i can not help those who see no need for help. good luck with life. thread closed.
xxx
xxx
Excellent work dude, I linked your thread to my sig
thanks man! i know there's a LOT of people anxious to get their teeth into this, and i'm staying up as long as i can to get it as close to complete as i can before i crash, so that by the time i wake up, every one is running an unlocked bootloader or a rooted phone - and no one is softbricked.
btw, not sure who to ask, but it says you're a "senior member", so, do you know if i can change my screen name on this site to "villan" (purposely misspelled, to reflect my other project's name (villan.co))?
No PBJ for me. :crying: I spent a good 2 hours sending the adb reboot oem-unlock using cmd in Windows with admin. Now, I've spent an hour my Linux Mint laptop. I'm going to keep trying but I'm feeling very silly repeating the commands over and over. Are you sure about this?
sentientsystem said:
thanks man! i know there's a LOT of people anxious to get their teeth into this, and i'm staying up as long as i can to get it as close to complete as i can before i crash, so that by the time i wake up, every one is running an unlocked bootloader or a rooted phone - and no one is softbricked.
btw, not sure who to ask, but it says you're a "senior member", so, do you know if i can change my screen name on this site to "villan" (purposely misspelled, to reflect my other project's name (villan.co))?
Click to expand...
Click to collapse
We don't decide that stuff, admins do, I think
Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2
Okay....maybe I'm not patient but I've had enough. I'm about ready to toss both my laptop and phone out of my window. Back to stock 20h.
i'll be trying this today. No wonder it didn't work, i was 20f. Now i have to be mad at T-Mobile and LG. This coming from the same people who brought us the Nexus 4. How could they mess things up this badly?
---------- Post added at 11:04 AM ---------- Previous post was at 11:02 AM ----------
do i still have to flash to ICS before 20B?
unbrickable?!?
Thanks for dumbing this one down, but I think I managed to screw things up anyways.
I've gotten the dreaded "Security Error" and can't seem to get the phone to be recognized by the computer anymore. I can get the phone to the S/W ugrade screen, the drives load, but the adb, the lg software, fastboot, all don't recognize the phone. Did you ever run into something like this? If so, what methods did you use to unbrick?
Thanks!
** EDIT **
So I was able to finally get it to fastboot using Lelus fastboot package. Kept trying to load the files for JB (option 7), would get the flipped fastboot screen, phone would restart. Would enter S/W update mode but not communicate with KDZ. Instead I used option 5 to load ICS, got the flipped screen again, waited for the phone to restart, entered S/W update mode, and now KDZ connected to the phone. Currently going back to stock before trying unlock boot loader again Cheers
wilvelas said:
Thanks for dumbing this one down, but I think I managed to screw things up anyways.
I've gotten the dreaded "Security Error" and can't seem to get the phone to be recognized by the computer anymore. I can get the phone to the S/W ugrade screen, the drives load, but the adb, the lg software, fastboot, all don't recognize the phone. Did you ever run into something like this? If so, what methods did you use to unbrick?
Thanks!
Click to expand...
Click to collapse
yeah, he unbricked it. He'll have to answer that when he gets back on.
I'll be trying the unlock tutorial today.
xxx
Did you do this without a sim that may be very important
Sent from my LG-P769 using xda app-developers app
omgbossis21 said:
Did you do this without a sim that may be very important
Click to expand...
Click to collapse
i beleive i did, but, i'll have to go back and look at the video to be sure. however, the first time i did this, the sim was in the phone, so i don't think it matters.
omgbossis21 said:
Did you do this without a sim that may be very important
Sent from my LG-P769 using xda app-developers app
Click to expand...
Click to collapse
Okay... I'm going to trust you and try your method again tonight. Can you explain if you copied over the Lelus root while flashing and if you flashed the L9Recovery to flash the radio?
I think with this phone, the smallest details are what open the gates to freedom. How many hours did you spend sending the adb commands? I started feeling like a crazy person after a while.... lol.
Sent from my LG-P769 using XDA Premium 4 mobile app
xxx
when i try to run the adb reboot oem-unlock command it says device not found. Even though i can do adb shell and su. What gives?
---------- Post added at 03:30 PM ---------- Previous post was at 03:20 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
does it have anything to do with me uninstalling all the bloat?
bulletfreak said:
when i try to run the adb reboot oem-unlock command it says device not found. Even though i can do adb shell and su. What gives?
---------- Post added at 03:30 PM ---------- Previous post was at 03:20 PM ----------
does it have anything to do with me uninstalling all the bloat?
Click to expand...
Click to collapse
In shell its just reboot OEM-unlock
Sent from my LG-P769 using xda app-developers app
how many times did you run the command?
Related
我的手机amaze，已经官方解锁了，super-cid写入失败，从新写入系统时，失败了。可是电脑端显示成功，我重启手机，手机开不开机，也进不去HBOOT，屏幕只能显示四角各有个感叹号，中间一个灰色的'HTC'的字样，怎么办求解！知道答案的请发 Edited by Moderator.
——————我是一个中国学生！翻译不好请见谅！—————————————————————————————————————————
My mobile phone amaze, have unlock, super-cid write failure, from the new writing system, failed. But the computer terminal display success, I restart mobile phone, mobile phone to open the boot, cannot also go in the HBOOT, the screen shows only four corners of an exclamation point, the middle of a grey 'HTC'', how to do to solve! Know the answer please Edited by Moderator. Mr. lu! Thank you very much.
boxboooon said:
我的手机amaze，已经官方解锁了，super-cid写入失败，从新写入系统时，失败了。可是电脑端显示成功，我重启手机，手机开不开机，也进不去HBOOT，屏幕只能显示四角各有个感叹号，中间一个灰色的'HTC'的字样，怎么办求解！知道答案的请发 [email protected] 卢先生！谢谢你们！
——————我是一个中国学生！翻译不好请见谅！—————————————————————————————————————————
My mobile phone amaze, have unlock, super-cid write failure, from the new writing system, failed. But the computer terminal display success, I restart mobile phone, mobile phone to open the boot, cannot also go in the HBOOT, the screen shows only four corners of an exclamation point, the middle of a grey 'HTC'', how to do to solve! Know the answer please [email protected] Mr. lu! Thank you very much.
Click to expand...
Click to collapse
当你用4个惊叹号宏达屏幕上，尝试做此命令
fastboot devices
然后让我们知道，如果你看到什么
___________________________________
When you are on the HTC screen with 4 exclamation marks, try to do this command
fastboot devices
and then let us know if you see anything
Sorry if the chinese is bad, I'm using google translate
Keylogger_0 said:
当你用4个惊叹号宏达屏幕上，尝试做此命令
fastboot devices
然后让我们知道，如果你看到什么
___________________________________
When you are on the HTC screen with 4 exclamation marks, try to do this command
fastboot devices
and then let us know if you see anything
Sorry if the chinese is bad, I'm using google translate
Click to expand...
Click to collapse
Unable to access FastBoot,Only one interface
boxboooon said:
Unable to access FastBoot,Only one interface
Click to expand...
Click to collapse
Did you plug in usb cable? Do you have fastboot drivers installed on the computer?
Keylogger_0 said:
Did you plug in usb cable? Do you have fastboot drivers installed on the computer?
Click to expand...
Click to collapse
I don't have this mode drive, only HTC sync. Oh, God, my mobile phone is dying! Can only send HTC to repair? Though I know I repaired the possibility is very small, but I am very grateful to you Keylogger_0! Thank you. Thank you XDA!
谢谢Keylogger_0!祝你健康快乐~
boxboooon said:
I don't have this mode drive, only HTC sync. Oh, God, my mobile phone is dying! Can only send HTC to repair? Though I know I repaired the possibility is very small, but I am very grateful to you Keylogger_0! Thank you. Thank you XDA!
谢谢Keylogger_0!祝你健康快乐~
Click to expand...
Click to collapse
You don't need to send to HTC for repair. More likely than not, we can fix it. If not, then yes, you send to HTC.
Okay, I can't read chinese, which makes things difficult.. but all the answers will require the user to be able to read some english anyways, so...
First: What did you do before the issue happened? Did you try to install the RUU? Were you going for s-off? What EXACTLY did you do before the issue.
Second: What happens when you turn on the phone while holding the down volume button? The feedback I see from people having this issue, it seems most are able to access the bootloader..
Third: Did you google "4 exclaimation marks htc"? There are a LOT of answers out there that may help you, and I have yet to find anything that says your device is bricked..
As this is the first time I have seen someone have your issue the most important question is "WHAT DID YOU DO BEFORE ISSUE".. so we can make sure people do NOT do that! The community can probably help if you can work around the language barrier a bit.
Silentbtdeadly said:
Okay, I can't read chinese, which makes things difficult.. but all the answers will require the user to be able to read some english anyways, so...
First: What did you do before the issue happened? Did you try to install the RUU? Were you going for s-off? What EXACTLY did you do before the issue.
Second: What happens when you turn on the phone while holding the down volume button? The feedback I see from people having this issue, it seems most are able to access the bootloader..
Third: Did you google "4 exclaimation marks htc"? There are a LOT of answers out there that may help you, and I have yet to find anything that says your device is bricked..
As this is the first time I have seen someone have your issue the most important question is "WHAT DID YOU DO BEFORE ISSUE".. so we can make sure people do NOT do that! The community can probably help if you can work around the language barrier a bit.
Click to expand...
Click to collapse
1：问题发生前，我在试图写入“super-cid” 但是写入失败，原因是没有s-off。在这时，手机的情况是：官方解锁，没有s-off。
2：打开手机，按住下音量按钮时，就是图上的那样，无法进入hboot
提醒别人不要用线刷的方法将官方的zip解锁包第二次刷入官方解锁的手机了!因为这样做会使字库里的数据被擦掉却没有再次写入！
我是学生，现在开学了，回复很慢见谅~
1: problems before they occur, I was trying to write " super-cid " but write failed, because there is no s-off. At this time, the mobile phone is: unlock, no s-off.
2: open mobile phone, press and hold the volume buttons, is a map of it, can not enter the HBOOTRemind the others do not use wire brush method will be the official zip unlock the package second brush into the official unlocked mobile phone! Because it will make in the font data erased but not write again!I am a student, school now, the reply is very slow. ~
boxboooon said:
1：问题发生前，我在试图写入“super-cid” 但是写入失败，原因是没有s-off。在这时，手机的情况是：官方解锁，没有s-off。
2：打开手机，按住下音量按钮时，就是图上的那样，无法进入hboot
提醒别人不要用线刷的方法将官方的zip解锁包第二次刷入官方解锁的手机了!因为这样做会使字库里的数据被擦掉却没有再次写入！
我是学生，现在开学了，回复很慢见谅~
1: problems before they occur, I was trying to write " super-cid " but write failed, because there is no s-off. At this time, the mobile phone is: unlock, no s-off.
2: open mobile phone, press and hold the volume buttons, is a map of it, can not enter the HBOOTRemind the others do not use wire brush method will be the official zip unlock the package second brush into the official unlocked mobile phone! Because it will make in the font data erased but not write again!I am a student, school now, the reply is very slow. ~
Click to expand...
Click to collapse
Download this attachment, extract it to desktop, and then run Vars.bat file and attach the file DIAGNOSTIC.LOG when its done
Don't forget to attach the file 'DIAGNOSTIC.LOG' which will look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_______________________________________
下载这个附件，解压缩到桌面，然后运行Vars.bat文件和附加文件DIAGNOSTIC.LOG时
不要忘记附加文件“DIAGNOSTIC.LOG”这看起来像这样：
Edit: English was included. Thread open.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice
Sent from my HTC One X, using XDA Premium
http://forum.xda-developers.com/announcement.php?a=81
I'm still willing to help, especially when someone has a unique problem.. I think it would be helpful to know what he did before the issue happened, that would help more in troubleshooting or keeping the issue happening for others. This is the first time I've seen someone with this issue.
Sent from my HTC_Amaze_4G using xda app-developers app
Alright. My current phone I was using broke (screen cracked) and I decided to use my old phone, the Droid Razr to get me by until I get a new phone. My Razr was previously rooted on JB when I left it a few years back. It works fine, except it was running slow. It had bootstrap and Safestrap installed. I'm pretty sure at the original time of getting JB on the razr, you had to use bootstrap first and then switch to Safestrap since its safer? However, I forgot this at the time. I wanted to try clearing the cache on the phone to see if it sped it up. However, I guess I uninstalled safestrap and switched it to bootstrap because i used the bootstrap recovery out of ignorance. When I turn on the phone, I get the "Encryption Unsuccessful" message.
I've tried doing the format option it gives but it just restarts the same every time. I've done some researching and it appears I've soft bricked it. I've been reading that the only way to fix it is by using fastboot to wipe the phone to factory settings. I have all the necessary files to do so. I've been working on this for about two days now. However, fastboot does not seem to recognize my phone. I have the drivers installed. When I plug it in normally when it is not in fastboot mode, my PC shows the XT912 under hardware plugged in via USB. But when I put it in fastboot mode, it does not recognize it and it isn't shown in my ADB devices list. What do I do here? I really need this phone to work and I am willing to do whatever it takes to it. I don't care if I have to wipe it/lose root any of that. Please help me. Im not one to make threads of issues that others have but no one elses thread has helped me.
MeltingHolster said:
Alright. My current phone I was using broke (screen cracked) and I decided to use my old phone, the Droid Razr to get me by until I get a new phone. My Razr was previously rooted on JB when I left it a few years back. It works fine, except it was running slow. It had bootstrap and Safestrap installed. I'm pretty sure at the original time of getting JB on the razr, you had to use bootstrap first and then switch to Safestrap since its safer? However, I forgot this at the time. I wanted to try clearing the cache on the phone to see if it sped it up. However, I guess I uninstalled safestrap and switched it to bootstrap because i used the bootstrap recovery out of ignorance. When I turn on the phone, I get the "Encryption Unsuccessful" message.
I've tried doing the format option it gives but it just restarts the same every time. I've done some researching and it appears I've soft bricked it. I've been reading that the only way to fix it is by using fastboot to wipe the phone to factory settings. I have all the necessary files to do so. I've been working on this for about two days now. However, fastboot does not seem to recognize my phone. I have the drivers installed. When I plug it in normally when it is not in fastboot mode, my PC shows the XT912 under hardware plugged in via USB. But when I put it in fastboot mode, it does not recognize it and it isn't shown in my ADB devices list. What do I do here? I really need this phone to work and I am willing to do whatever it takes to it. I don't care if I have to wipe it/lose root any of that. Please help me. Im not one to make threads of issues that others have but no one elses thread has helped me.
Click to expand...
Click to collapse
Windows 7? 8? 10?
Did you tried all usb ports?
Uninstall all moto drivers,reboot computer,install them again.
Here are the newest moto drivers
http://forum.xda-developers.com/showthread.php?p=59139823
Sent from my Razr XT910
Thanks for the quick reply. I'm using Windows 8.1. I did what you asked, and when I turned my phone on after re-installing the drivers, it installed the device normally. It shows this in device manager.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It still wont recognize it in ADB.
MeltingHolster said:
Thanks for the quick reply. I'm using Windows 8.1. I did what you asked, and when I turned my phone on after re-installing the drivers, it installed the device normally. It shows this in device manager.
It still wont recognize it in ADB.
Click to expand...
Click to collapse
That's a common problem with Windows 8,on Windows 7 everything is ok
Sent from my Razr XT910
So that means i cant fix it?
Sent from my SM-T217S using XDA Free mobile app
MeltingHolster said:
So that means i cant fix it?
Sent from my SM-T217S using XDA Free mobile app
Click to expand...
Click to collapse
You can fix it with Windows 7
Sent from my Razr XT910
MeltingHolster said:
So that means i cant fix it?
Sent from my SM-T217S using XDA Free mobile app
Click to expand...
Click to collapse
What is on AP Fastboot screen, complete text?
sd_shadow said:
What is on AP Fastboot screen, complete text?
Click to expand...
Click to collapse
It says AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16GB
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Hello Everyone,
I pray all had a wonderful weekend. I am a frequent visitor to this site and love all the advice and work many of you do. Thanks for all the support this far!
I searched through the forum to see if I could find some similar issues but was unsuccessful at finding it. I currently have the LG V10 (LG-H901) by T-Mobile running 5.1.1. I was able to successfully unlock the bootloader via fastboot. I came across the issue when I tried to install TWRP-2.8.7.1-h901.img. It would go through fine on CMD but just would not go through on the phone. The fastboot menu would boot up strangely (After unlocking the bootloader) with the text all pixelated in a way. You are unable to read the words. The phone works fine. It happened to me on two phones so it must be something that I am doing incorrectly but just can't find it on Google or this forum. I apologize if I messed and and hate to start a new thread if its here but no such luck finding it. Anyone experience this before or might have some advice? Thanks!
latinpride613 said:
Hello Everyone,
I pray all had a wonderful weekend. I am a frequent visitor to this site and love all the advice and work many of you do. Thanks for all the support this far!
I searched through the forum to see if I could find some similar issues but was unsuccessful at finding it. I currently have the LG V10 (LG-H901) by T-Mobile running 5.1.1. I was able to successfully unlock the bootloader via fastboot. I came across the issue when I tried to install TWRP-2.8.7.1-h901.img. It would go through fine on CMD but just would not go through on the phone. The fastboot menu would boot up strangely (After unlocking the bootloader) with the text all pixelated in a way. You are unable to read the words. The phone works fine. It happened to me on two phones so it must be something that I am doing incorrectly but just can't find it on Google or this forum. I apologize if I messed and and hate to start a new thread if its here but no such luck finding it. Anyone experience this before or might have some advice? Thanks!
Click to expand...
Click to collapse
If it happened on two phones. Then it's likely a step you are overlooking. The biggest thing you need to consider when working on a new device is making sure you have ALL prerequisites before flashing, fastbooting, adb, etc.
- Make sure you have LG usb drivers installed, then reboot your PC.
- Install ADB system-wide
- Turn on OEM unlock in your Dev-settings
- Make sure USB debugging in ticked AND you allow always for the connected PC.
Then start here: http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
Read Read Read Read and Read.
I will give this another try when I get home from work. I am pretty sure I did all that was said but like you stated seems I missed a step somewhere. By going through the steps here over again, even though I went through I might have gone through them already, would that cause any damage? If not I will just go through step one all over again. I did not get the instructions from here so I want to start from the very beginning with the link you posted. Thanks!
latinpride613 said:
I will give this another try when I get home from work. I am pretty sure I did all that was said but like you stated seems I missed a step somewhere. By going through the steps here over again, even though I went through I might have gone through them already, would that cause any damage? If not I will just go through step one all over again. I did not get the instructions from here so I want to start from the very beginning with the link you posted. Thanks!
Click to expand...
Click to collapse
@latinpride613
Did u try my KlicKiT tool.... http://forum.xda-developers.com/showthread.php?p=64598329 as long as u have LG v10 driver installed ... See if that work for you.... Check post #3 for instruction how to install.... But basically just one click the tool do the rest for you to unlock BL and install twrp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That is awesome. I'll give that a shot as soon as I get home. Thank you!
latinpride613 said:
That is awesome. I'll give that a shot as soon as I get home. Thank you!
Click to expand...
Click to collapse
Make sure you did not forget , or it got reset, go into developer settings and enable Oem Unlock, I know 2 people that kept missing this step for a week.
Watcher64 said:
Make sure you did not forget , or it got reset, go into developer settings and enable Oem Unlock, I know 2 people that kept missing this step for a week.
Click to expand...
Click to collapse
Thanks! I've made sure that's been on from the get go. Forgot I had class today so I am waiting to fly outa here to try this out. I will be sure to update this thread with my results. Any other advice is in the mean while is always welcome.
I first checked if all things above were checked off in the Dev options. They both were the Enable OEM unlock and USB Debugging. I then went in and tried the one click. It booted into fastboot fine but when it gets to the point where its suppose install TWRP the phone itself does nothing. CMD executes fine. The phone just stays where the screen tells you some of the fastboot instructions. From some other sites and videos online it suppose to install TWRP and you can boot right into it.
When you restart the phone you get the message that the bootloader is unlocked on the top left corner. I can't get to the recovery to see if it was even installed. Doesn't seem like it was.
This last step is killing me as I know once I get through this I am rooted. I can try doing it step by step again but feel like I will get the same results. Worth a shot anyways.
When I do "adb reboot recovery" I get a dead android with a red exclamation mark.
latinpride613 said:
I first checked if all things above were checked off in the Dev options. They both were the Enable OEM unlock and USB Debugging. I then went in and tried the one click. It booted into fastboot fine but when it gets to the point where its suppose install TWRP the phone itself does nothing. CMD executes fine. The phone just stays where the screen tells you some of the fastboot instructions. From some other sites and videos online it suppose to install TWRP and you can boot right into it.
When you restart the phone you get the message that the bootloader is unlocked on the top left corner. I can't get to the recovery to see if it was even installed. Doesn't seem like it was.
This last step is killing me as I know once I get through this I am rooted. I can try doing it step by step again but feel like I will get the same results. Worth a shot anyways.
When I do "adb reboot recovery" I get a dead android with a red exclamation mark.
Click to expand...
Click to collapse
@latinpride613
Ok try this.....see if this work for you
1. From extracted KlicKiT folder that where ever you saved let say dektop hold shift then right click.... Open cmd command here.
2. Type these three commands in order one by one then enter.
Hope that work for you...[emoji2] let me know ... And seem like twrp didn't install correctly when you try KlicKiT tool.
ted77usa said:
@latinpride613
Ok try this.....see if this work for you
1. From extracted KlicKiT folder that where ever you saved let say dektop hold shift then right click.... Open cmd command here.
2. Type these three commands in order one by one then enter.
Hope that work for you...[emoji2] let me know ... And seem like twrp didn't install correctly when you try KlicKiT tool.
Click to expand...
Click to collapse
This worked!!! Oh man!!! Thank you, so much!! Everyone, I thank you for reading my post and giving me advice. You all are great!
latinpride613 said:
This worked!!! Oh man!!! Thank you, so much!! Everyone, I thank you for reading my post and giving me advice. You all are great!
Click to expand...
Click to collapse
Im glad that work for you Sir.... That's all XDA about.... Giving back and help others members....[emoji106]
You guys are amazing and Ted, I thank you again (As I don't have access to the "Thank you" button quite yet). Already installed my first ROM on my LG V10.
ted77usa said:
@latinpride613
Did u try my KlicKiT tool.... http://forum.xda-developers.com/showthread.php?p=64598329 as long as u have LG v10 driver installed ... See if that work for you.... Check post #3 for instruction how to install.... But basically just one click the tool do the rest for you to unlock BL and install twrp
Click to expand...
Click to collapse
your tool worked for me, thanks.
What Rom is that
latinpride613 said:
This worked!!! Oh man!!! Thank you, so much!! Everyone, I thank you for reading my post and giving me advice. You all are great!
Click to expand...
Click to collapse
Wht Rom Are U Using
I need the sctok rom for my zte prestige N9132, please help with this problem.
Rom stock Zte prestige n9132
Hi, Did you get the stock rom of this device? if you did it please give me the information from where you download it, I also having this bootloop problem, Thank you:laugh:
I Need Rom Stock ZTE PRESTIGE N9132 BOOST MOBILE Please.. :crying:
I Need Rom Stock, My ZTE PRESTIGE N9132 Boost Mobile is Bricked, please give me the information from where you download :crying:
Feb. 23, 2017......Please Help
Please help, i have been everywhere on the net and tried every possible method presented. adb, side load, factory reset, wipe/cache. nothing works. rooted my phone, later unrooted because i was gonna take it to be fixed because softkeys stopped workin, but downloaded button savior instead. then eventually wanted mt phone root again. forgot to adb "reboot disemmcwp" first. long story short, bricked phone, stuck at zte logo. i can enter the recovery mode. but it will not allow me to update from sd card for some reason. my usb debugging is not turned on. and most importantly I cannot for the life of me find stock rom or any other rom for this damn phone. as mentioned, i already did factory reset and wiped my data but it did not solve issue. i read in another forum that disabling certain apps could cause a soft brick after doing a factory reset, i did have some apps disabled. so dont know if that is the cause. I know how to flash firmware, roms, and recoveries. But i cannot find a custom rom, or a custom recovery for the ZTE Prestige N9132......so can someone please give me a copy of the stock firmware, or kindly direct me as to where i can download it???? I have scoured the internet for literally 4 days now and cannot find any firmware for this model phone at all......PLEASE HELP!!
6/1/2017 Phone Softbricked
my phone is rooted but last night after it died on me it didn't want to charge it kept turning on and off so this morning I did a hard reset also I charged the physical battery and well after the hard reset it showed
missing bitmap stage_empy
(code-7)
missing bitmap stage_fill
(code-7)
It took a charge and would take me to the setup and then stop at Update Phone and wont go no further.
I already tried live chat with zte and all they want is to pay to get phone repaired
someone help we need the stock rom and I would appreciate it. Thanks
Had mine rooted too and working perfectly, but was trying to replace stock dailer with a custom one. I meant to uninstall the stupid Smart Contacts bloatware and freeze the dailer to see if that caused any problems. But instead I did that backwards by mistake, but I had made backups ... But for some reason couldn't get the backup to reinstall correctly. Titanium was saying the dailer was reinstalled but app crashed at startup. after several attempts I gave up and tried resetting phone to see if that my fix it since it was a default app. Well now I can't get past setup mode. Gets stuck in a loop trying to verify my google account. I also recall after I messed with dailer I couldn't get google to sync contacts, which is why I was so concerned about putting it back. Anyways no stock firmware to be found on net, guess I'm SOL. I think we sould make a post for how to root this phone, b ecause I was a process. And when noobs come looking to see we ask them to get that stack firmware for us before that root. I never did find an easy guide on here just had to search around till I found that piece of adb code that unlocked our bootloader and allowed us to root.
https://androidforums.com/threads/z...ax-and-other-zte-phones.1040331/#post-7317521
Code:
adb reboot disemmcwp
If we can get them to enter the adb code and then copy firmware with adb, would that work? Haven't fooled around with adb to much so I really don't know.
Edit: Just to clarify, I say we should make a new post explaining how to root this phone because the whole time I was searching how to root my prestige never once did this thread come up. If it did, I probably had been able to help those before me and those after me, but to late now... Now I'm in the same boat. Reminds me of the broken soda machine that people keep putting money in all day instead of some one taking time to put a note up warning others to not lose their money too. I'm not that person I now want to help stop other people from making the sames mistakes over and over that seems to be a pattern here.
I found really the only way to root the prestige is with 360 root, not sure if it's actually rooted but I can do everything a rooted phone can but it's only temporary, I have to re root it every time I turn it off or on. 360 is in Japanese but if you download an translation app such as Microsoft translate ( that's better than Google translate in my opinion ) you can pretty easily get your phone rooted. I've used king root and had it rooted for maybe 2 hours then it rebooted by itself and lost it but yeah 360 root in my opinion is the easiest way to root it without a computer.
I found and download firemware on easy-firmware.com/home/browse/category/id/27213/ but phone not seen in fastboot mode, update from sd card not work too. if volume + - and power on phone seen like zte handset diagnostic interface. Please help, how restore this phone?
Here is a stock rom 333770B2622N9132V1.0.0B12
mega.nz/#!avIDVZ5R!8PVq1KloLCyUiwd4kQsS5SrG4XJU0bdZv4F0Wa2KvVk that i found and uploaded there. The phone is set to recovery <3e> N9132V1.0.0B013, but after set this firmware in update from sd card, i get an error:
E: footer is wrong
E: signature verification failed
Fastboot not working, phone is not determined.
Help, how unbrick this device?
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
mega.nz/#!avIDVZ5R!8PVq1KloLCyUiwd4kQsS5SrG4XJU0bdZv4F0Wa2KvVk
zte n9132 prestige brick
Am experiencing same thing as you are, i download my n9132 rom from easy-firmware.com, i just cant update it through recovery,i think probably what d cause, is d build number in d recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is not desame as dat of d download file
.
think if i can get a file dat match d bulid number in recovery, it will flash successfully
any solution to unbricking dis device, help guys @allexa1123
---------- Post added at 11:45 AM ---------- Previous post was at 11:42 AM ----------
Am experiencing same thing as you are, i download my n9132 rom from easy-firmware.com, i just cant update it through recovery,i think probably what d cause, is d build number in d recovery
is not desame as dat of d download file
.
think if i can get a file dat match d bulid number in recovery, it will flash successfully
any solution to unbricking dis device, help guys @allexa1123
I think not, because you have N9132V1.0.0B09 but in the downloaded file higher N9132V1.0.0B12 Therefore, it should be updated without replacement, most likely the firmware is broken. Unfortunately I can't restore this phone either. I think you can restore from ZTE Handset Diagnostic Interface(DFU), but how, somebody knows?
do u any any testpoint for dis device @Alexa1123
---------- Post added at 03:03 PM ---------- Previous post was at 02:50 PM ----------
i can actually flash it with NCK dongle or UMT QCFIRE
but it requires the device to be in Edl mode, and i dont have EDL Cable
if i can find any pinout or test point for d device
i will be able to point it in EDL Mode and flash it..
Do have any idea?
---------- Post added at 03:04 PM ---------- Previous post was at 03:03 PM ----------
i can actually flash it with NCK dongle or UMT QCFIRE
but it requires the device to be in Edl mode, and i dont have EDL Cable
if i can find any pinout or test point for d device
i will be able to point it in EDL Mode and flash it..
Do have any idea?
Am still waiting for solution
Sent from my iPhone using Tapatalk
there is no solution in the internet anywhere, phones probably will remain bricks with us) i try to flash qfill with different prog_emmc_firehose_8909 , but have an error
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
в QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
в QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
what do you think, is d problem,
And nobody has even provided us with any solution for [email protected]
---------- Post added at 01:30 PM ---------- Previous post was at 01:28 PM ----------
If there is any way, we can boot the device to EDL Mode
unfortunately, I have not found any solution to this issue either. appealed in support of zte, but they did not give a link to the stock firmware. I'll try again through qfill
ok. please keep me posted
Any solution friend
Sent from my iPhone using Tapatalk
I'm in the same boat. Searched the whole web and just nothing, permanent brick?
It is a fairly new device so I haven't seen anything on it but I'm hoping someone could point my in the right direction. Any info would be helpful. Thanks!
Same here, looking for root!
Coolpad root
Good luck on this to you I am working as well and will post what I find
Picked up one of these today, we just started working on it a few minutes ago, I'll post the method once done. This could be hours, days, months, who knows, We do have fastboot and the Coolpad Kit from elsewhere on the forums so it shouldn't be hard. But we are working on it.
Same here I really want root, oddly for fastboot oem unlock it doesn't unlock , I have oem unlock enabled in developer options but when I run the command fastboot flashing unlock or fastboot oem unlock or pretty much any command besides fastboot getvar all it comes back with something like FAILED remote unknown command and I have no idea why I have the cool pad legacy/lithium cp3705a if anyone can lend me some knowledge on why the fastboot commands don't work that would be nice I was going to flash a gsi and try to patch a stock boot image via magisk but I can do anything without unlocking the bootloader first, I'm hoping it's not a kernel related issue
sawclan22 said:
Same here I really want root, oddly for fastboot oem unlock it doesn't unlock , I have oem unlock enabled in developer options but when I run the command fastboot flashing unlock or fastboot oem unlock or pretty much any command besides fastboot getvar all it comes back with something like FAILED remote unknown command and I have no idea why I have the cool pad legacy/lithium cp3705a if anyone can lend me some knowledge on why the fastboot commands don't work that would be nice I was going to flash a gsi and try to patch a stock boot image via magisk but I can do anything without unlocking the bootloader first, I'm hoping it's not a kernel related issue
Click to expand...
Click to collapse
Yeah still working on it, waiting for some pie PoCs to come out. But fastboot is borked. I've requested the source code from them we'll see how that goes, doubt it will go anywhere. Can't even find the proper drivers for it. MTKTool is outdated so it can't even get a read on the FS to make a scatter file. All one click apps I tried didn't work so I wouldn't recommend those. OneClickRoot said it could root it but I'm not about to pay them to find out.
I did find a binary(locksettings) in system that allows you to set and remove passwords via command line which seems a bit insecure, but possibly exploitable, and an empty "cdrom_install.iso" in /system/etc But It just says:
"This directory contains the raw data that OEMs want to expose
to end-users.
Due to the limitation of mass storage. The cdrom ISO file should
be larger than 600KBytes.
If you put less files into this directory. Then it will create
a dummy file to fill the gap."
With a nice 616KB pad file.
That's all I've been able to get so far.
Thanks for the update that sums up what I've got as well although i didn't see that system img
---------- Post added at 03:51 AM ---------- Previous post was at 03:47 AM ----------
Oddly my device seems to be having some sort of bug. The touchscreen will just randomly lock up , I've reset the device , I realized it doesn't so it in safe mode , so I tried deleted apps from adb shell that did nothing , but since it works in safe mode and the device has project treble support I feel as though flashing a gsi would fix the problem , but I can't so that with a locked bootloader
sawclan22 said:
Thanks for the update that sums up what I've got as well although i didn't see that system img
---------- Post added at 03:51 AM ---------- Previous post was at 03:47 AM ----------
Oddly my device seems to be having some sort of bug. The touchscreen will just randomly lock up , I've reset the device , I realized it doesn't so it in safe mode , so I tried deleted apps from adb shell that did nothing , but since it works in safe mode and the device has project treble support I feel as though flashing a gsi would fix the problem , but I can't so that with a locked bootloader
Click to expand...
Click to collapse
You might want to go through your apps and disable a bunch of the bloat. They had like 3 facebook managers, installers and stuff in there. That could be doing it. I haven't had any such issues but i've only had the phone a few hours and have been in a shell exploring it most of that time.
Update: EDL Mode is accessible. We haven't been able to successfully do anything with it yet due to lack of a firehose, but 9008 mode does work with EDL Cable. If anyone has a SDM450 firehose around that would be ideal.
I already noticed edl mode was there was planning on finding out what to do today , I have a firehouse for the board which is prog_emmc_firehose_8953_ddr.mbn , but I wasn't sure how that worked I'm not to familiar with edl mode or what it can do , also I'm not a dev just an experienced Android / Linux user
---------- Post added at 01:32 PM ---------- Previous post was at 01:30 PM ----------
What would u even use to flash in edl mode? Say a gsi , because there's no stock firmware we can extract , but we can always get a rooted gsi if I'm not mistaken because the device does have project treble support
Sapphiress said:
You might want to go through your apps and disable a bunch of the bloat. They had like 3 facebook managers, installers and stuff in there. That could be doing it. I haven't had any such issues but i've only had the phone a few hours and have been in a shell exploring it most of that time.
Update: EDL Mode is accessible. We haven't been able to successfully do anything with it yet due to lack of a firehose, but 9008 mode does work with EDL Cable. If anyone has a SDM450 firehose around that would be ideal.
Click to expand...
Click to collapse
The firehouse for the oppo a71 has same specs board RAM and soc would that work
sawclan22 said:
The firehouse for the oppo a71 has same specs board RAM and soc would that work
Click to expand...
Click to collapse
I'll see if I can find one. They have the board incorrectly listed as both an MTK board and as an msm8953 even though from what I've been able to find msm8953 is strictly the snapdragon625. And Snapdragon 450 doesn't have an msm designation. This thing is a mess inside.
It's been awhile since I've done this mind you. Android has changed a bunch since the 2.X and 4.X days. I've been on a Nexus 6P for years which is open by default.
Wish it was as easy as installing gingerbreak and tapping root like the old days. Lol
---------- Post added at 03:14 PM ---------- Previous post was at 03:03 PM ----------
sawclan22 said:
What would u even use to flash in edl mode? Say a gsi , because there's no stock firmware we can extract , but we can always get a rooted gsi if I'm not mistaken because the device does have project treble support
Click to expand...
Click to collapse
I would get temp root via a RCE or EoP pull the boot image, modify it and flash it in EDL therefore enabling fastboot and making the phone ready for TWRP. After that it's just a matter of writing a program that does this for you and the phone would be ready for development.
Well I've done all I know how to do I'll just leave it to you guys and keep an eye on this forum
Hey Sapphires,
Have you generated the root process for the Coolpad Legacy yet?
[email protected]
manoftech said:
Hey Sapphires,
Have you generated the root process for the Coolpad Legacy yet?
[email protected]
Click to expand...
Click to collapse
Waiting for a poc or a firehouse to surface. Android 9 doesn't have many exploits available yet.
Device Unlocking Process Status?
Have we got anywhere with the device unlocking and rooting procedure with this device.
djdruin said:
It is a fairly new device so I haven't seen anything on it but I'm hoping someone could point my in the right direction. Any info would be helpful. Thanks!
Click to expand...
Click to collapse
dravenz7 said:
Have we got anywhere with the device unlocking and rooting procedure with this device.
Click to expand...
Click to collapse
Nope. we are also NOT vulnerable to CVE-2019-2215 at least on my device with the June Patch. Just waiting for a valid exploit.
This is as far as it gets.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You guys suck
diag port
I don't know if you guys figured this part out yet or not but I was able to open the engineering menu and turn on the diagnostics port and modem. I'm not very familiar with using it to my advantage but I used quick shortcut maker to open it. It was under yulong labtest I believe. One of the menus are all in chinese so I'm not real sure what else it would let you access.
TreyVega said:
You guys suck
Click to expand...
Click to collapse
Well let's see you do something there buddy, obviously you're the expert on the subject.
Cracking enterprise level security isn't just clicking a button. and you ain't paying me. I have a stack of phones and other devices to work on and other more pressing things to do with my life. So, kindly, take your opinion and shove it, root will be released when it's released.
m3nty said:
I don't know if you guys figured this part out yet or not but I was able to open the engineering menu and turn on the diagnostics port and modem. I'm not very familiar with using it to my advantage but I used quick shortcut maker to open it. It was under yulong labtest I believe. One of the menus are all in chinese so I'm not real sure what else it would let you access.
Click to expand...
Click to collapse
EDL mode won't help without the proper mbn, none of which that are publicly available work. Or if you're talking about the hidden flasher activity we found that awhile ago but I haven't really looked too far into it as i don't have a USB-C OTG drive.