Hey guys,
I just installed wolfs v7b6 with Doom kernel and it was running great for a couple days. Then i decided to flash xLoud/Bravia and now my home button doesnt work and i have no lock screen! I'm didnt do a backup before flashing so i was wondering if i reflash the rom will It restore it to before without xloud and without losing my apps/data? Does anybody know a fix for this?
thanks
Hey Guys, With my stock GB and even with ICS update, all were going fine. But when I tried to flash a new ROM like JB, xNovathor, CM9, CM10, CM10.1 (actually I've tried them all!), after flashing completed, I restart my phone. but since then touch doesn't work at all. Start screen appears and even I can take the screenshots, but touchscreen doesn't response at all. If anyone know the solution, please GIve me a Feedback! Thanks in advance!
Hello friends.
I am new to this wonderful community and very happy to be a part of it.
I am facing a very strange problem. I am trying to update my WT9i Live with walkman from Gingerbread to Ice cream sandwich. Problem is .. whenever I flash an ICS rom my touch doesn't work !! Everything else works fine (physical keys / network / audio). Then if I install GB rom again it works flawlessly.
I have unlocked bootloader.
I am using Flashtool to flash stock roms.
* WT19i_4.0.2.A.0.58_(1254-1868).ftf = works
* WT19i_4.0.2.A.0.62_(1254-1889).ftf = works
* WT19i_4.1.B.0.431_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_CUSTOMIZED CE3 WORLD I 1254-1889.ftf = touch doesn't respond
I have no idea what could be the reason. Any GB roms works smoothly. Any ICS roms bricks the touch screen. I have tried custom kernel (mesa .. kappa) and many custom ICS rom .. same problem. But at any moment I flash GB rom .. everything works.
I did all the research I could (for last 4 days) and read many threads .. tried many things. Nothing helped.
Please help me! Please Please Please.
I have seen many threads with problem "touch does't work because of flashing wrong rom or kernel".
I don't think that's my case. Because whenever I flash a stock GB rom .. it works just fine. Problem happens with ICS roms .. custom or stock.
I am going to try some custom GB rom with custom kernel. I'll post if that works.
This thread is most likely my last hope of finding a solution .. please help!
Just out of curiosity downloaded the 587 ICS generic rom from flasstool website then flashes it .. same touch problem.
Now downloading latest Nightly CM10 coconut. I'll try it. CM 9.1 stable did not worked .. same touch problem.
Please Help ! I dont see a clue ! Why ICS roms would freeze my touch when everything else works? I am on the verge of throwing my phone out of window !!!
Latest CM10 Nightly build = same problem .. touch screen is not working.
Flashed Stock GB = everything is fine !
:crying::crying::crying::crying::crying:
Now I am downloading every regional roms of stock ICS .. its all I can think of.
I know its a very old phone and update / development for it completely stopped. Its forgotten. Still I love this little cute handset and I would love to get ICS on it (for app support .. many app do not work on GB .. like google chrome).
So please help !
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Pixelado said:
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Click to expand...
Click to collapse
Hello. Thank you for replying. Its a second hand phone .. my brother purchased it from a friend then gave it to me. So it may have a replaced display or digitizer. I just checked with my brother and he said his friend never repaired the phone.
So GB and ICS use different digitizer drivers? Is it possible to use GB touch drivers with ICS?
No idea. Your problem is truly rare haha.
I'm out of ideas here, most of the time flashing a stock ftf does the trick, but not here.
if I were you, i'd sell that phone to someone who woulndn't care about software updates hehe.
Hello Friends.
I am posting this in case someone else face the same problem and find this thread. In my opinion ..this is a very rare and strange problem.
This problem should never happen with an original handset.
If your touch only works with Gingerbread stock roms and even after complete wipe other stock roms freeze your touch .. then you can be sure that your touch was replaced with a cheap one. Go to a servicing center and replace it with a good touch or sell the phone to someone else who doesn't care about updates.
I went to a servicing center today and replaced my touch. Now it works smoothly with stock ICS rom. I am sure it will work with CM too. It costed me around 25$.
1 tip to recognize low quality touch. Low quality touch will not have transparent bottom-left and bottom-right button. You wont be able to see the key lights through it. Good quality touch will have transparent button. Another warning .. after market touch is most probably not scratch resistant like the original touch .. so you may want to use a good screen protector (plastic film) on it.
This is not only for WT19i. Whenever you buy a secondhand set .. make sure its touch wasn't replaced and best to check if its upgraded and working properly.
Thanks to "Pixelado" for hinting me about the replaced touch issue. Then it made sense to me .. there was no other logical reason for the stock rom not working.
I am very happy with my upgraded ICS But kinda sad about the money loss ! Anyway loss is loss. This is a good handset and I hope it will serve me good. Now looking for a way to root it.
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Pixelado said:
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Click to expand...
Click to collapse
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
I've never tried mesa, so no comment there. Quie frankly, rage 3.2 seemed to be all i ever needed when using a stock rom. I tried lupus, but stopped using it when they switched from CWM to TWRP.
Angelina7 said:
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
Click to expand...
Click to collapse
i have same problem too
can u solve this problem?
hey guys
is there a custom kernel with ocin/underclocking etc for cm12.1?
i tried the hybrid kernel with crdroid (for the lulz ) and it ends in bootloop (dunno if this something unusual xD)
so thx in advance ^^
none that i know of, im also in need of a custom kernel for crdroid,i was goingt to switch to hybrid rom for the kernel but i cant for the love of god seem to get it to boot...
HI to all,
maybe someone have an good idea.
I compiled custom kernel for pie. But this kernel wont boot.
Spent a lot of hours to get this work. No way.
Does someone know, why a custom kernel, ramdisk was tested with stock kernel, not work?
With my kernel i can boot with twrp. This works.
Galaxy S7 Endge is working with custom kernel.
What does the bootloader do inside S3?
Big thanks for help
I found the solution.
The tab is not booting because of wacom driver.
But i dont know why.