[Q] random reboots with any CM10 - Atrix 4G Q&A, Help & Troubleshooting

Hi @ all.
I`m flashing a lot of roms and testing every rom from this page.
But any CM 10 rom doesn`t work.
Everytime i get random reboots. Sometimes i get bootloop, somtimes the phone boots normaly but reboots at installation of GM Account.
Sometimes it runs 1-2 Minutes.
There is no way to fix this problem by myselfe.
Any other rom like GB, cm7 works great.
I make full wipe before flashing. I tested wiping after flashing and so on... NO WAY.
Someone has any Tip for me how to get to run?
THX for you posts. Greetings
(I come from Germany so its a German Atrix i think!?)

Scootsch said:
Hi @ all.
I`m flashing a lot of roms and testing every rom from this page.
But any CM 10 rom doesn`t work.
Everytime i get random reboots. Sometimes i get bootloop, somtimes the phone boots normaly but reboots at installation of GM Account.
Sometimes it runs 1-2 Minutes.
There is no way to fix this problem by myselfe.
Any other rom like GB, cm7 works great.
I make full wipe before flashing. I tested wiping after flashing and so on... NO WAY.
Someone has any Tip for me how to get to run?
THX for you posts. Greetings
(I come from Germany so its a German Atrix i think!?)
Click to expand...
Click to collapse
Which kernel are you using? Are you wiping everything down and installing the right way?
Sent from my MB860 using xda app-developers app

palmbeach05 said:
Which kernel are you using? Are you wiping everything down and installing the right way?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think i do all right. I´m useing TeamWin Recovery 2.6 and wipe Dalvik, Cache and Data (Factory reset)
I`ve tested to wipe Dalvik, Cache, Data and System too.
I wanted to flash Mokee Open Souce or Epinters 10.1. They have the 3.1.10 Kernel right now.
In other Roms i take the Faux Kernels (GB or CM7) without any Problems.

Scootsch said:
I think i do all right. I´m useing TeamWin Recovery 2.6 and wipe Dalvik, Cache and Data (Factory reset)
I`ve tested to wipe Dalvik, Cache, Data and System too.
I wanted to flash Mokee Open Souce or Epinters 10.1. They have the 3.1.10 Kernel right now.
In other Roms i take the Faux Kernels (GB or CM7) without any Problems.
Click to expand...
Click to collapse
Wipe system, data, cache, osh, dalvik cache.
You said you wanted to use CM10. CM10 is not the same as CM10.1, which is what you just identified in your last post.
You may need to change the recovery you're using. Some ppl see issues with that.
Sent from my MB860 using xda app-developers app

I have change my recovery and wiped osh too.
And it works for two houres. But my whatsapp can' t verify my number.
so i made a reboot and after that the problem is back again.
(Mokee open source)
Will test epinters 4.2 and report here.
But thanks for your help!!!

Scootsch said:
I have change my recovery and wiped osh too.
And it works for two houres. But my whatsapp can' t verify my number.
so i made a reboot and after that the problem is back again.
(Mokee open source)
Will test epinters 4.2 and report here.
But thanks for your help!!!
Click to expand...
Click to collapse
what rom and kernel were you using?
Sent from my MB860 using xda app-developers app

It is the MK 42.2 RC5 with the 3.1.10 Kernel. May be the kernel isn't the original or tweaked. I don't know.

Scootsch said:
It is the MK 42.2 RC5 with the 3.1.10 Kernel. May be the kernel isn't the original or tweaked. I don't know.
Click to expand...
Click to collapse
its original. Thats not the 1.2GHz kernel. It could be a kernel/rom issue. It does happen. Vine or viber had an issue a bit ago with the kernel/rom configuration. Could be whats happening with you.
Sent from my MB860 using xda app-developers app

**** happens. Life goes on
I will try it again or try another rom.
The tip with the osh wipe helped me very much!
Thx & greetings

don't know why but there is no chance to install any 4.x rom.
Have tested smart light 10.1 and epinters 10.1.
Installation works and the system runs for a wile.
But after some time it reboots and gets bootloop.
Maybe the 3.1.10 kernel isn't compatible with my device!?
I'll test the 4.1.2 from epinter and the cm9 from kystianp.

the CM9 with the 3.1.10 Kernel runs since 5 hours perfekt. No reboots or something else!
The Epinter CM 10 i've tested a little bit works too, but it has old kernel bevore 3.1.10.

Since anything beyond 4.0 is based off epinter's work, they all share the same bugs.. if epinter's rebooting, all of them.will do
Enviado desde mi MB860

i think i'll use GB roms for the next time. They are stable and all i need is working.
Maybe there will come new 4.x Roms that will run on my device like a GB rom.
Thank you all for your posts and have fun by XDA Dev. It's the Best Smartphone Forum ever!
Greetings, SCOOTSCH

Remove SD card and try.

Feche said:
Remove SD card and try.
Click to expand...
Click to collapse
Will test this, thanks

Related

[Q] Task's AOKP + Siyah v3

I am running Task's AOKP and when I flash Siyah Kernel v3.0.1 the data usage monitoring stops functioning properly. It works fine with the CM9 kernel that is built into the ROM.
Has anyone experienced this issue with Siyah v3 on AOKP or other ROMs?
Thanks =]
Mines working fine by the looks of it,, possibly reflash?
i've been running this combo for a while now and haven't had any such issues.
Thanks for the input. I have tried reflashing the ROM and kernel each a couple times. Might be motivated to try again later.
I might just have to wait a little while for an updated Siyah or Fenny's kernel.
Sent from my SGH-I777 using XDA App
having the same issue. I cannot set the cycle and the limit anymore.
JazzyCarr0t said:
having the same issue. I cannot set the cycle and the limit anymore.
Click to expand...
Click to collapse
Yes, this is the same problem. That, and it doesn't count any data usage.
camp. said:
Yes, this is the same problem. That, and it doesn't count any data usage.
Click to expand...
Click to collapse
You do a full wipe and flash? And on newest? Mine looks to be working fine. Never really use it, but I see it's populated with data so I assume it's working.
Use the kernel cleaning script, wipe cache and dalvik cache, and reflash siyah. Should fix it.
Sent from my SGH-I777 using xda premium

Lagging Samsung S3

I have a UK Samsung S3 andn ever since i updated to the jelly bean provided by samsung my phones been lagigng like when i open my messages it takes sometimes 5 seconds to open up when it didnt before and even opening things on my phone its lagging
i now have a custom rom which is android revolution HD 15.1 android version 4.1.1 kernel 3.0.31-411425
Any advice?
Thanks
Same here.. Don't get why..
very strange because it was fine before i updated to jelly bean and after that thats when it started lagging and i have the same apps on as i had before
Ditto.. In fact I deleted some!
Yup same here. It's just Jelly Bean mate. In my opinion ICS was much faster and more responsive.
Sent from my GT-I9300 using xda app-developers app
Obagleyfreer said:
Yup same here. It's just Jelly Bean mate. In my opinion ICS was much faster and more responsive.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Have you tried changing the kernel? Maybe try the Perseus Kernel? Lagging might be kernel related.. Or can try to superwipe everything, then flash the ROM again..
I have used ARHD 15 and now on ARHD 16, everything fine & smooth.. of course I did superwipe if changing to new base.
Hope this help..
Holywolf said:
Have you tried changing the kernel? Maybe try the Perseus Kernel? Lagging might be kernel related.. Or can try to superwipe everything, then flash the ROM again..
I have used ARHD 15 and now on ARHD 16, everything fine & smooth.. of course I did superwipe if changing to new base.
Hope this help..
Click to expand...
Click to collapse
It's nothing to do with kernel. It's because the messages application is getting unloaded and loading it up takes more time in JB. I think there are mods that will make it so messages application will persist in memory, so it will be opened like instantly. Have to search forums here in XDA to find it... Same for contacts and phone apps.
same
Same here. I think the problem is the Jelly Bean version made by Samsung. With 4.1.2 is the same. Dialer, contacts and messages take 2-3 seconds to load
The same thing on my dialer and messages..slower compared to ICS
wipe wipe wipe wipe wipe wipe wipe
GR0S said:
wipe wipe wipe wipe wipe wipe wipe
Click to expand...
Click to collapse
wipe before install and wipe a few times after install..still the same..
Didn't try any other JB releases, just the latest leak (ELK4 i think). Did an upgrade without even wiping directly from ICS. My phone is BY FAR more responsive and faster. Wasn't expecting it either, specially without wiping. But it did. So, not sure what you're using for a rom, but if you haven't give this one a try. Haven't done any further modding, it's all "stock", including kernel. Am using exDial though - all the stock's funcions, double the speed.
The only thing that lags is swype but only when i change languages. But since this is a leak test version running swype which is, in itself, a beta app, i'm not complaining. Everything else is just awesome, even in multiwindow.
Your solution buddy
buffblueyes said:
I have a UK Samsung S3 andn ever since i updated to the jelly bean provided by samsung my phones been lagigng like when i open my messages it takes sometimes 5 seconds to open up when it didnt before and even opening things on my phone its lagging
i now have a custom rom which is android revolution HD 15.1 android version 4.1.1 kernel 3.0.31-411425
Any advice?
Thanks
Click to expand...
Click to collapse
try reseting your settings and if you can factory reset that would be even better but reseting your setting won't damage your data but your wifi profiles will be wiped so as your Bluetooth paired devices...lets say you just have to reconfigure you're device's settings. click thanks if I helped

HELP! Wifi problem Custom ROM

So today i flashed different kernels, AOKP Roms and CM10.1 ROM, and They all couldnt connect to my wifi. I had the autification error or something like that. PLEASE HELP. Its definitly not my wifi itself.
Greetings
Had the samething. Maybe dis will help you
http://forum.xda-developers.com/showthread.php?t=2296419
My is on his way 2 samsung.
Did you wipe between the rom flashes?
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Did you wipe between the rom flashes?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Wiped data, cache, dalvik, batteriy stats......even fixed permissions.... It's very weird cuz its only on a Custom ROM..... On stock wifi is working fine....
Perhaps a kernel related problem?
Did you do a full wipe?
Okay here's exactly what i did....
-I was running Samsungs 4.2.2 leak.
-Wiped data and cache and dalvik and battery stats.
-I installed AOKP.
- I installed GAPPS 4.2.2
- Came in the setup screen and said the wifi problem....
then I did the same with CM.....
pottemans said:
Okay here's exactly what i did....
-I was running Samsungs 4.2.2 leak.
-Wiped data and cache and dalvik and battery stats.
-I installed AOKP.
- I installed GAPPS 4.2.2
- Came in the setup screen and said the wifi problem....
then I did the same with CM.....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2245408
If its just with AOKP aosp cm10 then this should help
neilster2020 said:
http://forum.xda-developers.com/showthread.php?t=2245408
If its just with AOKP aosp cm10 then this should help
Click to expand...
Click to collapse
Well, thank you??????
Know I can't even turn on WIFI!!!!! I Can't switch the toggle...... what now??
pottemans said:
Well, thank you??????
Know I can't even turn on WIFI!!!!! I Can't switch the toggle...... what now??
Click to expand...
Click to collapse
Use folder from newer semi ROM this folder is flashed each time you flash a ROM so you can always flash back to the one that was working before
http://forum.xda-developers.com/showthread.php?p=40737157#post40737157
read second to last post

[Q] over heating after rom flashed

I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks

New cynogenmod togari builds.....

hey guys cynogenmod is almost perfectly working for our own togari.................................give it a try.
Here is the link
http://download.cyanogenmod.org/?device=togari&type=
Edit: Running the latest nightly for two straight days just aw************* buttery smooth and awesome battery life works like charm...............By the way i am a heavy user lot's of videos and net about camera it's you know ok....
awesome. good work man
been using it for the past few days and it's pretty much all good (apart from the camera)
I'd love someone to build an unofficial build with lockscreen notifications tho. i'd do it myself if i could ><
What's the difference ...
Whats the difference between the builds on the official CM site like these:
http://download.cyanogenmod.org/?device=togari&type=[/QUOTE]
And the FreeXperia builds from here:
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
Is it a different team? Same team just posting later? Or something else?
lkirkw said:
Whats the difference between the builds on the official CM site like these:
http://download.cyanogenmod.org/?device=togari&type=
Click to expand...
Click to collapse
I haven't tried any of the builds, but the FXP team collaborates with Sony.
Sent from my C6833 using Tapatalk
lkirkw said:
Whats the difference between the builds on the official CM site like these:
http://download.cyanogenmod.org/?device=togari&type=
Click to expand...
Click to collapse
And the FreeXperia builds from here:
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-11
Is it a different team? Same team just posting later? Or something else?[/QUOTE]
@lkirkw the FXP project release cm builds unofficially while these are the official cm builds....means get update on regular basis bug fixes on the go......
LordManhattan said:
I haven't tried any of the builds, but the FXP team collaborates with Sony.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
@LordManhattan ....MR.Manhattan what the hell man what are you doing .............................
Missing the awesomeness.............................
mathurmatt said:
@LordManhattan ....MR.Manhattan what the hell man what are you doing .............................
Missing the awesomeness.............................
Click to expand...
Click to collapse
I'm like the GPe ROM better. It's just so... bug free (running stock rooted now though)
Sent from my C6833 using Tapatalk
LordManhattan said:
I'm like the GPe ROM better. It's just so... bug free (running stock rooted now though)
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I normally flash all the roms as well but since I've flashed the gpe rom I haven't bothered with the others the GPe rom just works great have been on it for a month now
Sent from my C6806_GPe using XDA Premium HD app
I just get a bit loop no matter what I do. I've tried installing it a thousand different ways wiping this and that. I can even install the free xperia project one, but when I upgrade to the latest nightly out goes into a bit loop. I have up on it and installed Paranoid Android.
Sent from my Xperia Z Ultra using xda app-developers app
alphaandomega said:
I just get a bit loop no matter what I do. I've tried installing it a thousand different ways wiping this and that. I can even install the free xperia project one, but when I upgrade to the latest nightly out goes into a bit loop. I have up on it and installed Paranoid Android.
Sent from my Xperia Z Ultra using xda app-developers app
Click to expand...
Click to collapse
how did you flash exactly tell step by step cause flashed almost every nightly never had the problem
mathurmatt said:
how did you flash exactly tell step by step cause flashed almost every nightly never had the problem
Click to expand...
Click to collapse
You must have a C6833. I have a 02. I flashed every which way. From 4.3 and from 4.4, from BE ROM and from AOKP ROM, with wipe and without wipe, wiping dalvik and cache before, after and before and after. I spent an entire day. Flash boot.img and everything else I could think of. Nothing works. I just found out from another thread it's a common problem for the 02 model since February 12. It just keeps giving me the boot loop.
alphaandomega said:
I just get a bit loop no matter what I do. I've tried installing it a thousand different ways wiping this and that. I can even install the free xperia project one, but when I upgrade to the latest nightly out goes into a bit loop. I have up on it and installed Paranoid Android.
Sent from my Xperia Z Ultra using xda app-developers app
Click to expand...
Click to collapse
alphaandomega said:
You must have a C6833. I have a 02. I flashed every which way. From 4.3 and from 4.4, from BE ROM and from AOKP ROM, with wipe and without wipe, wiping dalvik and cache before, after and before and after. I spent an entire day. Flash boot.img and everything else I could think of. Nothing works. I just found out from another thread it's a common problem for the 02 model since February 12. It just keeps giving me the boot loop.
Click to expand...
Click to collapse
Well first of all i also have c6802 ............... It's not the issue with 33 or 02 ,06 nothing at all i can guarantee it....... let start from other rom as you said you flashed aokp rom ,,,, now put the cm rom into sdcard boot into recovery twrp preferred wipe check cache dalvick cache system data if you can back up your internal storage wipe data internal storage also(just do it one time as you suffered a lot).........After that reboot into recovery and simply power off the phone now extract the boot.img from cm zip.....put it anywhere opern flashtool connect your device into fastboot mode and flash your boot.img through it......... now boot straight to recovery and flash the rom...............done and about 99.9% sure it will go just fine ........:good:
mathurmatt said:
Well first of all i also have c6802 ............... It's not the issue with 33 or 02 ,06 nothing at all i can guarantee it....... let start from other rom as you said you flashed aokp rom ,,,, now put the cm rom into sdcard boot into recovery twrp preferred wipe check cache dalvick cache system data if you can back up your internal storage wipe data internal storage also(just do it one time as you suffered a lot).........After that reboot into recovery and simply power off the phone now extract the boot.img from cm zip.....put it anywhere opern flashtool connect your device into fastboot mode and flash your boot.img through it......... now boot straight to recovery and flash the rom...............done and about 99.9% sure it will go just fine ........:good:
Click to expand...
Click to collapse
OK, thanks for trying with me. I've done a nandroid backup and proceeded with the upgrade, using the latest boot.img. Same thing - boot loop. Which is weird. I've never had a problem with CM. I can install every other ROM without any problems - I don't understand why it's so difficult with CM this time. I have install the Free Xperia project version of CM and all goes well, I can boot into it. I've tried upgrading to the newer version - I see the "Android is upgrading..." message, then Finishing boot... and it stays of finishing boot for a long time then restarts and goes into a boot loop. SIGH. No more CyanogenMod for me, I guess. But thanks a lot for trying to help me here! Really appreciate you having spent your time. Cheers!
alphaandomega said:
OK, thanks for trying with me. I've done a nandroid backup and proceeded with the upgrade, using the latest boot.img. Same thing - boot loop. Which is weird. I've never had a problem with CM. I can install every other ROM without any problems - I don't understand why it's so difficult with CM this time. I have install the Free Xperia project version of CM and all goes well, I can boot into it. I've tried upgrading to the newer version - I see the "Android is upgrading..." message, then Finishing boot... and it stays of finishing boot for a long time then restarts and goes into a boot loop. SIGH. No more CyanogenMod for me, I guess. But thanks a lot for trying to help me here! Really appreciate you having spent your time. Cheers!
Click to expand...
Click to collapse
Well That was all i had Guess miscalculated by 0.01%.............

Categories

Resources