expand...
Click to collapse
Mine was repaired, after failed on flashing a different stock ROM.
The previous working rom was the wrong official one but non-rooted
I got it back after a week with new PCB
morx said:
Mine was repaired, after failed on flashing a different stock ROM.
The previous working rom was the wrong official one but non-rooted
I got it back after a week with new PCB
Click to expand...
Click to collapse
Aww that's great haha were you questioned?
Joel Chan said:
Aww that's great haha were you questioned?
Click to expand...
Click to collapse
I reported that my phone rebooted itself asking for PIN password while i was in my living room watching TV having it on the table in front of me. I tried to enter password but it was stuck and i only could remove battery, after inserting the battery, phone was not responding at all!
They sent it to LG service case closed, phone repaired ^^
Honestly my phone was stuck in emergency mode lol I did take out the battery though
Joel Chan said:
Honestly my phone was stuck in emergency mode lol I did take out the battery though
Click to expand...
Click to collapse
If it shows some life signals, then you need to COMPLETELY BRICK it.
If it's completely dead, they
1) cannot find what have you done in it's software
2) they're gonna believe the story easier
3) they're gonna put a new PCB, so it's like having a new phone.
try and flash using kdz flasher use a stock 2.2 rom
press vol up + menu button and then connect the usb port to pc .
flash from kdz hope it works mine was dead too but i gt the phone back to life using the method and choose cs emergency while flashing
shhbz said:
try and flash using kdz flasher use a stock 2.2 rom
press vol up + menu button and then connect the usb port to pc .
flash from kdz hope it works mine was dead too but i gt the phone back to life using the method and choose cs emergency while flashing
Click to expand...
Click to collapse
Yep I tried that and wasted about two hours yesterday. It just didn't work
morx said:
If it shows some life signals, then you need to COMPLETELY BRICK it.
If it's completely dead, they
1) cannot find what have you done in it's software
2) they're gonna believe the story easier
3) they're gonna put a new PCB, so it's like having a new phone.
Click to expand...
Click to collapse
Hehehe I'm thinking of a story now
Hi guys
I sent my phone to the sevice center today. They changed my motherboard for me! The thing is; they didn't ask me any questions. I just told them that I couldn't turn on the phone haha!
Sent from my LG-P500 using XDA App
They will i have done it 2 times already they send me a new phone both times without question i rooted and installed custom roms
dislplin01 said:
They will i have done it 2 times already they send me a new phone both times without question i rooted and installed custom roms
Click to expand...
Click to collapse
I see... I have another question. When I attempted to update using the official LG Updater, my phone was such in recovery halfway through the process. It was still in emergency mode but according to the Updater, I was asked to remove the battery. My phone went dead right after that. Do you know why it went dead?
Sent from my LG-P500 using XDA App
Just for the record, I bricked my phone again. Sending it to the service center again zzz
Gr8 u can keep getting a new mobo every week
ccdreadcc said:
Gr8 u can keep getting a new mobo every week
Click to expand...
Click to collapse
LOL I don't mind haha. I'm just afraid that the ppl fixing my phone might have read this thread
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Flash lg 10b stock rom with the help of kdz in emergency mode...
Sent from my LG-P500 using XDA App
yeah it will help u out jst tke out ur battery for few sec thn switch ur phone in emergency mode n connect with kdz n flash any lg 10.b. 10d rom
sikario.prk said:
My phone is dead dead.... Failed flashing kdz, now it doesn't do anything... What do I do???? Non of those steps worked.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=883314 follow this guidee nads make sure u have taken necessary precaution while flashing from kdz everything is mentioned in downgrading the phone in the link here http://forum.xda-developers.com/showthread.php?t=1038338
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
sikario.prk said:
Was a flashing fail error. I left the phone without battery all night, and still nothing. PC doesn't detect it, or nothing.
Click to expand...
Click to collapse
Care to answer my question?
doktornotor said:
Hmmm, does removing the battery, reinserting it and pressing Back + Volume Up + Power at least produce the yellow Emergency mode screen?
Click to expand...
Click to collapse
Did and nothing, even left phone without battery all night. No emergency mode, or anything
sikario.prk said:
Did and nothing, even left phone without battery all night. No emergency mode, or anything
Click to expand...
Click to collapse
Well. RMA it then, nothing we could do here.
doktornotor said:
Well. RMA it then, nothing we could do here.
Click to expand...
Click to collapse
I'm kinda noob here, whats RMA? And, can I take it to warranty?
sikario.prk said:
whats RMA? And, can I take it to warranty?
Click to expand...
Click to collapse
RMA and claim warranty is the same thing.
doktornotor said:
RMA and claim warranty is the same thing.
Click to expand...
Click to collapse
Oh, lol, thanks.
Talked with a support agent from LG, they gave me an Authorization number that a have to write on the shipping box with the phone... Lets see what happens
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
crashff said:
If you have the TMo optimus T, use the V10L kdz file. The flashing utility has a force mode that WILL work even if the computer does not detect the phone. You just have to make sure that nothing else is plugged into the USB port, and that your phone will power up.
I've bricked my phone 3 times now fiddling with removing stuff from the LIB directory from the stock rom (stupid me) and have always been able to recover it.
Click to expand...
Click to collapse
KDZ updater?
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
crashff said:
I think it was. I'll have to dig out the file from my android stuff when I get home.
V10L_00.KDZ file and the english KDZ_FW_UP program.
the mode used was CS EMERGENCY.
Click to expand...
Click to collapse
Ok, pop me a msg, my last option to revive it, is sending it to LG
Did a conversion to original 2.2.2 V10q with KDZ and when turning on the phone, it didn;t turn on (as expected). Not responding at all. Power, button combination or some @#@# like that - not working. So, sent it to LG Service through VDF Romania 4 days ago and now i have a new PCB with new IMEI and a fully working P500. So, that was my solution for meddling with updaters, ROM's, etc. and forgetting to disable LGE Modem in Device Manager (it was late at night)
I tried to downgrade my phone form 2.2.2 to 2.2 to root it because gingerbrike didn't work so i used kdz updater and it gave me error while in emergency mode and tried again but the same so I disconnect it and removed the battery and put it back and now the phone doesn't start at all in any way i mean no lg logo no android logo no nothing just turned off device
Is it bricked? and what to do?
sorry it is old Q but i did a lot of reading with no use
yes you are right, you bricked your phone.
Never remove battery to switch off phone if flashing failed
I get It now
OK so what shull I do???????
Yahya_amd said:
OK so what shull I do???????
Click to expand...
Click to collapse
can your phone enter in emergency mod?if it cans, that means that your phone is semi-bricked, and you can revive it.
Sent from my lg o1 with miuigen suicidal edition + paolo v6 touch kernel by Paolo + v6 supercharger by zeppelinrox using xda premium
if your phone is in warranty goto service center they will replace motherboard or replace whole handset for you.
And they wont be able to find out any thing regarding custom rom or recovery if you have used also, as motherboard is burnt.
same happened with me, they replaced my handset
no
It is dead i can't turn it on at all
mak.3736 said:
if your phone is in warranty goto service center they will replace motherboard or replace whole handset for you.
And they wont be able to find out any thing regarding custom rom or recovery if you have used also, as motherboard is burnt.
same happened with me, they replaced my handset
Click to expand...
Click to collapse
I think I will do that tomorrow Thank you
I took it today to LG service center and It will be ready on sat or sun
thy will change the board
Please help me my phone got bricked and it doesnt power on what can i do please help me.
Can you tell exactly what you did?
It may help us help you
Sent from my LG-P990 using XDA
I tried to downgrade my phone back from cm7 latest nighty so i used KDZ tool and at the end of update process it showed failed and my phone went to emergency mode.
Next i tried LGDMP tool and tried to flash kdz.
after several failed tries my phone got switched off once for all.
joseph05sasi said:
I tried to downgrade my phone back from cm7 latest nighty so i used KDZ tool and at the end of update process it showed failed and my phone went to emergency mode.
Next i tried LGDMP tool and tried to flash kdz.
after several failed tries my phone got switched off once for all.
Click to expand...
Click to collapse
Turned itself or you did hlep him to turn off?
What error did you see?
Can you turn it on after pulled off battery?
Did you charged battery befory?
mastershefis said:
Turned itself or you did hlep him to turn off?
What error did you see?
Can you turn it on after pulled off battery?
Did you charged battery befory?
Click to expand...
Click to collapse
I switched it off when in emergency mode and i never powered on again i removed and reinserted battery no use i tried with my friends battery he also has the same mobile. Its not powering on
joseph05sasi said:
I switched it off when in emergency mode and i never powered on again i removed and reinserted battery no use i tried with my friends battery he also has the same mobile. Its not powering on
Click to expand...
Click to collapse
Try the steps from here : [HOWTO] Phone not responding at all - last chance to repair
joseph05sasi said:
Please help me my phone got bricked and it doesnt power on what can i do please help me.
Click to expand...
Click to collapse
Using octopus box or RIFF box to repair boot. It's OK! I'll try and everything work.
lnthanh said:
Using octopus box or RIFF box to repair boot.
Click to expand...
Click to collapse
what is that??? is it a tool??? or some kind of device???
starrscreem said:
what is that??? is it a tool??? or some kind of device???
Click to expand...
Click to collapse
sent my mobile to service center as its underwarranty got my mother board replaced as they say my mother board is dead. created a story telling that it happened when i was updating to gingerbread
joseph05sasi said:
sent my mobile to service center as its underwarranty got my mother board replaced as they say my mother board is dead. created a story telling that it happened when i was updating to gingerbread
Click to expand...
Click to collapse
LOL this was exactly I did when my phone was bricked. Lucky me, my phone's motherboard was replaced for free (because of the warranty). They said I must pay $200 if i was not in warranty