Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
chief_wolfinjo said:
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
Click to expand...
Click to collapse
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
mengfei said:
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
chief_wolfinjo said:
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
Click to expand...
Click to collapse
try SP Flash method that needs NO battery
http://techideki.com/how-to-root-jiayu-g3-working-recovery-mode/
http://vondroid.com/threads/cwm-recovery-jiayu-g3.4837/
http://androidunbricked.blogspot.com/2013/06/unbrick-your-mtk6577-android-mobile.html
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
mengfei said:
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
Click to expand...
Click to collapse
thank you
I will try that today when i come home.
otherwise Do you know which test points will power up ?
Hi I have the Jiayu g3s which is the quad core variant. I have my phone too but it boots up and goes until the boot logo where it freezes please help
revive JIAYU G3S(G3T)
I BRICKED MY PHONE USING A ROM NOT PROPER FOR MY DEVICE JIAYU G3S(G3T). AFTER THIS, THE PHONE WON'T CHARGE, WON'T START, IT WAS DEAD. BUT AFTER HOURS SPENT SERCHING ON THE INTERNET, I WAS ALLOWED TO FIND WHAT I NEEDED TO REVIVE MY PHONE: ROM "JY-G3-20130523-102107" UNDER "SP_Flash_Tool_v3.1332.0.187". IN WINXP AFTER INSTALLING DRIVERS, MY DEVICE WAS DETECTABLE WHEN I PLUG IT, WITH NO BATTERY IN "SP_Flash_Tool_v3.1332.0.187" , SCATTER - LOADING PUT/MOUNT THE FILE FROM ROM "JY-G3-20130523-102107" NAMED "MT6589_Android_scatter_emmc" AND HIT "FIRMWARE->UPGRADE" CONNECT THE PHONE TO PC WITH NO BATTERY AND PUSH NOT FOR LONG, POWER BUTTON AND VOLUME MINUS/DOWN. AFTER THAT THE PROCESS OF RESTORE THE SOFT IN THE PHONE IT SHOULD STARTING. THANKS TO ANYONE WHO POSTED THE SOFTWARE NEEDED. FOR A FEW DAYS HERE IS A DOWNLOAD LINK
don't forget to add (point) .html at the end
fastupload.rol.ro/8d37335019a3fa55a5decead42e8b667
there is a official rom on this page:
www.talkingmobi.com/rom-download-2/rom-download-2013-may-2014/
scroll through it there are many roms but it is there.
you can also find the flashing guide and tools to download you need to reply to the posts there to see the links i know it is a odd restriction and also no right clicking is allowed
used that to fix my bricked Jiayu G3T and it worked
good luck
Related
I used SP Flash Tool 3.1224.01 to flash my phone with the wrong pre-loader and now its DEAD. It won't turn on, it won't charge and no PC detection. After searching the web for two days I decided to test out the TP method setting 200 ohm resistance. The PC would detect it and driver is installed for 2 seconds then disappear then connects then disappear. It would do that non-stop. The touchpoint is showing around 100 sometimes it jumps around higher and lower. I also tried the method of taking the touch screen apart and heating it up with a lighter but still doesn't work.
I need factory rom with scatter file and all the require files. I tried many different files from here and none work. I look every where but cannot find correct rom files. Please someone help me. My phone is new and I only want to root it by flashing it with SP flash tool. Now my phone is dead and I didn't back-up nothing so I have nothing. Please help.
My Phone-
Black color Star 6 inch N9776
cpu- MTK6577 dual core 1ghz
android- JB 4.1.1
sim - dual sim
IMEI 1: 359776011389436
IMEI 2: 359776011389444
tuna9 said:
I used SP Flash Tool 3.1224.01 to flash my phone with the wrong pre-loader and now its DEAD. It won't turn on, it won't charge and no PC detection. After searching the web for two days I decided to test out the TP method setting 200 ohm resistance. The PC would detect it and driver is installed for 2 seconds then disappear then connects then disappear. It would do that non-stop. The touchpoint is showing around 100 sometimes it jumps around higher and lower. I also tried the method of taking the touch screen apart and heating it up with a lighter but still doesn't work.
I need factory rom with scatter file and all the require files. I tried many different files from here and none work. I look every where but cannot find correct rom files. Please someone help me. My phone is new and I only want to root it by flashing it with SP flash tool. Now my phone is dead and I didn't back-up nothing so I have nothing. Please help.
My Phone-
Black color Star 6 inch N9776
cpu- MTK6577 dual core 1ghz
android- JB 4.1.1
sim - dual sim
IMEI 1: 359776011389436
IMEI 2: 359776011389444
Click to expand...
Click to collapse
you are not alone man...I was in the same situation as you, but I successfully revived my phone
contact me on skype, we will work together to fix your phone. Also install team viewer in advance.
My skype kachman3
kachmul2004 said:
you are not alone man...I was in the same situation as you, but I successfully revived my phone
contact me on skype, we will work together to fix your phone. Also install team viewer in advance.
My skype kachman3
Click to expand...
Click to collapse
Sorry Sir but I don't know how to use team viewer and some people online say its not safe to use team viewer so I will take their advise and not use that program. If you can help me here by posting what you know I would very much appreciated.
All the information I provided are the only information I can get from my phone cause my phone is DEAD. I can only link via TP but keep bouncing off and on. I can only keep it steady via SP flash tool. I'm thinking I need correct factory rom because all those rom that I found in this forum will not go pass the red bar and I keep getting error pop up saying I'm missing certain files.
Please sir if you can help me with your factory rom plus all the require files plus scatter file if i need it I will love to donate some money to you via paypal account. I would donate some money via paypal if anybody can help me.
Dont have a lot of time on the forum. Try connecting your phone while holding the volume down button and see if u get anything.
Sent from my V1277 using xda premium
kachmul2004 said:
Dont have a lot of time on the forum. Try connecting your phone while holding the volume down button and see if u get anything.
Sent from my V1277 using xda premium
Click to expand...
Click to collapse
it don't work sir. I connect via TP method. The PC detect it while I'm holding volume button down and nothing. I also tried holding volume button down + power, volume up and volume up+ power and nothing. I tried with the battery on but nothing. I've tried many button methods and nothing works.
tuna9 said:
it don't work sir. I connect via TP method. The PC detect it while I'm holding volume button down and nothing. I also tried holding volume button down + power, volume up and volume up+ power and nothing. I tried with the battery on but nothing. I've tried many button methods and nothing works.
Click to expand...
Click to collapse
I cannot do anything more If I cant see...sorry
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed
Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................
Well, it's simple.
I've been scammed for the first time on eBay.. I bought a phone I thought was a good piece of ****, But when it arrived.. I found an SC6820-based single core 1.0 GHZ phone, with 212MB RAM, GPRS quad band network (****ing 1G..), and a fake Android 4.2.2 ROM based on MocorDroid 2.3.5. Not to mention it took me ages to successfully root it to delete useless system apps..
The phone is a chinese - " BML ONEmini 4" ", Model " E19 ".
Model:E19
Battery:26%
Firmware version:4.2.2
Status:ROOTED
Resolution:480*800
Manufacturer:Unknown
Serial:*****************
IMEI: *****************
IMSI:*****************
MAC:*****************
Android Version:4.2.2
Baseband version: DM_BASE_12A_W13.10|sc6820_modem|03-06-2013 19:20:35
Kernel version:sprdroid_base-user 4.2.2 MocorDroid2.3.5_Trout gc925_1.03_jhm_e19_v06 test-keys
Click to expand...
Click to collapse
Anyway, the problem is simple.
When I turn on WIFI, it finds networks around the area, But when I try to connect into one of them, Just NOTHING happens.. As if I never pressed "Connect". Same happens with my home WIFI, 1cm close to my router.
And the Bluetooth... Well, when I turn it on and start scanning for devices, It just won't find any of my Bluetooth devices... And it's set to be visible.
... And yeah, trust me, I know how to work with my Bluetooth devices.. They're flawless, and were waiting for an answer like good boys... But nothing happens, It doesn't find any devices.
That's pretty much all guys... I hope you can help me somehow, Is there a way to fix the WIFI and Bluetooth here..? So I can at least do something with this piece of ****, lame excuse of a phone..?
It's probably a problem with the ROM, huh..? But still, what do I do...
Thank you.
Well..?
Hi
I have the same phone, that I bought it few days ago. but with a little difference. I bought it as broken phone, the phone was dead and when I tried to turn it on, it was just vibrating. anyway I searched the web and found a proper working rom for it use this rom and write it to your phone. I hope this rom fix your problem .
this is the link for rom: http://www.needrom.com/mobile/bml-one-mini-sc6820/
if you needed any help to update firmware just tell me.
good luck
flashing Spreadtrum phone
samsonmagu74 said:
Hi, I just read your post on your success on flashing a BML One Mini. I am having trouble flashing it with the Research Download tool it just wont work. How did you get it to work? Thanks in advance.
Click to expand...
Click to collapse
Somebody asked me how to flash an Spreadtrum phone with Research Download tool. I am answering him/her here so some one else may find this useful. and sorry for my bad english in advanced
here are the steps.
1. charge battery at least 50%
2. download Spreadtrum Drivers and install them ( I have downloaded them while ago and now I cant give you exact link, so please google it)
3. take out the battery of your phone, then connect it with usb cable to pc, then while pushing the "vol down" key insert back the battery.(here unknown device will pop out and will install the driver.
4. then you can see that there is a com port added in device manager.
5. take the battery out again
6. now open Research Download tool and then click "load packet" button(first one on the left) and point to your downloaded pac file
7. now press "start downloading" button
8. again while pushing the "vol down" key insert back the battery.
9. download process starts, and if the pac file is right for your phone it will complete and you will see "passed" in the Research Download
that is all, have fun :highfive:
rayle20 said:
Somebody asked me how to flash an Spreadtrum phone with Research Download tool. I am answering him/her here so some one else may find this useful. and sorry for my bad english in advanced
here are the steps.
1. charge battery at least 50%
2. download Spreadtrum Drivers and install them ( I have downloaded them while ago and now I cant give you exact link, so please google it)
3. take out the battery of your phone, then connect it with usb cable to pc, then while pushing the "vol down" key insert back the battery.(here unknown device will pop out and will install the driver.
4. then you can see that there is a com port added in device manager.
5. take the battery out again
6. now open Research Download tool and then click "load packet" button(first one on the left) and point to your downloaded pac file
7. now press "start downloading" button
8. again while pushing the "vol down" key insert back the battery.
9. download process starts, and if the pac file is right for your phone it will complete and you will see "passed" in the Research Download
that is all, have fun :highfive:
Click to expand...
Click to collapse
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
samsonmagu74 said:
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
Click to expand...
Click to collapse
No problem dear friend, I am glad that I could help you.:good:
htc j one mini china
samsonmagu74 said:
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
Click to expand...
Click to collapse
i follow all rules but the phone screen is white after i flash it
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse