i am running donut hd rom
i only formatted my phone so it rebooted and stucked on the SE logo, what should i do ?
please help
ps. BL unlocked and i can go to recovery
omaroid said:
i am running donut hd rom
i only formatted my phone so it rebooted and stucked on the SE logo, what should i do ?
please help
ps. BL unlocked and i can go to recovery
Click to expand...
Click to collapse
If you have a backup from a working OS using CWM Recovery v5.0,2,7 (This is what I have on my 'rooted' X10i) you should restore it.
Otherwise use SEUS or PC Companion and re-install the Sony base OS.
Normally if you can't boot the system the only option is to re-install.
There is an exception to this guideline, where you could install/reinstall sdcard zips where it is known the zip would/could recover whatever previous updates that were made.
You can use a PC to load a zip on a working SDcard and then use CWM recovery(or xRecovery) to install the 'new' zip to restore the XPERIA X10i.
Just go to Your recovery and flash rom (don't forget to wipe Your data) . Else You can just flash whole new rom using flashtool.
Sent from note, a phone like never before
Related
I have a problem when I tried to install a custom ROM.
I backed up my files using XRecovery, and copied the contents of my SD card on the PC first..
I used the XRecovery to wipe the SDcard, system, cache, data, and delvic-cache..
Then, I mounted the SDcard and plugged it in the PC. I put the CustomROM.zip on the card. Now when I'm trying to install the rom thru XRecovery, it won't work.
I tried to reboot my phone, now my phone is stuck in the
"Sony Ericsson" text when I start my phone; and can't even boot to XRecovery!
How can I
Please help me.. I need my phone so badly..
Please........
ken09_uematsu said:
I have a problem when I tried to install a custom ROM.
I backed up my files using XRecovery, and copied the contents of my SD card on the PC first..
I used the XRecovery to wipe the SDcard, system, cache, data, and delvic-cache..
Then, I mounted the SDcard and plugged it in the PC. I put the CustomROM.zip on the card. Now when I'm trying to install the rom thru XRecovery, it won't work.
I tried to reboot my phone, now my phone is stuck in the
"Sony Ericsson" text when I start my phone; and can't even boot to XRecovery!
How can I
Please help me.. I need my phone so badly..
Please........
Click to expand...
Click to collapse
What ROM you have installed?
what requirements are appropriate?
because most of the ROMs are now installed with cwm recovery not xrecovery.
if you can get xrecovery try to restore.
If it can not, must be flashed with SE Update Service or flashtool.
sorry for my bad english
I was trying to install Cyanogen MINI pro (MiniCM7_Pro_V16)...
I tried to flash the BIOS using the SE updater service, it says, it could not identify the phone (maybe because, I wiped everything out..)
I think you have to use SEUS, its not pc companion.
Try this http://www.giveawayoftheday.com/soft/961758/
not sure if it will work but just try, just click Download Update Service Pro 2.9 once on site. It might read your phone.
or do you have a flash tool?
just tried this but have to wait for Sony to validate my account.
im now trying this site http://sony-ericsson-update-service.en.uptodown.com/
this one will update your phone when turned of so should work.
I already tried that.. It keeps on displaying the error message:
"Could not identify the device. Please Try again."
try this, its got 2.1 firmwares as well and a flash tool.
http://forum.xda-developers.com/showthread.php?t=826455
Hi all i cant get the flashing to work..
im following the [ROOT][FTF][locked/unlocked]Neo/Neo V Official 4.0.4 ICS 4.1.B.0.431; 4.1.B.0.587. thread
and tried Rosh547467 example
1- ICS 4.0.4(4.1.B.0.587)
2. Still locked bootloader. (my phone is unlocked as what i can see with SE bootloader)
3. Flashed 4.1.A.0.562 kernel using Flash tool. (flashtool wont work, its just stuck in "1- unplug the device window" when i try to flash. so i tried SE Bootloader_Unlocking_Relocking and actually did flash 4.1.A.0.562. BUT choose the version with only the kernel and loader. So now the phone dosent have a rom to work correctly.)
4. Done rooting with the help of DooMLoRD's script. (then tried to use this. just keep geting adb drivers to old or waiting for device.)
these bellow i havent tried becouse im stuck.. :crying: I really need help badly..
5. Flashed back 4.1.B.0.587 kernel using Flashtool.
6. Root success. .Tested with rootcheck apps from google play store.
7. Installed CWM from x-part app downloaded from google play store.
8. Installed Titanium backup app and took back of whole app+data.
9. Downloaded custom ROM Xperia ultimate HD 3.0.2 and installed using cwm reboot recovery.
10. Reinstalled my old applications from google play store and restored data from Titanium backup.
Flashing ftf doesnt require root or unlocked BL. you just need correct drivers and latest flashtool.
But if you have unlocked BL, then via fastboot flash any custom kernel which have CWM preinstalled. then flash SuperUser.zip via CWM. you'll be rooted.
i did get this to flash [boof KERNEL] WITH CWM AND ROOT FOR MT11i BASED ON 4.0.2.A.0.62 FIRMWARE
and installed superuser via cwm
and put the zelly cream 2.5.2 rom in.
but when the phone start up, I just get the sony logo. Then it stops
then i found that zelly cream wants suave-kernel. but now im stuck on no wi-fi..
AW: big problem with flashing
Bjorn_D said:
i did get this to flash [boof KERNEL] WITH CWM AND ROOT FOR MT11i BASED ON 4.0.2.A.0.62 FIRMWARE
and installed superuser via cwm
and put the zelly cream 2.5.2 rom in.
but when the phone start up, I just get the sony logo. Then it stops
then i found that zelly cream wants suave-kernel. but now im stuck on no wi-fi..
Click to expand...
Click to collapse
Try to reboot your phone. Also look if suave requires extra WiFi modules to work. Mostly they can be flashed with cwm.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Nop sorry dint help. got suave-kernel-v6 on it now but i cant find any wifi modules..
At last it sorted. In my quest do make the rooting and flashing work i did over look one thing.
You need to
4. Wipe data/factory reset.
5. Wipe cache partition.
6. Wipe dalvic cache under advanced menu.
7. Wipe battery stats under advanced menu.
8. Format data under mount and storage menu.
9. Format system under mount and storage menu.
10. Format cache under mount and storage menu.
before you install the Rom :silly:
But now my wife wont kill me, becouse i played with her phone :victory:
I rooted my Sony Xperia Sola. After that, I installed Font Installer. I restarted the phone, but now it just displays SONY .. Xperia.
How do I fix this?
Mosiqr said:
I rooted my Sony Xperia Sola. After that, I installed Font Installer. I restarted the phone, but now it just displays SONY .. Xperia.
How do I fix this?
Click to expand...
Click to collapse
Seems like your phone is bricked and stucked at bootloop
Can you still access CWM ? If you can , just reflash the rom , maybe it will help .
Try this if all else fail http://www.youtube.com/watch?v=Vd8LxBwpYmg .
just flash back the stock ftf or if you have a unlocked boatlader flash a custom kernel and rom that runs on that kernel
Got stuck on Sony logo
Hi
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
saeedirfaan said:
Hi
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
Click to expand...
Click to collapse
There must be a back option at the bottom of every menu, and the back button may work too.
Re-flash stock rom.
And please don't spam.
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh:
HI Friends, my z ultra stuck with sony logo.
i've tried to install custom rom. i did wiped sustem,accidently.
my phone was unlocked bootloader, rooted and installed dual recovery.
PLEASE HELP ME.
ARUNNREVA said:
HI Friends, my z ultra stuck with sony logo.
i've tried to install custom rom. i did wiped sustem,accidently.
my phone was unlocked bootloader, rooted and installed dual recovery.
PLEASE HELP ME.
Click to expand...
Click to collapse
You wiped system so yes of course you are stuck on the sony logo. You need to flash a rom to have a system to boot to.
Download any rom and boot to recovery and plug-in your usb cable to mount mtp storage and push the .zip file. Remove the cable and flash the rom.
Example of rom
http://forum.xda-developers.com/xperia-z-ultra/development/rom-c6833-hybrid-rom-t3157992
http://forum.xda-developers.com/xpe...m-xperia-z-ultra-pre-rooted-firmware-t3149504
or flash an .ftf stock rom if you want full stock rom
Yeah just flashtool ftf it happens to me.
thank you super user. i'll try to flash.
my phone won't boot recovery mode. how to boot recovery?
thanks lot.