Hi guys, im total noob unfortunately and i have wiped system in stock rom :crying:
I have non EFIGS xt910 so my stock was 4.04
I would appreciate any help in bringing my stock rom back (or stock 4.1.2) but i need tutorial or somethin because i have no idea what to do
I think recover RSD Lite if there is Fastboot mode.
http://theunlockr.com/2012/01/24/how-to-restore-the-motorola-droid-razr-using-fastboot-files/
This guide is all inclusive, and will restore you back to absolute stock.
Sent from my XT912 using xda app-developers app
Related
I need a Stock ics rom that can be flashed without problems im on ics eclipse rom and i need a link please
Moved to correct sub forum.
Sent from my XT910 using xda premium
the Razr Utility at DroidRzr can get you back to stock 6.16.211
http://www.droidrzr.com/index.php/t...-181-windows-for-verizon-droid-razrmaxx-only/
Hey guys I recently tried to install Android Revolution rom and I super wiped the phone but did not put the Android Revolution Rom on a separate partition and lost everything on my phone. I read online that I need to flash a rom through ODIN but I do not know how to nor if all roms can be flashed through ODIN. Can anybody help please?
Thanks
Zubin
Visit sammobile.com, download the firmware for your phone and flash it with Odin
Sent from my GT-I9300 using xda app-developers app
Odin
In my experience, you can flash any Rom using Odin. And on how to do this, Google is your friend.
I currently use My flashed droid razr with stock ROM 2.3.6, GB. it is flashed to cricket. my first question is, when i use my safe ROM, will i still be on cricket? and my second question is, by wiping data/factory reset, will this delete the files i have on my internal or external memory for my unsafe/stock ROM? please answer back asap! Thanks!
xXVestiXx said:
I currently use My flashed droid razr with stock ROM 2.3.6, GB. it is flashed to cricket. my first question is, when i use my safe ROM, will i still be on cricket? and my second question is, by wiping data/factory reset, will this delete the files i have on my internal or external memory for my unsafe/stock ROM? please answer back asap! Thanks!
Click to expand...
Click to collapse
Factory reset/Data Wipe will clean ur internal storage. Thats all.
It does nothing against ur SDCARD
I went ahead with it. And it didnt touch anything on my unsafe ROM. but on my new safe ROM I dont have 3g. What could be the problem? I still have it for my unsafe ROM.
Sent from my DROID RAZR using xda app-developers app
Try to manually add apns
Sent from my MOTOROLA RAZR using xda app-developers app
xXVestiXx said:
I went ahead with it. And it didnt touch anything on my unsafe ROM. but on my new safe ROM I dont have 3g. What could be the problem? I still have it for my unsafe ROM.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Did you install a rom that is for something other then gingerbread 2.3? If installed a rom for ICS or JB then you will not have correct radios
blackops11252 said:
Did you install a rom that is for something other then gingerbread 2.3? If installed a rom for ICS or JB then you will not have correct radios
Click to expand...
Click to collapse
I tried to install ics at first. But it wouldnt even boot. but the one I am using is a GB ROM. and when I switch back to original system in safestrap, 3g is just fine...
Sent from my DROID RAZR using xda app-developers app
I rooted my phone on the Christmas leak and I wanted to unroot to update to the newest version but the update fails so I want to just use RSD lite to flash the latest version (98.72.16) I am on 98.72.8 will it brick my phone?? And if it won't brick it then do I just use the .sbf file from the sbf.droid-developers website please help I am a noob but I really want to learn!
Big_Red77 said:
I rooted my phone on the Christmas leak and I wanted to unroot to update to the newest version but the update fails so I want to just use RSD lite to flash the latest version (98.72.16) I am on 98.72.8 will it brick my phone?? And if it won't brick it then do I just use the .sbf file from the sbf.droid-developers website please help I am a noob but I really want to learn!
Click to expand...
Click to collapse
you can just rsd lite it, it will not brick
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
you can just rsd lite it, it will not brick
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OK thanks I'll try it....and it will return me completely back to stock right out of the box as if I've never rooted??
Big_Red77 said:
OK thanks I'll try it....and it will return me completely back to stock right out of the box as if I've never rooted??
Click to expand...
Click to collapse
No, your apps, accounts & contacts will be saved, unless if you factory reset in the stock recovery. You will be unrooted
Sent from my GT-I9300 using xda app-developers app
Sorry I'm on the website on my phone and didn't see the last part....thanks for all your help!!
I have one last question......when I go into the boot loader menu do I choose ap fastboot or sbf flash. And by the way should the file be a .sbf file or a different file extension??
Sent from my DROID RAZR using xda app-developers app
Similar Question
I bought a used Droid RAZR and it constantly reboots. It was running stock 4.1.2 and Factory resting, booting into Safe Boot, formatting the Internal SD memory, or all 3 wouldn't stop it so I Rooted it with razr blade for Jelly Bean and then flashed the lastest nightly of CM 10.1. It never gets service so I was to flash it back to stock ICS with RSD lite or back to Jelly Bean with the sbf. Before I do this can anyone tell me if I run the risk of bricking it flashing either of the sbf's? Thanks in advance!
anti_gravity99 said:
I bought a used Droid RAZR and it constantly reboots. It was running stock 4.1.2 and Factory resting, booting into Safe Boot, formatting the Internal SD memory, or all 3 wouldn't stop it so I Rooted it with razr blade for Jelly Bean and then flashed the lastest nightly of CM 10.1. It never gets service so I was to flash it back to stock ICS with RSD lite or back to Jelly Bean with the sbf. Before I do this can anyone tell me if I run the risk of bricking it flashing either of the sbf's? Thanks in advance!
Click to expand...
Click to collapse
I had the same problem (obviously) but TheMrCool212 helped me (don't forget to push his thanks button!!) And I flashed the file from WWW.sbf.droid-developers.org using RSD lite it took 10-20 mins. Just remember to use the right file for which variant of the RAZR you have. I don't think the file was a .sbf file but it WILL work. P.S. I would not recommend going back down to 4.0.4 because they switched kernels between 4.0.4 and 4.1.2 and I heard it wouldn't work so I just used the 4.1.2 file. But if your dead set on going back to 4.0.4 ask around some more before flashing. Hope this helped if you are confused or need more help just ask me.
Sent from my DROID RAZR using xda app-developers app
Hi team
Thanks for the wonderful Stock ROM in the development. Section
Im having Moto Razr Maxx (XT910) with Asian Retail ICS 4.0 ROM.
& 3.0.6-g3c83d29 kernal.
I have activated Safe strape. 3.11 with slot0-Stock ICS 4.0
Slot1-Cyanogen mod 10.1 RC05
Slot2- tried Stock EU ROM as instructed. But getting blank screnn after reboot. !!!!
Can you pl. Help me to resolve the issue??
Let me tell you, I have not installed kernel as suggested. In this thread.....
Sent from my XT910 using Tapatalk 2
You must flash the JB kernel because that rom is Jelly Bean and you are still on ICS...
Sent from my Razr XT910
Thanks mate..
So I want to load JB kernel on slot2 right??
I have already downloaded specific JB kernel (ArtMod 14 number. Kernel) but its .image file hence not showing in safe strape'install' menu.
Bro. Can you please give more detail on how to load the same??
Im really fedup with the battery life On CM 10.1....pls. help....
Sent from my XT910 using Tapatalk 2
Pl. Help brothers!!!!
Sent from my XT910 using Tapatalk 2
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
demonshouter said:
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
Anybody. Plsssssssss... help
Sent from my XT910 using Tapatalk 2
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
I'm also using BMM that can flash boot.img directly. But I think you can do this guide: http://forum.xda-developers.com/showthread.php?t=2078021
CAREFULL: use just the kernel flashing part of the guide: fastboot flash boot boot.img
and be sure you flash the correct boot.img that you downloaded. you can download the right kernel from the other artur mode:http://forum.xda-developers.com/showthread.php?t=2260951
one more thing. I never done that after SS was installed. So better wait for others to confirm that it's OK before you actually doing this.
Maybe you can also try this tool to flash kernel: http://forum.xda-developers.com/showthread.php?t=2399385
He says it support any fastboot device.
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
hi all! i have some minor issues with the rom and i hope you can help me...
1. the phone (razr maxx) didnt charge while powered off
2. i cant seem to install the smart actions i so love!
does anyone have any idea to fix those?
sun1983 said:
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
sun1983 said:
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You don't have to erase your Cid if you are from Europe,otherwise yes.
And if this is your first time that you want to install some rom on System 2,you must activate the partition.
Here http://forum.xda-developers.com/showthread.php?t=2325764 are some video tutorials how to use BMM.
Sent from my Razr XT910