hello i have LG L9 (LGP768G) its death,when i plug it with usb cable in my laptop with windows 7, it detect the cellphone but suddenly cut off, and later it detect it again and cut off again and repeat repeat over and over,it doesnt turn on, no leds, no lights, no display, nothing, what can i do??i can stop it just for a minute and it detect and says lg usb modem, after a few minutes it cut off again,i can do that with a program, fastboot, i chose the option number 4, i plug the cellphone without battery holding volume up, the process starts and i put the battery back and thats its the moment when the computer detect it in lg usb modem but the cellphone never turn on, nothing, just that, please help
please somebody help me please
kira99 said:
please somebody help me please
Click to expand...
Click to collapse
Please give more information.
- Your latest installed firmware
- What you did before it cannot turn on.
- From your post, your phone can turn on to S/W update mode, right?
- Did your battery fully charge?
artit said:
Please give more information.
- Your latest installed firmware
- What you did before it cannot turn on.
- From your post, your phone can turn on to S/W update mode, right?
- Did your battery fully charge?
Click to expand...
Click to collapse
hello thanks for your time, well i try to update and my battery run out,i dont remember the android version neither the firmware, the L9 p768g its telcel, the only way its pluging with the usb cable to my laptop, holding volume up and without battery,and runningg a software called fastboot,thats the only way, and later the software original LG support says an update its avaible, but i cant finish the process because the cellphone cut off the conection after a few minutes, i dont know what to do my battery its fully charged
kira99 said:
hello thanks for your time, well i try to update and my battery run out,i dont remember the android version neither the firmware, the L9 p768g its telcel, the only way its pluging with the usb cable to my laptop, holding volume up and without battery,and runningg a software called fastboot,thats the only way, and later the software original LG support says an update its avaible, but i cant finish the process because the cellphone cut off the conection after a few minutes, i dont know what to do my battery its fully charged
Click to expand...
Click to collapse
Try a different USB cable.
Ilxaot said:
Try a different USB cable.
Click to expand...
Click to collapse
hello thanks for your answer, i already did that i have 3 different usb cables
kira99 said:
hello thanks for your answer, i already did that i have 3 different usb cables
Click to expand...
Click to collapse
i had the same problem, i tried EVERYTHING
after two days, i sent it to the shop where i got it from, they fixed it
don't lose more time, just let them do it
U Need To rest your mobile
When you can try root that is very fault for our mobile if we rooted our mobile then we face very huge prob you can go market or mobile special and just request please reset my mobile now (inshallah)Your mobile will ok
---------- Post added at 12:12 PM ---------- Previous post was at 12:06 PM ----------
You know about LG Optimus L9 P768 its internal memory is to low so i can't installed HD game in this mobile I want to install In external how i can do this please help me
Thanks
Also send me sloution in tis EMAIL_ID : ([email protected])
Regard : Naveel Haroon
kira99 said:
please somebody help me please
Click to expand...
Click to collapse
How did your phone mess up? If you didn't do any thing to it and it just turned off for no reason, you have a hardware failure. We can't help you if that's the case.
Sent from my LGMS769 using XDA Premium 4 mobile app
Related
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
So seus doesnt see your phone in flash mode?
Now your in some **** man.. :/
My phone is getting no juice like its hard bricked but its charge but no led during charging and doesn't turn on
the inspired 4g
hold power button, back button and connect it to pc nd try to flash with seus. see that all the drivers are installed.
ive tried power button thing but still nothing when i plug it i get no led no screen light up but here is a few pictures i even watch the video read the post for flash tool but i cant it to power on at all
is led working??
siddardha21 said:
is led working??
Click to expand...
Click to collapse
No led doesn't turn on I just bought the phone last week
the inspired 4g
it might sound foolish, but if u r still goin thro the same problem, try to flash stock rom using flashtool.
jst dnt connect ur phone..bt start flashtool n start flashing..it will ask u to remove device,hold back button n insert it again..
try doing it,bcz once i was goin thro same problem n it worked for me!!
nowseewhatudid said:
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
Click to expand...
Click to collapse
Hey i have this same problem, i used SE_tweaker tool v4.0, and followed ALL THE INSTRUCTIONS, the program was unlocked suscefully the bootloader, but i turned off and, btw, dont load NOTHING. THE FLASH LED DONT TURNS ON WHILE CHARGING OR CONNECTING TO THE PC, Please, give me an answer, really, i donthave money to buy a phone or send to maintenance, and the Sony Ericsson guarantee has avoid. I am cryiing, REAALLYY!!
PLEEEEEEEEEEAAASEE!!!
X10 mini pro
Can the device enters flash mode ? If yes, try to flash stock kernel using flashtool, or using SEUS...
If it can't enter flash mode, I'm sorry, the I/0 maybe ruined....
Sent from my U20i using XDA
Please.. HEEELLLLPPP!!!
StardustGeass said:
Can the device enters flash mode ? If yes, try to flash stock kernel using flashtool, or using SEUS...
If it can't enter flash mode, I'm sorry, the I/0 maybe ruined....
Sent from my U20i using XDA
Click to expand...
Click to collapse
And... if not........ ???? I tried the flashmode, (i enter quickly in this because i have the combination, anytime i try, everytime green led) but the green led doesn´t turn on not responses, nothing works, my cellphone is a beautiful lego bricked phone.
Any other way? adb, circuit shock, other????
D,: D,: D,:
Pleeeaseee!!!!
Same situation... I heard that
Serial Cable + Setool2 is the only way, but requires activated dongle...
If I succed I'll post about it.
skirhir said:
Same situation... I heard that
Serial Cable + Setool2 is the only way, but requires activated dongle...
If I succed I'll post about it.
Click to expand...
Click to collapse
But is possible... =D =D =D, i dont want to loose my phone, if is possible i search for money and send to the technician to repair the phone =D
sorry for my bad english, and thanks fot help
---------- Post added at 10:22 AM ---------- Previous post was at 09:51 AM ----------
Darcond said:
But is possible... =D =D =D, i dont want to loose my phone, if is possible i search for money and send to the technician to repair the phone =D
sorry for my bad english, and thanks fot help
Click to expand...
Click to collapse
How i do the serial cable? P_P and how to flash the bootloader? anyone knows? =D, im very thankful to give me attention, sorry for the noober questions
Listen tu me...
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
SeeZaar said:
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
Click to expand...
Click to collapse
=D a loop, but thanks for helping
could be the battery. removing it for a couple of seconds or a minute if you like. do some initial charging like 5 to 10 mins or so then try it again. ive seen a couple of post that it worked that way.
demoniacs said:
could be the battery. removing it for a couple of seconds or a minute if you like. do some initial charging like 5 to 10 mins or so then try it again. ive seen a couple of post that it worked that way.
Click to expand...
Click to collapse
no burn risk?
Try this...
nowseewhatudid said:
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
kiki6639 said:
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
Click to expand...
Click to collapse
Hey one problem, THE PHONE DOESN´T TURN ON, THE FLASH LED DONT WORKS,
HM.... i listened about riff, any way to flash without the box?
Pleeaseee, if you want to help, please, read all the posted before comment, but, , thanks
Darcond said:
Hey one problem, THE PHONE DOESN´T TURN ON, THE FLASH LED DONT WORKS,
HM.... i listened about riff, any way to flash without the box?
Pleeaseee, if you want to help, please, read all the posted before comment, but, , thanks
Click to expand...
Click to collapse
Sorry, i have lazy eyes.
Try this:
calangoni said:
I had the same problem. I tried some key combinations like "Power + Back" or "Power + Menu" and it didn't work, but when I tried "Power + Home" the phone came back alive!
Click to expand...
Click to collapse
kkkhattak said:
with speaker there is cover remove it and there is a place.place the needle in it for 1minute and then reply me
Click to expand...
Click to collapse
Its from thread : [Q] Sony Ericsson Xperia x10 mini pro DEAD by gustavo.momente
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
You can try connecting to your PC via Odin and try the unbrick method by some guy named qbking on youtube. Link below
https://www.youtube.com/watch?v=m8tg9AlfOQ8&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
captemo said:
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
Click to expand...
Click to collapse
it was for carrier rom i wanted to return it to stock , and yeah i hooked it to the wall still didnt get any power , but im gonna check out that QBking77's Video , Ill Let you guys know , Thanks
:fingers-crossed:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
rangercaptain said:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
Click to expand...
Click to collapse
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Good For You!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Glad you're not bricked! I was bricked a few months ago, yes the real hard brick paper weight dead no response brick, not what these other post about having bricked their phone. I downloaded and installed a Liquid smooth jelly rom, but the post linked to a s3 build.
As soon as my phone didnt turn I feared the worst. Confirmed and yes it was gone. I had to send it off to get J-tagged. It worked!
Cost me a pretty penny. Then the thread mod was like oops! I linked the wrong rom hope nobody installed and got brick, just fixed it.
Ain't that some ****!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Read up my friend. It is all in the general section Super Everything, The All in one stock thread, and finally here. You are not unrooting insomuch as just flashing stock. Once you flash stock, that overwrites/deletes twrp/cwm and supersu.
Yes, as ^^^^ mentioned, you don't have to be concerned about unrooting.
There are debloated and bloated versions of stock Canadian roms in the development section. Another source for stock/carrier roms is www.samfirmware.com but you have to flash those with a pc using Odin software.
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
chief_wolfinjo said:
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
Click to expand...
Click to collapse
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
mengfei said:
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
chief_wolfinjo said:
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
Click to expand...
Click to collapse
try SP Flash method that needs NO battery
http://techideki.com/how-to-root-jiayu-g3-working-recovery-mode/
http://vondroid.com/threads/cwm-recovery-jiayu-g3.4837/
http://androidunbricked.blogspot.com/2013/06/unbrick-your-mtk6577-android-mobile.html
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
mengfei said:
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
Click to expand...
Click to collapse
thank you
I will try that today when i come home.
otherwise Do you know which test points will power up ?
Hi I have the Jiayu g3s which is the quad core variant. I have my phone too but it boots up and goes until the boot logo where it freezes please help
revive JIAYU G3S(G3T)
I BRICKED MY PHONE USING A ROM NOT PROPER FOR MY DEVICE JIAYU G3S(G3T). AFTER THIS, THE PHONE WON'T CHARGE, WON'T START, IT WAS DEAD. BUT AFTER HOURS SPENT SERCHING ON THE INTERNET, I WAS ALLOWED TO FIND WHAT I NEEDED TO REVIVE MY PHONE: ROM "JY-G3-20130523-102107" UNDER "SP_Flash_Tool_v3.1332.0.187". IN WINXP AFTER INSTALLING DRIVERS, MY DEVICE WAS DETECTABLE WHEN I PLUG IT, WITH NO BATTERY IN "SP_Flash_Tool_v3.1332.0.187" , SCATTER - LOADING PUT/MOUNT THE FILE FROM ROM "JY-G3-20130523-102107" NAMED "MT6589_Android_scatter_emmc" AND HIT "FIRMWARE->UPGRADE" CONNECT THE PHONE TO PC WITH NO BATTERY AND PUSH NOT FOR LONG, POWER BUTTON AND VOLUME MINUS/DOWN. AFTER THAT THE PROCESS OF RESTORE THE SOFT IN THE PHONE IT SHOULD STARTING. THANKS TO ANYONE WHO POSTED THE SOFTWARE NEEDED. FOR A FEW DAYS HERE IS A DOWNLOAD LINK
don't forget to add (point) .html at the end
fastupload.rol.ro/8d37335019a3fa55a5decead42e8b667
there is a official rom on this page:
www.talkingmobi.com/rom-download-2/rom-download-2013-may-2014/
scroll through it there are many roms but it is there.
you can also find the flashing guide and tools to download you need to reply to the posts there to see the links i know it is a odd restriction and also no right clicking is allowed
used that to fix my bricked Jiayu G3T and it worked
good luck
hello,
my Xperia P's Usb port is now working it's charging but couldn't connect to any PC or OTG Media ....
as PC connection not working so i m unable to flash my phone in flashboot mode.
i tried to consult to service center guys they say as my device is rooted they can't help me fix this problem....
i don't want to loose my phone please help me.... every thing in my phone is brand new and original but as i use custom kernel & rom ...so they are not accepting my phone ....
is there any other way i can use to flash my device to stock ... so i can get it fixed .
i can turn on my phone but it shows no sim no wifi ...
please help...
thanking you
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
ChikeD said:
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
Click to expand...
Click to collapse
yes i checked .. flash mode is not working not even fastboot mode ...
yes it's charging ...i tried 4-5 different cables ...i also checked cables with my brother's phone they were working fine...
it started a week before everything was working great i tried to connect my device i thought it would b new rom's problem so it will b fixed... so i try to flash other rom but accidentally i formatted system after wiping data and factory reset ... but that rom hangs as it says unable to mount system...
i try the older rom it flashed but in about phone there's baseband version is unknown, wifi was not turning on and i can't gain root access via terminal emulator or titanium backup or any other root app...
i thought to revert everything back via flashtool but my device couldn't be connected in flash mode... green light goes on n turned to red again and battery start to charge ...
sorry for wrong english ...
but thanks for your interest and reply ...
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
miteshlakhwani said:
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
Click to expand...
Click to collapse
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
i also try to get it diagnosed at local street repair shop as sony service center guys behaved really bad with me ... not even check my device they turn it on instead of sony logo it shows nemesis kernel logo so they say your device is rooted we can't accept it ...
i felt v.bad ...
local street repair guy told me to leave my device with hi for a day or 2 ... but i don't trust them so i couldn't do that...
he told me that port is ok it might b an ic chip which get's fungus or any kind of short circuit is happening there only ...
i m totally confused
thanks for ur reply
ChikeD said:
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
Click to expand...
Click to collapse
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
miteshlakhwani said:
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
Click to expand...
Click to collapse
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
ChikeD said:
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
Click to expand...
Click to collapse
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
miteshlakhwani said:
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
Click to expand...
Click to collapse
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
ChikeD said:
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
Click to expand...
Click to collapse
i also tried that too in CWm too there's no sign of any connection in pc ...
service center guy said that replacing port is not possible so they had to replace complete board ... n that will cost around 80% of cost of device....
but they won't do it as my device is rooted ...
This happened with my S3 just recently and they swore it wasn't the USB connector if it would charge. I called T-Mobile and got upset and told them I plug in an identical S3 and it shows immediately with mine it won't not even in download mode. They swapped it out for me.
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
dara007_168 said:
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
Click to expand...
Click to collapse
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
ChikeD said:
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
Click to expand...
Click to collapse
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
No SD card, and you can relock BL, but not without flashtool.
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
miteshlakhwani said:
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
Click to expand...
Click to collapse
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
dara007_168 said:
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
yes i enquire about replacing board from sony service center they told it will cost approx 80% of cost of mobile ...
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse