I bought Fujitsu Arrowsx F02E phone last week. Great Japan phone for low price. It works great(Fingerprint sensor exelent :fingers-crossed. But,
1. When I turn on GPS using 3G network it restarting again and again(GPS work fine with Wifi)
2. Antutu benchmark shows lower score for processor and GPU (Compared with HTC one X(Both has Nvidia tegra 3)) HTC one x has 1.5quad but this phone has 1.7quad :laugh: . So, why lower score?
3. Asphault 7 not working also(Game opened its Menu is slow and game not started).
Please help me ASAP.
And Can someone please tell me where Can I find custom rom for this?
bump
bump
kk
wkh7777 said:
bump
Click to expand...
Click to collapse
Plz help
i have exactly the same problem with gps on this phone...
have you found some solution by now, perhaps?
To OP:
1.
GPS will crash the phone to restart is normal for ALL NTT Docomo NEXT series Smartphones. I have confirmed with my F-02E, F-06E, SH-06D and an even older NEC MEDIAS.
To use the GPS on these devices, you will have to turn on the Airplane mode to work if you are outside of Japan and is using a foreign SIM card. (GPS will work fine with 3G or 4G LTE Xi with a Docomo USIM in Japan)
*****(Though I have read somewhere that a non-Docomo 128kb MicroSIM might do the trick, but I do not have one to test)*****
Also do not expect the GPS to be as fast and accurate as the Galaxy S3/S4 as the F-02E does NOT support GLONASS.
The GPS receiver is optimized for Japan region only (maybe can change satellite list after root).
A-GPS for faster GPS lock is DISABLED without a Docomo SIM.
2.
The reason for the lower score is because of the lack of optimization, as well as all the BLOATWAREz Docomo has preloaded on the phone. To uninstall these Docomo software (useless outside of Japan), you have to r00t.
Fujitsu kind of failed with the F-02E. Even after the V17 update, Android 4.1.2 is really unstable on the phone. I had the OS crashed in several occasions in different apps and some games.
To get the best performance out of the F-02E, you have to flash a cooked ROM.
Though the stock OS is much faster and stable on the F-06E, though in synthetic benchmark, the F-06E still scored lower than my Galaxy S4 -i337m
3.
Asphalt 7 works fine for me on my F-02E. Also gameplay is rather smooth offscreen at 1080p.
Asphalt 8 works good too, but some occasional frame drops on complex maps.
Shadowgun and DeadTrigger both plays buttery smooth.
Epic Citadel Unreal 3 Benchmark, the F-02E at 1080p on Best Quality setting gets around 30fps - 40fps (Tegra 3 works better on 720p screens, and again lack of optimization from Fujitsu on the software side)
Hope this helps.
Cheers
you're great, man! thanx a lot for your answer -
but where can i find that cooked rom for f02-e?
ndandy said:
you're great, man! thanx a lot for your answer -
but where can i find that cooked rom for f02-e?
Click to expand...
Click to collapse
You will have to find some clues on Japanese BBS boards (2ch etc **NSFW)
Development for this phone in Japan is gathering more people as the average retail no contract price of a brand new F-02E in Japan costs around $160-$180 since around May-June of 2013
You can also find active development in some Chinese forums
mms6 said:
To OP:
1.
GPS will crash the phone to restart is normal for ALL NTT Docomo NEXT series Smartphones. I have confirmed with my F-02E, F-06E, SH-06D and an even older NEC MEDIAS.
To use the GPS on these devices, you will have to turn on the Airplane mode to work if you are outside of Japan and is using a foreign SIM card. (GPS will work fine with 3G or 4G LTE Xi with a Docomo USIM in Japan)
Click to expand...
Click to collapse
I use F-06E with 3G operator and have no problems with GPS, no reboots, navigation apps work good.
Also, I had F-02E, it could not find any satellites at all.
psylence84 said:
I use F-06E with 3G operator and have no problems with GPS, no reboots, navigation apps work good.
Also, I had F-02E, it could not find any satellites at all.
Click to expand...
Click to collapse
You might have a 128k MicroSIM card with your F-06E.
My 64k Rogers Wireless MicroSIM make both my F-02E and F-06E reset when GSM and/or HSPA is turned on (mobile data on/off does not matter), and GPS is on and searching for satellite for location.
***NOTE*** If the GPS is just on and not searching for any satellites, the phone will not reset.
Regarding your F-02E does not find any Satellites in Moscow (Your Location).
The F-02E will find a GPS lock eventually, but it may be unstable and take quite long time to lock. The main problem is because the GPS receiver chip in the F-02E does not support GLONASS, and the GPS locale list is configured in Japan region. So outside of Japan region, GPS will be flaky without rooting and updating the GPS locale conf.
The F-06E on the other hand does have GPS/aGPS and GLONASS support as part of the Qualcomm S600 platform SoC. GLONASS lock should not be a problem.
***NOTE*** The aGPS cellular assisted location service will not work without a Docomo USIM. Hence on phone with only GPS and no GLONASS, like the F-02E, initial lock from cold boot may take some time.
How to change/update GPS locale list
mms6 said:
You might have a 128k MicroSIM card with your F-06E.
My 64k Rogers Wireless MicroSIM make both my F-02E and F-06E reset when GSM and/or HSPA is turned on (mobile data on/off does not matter), and GPS is on and searching for satellite for location.
***NOTE*** If the GPS is just on and not searching for any satellites, the phone will not reset.
Regarding your F-02E does not find any Satellites in Moscow (Your Location).
The F-02E will find a GPS lock eventually, but it may be unstable and take quite long time to lock. The main problem is because the GPS receiver chip in the F-02E does not support GLONASS, and the GPS locale list is configured in Japan region. So outside of Japan region, GPS will be flaky without rooting and updating the GPS locale conf.
The F-06E on the other hand does have GPS/aGPS and GLONASS support as part of the Qualcomm S600 platform SoC. GLONASS lock should not be a problem.
***NOTE*** The aGPS cellular assisted location service will not work without a Docomo USIM. Hence on phone with only GPS and no GLONASS, like the F-02E, initial lock from cold boot may take some time.
Click to expand...
Click to collapse
I am having the same issue with my F10D, GPS keeps trying to locate satellites. I'm considering rooting it to update the GPS Locale list but I need guidance on how to update such list. Any help will be much appreciated! Thanks.
Even if updating the GPS list, the performance is only bit improvement. The antenna/receiver used in these Fujitsu phones before the Snapdragon 600 ---- F-06E are not great to begin with
If you really want a faster phone GPS, then its time to find other phones
As for a flashable GPS locale config for other countries outside of Japan, it will be hard to find if it even exists
New ROM
mms6 said:
Even if updating the GPS list, the performance is only bit improvement. The antenna/receiver used in these Fujitsu phones before the Snapdragon 600 ---- F-06E are not great to begin with
If you really want a faster phone GPS, then its time to find other phones
As for a flashable GPS locale config for other countries outside of Japan, it will be hard to find if it even exists
Click to expand...
Click to collapse
Thanks a lot for the explanation!
One more question - If I flash the phone and install a new ROM, do you think the GPS may work?
Thanks
OK guys, looks like I found a fix for f02-e reboot issues.. will post it after 48hrs from now. Device is under test. Its been 24hrs since I stated.. no reboots, GPS locks with out any issue. GPS+3g works !
Sent from my F-02E using xda app-developers app
Restarting problems. Need a solution. Please ...
Hello, I bought my unlocked F-02E mobile in Japan this summer and I brought it to Spain. I have disabled some docomo apps but the pone keeps restarting. I couldn't find the way to update or download the V17 firmware upgrade because I don't have any Docomo SIM in order to download it. I don't know if there's some cooked rom available to flash it and get a solution to avoid annoying restarting problems when calling or after calling or using 3G data ... (it happens randomly). I use GSM only here in Spain but when I call with data enabled it also reboots sometimes
Neither I don't know if buying a new 128K micro SIM could help to avoid rebooting issues.
I'll wait for your solution.
Thank you very much in advance.
Best Regards
biswaranjan said:
OK guys, looks like I found a fix for f02-e reboot issues.. will post it after 48hrs from now. Device is under test. Its been 24hrs since I stated.. no reboots, GPS locks with out any issue. GPS+3g works !
Sent from my F-02E using xda app-developers app
Click to expand...
Click to collapse
diamoncito said:
Hello, I bought my unlocked F-02E mobile in Japan this summer and I brought it to Spain. I have disabled some docomo apps but the pone keeps restarting. I couldn't find the way to update or download the V17 firmware upgrade because I don't have any Docomo SIM in order to download it. I don't know if there's some cooked rom available to flash it and get a solution to avoid annoying restarting problems when calling or after calling or using 3G data ... (it happens randomly). I use GSM only here in Spain but when I call with data enabled it also reboots sometimes
Neither I don't know if buying a new 128K micro SIM could help to avoid rebooting issues.
I'll wait for your solution.
Thank you very much in advance.
Best Regards
Click to expand...
Click to collapse
I can understand your frustration and pain.. I have gone through the same for past few months. I had verified with 64k, 128k and 256k sims. None of them fixed the issue. It reboots with any kind of sim. so buying a 128k sim will not help. But, only sim I have not verified is 'LTE sim with 3g/2g support'. It might fix the issue.
However as a workaround, I have modified some android props to suit Indian network conditions and the phone is much stable with a 64k sim now ! Still there were two reboots in three days(found the cause, will fix it) and it never rebooted during call ! Earlier it used to reboot 5-6 times a day. It used to reboot during/after calls, when kept idle, when I am cooking, etc...
Fix is to disable LTE on this phone and set some 3g/2g parameters. Additionally you can set some default locale and gps config too.
Please do the following tweaks and let us know the result.
Steps: (search the forum for appropriate links)
1. root your phone and mount /system as read/write. (must)
2. Now disable LTE and configure 3g/2g parameters: Add the following lines to "/system/build.prop" file. (can directly copy paste the following at end of the file)
# system props for telephony modules
# Disable LTE/4G
ro.config.lte=false
# Set default network to be 3g/2g auto (wcdma preferred)
ro.telephony.default_network=0
# set hsdpa/hsupa categories
ro.ril.hep=0
# hsxpa=2 signifies hsdpa and hsupa. you can leave it as 2.
ro.ril.hsxpa=2
# gprsclass=12 is maximum value it can have. all modern networks should support this, else as a conservative setting try 10.
ro.ril.gprsclass=12
# hsdpa=8 and hsupa=6 signifies 7.2mbps dowenload/5.76mbps upload. If your network supports it, leave it as it is. else try 6/4 for these values
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
# some signal strength, power tweaks
ro.ril.att.feature=1
ro.ril.disable.power.collapse=1
ro.ril.fast.dormancy.rule=1
ro.config.hw_fast_dormancy=1
# fixes connectivity issues, my phone used to loose network very often.
ro.ril.enable.dtm=0
ro.ril.enable.a53=0
# believed to be signal strength tweaks
ro.ril.enable.ncell.ind=1
ro.telephony.ril.v3=signalstrength,singlepdp,skipbrokendatacal
# better voice quality
ro.ril.enable.amr.wideband=1
3. Now set gps settings in build.prop. Add the following lines to "/system/build.prop" file. (can directly copy paste to the file)
# AGPS mode set
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
4. Now change locale settings. (So that when you do a factory reset, it does not show you japanese text) Find out following props and change it. (in "/system/build.prop" )
ro.product.locale.language=en
ro.product.locale.region=US
5. Now lets fix gps settings: (replace contents of "/system/etc/gps.conf" with the following). you should set NTP_SERVERS for your region. rest of the things should be fine for your region.
NTP_SERVER=asia.pool.ntp.org
NTP_SERVER=0.asia.pool.ntp.org
NTP_SERVER=1.asia.pool.ntp.org
NTP_SERVER=2.asia.pool.ntp.org
NTP_SERVER=3.asia.pool.ntp.org
NTP_SERVER=0.vn.pool.ntp.org
NTP_SERVER=1.asia.pool.ntp.org
NTP_SERVER=0.asia.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=0
# Report supl ref location as position, 1=enable, 0=disable
REPORT_POSITION_USE_SUPL_REFLOC=1
# Wiper (wifi positioning), 1=enable, 0=disable
ENABLE_WIPER=1
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_NO_SECURE_PORT=3425
SUPL_SECURE_PORT=7275
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
# FOR C2K PDE SUPPORT, set the following
C2K_HOST=c2k.pde.com
C2K_PORT=1234
CURRENT_CARRIER=common
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# TRUE for "User Plane", FALSE for "Control Plane"
DEFAULT_USER_PLANE=TRUE
6. Change some parameters in "/system/etc/gps/config/pathconfigfile.txt". Replace the file with following content.
#
# Config file
GPSC_CONFIG_FILE /system/etc/gps/config/GPSCConfigFile.cfg
# Patch file
PATCH_FILE /system/etc/gps/patch/patch-X.0.ce
# Aiding file storage
AIDING_PATH /cache/gps/aiding/
#Logger Control
#0->dont log:
#1-> UDP
#2-> NVM
#3-> ANDROID
#4-> STDIO
#5-> CUSTOM FUNC
LOGGER_CONTROL 0
#logger IP & PORT when LOGGER_CONTROL = 1, else ignored
DEBUG_UDP 192.168.16.1 5555
#Logger NVM setting, when LOGGER_CONTROL = 2, else ignored
LOGGER_NVM_FILE /cache/gps/logs/
#Logger - maximum lines in log per file in NVM
MAX_LOG_LINES 100000
#Logger - maximum log files in NVM
MAX_NVM_FILES 10
#To/From Sensor Control
#0->Dont write:
#1->Write to UDP(Not supported):
#2->Write to NVM:
SENSOR_CONTROL 0
#Sensor log NVM setting
SENSOR_NVM_PATH /cache/gps/logs/
#Session log Control
#0->Dont write
#1->Write to NVM
SESSION_LOG_CONTROL 0
#Session log NVM setting
SESSION_LOG_NVM_PATH /cache/gps/logs/
6. Now, DO A FACTORY RESET. AND PLS DO NOT DISABLE ANY DOCOMO APPS. Use the phone for couple of days and if it's stable, start disabling docomo apps.
Please do let me know if it helped.
Note: still you might see a reboot, as I had seen two reboots in last three days. Found the cause, fixed it and device is under test again Let's hope no more reboots on this device.
PS: I hate this device so much, if it reboots again I will throw it out of the window.
How can some one release a device without proper verification ? a docomo user might face same issues while in international roaming !
Thank you
Thank you very much!. I will try these steps you explain but I guess I'm going to buy another mobile because it's not very useful to have a phone which cannot get Android updates and cannot use 3G data without rebooting.
I'm planning to buy a Moto G which is made by Google and they say that Android 4.4 update is sure at the beginning of 2014. And it's cheap and has good specifications
I also had problems of not being able to use 3g data without rebooting. These steps would solve it too don't disable any DoCoMo apps.
But software update is a real prob..
Sent from my F-02E using xda app-developers app
I quit. No further wasting of time n energy.
Rebooted many times today, reboot happens while searching for network.
Am selling the phone now. Will go for Google device.
Sent from my F-02E using xda app-developers app
New Software Update V19R50D?
Hello,
I've seen there's a new nttdocomo software update compilation (V19R50D) and I've read somewhere this update solves rebooting (I read it on a japanese page translated thanks to Microsoft Bing Translator ).
Do you know if there's any way to update software without nttdocomo SIM and outside of Japan?. I've searched but I haven't find any way :crying:
Anyway, I'll buy a new Google device too because my F-02E, although there's a nice device with great specs, it's unuseful if you cannot call without restarting or surfe the web with at least 3G data.
Thanks!
biswaranjan said:
I quit. No further wasting of time n energy.
Rebooted many times today, reboot happens while searching for network.
Am selling the phone now. Will go for Google device.
Sent from my F-02E using xda app-developers app
Click to expand...
Click to collapse
I had tried vpns and Sim location manipulators but did not work hope some one posts a solution.
Sent from my F-02E using xda app-developers app
Related
Ok all here is my problem and I know there many more suffering from this:
Connecting to the internet from my Hero works fine on 2G (GPRS) and Wi-Fi, but is very unstable on 3G (UMTS) and H (HSDPA).
By starting a thread, I want to get to an answer as to WHY this is happening and hopefully find a solution
My problem started around the time I started using custom 2.1 (or radio) ROMs, but I am not sure whether flashing those is actually the cause. I have a SIM unlocked Hero and an unlimited data plan with T-Mobile Netherlands (called Web 'n' Walk Plus @ 1 Mbit/s down, 384 Kbit/s up). I had no problem on the stock 1.5 ROM/radio.
Symptoms:
Whenever an app is making a server request, the 3G icon starts blinking the up arrow, shortly followed by the H icon blinking the up arrow, indicating the request is made.
When all is well, the response is received and communication is quick and smooth. Most of the time though, the phone continues making requests but no response is received and the application reports a network error/timeout. This happens while signal strength is max (4 bars).
Ping test:
Enter *#*#INFO#*#* in the phone dialpad and select Phone Information, press the "Run ping test" button.
- The line "Ping IpAddr" reports: "Fail: IP addr not reachable";
- The line "Ping Hostname(www.google.com)" reports: "Fail: Host unreachable";
- The line "HTTP Client test" reports: "Fail: IOException".
The preferred network type is "WCDMA preferred", as set in the lower part of the same screen.
Note: WCDMA is an air interface standard used for UMTS and the like and is not related to CDMA, which is the mobile access technology used in the USA as opposed to GSM, which is used everywhere else in the world.
The thing is though, that the connection does not seem to fall back to 2G but rather experiences a timeout.
FWIW: the Phone Information screen reports a signal strength of -dBm, 25 asu.
Tried:
- Flashing various ROMs to spot any difference, none found.
- Flashing newer radio ROM (JU instead of EU), no luck.
It is here when I first start posting about it:
http://forum.xda-developers.com/showthread.php?p=6099325#post6099325
Other cases that seem to point at the same problem:
http://android.modaco.com/content/h...93937/hero-strange-3g-data-connection-problem
http://forum.xda-developers.com/showthread.php?t=547563
http://forum.xda-developers.com/showthread.php?t=616475
http://support.t-mobile.co.uk/discussions/index?page=forums&topic=8010384abbabde01276d5f3caa005e2d
I hope that anyone experiencing the same post his or her findings, so that we can try to detect a pattern and maybe the solution to this.
UPDATE: Apparent solution for T-Mobile 3G problems:
http://forum.xda-developers.com/showthread.php?t=595108
Fix includes settings as proposed by adwinp below.
Explanation of some settings: http://forum.xda-developers.com/showpost.php?p=5123531&postcount=46
UPDATE 2:
Well, my problems have vanished "as snow in the sun" (old Dutch proverb)!
Applying the latest radio (JU) and the settings as mentioned by adwinp below made my 3G connection fly again, steady and smooth. Thanks adwinp!
How to modify your build.prop file:
1) Connect your handset via USB, make sure USB debugging is enabled
2) From the Android SDK > tools directory, type the following:
Code:
# adb pull /system/build.prop ~/build.prop
3) Open the file with your favorite editor and append the following lines:
Code:
ro.ril.enable.dtm=1
ro.ril.hep=1
ro.ril.hsxpa=2 #for USA, use 1
ro.ril.gprsclass=12 #for USA, use 10
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category = 28
ro.ril.hsupa.category = 7
Save the file. Next:
Code:
# adb remount
# adb push ~/build.prop /system/build.prop
# adb reboot
Some sources claim that a second reboot is necessary, check this for yourself.
Good luck!
UPDATE 3:
Seems my joy was short lived; could be that just rebooting was a temporary fix and a good old placebo effect, since I already experienced connection loss again. Sigh. Anyone else with a good idea?
UPDATE 4:
Could this be an MTU issue, like stated here or here? I'd like to know the methods of changing the MTU for 3G, investigating now.
UPDATE 5:
None of the theories above seem to be plausible. Looks like T-Mobile/Orange is the culprit here. Further reading here: https://t-mobile-forum.pocketinfo.nl/showthread.php?p=725207#last (in dutch)
You have either a
1: physical problem with the handset
2: network problem (check if other ppl within the same network have the same problem)
Try playing with these values in /system/build.prop
ro.ril.enable.dtm = 1 # you might want to disable this one, although it doesn't hurt
ro.ril.hep = 1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category = 28
ro.ril.hsupa.category = 7
# Default network type 0 => WCDMA Preferred.
ro.telephony.default_network = 0
These settings come from my ROM, which has been tested on various networks in Poland, Germany and Mauritius.
3G performance is flawless.
I have been having this very same problem, and I know others have too. it is strange but has only happened since the newer 2.1 builds have been out.
After lengthy conversations with the high technical team at Orange UK they diagnosed my problem as for some reason the phone is trying to connect to two 3g radio towers at the same time (usually should connect to only one) basically this is confusing the phone.
What the fix seems to be is:
- *#*#4636#*#*
- phone options
- ping test (will probably fail)
- change to "GSM ONLY" - for 30 seconds or more NOT LESS!!
- ping test (should succeed)
- then change back to "WCDMA Only" or "preferred"
- ping again (should now work)
If this does not fix it then you have two more options
- take the sim out the phone for 30 seconds (this is the minimum required time to disconnect your phone from the towers your on)
- OR airplane mode for 30 seconds.
Then try the above again and all should be working.
adwinp said:
Try playing with these values in /system/build.prop
Click to expand...
Click to collapse
As a professional software developer, I always get an itch when I am advised to 'try playing', I need to know if something is working or not
ro.ril.enable.dtm = 1 # you might want to disable this one, although it doesn't hurt
ro.ril.hep = 1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category = 28
ro.ril.hsupa.category = 7
# Default network type 0 => WCDMA Preferred.
ro.telephony.default_network = 0
Click to expand...
Click to collapse
Do you have any reference information for these settings? I'll try to look it up myself but I can't fiddle with them unless I know what the possible values are and at least know what each setting is used for
Lennyuk said:
After lengthy conversations with the high technical team at Orange UK they diagnosed my problem as for some reason the phone is trying to connect to two 3g radio towers at the same time (usually should connect to only one) basically this is confusing the phone.
Click to expand...
Click to collapse
Interesting reason; you think this could be related to the fact that the latest VillainROMs stem from CDMA ROMs? What I still don't get is that speech and GPRS traffic are unaffected, these just work.
I already tried your fixes several times but for me they don't work everytime. Ah well, hopefully the official 2.1 update does some good here
j0bro said:
Interesting reason; you think this could be related to the fact that the latest VillainROMs stem from CDMA ROMs? What I still don't get is that speech and GPRS traffic are unaffected, these just work.
I already tried your fixes several times but for me they don't work everytime. Ah well, hopefully the official 2.1 update does some good here
Click to expand...
Click to collapse
Possibly however my problems first seemed to start after the Legend based roms.
j0bro said:
Interesting reason; you think this could be related to the fact that the latest VillainROMs stem from CDMA ROMs? What I still don't get is that speech and GPRS traffic are unaffected, these just work.
I already tried your fixes several times but for me they don't work everytime. Ah well, hopefully the official 2.1 update does some good here
Click to expand...
Click to collapse
I don't think a CDMA source is the issue here.
I've ported a CDMA to GSM with no problem whatsoever.
You could always try replacing libreference-cdma-sms.so, libreference-ril.so, libril.so and libhtc_ril.so from a GSM ROM.
Im also on T-mobile NL with unlimited web n walk
i dont have that issue, and i am currently on aHero 0.7 with latest radio,
also havent encountered the problem on other 2.1 roms
i hope this is some additional information
I always run into this problem as well on all of the 2.1 ROMS pretty much. I'm on the 3 network in the UK. Basically I never had this problem with any of the modaco 1.5 ROMS.
Awesome. Thankyou!
This has fixed my annoying 3G issues, Exactly as you describe.
What exactly is the solution?
Update 2 - First post.
Previously browsing maps would stall and the "up" arrow be stuck on, with the "down" one empty. I say maps, but anything really that uses the data connection. Most often going into Airplane mode and back again fixed it. Now it just works, and quickly too.
BTW - I'm on orange UK.
ChrisCoooo said:
Update 2 - First post.
Previously browsing maps would stall and the "up" arrow be stuck on, with the "down" one empty. I say maps, but anything really that uses the data connection. Most often going into Airplane mode and back again fixed it. Now it just works, and quickly too.
BTW - I'm on orange UK.
Click to expand...
Click to collapse
So just adb those values into the build.prop file and now everything is fine?
Yep. Thats basically all I did, I did a remount, pulled the build prob to my local, edited it, then pushed it back.
First reboot then I had connectivity, but the status bar showed it not being registered on the network. Second reboot and it was all good. A consitent 3G/H signal and no stalling of data transfers.
ChrisCoooo said:
Yep. Thats basically all I did, I did a remount, pulled the build prob to my local, edited it, then pushed it back.
First reboot then I had connectivity, but the status bar showed it not being registered on the network. Second reboot and it was all good. A consitent 3G/H signal and no stalling of data transfers.
Click to expand...
Click to collapse
I edited my OP, since I experienced connection loss again. How is it holding up for you?
Great topic J0bro.
I am having exactly the same problems as you describe. I was just searching the web since at first i couldn't find anything usefull here. I just went back to see if there were some new rom updates and i saw this topic.
I am now running villain 5.2 and latest radio. I was already experiencing the same probs a while back but not as much as i am now. It seems that when I try to open an app on the market i get a lot of connection errors. The switching between the 3g and H takes too long and times out.
I now have a stream running on stream live radio and that uses my H connection. Once it is continuously using H it seems just fine......
Strike that italic part.... When i was typing that it disconnected went back to 3G and lost connection. Now its switching back and forth between 3G and H
Damn this sucks man. I will try the part of of the build.prop....
Pff and i just got my debricked hero back
FYI I am on t-mobile NL with web n walk plus
Did you try replacing the ril libs I mentioned in /system/lib ?
Did you test this in another city?
adwinp said:
Did you try replacing the ril libs I mentioned in /system/lib ?
Did you test this in another city?
Click to expand...
Click to collapse
Just put it underneath the rest in the build.prop and rebooted twice.
Did I do that right?
Hi there which 2.1 Rom did u try?
On tmobile UK and had same 3g problem with stock rom but its fixed now. Only been testing with villainroms. Version 3.4 and 5 beta2 works perfect, the legend based one doesn't work and has same 3g problems. So its probrqbly not universal across 2.1 roms
Re: [2.1 ROMs] Unstable 3G/H connection but 2G and Wi-Fi are fine
i'm on villain 5.2
Sent from my Hero using the XDA mobile application powered by Tapatalk
I have a Passion v10 in my SGS Vibrant.
My problem rigth now it is the GPS. I have my GPS ON and i got signal in Google maps, but only in this app. If i try my GPS app (NDrive) it say NO GPS, if i try a test with GPS Test i have GPS ON but i dont have any signal, if i test with AngryGPS i have a time out (same as NO GPS )
These are my settings with AngryGPS:
Test mode: S/W Test
Operation Mode: MSBased
Start mode: Hot start
XTRA: ON
GPS Logging: ON
Time out(s): 225
Accuracy: 50
Server FQDN: Custom Config
Server: supl.google.com
Server port: 7276
Server type: UMTS SLP
SUPL Secure socket: OFF
AGPS Mode: SUPL
SSL Type: VerSing
Can i do something else?
I have the correct configuration?
Someone have problems like this?
I really appreciate any help.
Best Regards!,
Waldos.
it is probably WIFI location not GPS that's why its working in maps. To get GPS working try this:
1. download GPS Status from market
2. open it then goto Menu > Tools > Manage A-GPS State
3. Click Reset
4. Reboot
5. open GPS Status and go back to the same menu and click Download
After doing this you should immediately see about 10-14 satellites and within a few seconds get a lock. Then open maps or any other software.
hi syl0n, thx for your help.
I did what you tell me and i did not get a bigger difference. I think it is not related with the settings.
The only i can say you is that i only have access to the GPS the first seconds of the startup. If i try to open a GPS app after the first seconds i can catch any gps signal.
This is a problem with the phone?
ICS is good with GPS?
There will be a fix for this problem?
Thanks for your great support!
Best regards,
Waldos.
Edit:
Finally i got a near perfect GPS. I concluded that i have only the first minutes to start the GPS process, after that i can not get the GPS function.
If you need my steps to get the GPS, they are here.
First al all delete the GPS configuration, to make a fresh and clean signal:
Go to angryGPS and press Delete GPS Data
The we can start the configuration of the GPS with the same app (angryGPS )
General Settings
Test mode: S/W Test
Operation Mode: MSBased
Start mode: Cold start
XTRA: ON
GPS Logging: ON
Time out(s): 225
Accuracy: 50
SUPL Settings
Server FQDN: Custom Config
Server: supl.google.com
Server port: 7276
Server type: UMTS SLP
SUPL Secure socket: OFF
AGPS Mode: SUPL
SSL Type: VerSing
Then we continue the configuration with FasterFix :
You have to put your continent.
If you live in US you have to select North-America.
If you live in Spain you have to put Europe.
Finally put it on your first screen a shortcut of AngryGPS (a fast shortcut)
Now you have to shut-down your phone, go outside and start your phone.
You have the first minutes to start the GPS process, so start the AngryGPS, select Lock-on-Satellite Test, select GPS Start, and wait some minutes. When the first cycle ends (225 sec) you finally have the location of your position.
Now you can change the angryGPS configuration for a faster GPS.
Go to AngryGPS and change the next option:
Start mode: Hot start
And thats all! If you have more problems. I have a bulletproof configuration. Just Ask me.
Someone with GPS problems can try this solution?
Thx for this great forum!
HW fix
Waldos said:
Someone with GPS problems can try this solution?
Thx for this great forum!
Click to expand...
Click to collapse
Have you even taken the phone apart yet, and done the HW Mod yet, Its a well known fact that T-959's have ****ty contact with the GPS antenna, and as such, there is no SW configuration that will achieve any signal strong enough to make it work, until the HW mod is performed, which afterwards you will see significantly improved signal, and therefore the next step would be in deciding which SW works the best based on the flavor of ROM your using, I myself am using the script that came with V10 and am getting excellent results, with lock within 30 sec's or less and down to 13ft. But of course I did the HW MOD, I slipped some plastic under the tabs for both my GPS and WIFI to ensure excellent contact pressure, ensuring strong signals. Otherwise before I did the MOD for GPS, there wasn't hardly any signal and I was lucky to achieve lock at all!!
If you havent improved the contact pressure, you need to do that before screwing around with the SW. Otherwise your chasing your tail in circles!
Hi dseldown,
Thanks for your excellent and detail solution. I test your solution when i will not have any sinal , but for the moment i do not want to open my phone because yesterday i did some test and the GPS is near perfect. The only think i do (after all the above configuration) is reboot the phone and when the phone starts i open AngryGPS and start a Lock-on-Satellite Test, after 30 seconds i have 9~10 birds.
You have take in mind that you have to configure your phone before you GPS works.
Another note it is that not always your icon of GPS has to blink. Sometimes only appears.
Final note: I know that i have my GPS working because i have my WiFi Off and i am on only 2G.
After I did the HW fix I actually had to remove angry GPS to get good locks.
Might be a fluke.
ElectricMenace said:
After I did the HW fix I actually had to remove angry GPS to get good locks.
Might be a fluke.
Click to expand...
Click to collapse
Maybe but i dont know.
There are a detail tutorial to make this fix? or video?
I will try this solution in some weeks.
Waldos said:
Maybe but i dont know.
There are a detail tutorial to make this fix? or video?
I will try this solution in some weeks.
Click to expand...
Click to collapse
Yes search Hardware fix GPS Vibrant. There is also a youtube.
it is really really simple. The forum post says solder but what you can do is cut a tiny piece of 12 gauge (really tiny) and just put it in between contacts. I got signal lock in my basement which is retarded lucky but still happened.
Ok i will do a research about this topic.
And i put my comments in this same threat.
I have to add another note:
Yesterday and today i only have GPS signal before 2 reboots. I do not know why but i have a strong signal I hope have a better signal before do a Hardware fix.
What is the MMI code to delete the gps settings.... does not seem to work like it did on froyo/etc..... angry gps seems to do nothing for me. On V11 neobuddys passion.
s15274n said:
What is the MMI code to delete the gps settings.... does not seem to work like it did on froyo/etc..... angry gps seems to do nothing for me. On V11 neobuddys passion.
Click to expand...
Click to collapse
*#*#1472365#*#*
Woodrube said:
*#*#1472365#*#*
Click to expand...
Click to collapse
Also not working. Thanks though.
On the Rezound the location services target-symbol icon is always present in two states. An OFF state where only the main target symbol is showing, and an ON state having an additional pair of lines to its right hand side.
I have been on 4.03.605.2 Update since August with no issues, except two days ago I cancelled Verizon and have been using the phone with a T-Mobile SIM. Again all is working flawlessly (including data, phone, and texts) except the GPS started to fail within 10min of navigation. It fails because somehow the entire location service crashes (the target icon disappears completely), at which point fiddling with settings or AGPS cache and such is irrelevant. Only a phone reboot restarts the service.
(before cancelling Verizon, I was able to drive 1700 miles across country having the GPS fully functional for 8-12 hours at a time daily with no hitches. So there is something new amiss here. Also, I have already wiped the phone and reinstalled the 4.03.605.2 clean from scratch and re-rooted).
->My question is, does anyone know which specific apk is responsible for the location services (including the taskbar symbol) and can it be hot restarted by itself, or what could possible be causing it to crash in the first place ?
If you wanted you could try a new ROM or you could try a factory reset.
Sent from my ADR6425LVW using xda app-developers app
ThomasAn said:
In HTC devices (that I know of) the location services target-symbol icon is always present in two states. An OFF state where only the main target symbol is showing, and an ON state having an additional pair of lines to its right hand side.
I have been on 4.03.605.2 Update since August with no issues, except two days ago I cancelled Verizon and have been using the phone with a T-Mobile SIM. Again all is working flawlessly (including data, phone, and texts) except the GPS started to fail within 10min of navigation. It fails because somehow the entire location service crashes (the target icon disappears completely), at which point fiddling with settings or AGPS cache and such is irrelevant. Only a phone reboot restarts the service.
(before cancelling Verizon, I was able to drive 1700 miles across country having the GPS fully functional for 8-12 hours at a time daily with no hitches. So there is something new amiss here. Also, I have already wiped the phone and reinstalled the 4.03.605.2 clean from scratch and re-rooted).
->My question is, does anyone know which specific apk is responsible for the location services (including the taskbar symbol) and can it be hot restarted by itself, or what could possible be causing it to crash in the first place ?
Click to expand...
Click to collapse
the location icon is stored in framework-res.apk and comes active by the framework.jar and services.jar i know there is a patch floating around that will give the GPS a more accurate location reading with updated north america stats. you can try to find this and run it to see if it patches the problem. i have never heard of this before.
synisterwolf said:
the location icon is stored in framework-res.apk and comes active by the framework.jar and services.jar i know there is a patch floating around that will give the GPS a more accurate location reading with updated north america stats. you can try to find this and run it to see if it patches the problem. i have never heard of this before.
Click to expand...
Click to collapse
I am afraid, the the gps.conf tweak is not helping in my case (tried it). For the lack of better explanation, it is as if the gps driver/daemon crashes (to borrow a windows term) and I can play with the settings and checkboxes all day, it will not come back online until a reboot.
To give you an idea of the symptoms.
For up to 10-15 min it works flawlessly, locking within 2secs, seeing 20 satellites and tracking 10-14 of them. Then within a few turns of GPS navigation the location services icon disappears, the gps icon starts blinking and GPStest screen goes blank with 0 in sight and 0 tracking. No amount of check-box fiddling in settings, or AGPS cache clearing recovers it until reboot.
Uninstalled gMaps, and tried a few other packages as well (CoPilot, Maverick, OsmAnd) makes no difference.
Even without any Nav software running ... just launching the GPStest app and leaving it on with the screen on, it will go for an hour or so before jamming. So GPStest goes for an hour and Nav apps go for 10-15min ... should I assume some kind of GPS buffer overflows and crashes the location service ?
SOLVED.
For some reason the Rezound needs to be either in Global or CDMA mode for the GPS to work indefinitely without fail.
When I put it on GSM / UMTS the GPS only lasts for an hour or so before failing and requiring phone reboot.
In GSM mode it fails within 5-10 min.
In CDMA mode it works perfectly even though it gets no signal due to the GSM SIM inside.
(Keep in mind I use the phone with a GSM SIM)
In summary, keeping the phone in CDMA or Global mode fixes the issue. I also added these lines in the gps.conf for the heck of it (but I really do not think they do anything. I can still get it to fail by switching modes)
PHONE_TYPE=Global
PHONE_TYPE=CDMA
PHONE_TYPE=GSM / UMTS
PHONE_TYPE=GSM
PHONE_TYPE=UMTS
ThomasAn said:
SOLVED.
For some reason the Rezound needs to be either in Global or CDMA mode for the GPS to work indefinitely without fail.
When I put it on GSM / UMTS the GPS only lasts for an hour or so before failing and requiring phone reboot.
In GSM mode it fails within 5-10 min.
In CDMA mode it works perfectly even though it gets no signal due to the GSM SIM inside.
(Keep in mind I use the phone with a GSM SIM)
In summary, keeping the phone in CDMA or Global mode fixes the issue. I also added these lines in the gps.conf for the heck of it (but I really do not think they do anything. I can still get it to fail by switching modes)
PHONE_TYPE=Global
PHONE_TYPE=CDMA
PHONE_TYPE=GSM / UMTS
PHONE_TYPE=GSM
PHONE_TYPE=UMTS
Click to expand...
Click to collapse
Have you tried cm9 yet. Option for GSM and cdma on the same line might help.
Sent from my iPhone...
synisterwolf said:
Have you tried cm9 yet. Option for GSM and cdma on the same line might help.
Click to expand...
Click to collapse
That option on CM9 is the descriptive form of the "Global mode" in the HTC RUU under the hood.
My next step is to understand why the network modes affect the Rezound GPS like this.
Anyone knows if there an HTC doc that describes the official GPS APIs, or at least how to properly construct a gps.conf file with settings that the Rezound actually understands ?
ThomasAn said:
My next step is to understand why the network modes affect the Rezound GPS like this.
Click to expand...
Click to collapse
Did some more searching on this and so far I begin to suspect the possibility that the Rezound is deliberately GPS-locked to the CDMA network by Verizon. (Unlike my earlier claim, the global mode does fail eventually. It just takes a while longer).
I am not happy with this but so far the only workaround is to switch to CDMA while navigating (even if the phone gets no signal due having a GSM sim).
I will keep looking ... and any suggestions are welcome...
The GPS works on the CDMA setting even with the SIM removed completely, (but it fails if set to GSM with no SIM and no data).
I have a p760 and I found gps performance are very bad without agps.
To get an offline fix it took 10+ minutes, in the same conditions my old acer s120 got it in less than 2 minutes.
Carter07 said:
I have a p760 and I found gps performance are very bad without agps.
To get an offline fix it took 10+ minutes, in the same conditions my old acer s120 got it in less than 2 minutes.
Click to expand...
Click to collapse
I have similar problem, fix is slow and not stable, even with agps, using nav aps in car is imposible.
I've installed GPS Status to help fix faster but it didnt helped much.
Any one found a solution for this?
I have the same problem, fix is fast but GPS connection is not stable. Tried install another navigation but doesn't work.
If youre rooted try to install this app FasterGPS
Thanks is much better, but not perfect. Connected with 6-10 satellite have low quality signal(in GPS test ~20 SNR), localization is not ideal. Any ideas ? Sorry for my english
Also, if your rooted, I recommend Pimp My Rom (alpha) from the Play Store. It has lots of useful tweaks, but it also allows you to get the correct GPS config file for your country. As my phone was from Taiwan, it would have the config files for that country and not the UK - where I am. Correct location = Faster connection.
You just get the app then move to the 'Tools' tab then scroll to the bottom, One up from that should be the GPS Configuration, choose your region then country and 'Apply Selected Tweak'. It only takes a few seconds and it makes sure your GPS is configured for your country.
Hopefully this helps out.
I just geve up with fixing GPS, i factory reseted the device, and even uploaded software using "emergency software recovery" from LG tool to try all options, but no success.
Today phone was sent to the service center. Now waiting for the results.
==========================================================
Phone is back from service, and it works now
Fix in less then 10 sec and stable.
Service center replaced back side of the phone (not the battery cover ), there are aerials there i think.
As you might know, our LG G2 is pretty slow when it comes to GPS. The reasons are both software and hardware. Before definitively losing your phone warranty by fixing the contacts on the antenna cover and in the end having the same problems (the software) I strongly recommend try this configuration.
The file to edit is /system/etc/gps.conf
Just edit that file using a root explorer. Remember to read the first line and make the changes according to your country.
Code:
# the time server, replace the "ro"
# with your country code.
# One ntp is all we need.
NTP_SERVER=ro.pool.ntp.org
# the standard data servers
AGPS=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_1=http://xtra3.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra4.gpsonextra.net/xtra.bin
# enable the agps parsing
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_USER_PLANE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# the modem capabilities, using 3G,
# using Glonass via 3G,
# using standalone LG method
CAPABILITIES=0x37
LPP_PROFILE=0
A_GLONASS_POS_PROTOCOL_SELECT=0x2
LGE_GPS_POSITION_MODE=0
# for super fast preliminary locking without major errors
INTERMEDIATE_POS=1
ACCURACY_THRES=3000
# we declare the quality we need
QOS_ACCURACY=50
QOS_TIME_OUT_AGPS=95
QOS_TIME_OUT_STANDALONE=80
QosVerticalThreshold=500
QosHorizontalThreshold=1000
# better and faster aGPS
AssistMethodType=1
AgpsUse=1
AgpsServerType=1
AgpsServerIp=3232235555
AgpsMtConf=0
AgpsMtResponseType=1
# we replace the not working supl.google.com
# with the more geo-friendly nokia
SUPL_HOST=supl.nokia.com
SUPL_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=supl.nokia.com
SUPL_SECURE_PORT=7275
SUPL_TLS_CERT=/etc/SuplRootCert
REPORT_POSITION_USE_SUPL_REFLOC=1
#indoor
QUIPC_ENABLED=1
# NMEA provider
NMEA_PROVIDER=1
#general
PHONE_TYPE=UMTS
CURRENT_CARRIER=common
For those having problems editing gps.conf, I have attached my own. Just replace the "ro" (Romania) in the first 2 lines of the file with your country code.
i used to have those problems until change my sim card, with my old sim card it take a long time to lock GPS and then it loose the signal constantly, but after change the sim card, it have a perfect lock time and a perfect signal accuracy
With 5.0.2 I get a lock within 10 seconds with an accuracy of 3 meters. Pretty good, I'd say.
robogo1982 said:
With 5.0.2 I get a lock within 10 seconds with an accuracy of 3 meters. Pretty good, I'd say.
Click to expand...
Click to collapse
I ususally get in 1sec with accuracy of 10meters Ls-980
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
I am going to try it thanks for sharing
Thanks! I will test too, just add in my gps.conf?
Envoyé de mon LG-D802 en utilisant Tapatalk
Thanks working very good! Fast and furious
Thanks working very good for me
thanks man, works great !! Better than original gps.conf :good:
Do you replace your current file with this one?
Sent from my LG-D802 using XDA Free mobile app
Stuart5851 said:
Do you replace your current file with this one?
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
I created new gps.conf by coping the text from the code in op and changed my country code, also there is gps.conf attached in op for reference
sameerm02 said:
I created new gps.conf by coping the text from the code in op and changed my country code, also there is gps.conf attached in op for reference
Click to expand...
Click to collapse
I copied the above file and it overrides the existing one, out of interest the locations icon does not appear even when GPS is connected!
Sent from my LG-D802 using XDA Free mobile app
Why don't you just use fastergps from playstore for the?
I personally prefer least apps installed as possible so I'll edit gps.conf.
Thanks! This helped for sure! GPS icon used to take 5 mins to light up, now its 5 seconds, but even then it's losing me occasionally.
The gps on this phone is one of the few weak links on this phone and it can still be frustrating, but at least it's less frustrating haha
you think ima flash this man? you trying to track me all day lonn are you? freakin perv no way
rancur3p1c said:
you think ima flash this man? you trying to track me all day lonn are you? freakin perv no way
Click to expand...
Click to collapse
Please explain. I don't get what you are trying to say...
straylight23 said:
Please explain. I don't get what you are trying to say...
Click to expand...
Click to collapse
sorry, I was just trying to be funny
My problem is that when I get the AGPS data, the positions of the Satilites in GPS Test are not same with the other guy who stands next to me and already has 3D fix. For example, on the other guy's phone, GPS Test shows that Sat #23 is at the center, while on my phone it's at some place far from the center. Thus, GPS Test shows 20+ satilites in view, but usualy 0~1 in use. However, when I clean up AGPS data and let the phone search for sat signal, it could usually find more than 6 at the same position.
Any idea on why this happens?
coolcfan said:
My problem is that when I get the AGPS data, the positions of the Satilites in GPS Test are not same with the other guy who stands next to me and already has 3D fix. For example, on the other guy's phone, GPS Test shows that Sat #23 is at the center, while on my phone it's at some place far from the center. Thus, GPS Test shows 20+ satilites in view, but usualy 0~1 in use. However, when I clean up AGPS data and let the phone search for sat signal, it could usually find more than 6 at the same position.
Any idea on why this happens?
Click to expand...
Click to collapse
I wonder if you're on to something. My GPS, yet again, threw me under the bus today. Google Maps showed a fix within once city block while I drove for an hour, following the nav. Suddenly it shows me 20 minutes past my destination lol
Anyway, I know this has nothing to do with the OP except that this is what he was trying to fix. (Pun intended). But I am left wondering if these settings are telling the phone to "trust" the same GPS fix more instead of help the GPS actually get a more accurate fix?
=JKT= said:
I wonder if you're on to something. My GPS, yet again, threw me under the bus today. Google Maps showed a fix within once city block while I drove for an hour, following the nav. Suddenly it shows me 20 minutes past my destination lol
Anyway, I know this has nothing to do with the OP except that this is what he was trying to fix. (Pun intended). But I am left wondering if these settings are telling the phone to "trust" the same GPS fix more instead of help the GPS actually get a more accurate fix?
Click to expand...
Click to collapse
Well my problem is driving me crazy, as I'm playing Ingress.
Firstly, if you use GPS Test, or GPS Status, you can see a "satellite map" showing the position of satellites on the sky. My problem here is that the map on my phone looks very different with other's, when I get no fix while he gets 3D fix. This should have something to do with how the phone uses the AGPS data.
Secondly, my phone often loses all satellites suddenly. I can understand it if I walk from a place with clear & open sky view into a forest of tall building, but actually it doesn't behave in that way ---- it's opposite!! The phone can keep 3D fix even when there are a lot of 30+ floor building around, but it can also lose GPS lock when I walk along a street with open sky. When this happens, I usually open GPS Test, and see a satellite map that is different with the one when I have 3D fix.