i have made mess with my note 2 while flashing , i dont know what happen , but no network , internal memory, 4gb , flashing with odin it happned, plz help me, i was rooted first , then i flashed with odin stock rom, plzzzzz help me, baseband , imie, all showing unknown
plz help, plzzzz
Go find all of the stock files needed to flash back to stock. I know there should be at least a PIT and a ROM to flash. Also, try flashing the latest radios through a recovery to see if your baseband comes back. Also, make sure all the files you get are for your specific phone. There are at least 4 variants of the Note 2 so be careful which files you use.
Sent from my SCH-I605 using Tapatalk 4
SCH-I605
how to do , plz provide link , my model no is - SCH-I605,
help me plz
http://forum.xda-developers.com/showthread.php?t=2196891
Nice poll by the way
nothing happening
it show s shame
There is a solution.... use repair rom
Sent from my SCH-I605 using xda app-developers app
NOTE 2
But where can i get , plzzz help
It would help if you actually said what you were flashing and what exactly you did.
The following thread contains instructions on how to root, unlock, and return to stock.
http://forum.xda-developers.com/showthread.php?t=2024207
Sent from my SCH-I605 using XDA Premium 4 mobile app
verizon note2
plzzzzz help me, baseband , imie, all showing unknown, i have tried with all step but still show same
Mail me for solution at Nikhil.kdhand at gmail
Sent from my SCH-I605 using xda app-developers app
If you would take the time to actually read through any of the stickies, you'd know how to fix your phone. From the sounds of it, you flashed your phone with a ROM/Odin package meant for a completely different device. You need to flash with a full stock Odin package and PIT file to fix things. Read the stickies in the development section. All the information is there, there is no need for hand holding as the step-by-step instructions are already available. I'd also suggest to leave your phone fully stock in the future and not do anything until you learn how to fix it yourself.
Plz hepl in solving this problem, provide the link
latif_an said:
Plz hepl in solving this problem, provide the link
Click to expand...
Click to collapse
If you have the Verizon version of the note 2, SCH-I605, then I have already given you the link that has the odin and pit file.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Exact same problem
I have the exact same issue and flashing back using ODIN and the appropriate PIT file doesn't seem to be working. Plus it is really challenging to get the right driver setup going to be able to re-write the IMEI back to the phone using the other methods on here.
It takes a lot of time and patience, and trial and error. but it isn't helpful to be condescending on here; remember, someone helped you out when you didn't know what you were doing and got stuck at one point or another, whether it was rooting a phone or learning to walk.
@latif_an [and anyone else who ends up here] here is a link to the IMEI restore method using CASUAL.
http://forum.xda-developers.com/showthread.php?t=2077653
I'm stuck because I'm on a Mac, and don't have access to PC hardware. But if you have a PC, this in addition to the other link above may help.
lol....im in the same boat, unkown baseband, ime, meid ect. tried flashing back to stock with the pit....on all 3 bases. System boots up fine on all three, but no base band. Try flashing modems and restoring IMEI...and im pretty much at a loss now lol
This is solved problem long back. .. Pl read the like post of the past for solution
Sent from my SCH-I605 using XDA Premium 4 mobile app
Related
This message is for people who have rooted/flashed their Samsung Galaxy S3. I need help please. I followed the steps in the video How to Root Samsung Galaxy S III [its the first video suggestion] and I got up to 3:44. Instead of it saying pass, it said "RESET!" The picture says it all. I had to unplug the phone and turn it back on because it turned off but for some reason odin did not reboot it. Now everytime I try to turn it on it goes to the SAMSUNG screen for 2 seconds and shuts off. The only thing I can access is download mode. I'm a major noob when it comes to rooting/flashing. The settings in download mode say:
ODIN MODE
PRODUCT NAME: SCH-R5830U
CUSTOM BINARY DOWNLOAD: Yes (6 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Can someone please help me? PLEASE. It would be great if I could get a reply by tonight.
Update your details of instalation and stuff please
Sent from my GT-I9300 using xda premium
Press THANKS if i could help you!
PLEASE PLEASE FOR THE LOVE OF GOD DON'T FLASH ANYTHING FROM THIS FORUM TO YOUR PHONE.
You have a US variant phone. This forum is for the international version.
Sent from my GT-I9300 using Tapatalk 2
It won't let me go to recovery mode. The only thing I can access is Download Mode.I think the problem is that I flashed it with the i9300, which is different from my device. I do not want to root my phone, I want to delete any file that I downloaded into it. My binary is custom and my system status is official. How do I fix this?
Download and flash stock firmware for your phone. You can't reset the flash convert though.
Sent from my GT-I9300 using Tapatalk 2
dr.m0x said:
PLEASE PLEASE FOR THE LOVE OF GOD DON'T FLASH ANYTHING FROM THIS FORUM TO YOUR PHONE.
You have a US variant phone. This forum is for the international version.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I found every forum except a US Cellular one. You know where I can start a thread in one?
dr.m0x said:
Download and flash stock firmware for your phone. You can't reset the flash convert though.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Can I get a link to a download? And this is the tar I originally installed into my phone. I thought if I tried several times more it wouyld would, but, it obviously didn't
boot-insecure-xxale8-cwmtouch-gsm
I think I found a .rar file to fix it but I dont know how to use it in odin. The file has folders in it.
Unroot-UninstallBusybox-CwmManager-S3Int
Verizon or Sprint?
Sent from my GT-I9300 using Tapatalk 2
to find your software for your phone go to Sammobile click on the firmware tab Close the anoying Add Click on Firmware and files and follow through the instructions to your phone, for the $10 cost its worth buying access to the hotfile down load then flash via odin MAKE SURE IT IS FOR YOUR PHONE OR YOUR PHONE WILL MAKE A NICE PAPER WEIGHT
yaaay! i successfully upgrade my sgs player to 2.3.6
thanks to sir zaclimon for the help!
im thankful to have u in this section sir
Sent from my YP-G1 using xda premium
so sad, no one are helpful in this section..
i chose a wrong device, unlike in SGY people are kind and helpful...
rockerblood said:
so sad, no one are helpful in this section..
i chose a wrong device, unlike in SGY people are kind and helpful...
Click to expand...
Click to collapse
Do not say that we are not helpfull man!
Maybe no one that read your post has found a solution yet!!!
I actually stopped in this thread once ready to help this guy out but he mentions he is on froyo...
MY device came with Gingerbread, so rooting is as easy as user superoneclick (heck, there is a youtube video talking about how easy it is to root on the 5 but the 4 will be able to do the same). Sadly, advising this with this froyo uncertainty might have the potential of bricking the device, so I passed by this thread saying nothing. So I'll just do this...
Did you do a OTA update through your device's settings and check if there is a Firmware update? Once in Settings, go near the bottom and click the ABOUT button and click system updates - wifi is of course needed but wifi is everywhere even Mcdonalds for free. Update your rom accordingly to get to Gingerbread at least on the device. Then check this video -
www.youtube.com/watch?v=aA4bw8bU4T4
Once rooted, check this thread to choose your kernal and rom you want to flash -
http://forum.xda-developers.com/showthread.php?t=1720457
I highly advise Ethereal rom [or Icy Fusion], and for the kernal Terrasilent [or Klin Rev 3] . Be sure to flash the Kernal FIRST not the rom so you can have recovery features in case things go wrong.
P.S. You probably got bypassed btw due to heavy focus is being brought towards other thread s like the ICS thread for 4.0 device or everyone has a thread they particular hang out in. Or it could be that these type of threads like yours pop up so often every month that the people here just glaze over the threads like these telling themselves why don't they do a search in google (like I searched "root samsung Galaxy Player 4" and my first link above is the first one that pops up in google, which is the video i referenced to root mine the first time) or check the All in one thread in the developers section of the Samsung Galaxy Player 4/5 forum (which I linked above as well). I don't mind helping though but that might be because I'm kinda still new here...
da1writer said:
I actually stopped in this thread once ready to help this guy out but he mentions he is on froyo...
MY device came with Gingerbread, so rooting is as easy as user superoneclick (heck, there is a youtube video talking about how easy it is to root on the 5 but the 4 will be able to do the same). Sadly, advising this with this froyo uncertainty might have the potential of bricking the device, so I passed by this thread saying nothing. So I'll just do this...
Did you do a OTA update through your device's settings and check if there is a Firmware update? Once in Settings, go near the bottom and click the ABOUT button and click system updates - wifi is of course needed but wifi is everywhere even Mcdonalds for free. Update your rom accordingly to get to Gingerbread at least on the device. Then check this video -
www.youtube.com/watch?v=aA4bw8bU4T4
Once rooted, check this thread to choose your kernal and rom you want to flash -
http://forum.xda-developers.com/showthread.php?t=1720457
I highly advise Ethereal rom [or Icy Fusion], and for the kernal Terrasilent [or Klin Rev 3] . Be sure to flash the Kernal FIRST not the rom so you can have recovery features in case things go wrong.
P.S. You probably got bypassed btw due to heavy focus is being brought towards other thread s like the ICS thread for 4.0 device or everyone has a thread they particular hang out in. Or it could be that these type of threads like yours pop up so often every month that the people here just glaze over the threads like these telling themselves why don't they do a search in google (like I searched "root samsung Galaxy Player 4" and my first link above is the first one that pops up in google, which is the video i referenced to root mine the first time) or check the All in one thread in the developers section of the Samsung Galaxy Player 4/5 forum (which I linked above as well). I don't mind helping though but that might be because I'm kinda still new here...
Click to expand...
Click to collapse
a big thanks to you sir, you lighten up my brain I found that this device is far from Galaxy Y modding so i'm a bit unsure what to read and follow.. BTW THANKS A LOT SIR, this will be a big help
giving you a feedback in PM if possible ... thanks again
rockerblood said:
a big thanks to you sir, you lighten up my brain I found that this device is far from Galaxy Y modding so i'm a bit unsure what to read and follow.. BTW THANKS A LOT SIR, this will be a big help
giving you a feedback in PM if possible ... thanks again
Click to expand...
Click to collapse
Dang people what's wrong with you!!! (kidding ). Hmm if you want GB I can offer you the 2.3.6 update in a separate tar and you can flash it from here. From this point, you can flash any custom rom based on stock. Dang froyo, for how much time you had this?
Can i sir? Include the tutorial too
Btw i cant see any system update under setting and about device..
Sent from my GT-S5360 using xda premium
Sent from my GT-S5360 using xda premium
I have a YP-G1 too, but I have a Mac. I can't run super one click, so do you guys know an alternate way to root it?
Sent from my Xoom using xda app-developers app
Maybe i should give up to update my device to 2.3.5 i have no Service Pack 3 on PC and no one knows even samsungsupport at twitter how can i possibly upgrade with that pc environment. Maybe flashing thru odin but until now there is no way to use odin to upgrade
Sent from my GT-S5360 using xda premium
rockerblood said:
Maybe i should give up to update my device to 2.3.5 i have no Service Pack 3 on PC and no one knows even samsungsupport at twitter how can i possibly upgrade with that pc environment. Maybe flashing thru odin but until now there is no way to use odin to upgrade
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Well the 2.3.6 update is here for almost 1 year so yeah there is a way to update to 2.3.6 . I'll include the link for you to update your SGSW (I didin't forget you did I ). I'm uploading it right now.
EDIT: The update is here!!
2.3.6 Update Download
Sir can u include the installation instructions
Sent from my GT-S5360 using xda premium
Still at 2.2.2 sucks. Odin doesnt detect my Galaxy Player 4.0
Sent from my GT-S5360 using xda premium
You can use Samsung's Kies to upgrade to the latest firmware.
However if you have rooted and modified some stuff, there might be a chance of getting your device bricked.
Also, make sure you have pressed Power+VolDown+Home key to get into flashing mode when you use odin.
rockerblood said:
Still at 2.2.2 sucks. Odin doesnt detect my Galaxy Player 4.0
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Have you tried another usb plug? Also are you sure that your drivers are installed?
Yeah i know how to use odin and flashin like what i did to my galaxy y tried almost all custom rom. This galaxy player only gives me a hard time on flasing.
Of course i know if the device is rooter and modified or not
Sent from my GT-S5360 using xda premium
zaclimon said:
Have you tried another usb plug? Also are you sure that your drivers are installed?
Click to expand...
Click to collapse
At odin window click troubleshoot and then driver will install. Is that correct?
Sent from my GT-S5360 using xda premium
rockerblood said:
At odin window click troubleshoot and then driver will install. Is that correct?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Wait a minute, which odin are you using? You need odin 1.7 to flash on the YP-G1.
Yes sir i use the one in ur thread 1.7. My galaxy y detects odin but my yp is not. Maybe i should use the own yp usb cable and not the cable from sgy do u think thats the problem?
Sent from my GT-S5360 using xda premium
rockerblood said:
Yes sir i use the one in ur thread 1.7. My galaxy y detects odin but my yp is not. Maybe i should use the own yp usb cable and not the cable from sgy do u think thats the problem?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Maybe, I never saw a case where a phone is recognized and the other device isn't. The only alternative I could is is heimdall but it's longer than odin. Assuming you have tried all the usb ports on your computer. Have you tried to flash on another computer?
NOT YET SIR, maybe i should try to other PC with vista OS
heimdal is for linux os isn't?
Haven't been on this forum in years and now back. Looking at getting the Galaxy S3 from ATT as the new iphone doesn't seem worth it after all this wait. I have never used any android device before so know nothing about their OS or anything really. I've used HTC Tilt2 device which was probably my last device on this forum and flashed roms and all that just fine. Looking on here though for the past hour i can't find like a tutorial on how to flash roms? Do i need to unlock my stock phone first?
I see people talk about using Odin which sounds like this is a flashing software for roms?
I'm really interested in flashing this rom, http://forum.xda-developers.com/showthread.php?t=1797334 as it seems like a stock rom but with all the upgrades in speed/stability/etc. How would i do this and safely?
What are the fail safe procedures such as i get a bad flash what do i do? Phone doesn't finish flash and gets stuck on boot logo what do i do? If im at work and this happens can i fix it via SD card while on the go?
I remember there usually being a sticky that answers this kind of stuff but have read all the stickies for this sub-forum device and found none that in layman's terms describes the above?
I will be reading much more on this site trying to figure this thing out but this really all is Chinese to me as i know nothing about android and their OS or flashing procedures. Remember the days of a simple rom flash on my Tilt2 device took about 30 seconds no brainer. I some how can't understand this stuff though. Greatly appreciate if anyone can answer the above questions and/or point me in the right directions as a total 100% noob to android and this phone. Thank you for your time.
Unless you want a bricked device....do not flash any roms from this section! These are for the international variant only!
Sent from my GT-I9300 using xda premium
Go here for At&t:
http://forum.xda-developers.com/showthread.php?t=1802160
Sent from my GT-I9300 using xda app-developers app
First root your CURRENT ROM and than make a nandroid backup on SD card and than go to http://forum.xda-developers.com/forumdisplay.php?f=1705 forum and you can find everything about the AT&T variant Galaxy sIII...
Happy Flashing....
Check
www.Galaxys3root.com
It contains all guidance about rooting and flashing roms in all international And S3 variants.
You may also search for zedomax profile on xda about all these things. He is a helping guy host of www.Galaxys3root.com
Sent from my GT-I9300 using Tapatalk 2
I updated my friends Galaxy S2(I9100g) to 4.1.0 by downloading files from sammobile and then used odin.
But after flashing the files it shows Enter encryption code to use device storage.
I have tried almost everything but failed.
then I contacted to Samsung care and they says that its a motherboard issue. but how it is possible, I mean the device is not even rooted in past and not a single custom rom is flashed on it.
Then whats the issue is about and how can I solve this?
amol8356 said:
I updated my friends Galaxy S2(I9100g) to 4.1.0 by downloading files from sammobile and then used odin.
But after flashing the files it shows Enter encryption code to use device storage.
I have tried almost everything but failed.
then I contacted to Samsung care and they says that its a motherboard issue. but how it is possible, I mean the device is not even rooted in past and not a single custom rom is flashed on it.
Then whats the issue is about and how can I solve this?
Click to expand...
Click to collapse
A rule...you don't flash or upgrade with encryption on. Chances are there is no way bk. If you solve this pls repost how you did this. A lot of people have this problem with no way bk.
andrewwright said:
A rule...you don't flash or upgrade with encryption on. Chances are there is no way bk. If you solve this pls repost how you did this. A lot of people have this problem with no way bk.
Click to expand...
Click to collapse
well I know that..thats why after upgrading device I ask to my friend that do you have encryption on?
he replied "what was that?, I don't know what is encryption and how to on it.
I think you understand now..
Think your mate is playing dumb. Sorry. It don't just come on you see. He's turned it on and set the pin so he must no about it.
andrewwright said:
Think your mate is playing dumb. Sorry. It don't just come on you see. He's turned it on and set the pin so he must no about it.
Click to expand...
Click to collapse
That may be possible but as per I know he doesn't know anything about the encryption option.
So what will I do to clear this issue.
I found a similar thread here's the link.
http://forum.xda-developers.com/showthread.php?t=2114380
I tried the same procedure given in thread that to enter the wrong password for few times(in my case 40-50 times) but nothing happened.
You could try the jb leak firmware and try to do what's done in the link. May work. Have you tried to format the SD card and format system, data,cache?
andrewwright said:
You could try the jb leak firmware and try to do what's done in the link. May work. Have you tried to format the SD card and format system, data,cache?
Click to expand...
Click to collapse
yup, I have formatted everything by entering stock recovery and then using wipe data/factory reset. but failed.
will you please tell me that where this encryption code or any other codes are stored in device?
Factory reset is not format. Flash siyah kernel and format in that recovery. Under mounts and storage.
Will u provide me link for that kernel???plz
Sent from my GT-I9082 using xda premium
And i think that this kernel is for i9100 while i am having i9100g.
So can i use this kernel for my device??
If not, plz provide a suitable kernel link.
Sent from my GT-I9082 using xda premium
Go with philz kernel for ease. Same thing really. Main thing is you end up with cwm.
Ok. I will try.
Sent from my GT-I9082 using xda premium
Is worth a try.
But i dnt hv the device with me now. It is in service centre.
So few days are required to get it back.
Sent from my GT-I9082 using xda premium
Service center can fix this. Why ask if you put it in for service??
First thing is that..it is out of warranty and second thing is at service centre they said me that its motherboard issue and you need to change that, but cost is about 8500/- INR.
Sent from my GT-I9082 using xda premium
I get it . and you want to know if it can be fixed.
Yup...actualy i cant afford that much prize for it.
Thats why came here to ask.
Sent from my GT-I9082 using xda premium
I dont blame you for doing that.:thumbup: Is your mate saying you have to pay to fix this then? :thumbdown:
Not actually...i just feel emberrased thts why.
Sent from my GT-I9082 using xda premium
Lg g2 "cross dll" or "device model different" or "fota/laf partion changed" solved
MOD EDIT User is no longer on XDA
Thread closed
sorry for my English but I have to say thank you.
I really thought that the cell was completely bricked but no. thank you for the guide. You save me!
elecmati said:
sorry for my English but I have to say thank you.
I really thought that the cell was completely bricked but no. thank you for the guide. You save me!
Click to expand...
Click to collapse
Its my pleasure to help you dear...
If you liked my worked then you can donate any amount with ur will..
If you can not donate still i m happy to assist you..
Hit like button...
Sent from my LG-D800 using XDA Free mobile app
Thank you for your help to save my phone.:good:
aftabalam8c2 was great in helping me hard unbrick
Thank you greatly to aftabalam8c2
I hard bricked my LG L22 (owing to wrong SuperSU binary update) and led to a total no recovery, no download, blank screen hardbrick.
He guided me on Ubuntu to copy back the extracted TOT files back in to partition.
He was one great guy in patiently and promptly guiding me back to recovery.
Thanks so much for your good gesture.http://cdn4.xda-developers.com/images/icons/icon14.gif
My pleasure to help you..
Sent from my LG-D800 using XDA Free mobile app
emailpeter said:
Thank you greatly to aftabalam8c2
I hard bricked my LG L22 (owing to wrong SuperSU binary update) and led to a total no recovery, no download, blank screen hardbrick.
He guided me on Ubuntu to copy back the extracted TOT files back in to partition.
He was one great guy in patiently and promptly guiding me back to recovery.
Thanks so much for your good gesture.http://cdn4.xda-developers.com/images/icons/icon14.gif
Click to expand...
Click to collapse
I only guided u and correct your mistake..
And the rest hard work done by you..
Thanks..dear
Sent from my LG-D800 using XDA Free mobile app
Do you get some IMEI issue after this?(i mean showing NULL in IMEI option and unknown Baseband.)
I had bricked my phone at the time of installing TWRP with Autorec.apk because phone comes installed with D80220b firmware and when i flashed phone got into Fastboot mode.(After that i have discovered that it has D800 hardware in it. After some flashes and searching(the method you posted) i successfully got it back but with IMEI issue. LG Flash tool is detecting my IMEI at the time of flashing but in phone its showing NULL.
I have tried this http://forum.xda-developers.com/showthread.php?t=2701861 but stuck at Step 7 getting some "disk error" . Any way do you know?
the orginal repair using this method orginated by me in the spring lg g2 threads under general, in proper credits here, i wrote the fix on jan 2nd, while thi thread started on jan 15th heres my thread i wrote to fix this problem, i do however like this guide so that credit you deserve just please if ya find a thread and feel you have a better way of explaining at least post link to the sourse where you obtained your information. Thanks
http://forum.xda-developers.com/sprint-g2/general/dll-to-bypass-lg-flash-tool-model-check-t2990665
surender2121 said:
Do you get some IMEI issue after this?(i mean showing NULL in IMEI option and unknown Baseband.)
I had bricked my phone at the time of installing TWRP with Autorec.apk because phone comes installed with D80220b firmware and when i flashed phone got into Fastboot mode.(After that i have discovered that it has D800 hardware in it. After some flashes and searching(the method you posted) i successfully got it back but with IMEI issue. LG Flash tool is detecting my IMEI at the time of flashing but in phone its showing NULL.
I have tried this http://forum.xda-developers.com/showthread.php?t=2701861 but stuck at Step 7 getting some "disk error" . Any way do you know?
Click to expand...
Click to collapse
Did u Flash stock rom after flashing unmodified file.
If still u facing prob then u can recover imei no.
There are several method.
Google it.
Sent from my LG-D800 using XDA Free mobile app
LGMONO said:
the orginal repair using this method orginated by me in the spring lg g2 threads under general, in proper credits here, i wrote the fix on jan 2nd, while thi thread started on jan 15th heres my thread i wrote to fix this problem, i do however like this guide so that credit you deserve just please if ya find a thread and feel you have a better way of explaining at least post link to the sourse where you obtained your information. Thanks
http://forum.xda-developers.com/sprint-g2/general/dll-to-bypass-lg-flash-tool-model-check-t2990665
Click to expand...
Click to collapse
Dear..
The solution of first two error is not my work.
And i never claimed that in this thread.
And coz i have posted it on 15 jan so it doesnt mean this methods were not knon by me....
I am doing this method to unbrick lg g2 of pepole since 6 to 7 month..
This work is credited to few chinese and vietnamese moders and repairer
This method is available on internet since 2013..
I just thought to give a summarized solution if all the error.
And the last error is
Laf or fota partion is my work..
I had faced this problem and solved this my self.
I can provide u all the links in chinese and others language that describe this method.
If u still think it is your work..
Coz u posted this 13 days before me..
Then i give all credit to you..
I dont do anything for getting credit.
I just wanted to help others.
So all guys on xda....the credit for this work goes to mr. LGMONO
THANKS..
Sent from my LG-D800 using XDA Free mobile app
I am using hex editor from my day of college to run some software by changing their version no.
I m using this trick from 6 year..
Its not a new dude...
Even i used hex editor on ny symbian devices.
Anyway...
I don't need any credit...
Sent from my LG-D800 using XDA Free mobile app
The LGUP.dll's seem to share a common name on all variants but are different sizes. Thus far I have not found one that will work across all devices.
Have you found that one should use the LGUP.dll for the actual variant of the phone (internal hardware wise), or use the dll for the variant that Flash Tools believes the phone to be?
iowabowtech said:
The LGUP.dll's seem to share a common name on all variants but are different sizes. Thus far I have not found one that will work across all devices.
Have you found that one should use the LGUP.dll for the actual variant of the phone (internal hardware wise), or use the dll for the variant that Flash Tools believes the phone to be?
Click to expand...
Click to collapse
You general dll file..
LGUP_8974.dll
It can be used for any variant of g2.
And even it avoid many errors.
I personally use genral dll file..
Hope it helps u
Sent from my LG-D800 using XDA Free mobile app
aftabalam8c2 said:
You general dll file..
LGUP_8974.dll
It can be used for any variant of g2.
And even it avoid many errors.
I personally use genral dll file..
Hope it helps u
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Again, I have not found that to be true. LGUP.dll files can be extracted from kdz's. Depending on which variant's kdz was used, that file, although called the exact same name across all variants, are different. They vary in size. And I have observed multiple instances where using the wrong LGUP.dll results in a failed flash.
aftabalam8c2 said:
Dear..
The solution of first two error is not my work.
And i never claimed that in this thread.
And coz i have posted it on 15 jan so it doesnt mean this methods were not knon by me....
I am doing this method to unbrick lg g2 of pepole since 6 to 7 month..
This work is credited to few chinese and vietnamese moders and repairer
This method is available on internet since 2013..
I just thought to give a summarized solution if all the error.
And the last error is
Laf or fota partion is my work..
I had faced this problem and solved this my self.
I can provide u all the links in chinese and others language that describe this method.
If u still think it is your work..
Coz u posted this 13 days before me..
Then i give all credit to you..
I dont do anything for getting credit.
I just wanted to help others.
So all guys on xda....the credit for this work goes to mr. LGMONO
THANKS..
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
I am not all all discrediting your guide at all i think this guide is better then mine and i promote passing information throughtout the forms, this is our job, the dll file and guide i wrote was referenced by another thread that was seriously almost close to non imposssible to find and after obtaining the tools to apply this fix it was days after i decided to post a sloppy guide, i did mention (http://forum.xda-developers.com/sprint-g2/help/soft-hard-unbrick-build-prop-stuck-t2981228) that i retieved the informatoin somewhere on the forms just could not re find the orginal person who provided the dll file to fix this issue, i do not want you thinking i replied to take any credit for you, so with that said
I thank you for your hard work and this awesome guide you provided to the XDA Community and I apologize for any misunderstanding.
i beleive I thanked you post here as well.
Sincerely LGMONO
HEHE GOod boy great
tungkick said:
HEHE GOod boy great
Click to expand...
Click to collapse
Thank you sir.
I dedicate this thread to you mr. Tungkick..
U are great sir.
Super great
Sent from my LG-D800 using XDA Free mobile app
I have been used this solution for error message wrong model.I have changed dll (ex. D802 - > F320) file only and try to flash again it's working.
aftabalam8c2 said:
Did u Flash stock rom after flashing unmodified file.
If still u facing prob then u can recover imei no.
There are several method.
Google it.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, i did. tried several methods but nothing works.
Can you provide?