Launcher Issue - Need Help - Android Q&A, Help & Troubleshooting

Hello guys
i have an android phone and i was using GO LAUNCHER on my phone.
my phone was rooted and i had Freezed System LAUNCHER using LINK2SD.
Unfortunately i forgot that the System launcher was frozen and i restored my phone from Factory Reset and ultimately it removed GO LAUNCHER.
Hence system launcher was frozen so Phone was stucked on SAMSUNG Logo.
I went into Android recovery using Power and Volume button and Wiped Data from there.
Now whenever i turn on my phone it remains Stuck on ANDROID logo...
Samsung Logo is vanished now......
Kindly help me on this issue....
I think there could be 2 solutions only
1. Install new launcher, which seems difficult as phone is stucked on Logo,
2. Flash using ROM, but i can't find Rom for my device....
Kindly help me or advice....
My phone specifications are below
Samsung GT i9500 (Copy)
Processor is MTK 6575
Android 4.2.2
CPU TYPE:6575
Hardware version:CB00
Software version:E201

If you are able to go DOWNLOAD MODE (Power+Volume Down).
Then FLASH a Official Stock Firmware zip file using ODIN v1.85
Done

itsmepawan said:
If you are able to go DOWNLOAD MODE (Power+Volume Down).
Then FLASH a Official Stock Firmware zip file using ODIN v1.85
Done
Click to expand...
Click to collapse
can u help me in finding official stock firmware for this phone?
i can't find it

There you go, follow below link
http://m.ibtimes.com/android-422-je...alaxy-s4-gt-i9500-manual-installation-1237099
Don't get messed up by reading in hurry. If you are a beginner then Read instructions carefully and make sure you download the file your phone model only. Or else your device will be bricked.
Good luck mate :thumbup:

itsmepawan said:
There you go, follow below link
Don't get messed up by reading in hurry. If you are a beginner then Read instructions carefully and make sure you download the file your phone model only. Or else your device will be bricked.
Good luck mate :thumbup:
Click to expand...
Click to collapse
Well mate as i have said that my phone has MTK Based Processor so these firmwares won't work on it

Wikihaxors said:
Well mate as i have said that my phone has MTK Based Processor so these firmwares won't work on it
Click to expand...
Click to collapse
Oooh I don't have much knowledge on all that, like different based processor. I told you my recommendations, to what my knowledge recommends.
Make sure you search and get working Firmware for your device.
Try to ask in your device section on Xda.
They will migrate you to right path.
After getting, flash and all will be fine.

Related

Bricked my phone. help? maybe? please?

So, today I updated my phone to ICS and rooted my phone and just like a little kid i started playing with things and long story short I'm pretty sure I bricked it. I think what happened just before I think it bricked is that I was downloading and installing a ROM from ROM Manager. It went through the whole start up process(asking for gmail for syncing and all that nonsense) and when i tried to download another app from the google store i got a "error with purchasing" or something like that so i restored all the info and stuff i had on ROM manager and titanium back up and tried it again. no luck. I tried going for factory reset but it didn't work(all three ways). So i panicked and went to superuser and clicked the unroot choice. Really stupid choice since now i can't use any of the apps to get into bootload. Now I can't get to recovery, bootload, or any other of those things even with hardware.
So in summary here are the symptoms:
1. can't get into any other modes (recovery, bootload, etc.)
2. Get the error "Error processing purchase.[DF-BPA-13]" when trying to download something off google play.
3. Charges extremely Slow.
4. Phone works normally. goes through normal boot. I can text, browse, do all standard functions.
5. When turning off the phone it gets hung up at goodbye.
6. Can't perform hard resets.
More information:
Model Number: SGH-T989
Android Version: 4.03
Please Help! I'm begging you! and if you need more information just let me know. and one thought I would have in fixing it is using a USB jig. But i wouldn't know what to do once I got back into the other modes.
you can search how to fix it here on xda, but maybe this will give you a lead http://forum.xda-developers.com/showthread.php?t=1805474
hope you get it fixed!
Right well there is 2 things you can do:
1) use a USB jig and get into download mode, and then flash a stock ROM
2) Do an adb restart into recovery using android SDK
Let me know if it work?
Sent from my GT-I9100 using xda premium
This is a forum for the international version, i9100. Your device T989 is a completely different device and has its own forum.
http://forum.xda-developers.com/forumdisplay.php?f=1329
Sent from my Galaxy S2 GT i9100
I don't think the phone is "hard bricked"
what version of ICS was you on?
UrbanDesigns said:
I don't think the phone is "hard bricked"
what version of ICS was you on?
Click to expand...
Click to collapse
I'm kind of a noob, sorry. But I think I'm on 4.0.3 . Or do you mean like t989uvle1
Try to reflash an stock firmware again ? 
Infinite96 said:
Try to reflash an stock firmware again ? 
Click to expand...
Click to collapse
Where would I get the stock firmware and how would I go about it . my Odin still works.
Infinite96 said:
Try to reflash an stock firmware again ? 
Click to expand...
Click to collapse
i reflashed a stock recovery and it works just fine now. Thanks a lot!

[Q] Samsung Galaxy S2 won't boot. Recovery mode not accessible.

Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11

[Q] My Galaxy S II died on me

Hello everyone
here's the story from the start:
I was chatting on Skype when my Galaxy S II GT-I9100 suddenly freezed. I removed the battery and booted the phone but it was stock at the Samsung logo.
What happened since then:
1- My device has never been rooted before.
2- I was running official Jelly Bean 4.1.2
3- I have only access to download mode.
4- I tried flashing stock Jelly Bean "I9100XWLSD_I9100OJVLS6_I9100XXLS8_HOME.tar" and "I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar" using Odin 3.07 and Odin 1.83.
5- The device started to show "firmware upgrade encountered an issue ..."
6- Tried to flash stock kernel. "KERNEL_XWLPM"
7- Tried to flash custom kernels. "Siyah-s2-v5.0.1" and "Siyah-s2-v6.0b5"
8- In download mode: Current Binary changed from "official" to "custom" and Custom Binary from "no" to "yes" (3 counts) WHAT IS THIS?
Questions:
1- Is my S II soft bricked or hard bricked?
2- Can I install CWM recovery with my S II in the current situation? I read somewhere in the forum that this could help me install a custom rom.
3- Can I flash custom roms via Odin? I have no problem using any rom available I just want my S II working again
4- Please keep in mind that I'm new to this so I hope that you can provide me with step by step instructions.
5- Thank you everyone in advance for your help.
Flash JB leak:
PDA: LSJ
PHONE: LS6
CSC: LS1
Sent from the little guy
no luck
Try another usb port.
Sent from the little guy
1- tried different usb ports. even usb 3.0 ports
2- tried different Samsung drivers. (kies is not installed)
3- used the usb cable that came with S II.
What about Re-Partitioning the device, will that help? What are the danger of using it?
It won't, it'll likely brick your device.
Install kies, by installing different drivers you're creating conflict.
If it fails, try with another PC/laptop.
Sent from the little guy
downloaded kies; still nothing!
don't you think my S II is bricked already? If so, what options do I have?
It's not.
Keep trying
Sent from the little guy
I almost gave up!
thank you for putting hope in my heart, dude
zMoondanceR said:
I almost gave up!
thank you for putting hope in my heart, dude
Click to expand...
Click to collapse
Since you can still go to "download mode", first recharge your battery till full, get CWR and flash CWR only via ODIN, boot to recovery, format system, cache, data partitions. Obtain any custom ROM, flash with custom rom via CWR. Your device id soft brick only .... have FUN dude !!!
a million thanks x1123
However, I have few questions on my mind:
1- How am I supposed to know that the battery is fully charged while the screen displays "firmware upgrade encountered an issue ..." while charging?
2- Where can I get CWR? Would you be so kind to provide a link?
3- Which custom rom is the most stable that you can recommend?
4- Do I need to flash a new kernel? Which one is the most stable\safe?
thank you so much for all the help
zMoondanceR said:
a million thanks x1123
However, I have few questions on my mind:
1- How am I supposed to know that the battery is fully charged while the screen displays "firmware upgrade encountered an issue ..." while charging?
2- Where can I get CWR? Would you be so kind to provide a link?
3- Which custom rom is the most stable that you can recommend?
4- Do I need to flash a new kernel? Which one is the most stable\safe?
thank you so much for all the help
Click to expand...
Click to collapse
1.first download ics 4.0.3 or 4.0.4 flash in odin
and keep mind when if it is succesfully completed it restar and struck at samsung logo means "s: symbol
remove u r battery and wait for one minute replace the battery and hold down the volume up+menu button+and press the power button u will go to recovery menu now with the help of volume button go to factory reset and press the power button to select and select yes and reboot.
thank you Raghavendra_atp for the advice but I already tried that but my device refused to be flashed due to NAND corruption.
I'd appreciate it if you could read my first post to know more about my current situation. Thank you.
zMoondanceR said:
thank you Raghavendra_atp for the advice but I already tried that but my device refused to be flashed due to NAND corruption.
I'd appreciate it if you could read my first post to know more about my current situation. Thank you.
Click to expand...
Click to collapse
ok tell me that if u going to recover mode and download mode
I can only access download mode
zMoondanceR said:
I can only access download mode
Click to expand...
Click to collapse
If that means u r mobile motherboard is gone it will cost nearly 8000rs sorry for that b'coz i had also same problem
i replace the mother baord in samsung service center

			
				
Have you tried following the guide on how to recover a soft bricked GS2?
http://forum.xda-developers.com/showthread.php?t=1457458
On an off chance, are you trying to flash a rom for an i9100, but maybe you have an i9100G (newer GS2)?
This can be checked on the sticker behind the battery. Just suggesting that because you were previously on the factory rom.
I did follow that guide; tried flashing the provided kernel with no luck.
I'm positive that I have i9100 not i9100G.
How much does a motherboard cost in USD?!!
150 buck but I'm pretty sure this is a drivers conflict.
Keep trying, we've got plenty of threads about that.
Sent from the little guy

[Q] samsung s2 wont stop rebooting

hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
Do you mean you can't even get into recovery? If it can, I would think a data wipe might get the ROM to be able to boot.
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
im new to all of this. when i hold the home button the power button and the vol down button i get a screen telling me installing a custom os could be bad press up to continue i do this and install even the official software but when it reboots it keeps looping on the samsung logo
cglegion said:
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
Click to expand...
Click to collapse
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
the donkey said:
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
Click to expand...
Click to collapse
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
cglegion said:
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
Click to expand...
Click to collapse
that sounds excellent but being new and a bit thick what is a twrp and where would i get one?
still no joy
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
the donkey said:
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
Click to expand...
Click to collapse
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
il give it a go
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
il try that just now cheers
ahhh my heed
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i downloaded the romnuke and the neatrom the instructions say... Boot into Recovery
- Install RomNuke (Does all clean & backup your android folder as well) - Thanks to Hawkerpaul
- Install ROM
- Reboot & Enjoy
but when i unzip the files i cant see any way of gettong romnuke to work i tried odin but it doesnt pick it up is there some other download i need??
still no joy
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
the donkey said:
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
Click to expand...
Click to collapse
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
still no joy
cglegion said:
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
Click to expand...
Click to collapse
ok so i went to cyanogenmod downloaded the newest file for the s2 when i did unzip i get 2 folder meta-inf and system plus a boot.img file. i burned the boot file to a disc but when i check it the disk is empty even though i can see its burned. also when i go to sammobile to get firmare it says no files available...therte must be some way of getting this to work H E L PPPPPPPPPPP
Dude, you're not supposed to be burning anything to discs. The zip file is what the recovery uses to install from. It should include the custom kernal too.
Copy the zipped ROM file to your SD card, put it in your phone and boot into recovery. Assuming you've already flashed the latest custom recovery CWM or TWRP (I prefer TWRP)
From here, to be safe, do a full wipe (That's everything except sd-card: system, data, cache, dalvik-cache)
Now you install/flash the zip file via recovery. Hopefully that completes without error. After that clear cache and dalvik-cache again just to be sure (I do this out of habit)
Reboot.
Hope this helps. I saw you mention something about "efs" and that gives me a bad feeling, read something about needing to back that up before bad things happen. But anyway, good luck :good:

[Q] stuck on Samsung Galaxy S III logo

i have read many threads in many sites but now im confused about wt to do.in short my s3 stuck on Samsung Galaxy S III and it can get into download mode only.
plz help me
wt can i do and from where i should start
start from here maybe...
http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125
sicoooo0 said:
i have read many threads in many sites but now im confused about wt to do.in short my s3 stuck on Samsung Galaxy S III and it can get into download mode only.
plz help me
wt can i do and from where i should start
Click to expand...
Click to collapse
herez another thread you should read.
and if youre gonna perform stock firmware flashing. try to flash what you had before to be safe with coroupted IMEI and EFS problems.
http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847
in this guide, you may directly start with 4th step.
and use ODIN 1.85 and make sure device drivers gets installed in download mode. to do that, install latest kies (depending on if you were on 4.1.2 or 4.3) but make sure kies isn't running when you use ODIN. hope this helps.
more information
this phone was giving to me like this ...i mean in this state like i mentioned before
I dont know any information about the phone
this phone was giving to me like this ...i mean in this state like i mentioned before
I dont know any information about the phone
suspect008 said:
herez another thread you should read.
and if youre gonna perform stock firmware flashing. try to flash what you had before to be safe with coroupted IMEI and EFS problems.
http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847
in this guide, you may directly start with 4th step.
and use ODIN 1.85 and make sure device drivers gets installed in download mode. to do that, install latest kies (depending on if you were on 4.1.2 or 4.3) but make sure kies isn't running when you use ODIN. hope this helps.
Click to expand...
Click to collapse
I dont know any information about the phone
sicoooo0 said:
I dont know any information about the phone
Click to expand...
Click to collapse
cant you get into stock recovery? as samsung logo boots up, its probably you can and try to perform a reset from there. is you can get in, your android version will be there. if you can post a pic here.
oh and in case, press vol up + home + power button and keep pressing untill you see samsung logo appars 2 times to get into the recovery.
Download stock rom and flash it using odin then go into recovery mod by pressing volume up+home +power key and do factory data reset and wipe cache and then reboot
Sent from my GT-I9300 using xda app-developers app

Categories

Resources