Greetings, I have been following advice on this server, and have managed to try a few different roms. I recently s-off'ed my phone thanks to the facepalm method, and I updated my radios to the latest firmware.
After the s-off, I got voice service back through "update profile," but I still had no mobile data. Later voice quit as well, and the drop down menu in any sense based rom always said "Looking for Service."
I tried a ##786# reset. I then did update profile and update prl again. After that failed, I contacted sprint and had them send a refresh signal, but to no avail. After that, they gave me my MSID, and I punched my MSL in and entered the MDN (phone number) along with my MSID.
When I hit commit changes, a popup appeared at the bottom of the screen that said "commit failed" and the phone rebooted as it should after 10 seconds. When the phone came back on, none of the changes had been saved.
I tried this both with the latest vipermod and meanbean. I have tried to flash the basic Sense for EVO 4G LTE rooted rom, but it resets TWRP partway through the install and doesn't boot. I'm looking for advice to fix this and get my MSID and MDN in.
Unlocked S-OFF SuperCID
CID 22222222
Hboot 1.12.0000
Radio 1.12.11.1210
OpenDSP-v31.1.0.45.0015
That happened to me after i S-Off'd. I had to call sprint from the phone and they activated the phone again. It was like it was on purpose. But it worked after. I don't know if that might help at all.
wezzlo115 said:
That happened to me after i S-Off'd. I had to call sprint from the phone and they activated the phone again. It was like it was on purpose. But it worked after. I don't know if that might help at all.
Click to expand...
Click to collapse
Thanks. I tried that the other night. Unfortunately, their refresh signal didn't work, nor did updating profile.
I just installed the most recent rooted stock and tried all the options again ##786# reset, update profile, and finally I manually entered the msid and MDN and got "commit failed" again.
No luck.
That's sooo lame. Try refreshing the signal again? I just remember calling them and this lady was talking so fast I had no clue what she was saying. Then my phone got a profile update and it got fixed.
palehorse864 said:
Thanks. I tried that the other night. Unfortunately, their refresh signal didn't work, nor did updating profile.
I just installed the most recent rooted stock and tried all the options again ##786# reset, update profile, and finally I manually entered the msid and MDN and got "commit failed" again.
No luck.
Click to expand...
Click to collapse
How did you enter the msid and mdn? EPST in guessing?
Sent from my EVO using Tapatalk 2
gunfromsako said:
How did you enter the msid and mdn? EPST in guessing?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I punched my MSL into the dialer with ##.
palehorse864 said:
I punched my MSL into the dialer with ##.
Click to expand...
Click to collapse
Try via ##778# the first menu contains msid and nam settings contains mdn
If that fails try via QPST or dfs
Sent from my EVO using Tapatalk 2
gunfromsako said:
Try via ##778# the first menu contains msid and nam settings contains mdn
If that fails try via QPST or dfs
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Thank you. I will have to try QPST. ##778# didn't do anything on my phone unfortunately.
palehorse864 said:
Thank you. I will have to try QPST. ##778# didn't do anything on my phone unfortunately.
Click to expand...
Click to collapse
i would flash a basic stock with root then try as well. could be a custom rom issue.
palehorse864 said:
Thank you. I will have to try QPST. ##778# didn't do anything on my phone unfortunately.
Click to expand...
Click to collapse
Check your build prop. Make sure ro.build.type = dev
Sent from my EVO using Tapatalk 2
gunfromsako said:
Check your build prop. Make sure ro.build.type = dev
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I tried the build.prop editor and rebooted. I set it from user to dev, but it didn't take.
palehorse864 said:
I tried the build.prop editor and rebooted. I set it from user to dev, but it didn't take.
Click to expand...
Click to collapse
What rom are you on? Also try kernel tuner to edit build prop. I've never had a problem with a change not sticking.
Sent from my EVO using Tapatalk 2
kaos420 said:
i would flash a basic stock with root then try as well. could be a custom rom issue.
Click to expand...
Click to collapse
I get the same issue with the latest rooted stock rom. The earlier ones won't flash though. They reboot the phone partway through the flash.
gunfromsako: I am on the latest stock rooted rom. 3.17.651.4 cl250500
I just set it to dev and rebooted. I still get "commit failed" where is the MDN and MSID located? I have a sneaking suspicion that the file is either not there, and not getting written, or it's set to read only.
palehorse864 said:
I get the same issue with the latest rooted stock rom. The earlier ones won't flash though. They reboot the phone partway through the flash.
gunfromsako: I am on the latest stock rooted rom. 3.17.651.4 cl250500
I just set it to dev and rebooted. I still get "commit failed" where is the MDN and MSID located? I have a sneaking suspicion that the file is either not there, and not getting written, or it's set to read only.
Click to expand...
Click to collapse
They are on the nv partition... I would suggest at this time to use qpst or dfs... Ive never had to mess with those values as they should be automatically programmed OTA
Sent from my Evo 4G LTE using Tapatalk 2
gunfromsako said:
They are on the nv partition... I would suggest at this time to use qpst or dfs... Ive never had to mess with those values as they should be automatically programmed OTA
Sent from my Evo 4G LTE using Tapatalk 2
Click to expand...
Click to collapse
Thank you. I got QPST running. What should I be looking for? I can't find MSID and MDN, but I may just be blind.
Edit: I tried to enter my Directory # and my MSID in IMSI_S. It did not write, and I received a NV_DIR_NUMBER_I[0] NV_FAIL_S error.
palehorse864 said:
Thank you. I got QPST running. What should I be looking for? I can't find MSID and MDN, but I may just be blind.
Edit: I tried to enter my Directory # and my MSID in IMSI_S. It did not write, and I received a NV_DIR_NUMBER_I[0] NV_FAIL_S error.
Click to expand...
Click to collapse
Well you might just have took keep trying with different programs. DFS, cdma workshop, both should work. I'm kinda shooting in the dark here because like I said before I've never had to enter those values. I would suggest running a ruu and trying again in diag mode. And make sure you are connected to the phone and can read/write values.
Sent from my Nexus 7 using Tapatalk 4
Same problem on my Sprint HTC One
I am experiencing the same systematic failure of my Sprint HTC One taking any "commit changes" through EPST after rooting and s-off. Five days of deep forum searches have led me through the same series of actions the OP has taken. I have run through all the obvious EPST resets and attempts to "commit" my MSL and MSID on multiple ROMs, including the stock ROM. In ARHD and stock, I get 4G, but so far I have been completely unable to regain voice or text. There seem to be many fields in my EPST information that are not populated, for instance my Mobile Country Code and Mobile Network Code, but I don't know the corresponding information to populate any of these fields. I can provide more specifics if there is a troubleshooting method that requires it. I am curious, if after this amount of time, has anyone experienced this and solved it? OP? Sprint will continue to tell me that there must be a "cell outage" in my area, which I know is not the case, because I can drive 30 miles into my nearby densely populated city and the problem persists, despite heavy cell coverage.
Related
In order to change my PRL, how would I get into diagnostic mode on a ROM that isn't sense? Dialing ##3424# does nothing, is there another way to get into diag mode or do I have to flash back to a sense rom?
I used qpst w/my nexus s 4g.
*#*#8778#*#*
tailsthecat3 said:
I used qpst w/my nexus s 4g.
*#*#8778#*#*
Click to expand...
Click to collapse
Thanks! When I entered that in, the numbers just cleared themselves, does that mean it's enabled now?
CDMA Workshop still won't let me read my MSL code from my phone... it says "phone does not answer"
There must be something else to do after I enter that number in, right?
No. Means the code didn't work. Which prolly means its not in the epst thats on the phone.
tailsthecat3 said:
No. Means the code didn't work. Which prolly means its not in the epst thats on the phone.
Click to expand...
Click to collapse
Dammit, so I'm going to have to flash back to a sense rom?
Unless you can get the code for the rom youre on...if its there.
You can also try loading a different epst.
tailsthecat3 said:
Unless you can get the code for the rom youre on...if its there.
You can also try loading a different epst.
Click to expand...
Click to collapse
How would I do that?
ShotSkydiver said:
How would I do that?
Click to expand...
Click to collapse
Find them. Put them in /system/app. Fix permissions and for good measure, touch to install. Reboot and see if it works.
There are a bunch here...from the evo4g boards...
http://forum.xda-developers.com/misc.php?do=showattachments&t=696073
tailsthecat3 said:
Find them. Put them in /system/app. Fix permissions and for good measure, touch to install. Reboot and see if it works.
There are a bunch here...from the evo4g boards...
http://forum.xda-developers.com/misc.php?do=showattachments&t=696073
Click to expand...
Click to collapse
That didn't work, I tried a few EPST.apk's and none worked... gonna try flashing a sense rom, thanks.
ShotSkydiver said:
That didn't work, I tried a few EPST.apk's and none worked... gonna try flashing a sense rom, thanks.
Click to expand...
Click to collapse
open terminal on the phone and type
Code:
echo 1 > /dev/qct_diag_enable
Long live echo!
I will say right now, I'm a total noob, and could have possibly picked the WORST device to try flashing from Verizon to Cricket, but I have SCOURED the internet, and the more I read, the more I do with this phone, the more confused I become.
I tried (and failed):
* Loading a custom PRL onto the phone with CDMA Workshop 2.7 (Phone will not load with QRST)
* Changing ANY data in the NAM/CDMA Configuration and have the phone remember
* Seeing if there might be a custom ROM available.
So my question is: WHERE DO I START!?
the1corrupted said:
I will say right now, I'm a total noob, and could have possibly picked the WORST device to try flashing from Verizon to Cricket, but I have SCOURED the internet, and the more I read, the more I do with this phone, the more confused I become.
I tried (and failed):
* Loading a custom PRL onto the phone with CDMA Workshop 2.7 (Phone will not load with QRST)
* Changing ANY data in the NAM/CDMA Configuration and have the phone remember
* Seeing if there might be a custom ROM available.
So my question is: WHERE DO I START!?
Click to expand...
Click to collapse
Well here is the post, that i made and they say it can be done remotely. http://forum.xda-developers.com/showthread.php?p=40669287 read carefully and I myself cant make QRST to even read from phone correctly and I have my msl code...
Sent from my ADR6410LVW using xda premium
24ky said:
Well here is the post, that i made and they say it can be done remotely. http://forum.xda-developers.com/showthread.php?p=40669287 read carefully and I myself cant make QRST to even read from phone correctly and I have my msl code...
Sent from my ADR6410LVW using xda premium
Click to expand...
Click to collapse
Since I've had so much free time with my phone, I actually got the thing flashed.
Between QPST and the right PRL, my Incredible 4G LTE is now capable of utilizing my talk and text. The last thing I have to do is program an APN for the phone, so my question has changed now.
After going under Settings -> Mobile Network -> Access Point Names -> Create New APN
I tried creating a new one but the default APN (VZWINTERNET) remains default and I can't seem to add any new APNs on the phone. I already have the settings for making the APN work, but does anyone know a fix for the phone not remembering new APNs?
the1corrupted said:
Since I've had so much free time with my phone, I actually got the thing flashed.
Between QPST and the right PRL, my Incredible 4G LTE is now capable of utilizing my talk and text. The last thing I have to do is program an APN for the phone, so my question has changed now.
After going under Settings -> Mobile Network -> Access Point Names -> Create New APN
I tried creating a new one but the default APN (VZWINTERNET) remains default and I can't seem to add any new APNs on the phone. I already have the settings for making the APN work, but does anyone know a fix for the phone not remembering new APNs?
Click to expand...
Click to collapse
is your phone rooted, s-offed ect... if so flash viperlte and you can add apns, if youd pm me i can write up a guide for people on how to flash
24ky said:
is your phone rooted, s-offed ect... if so flash viperlte and you can add apns, if youd pm me i can write up a guide for people on how to flash
Click to expand...
Click to collapse
No, and I figured I would have to. So now I'm working on rooting the phone unless you already know how.
So once I have it rooted, it's as simple as rewriting over the default APN?
the1corrupted said:
No, and I figured I would have to. So now I'm working on rooting the phone unless you already know how.
So once I have it rooted, it's as simple as rewriting over the default APN?
Click to expand...
Click to collapse
Yes but install a costom Rom, but backup ur stock first
Sent from my ADR6410LVW using xda premium
24ky said:
Yes but install a costom Rom, but backup ur stock first
Sent from my ADR6410LVW using xda premium
Click to expand...
Click to collapse
Run into a headache trying to get a custom bootloader going so I can kernel root and load the custom rom of choice (Venom LTE)
I tried to download the All-In-One kit from this site, but the link was broken
the1corrupted said:
Run into a headache trying to get a custom bootloader going so I can kernel root and load the custom rom of choice (Venom LTE)
I tried to download the All-In-One kit from this site, but the link was broken
Click to expand...
Click to collapse
Contact hasoon2000 via pm and let him know, but have you used my teams super cid tool or, mdmowers script.
Sent from my ADR6410LVW using xda premium
24ky said:
Contact hasoon2000 via pm and let him know, but have you used my teams super cid tool or, mdmowers script.
Sent from my ADR6410LVW using xda premium
Click to expand...
Click to collapse
So far, just completed this walkthrough: http://forum.xda-developers.com/showthread.php?t=1986346
Fingers crossed it all works and I can load my custom ROM.
EDIT/UPDATE: So I completed the full bootloader unlock! YAY! Now to try and load the Venom ROM. Ideally, everything will work after loading the new ROM.
So it turns out, I still can't root this phone.... I have unlocked the boot loader, but USB Fastboot doesn't appear.
I'd rather edit the post than make new posts. Fixed the damn thing. I can load TWRP recovery, but now I can't seem to get Viper LTE to load right, it keeps the damn stock ROM. I've tried ROM Manager, and now trying GooManager.
Okay, so I was able to not get the Venom LTE like I thought I wanted, so instead I have Cyanogen 10.1, but the problem is, now I either need to...
A: Get the phone into DIAG mode (AKA ##3424)
B: Program settings for the Cricket network
C: Find a Cricket-specific distro of Cyanogenmod.
So random question time: Does the ROM have to be 100% the device I'm trying to alter? I.e. I cannot use an Incredible 2 ROM on an Incredible 4G LTE?
the1corrupted said:
Okay, so I was able to not get the Venom LTE like I thought I wanted, so instead I have Cyanogen 10.1, but the problem is, now I either need to...
A: Get the phone into DIAG mode (AKA ##3424)
B: Program settings for the Cricket network
C: Find a Cricket-specific distro of Cyanogenmod.
So random question time: Does the ROM have to be 100% the device I'm trying to alter? I.e. I cannot use an Incredible 2 ROM on an Incredible 4G LTE?
Click to expand...
Click to collapse
You need stock to flash than flash the romantic you want.
the1corrupted said:
Okay, so I was able to not get the Venom LTE like I thought I wanted, so instead I have Cyanogen 10.1, but the problem is, now I either need to...
A: Get the phone into DIAG mode (AKA ##3424)
B: Program settings for the Cricket network
C: Find a Cricket-specific distro of Cyanogenmod.
So random question time: Does the ROM have to be 100% the device I'm trying to alter? I.e. I cannot use an Incredible 2 ROM on an Incredible 4G LTE?
Click to expand...
Click to collapse
Do not use another device's ROM on this phone!
A) Does *#*#4636#*#* not come up? (EDIT: Fixed typo)
B) Should already be included in CM
C) No such thing
fifiknw87 said:
You need stock to flash than flash the romantic you want.
Click to expand...
Click to collapse
This makes no sense.
You can't do ##3424# in cm10.1
You need a stock Samsung s4 rom
fifiknw87 said:
You can't do ##3424# in cm10.1
You need a stock Samsung s4 rom
Click to expand...
Click to collapse
1) You're clearly artificially inflating your post count so you can post in the dev section (which goes to show that you don't understand the purpose of the dev section)
2) You're wrong.
mdmower said:
Do not use another device's ROM on this phone!
A) Does *#*#3646#*#* not come up? You could try the 5/21 nightly and see if it comes up there.
B) Should already be included in CM
C) No such thing
This makes no sense.
Click to expand...
Click to collapse
Right now, *#*#3646#*#* gets me nothing, and my download from goo.im has been throttled to 4.8 Kbps... I must have offended them. Anyway, I'll give the nightly a try, unless you know of other codes that gets into DIAG mode? Maybe under the developer tools?
the1corrupted said:
Right now, *#*#3646#*#* gets me nothing, and my download from goo.im has been throttled to 4.8 Kbps... I must have offended them. Anyway, I'll give the nightly a try, unless you know of other codes that gets into DIAG mode? Maybe under the developer tools?
Click to expand...
Click to collapse
This app in the Play marketplace seems to work: Secret Phone Settings
Edit: So does this one: Hidden Menus
mdmower said:
This app in the Play marketplace seems to work: Secret Phone Settings
Edit: So does this one: Hidden Menus
Click to expand...
Click to collapse
I don't see an option for DM Command Service, which is what I really need. I need to program my phone with the QPST software like I can with the stock ROM.
Of course, I've already flashed the stock ROM, but when it's obliterated for the NEW ROM, my phone dumps the CDMA settings. Also, where might those be stored? If I do a "dirty flash" to CM10.1, maybe I can keep where I programmed my Mobile Directory Number and all that info?
Also, I've already tried *#*#3424#*#*, *#*#PROGRAM#*#*, *#*#DATA#*#* and nothing seems to go through to get the DM Command Service.
the1corrupted said:
I don't see an option for DM Command Service, which is what I really need. I need to program my phone with the QPST software like I can with the stock ROM.
Of course, I've already flashed the stock ROM, but when it's obliterated for the NEW ROM, my phone dumps the CDMA settings. Also, where might those be stored? If I do a "dirty flash" to CM10.1, maybe I can keep where I programmed my Mobile Directory Number and all that info?
Also, I've already tried *#*#3424#*#*, *#*#PROGRAM#*#*, *#*#DATA#*#* and nothing seems to go through to get the DM Command Service.
Click to expand...
Click to collapse
This seems unnecessary. Have you tried the following in cm-10.1? In build.prop change these lines:
Code:
# Carrier definitions
ro.cdma.home.operator.alpha=Verizon
gsm.sim.operator.alpha=Verizon
gsm.operator.alpha=Verizon
ro.cdma.home.operator.numeric=310012
gsm.sim.operator.numeric=310012
gsm.operator.numeric=310012
# Access to Verizon/HTC apps in Play store
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-verizon
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-verizon
to this:
Code:
# Carrier definitions
ro.cdma.home.operator.alpha=Cricket
gsm.sim.operator.alpha=Cricket
gsm.operator.alpha=Cricket
ro.cdma.home.operator.numeric=310016
gsm.sim.operator.numeric=310016
gsm.operator.numeric=310016
mdmower said:
This seems unnecessary. Have you tried the following in cm-10.1? In build.prop change these lines:
Code:
# Carrier definitions
ro.cdma.home.operator.alpha=Verizon
gsm.sim.operator.alpha=Verizon
gsm.operator.alpha=Verizon
ro.cdma.home.operator.numeric=310012
gsm.sim.operator.numeric=310012
gsm.operator.numeric=310012
# Access to Verizon/HTC apps in Play store
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-verizon
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-verizon
to this:
Code:
# Carrier definitions
ro.cdma.home.operator.alpha=Cricket
gsm.sim.operator.alpha=Cricket
gsm.operator.alpha=Cricket
ro.cdma.home.operator.numeric=310016
gsm.sim.operator.numeric=310016
gsm.operator.numeric=310016
Click to expand...
Click to collapse
So where's my MDN stored? Or is it all inferred from the APN? I don't need to load a PRL?
Keeps coming back with SIM Card Added, reboot to access network. Cricket doesn't use GSM...
Doesn't work. Need to load a PRL onto the phone. When I dial *611, it gives me Verizon Wireless.
the1corrupted said:
So where's my MDN stored? Or is it all inferred from the APN? I don't need to load a PRL?
Keeps coming back with SIM Card Added, reboot to access network. Cricket doesn't use GSM...
Doesn't work. Need to load a PRL onto the phone. When I dial *611, it gives me Verizon Wireless.
Click to expand...
Click to collapse
If you had read the first post of CM, you'd realize that you're just supposed to hit back when "SIM Card Added" comes up. I have successfully used QPST on this phone. See post 5 of this thread.
I take it Cricket is a sim-less CDMA carrier? If this is the case, then build.prop probably isn't sufficient. This is then outside of my realm of knowledge.
Hey guys, I wanted to return my sprint LG G3 to the stock firmware so I flashed the stock zv4 factory .tot using LG flash tool. When the phone turned back on everything went good until I finished the setup. I had no data. No 4g or 3g. I also had none of the sprint apps and had now way to retrieve them. They should automatically download but they didn't. If it helps, in settings > about phone > carrier it says "LG" not sprint.
EDIT: I flashed it again and this time I have data but still no sprint apps.
rangekid15 said:
EDIT: I flashed it again and this time I have data but still no sprint apps.
Click to expand...
Click to collapse
In the dialer, try ##SCRTN#. If that doesn't work, then ##RTN# will. You'll need your msl for the latter one. Get it in post #4 of our Flashtool thread.
Back up your EFS first!! Links to that and everything else are in the stickied FAQ.
engine95 said:
In the dialer, try ##SCRTN#. If that doesn't work, then ##RTN# will. You'll need your msl for the latter one. Get it in post #4 of our Flashtool thread.
Back up your EFS first!! Links to that and everything else are in the stickied FAQ.
Click to expand...
Click to collapse
The "SCRTN" one just basically restarted my phone and reactivated it but it still does not have the sprint zone app, etc and it still says LG in the carrier. I tried the RTN one and pressed "reset default" and it is asking for a "service code"
rangekid15 said:
The "SCRTN" one just basically restarted my phone and reactivated it but it still does not have the sprint zone app, etc and it still says LG in the carrier. I tried the RTN one and pressed "reset default" and it is asking for a "service code"
Click to expand...
Click to collapse
Post #4 in this thread. http://forum.xda-developers.com/showthread.php?p=54912191&postcount=1
That's your MSL
engine95 said:
Post #4 in this thread. http://forum.xda-developers.com/showthread.php?p=54912191&postcount=1
That's your MSL
Click to expand...
Click to collapse
Thank you so much! It reset it to factory settings and installed the sprint apps! You are the man
I have changed my phone to GSM accidentally and now I cannot get LTE service back.
EclipticRez v9, I used the pull down quick settings to turn on Bluetooth but I missed and I turned on/changed to GSM network. Now I cannot change it back. On the quick settings it only has the option to turn on/off GSM. So I went into the hidden phone settings and tried all the various LTE options, it says I'm on LTE in there, but still can't use my phone. It will say 4Glte at the top of the screen but I have no service. If I reboot it goes to GSM in the hidden phone settings.
I tried to remove the GSM option from the quick settings but coredroid stops when I do that and it doesn't stick.
I tried connecting to wifi and sending a text msg and it fails and I get the following error message:
Please add Service Center number in FDN
Is there any way to fix this without having to reflash the ROM? Or if I reflash, can I somehow just pick the network without losing all my info/settings? Backing everything up now in case I have to reflash.
Hmm... these are build.prop settings... if you have the original rom archive, look for the file /system/build.prop and extract it, using root explorer (or your favorite root file manager) over write the existing /system/build.prop file and reboot. Should be GTG.
Always nandroid first, messing in /system could potentially cause... umm... undesirable side effects.
Thanks!
I def have the ROM. I should have a nand from when I flashed it. I was just hoping there was an easy fix so as not to bother.
Do you know why this would have happened? All I had done was hit the GSM on button by accident.
feralicious said:
Thanks!
I def have the ROM. I should have a nand from when I flashed it. I was just hoping there was an easy fix so as not to bother.
Do you know why this would have happened? All I had done was hit the GSM on button by accident.
Click to expand...
Click to collapse
I don't know why, but if I remember right the GSM support in EclipticRez was never finished or didn't work right, but its been a while so I could be wrong.
Sent from my Nexus 4 using Tapatalk
Btw... for the record, replacing the file alone did not work.
I reflashed the ROM and all is good. And though I cannot remove the Network Mode from the quick settings, I was able to move it down to the bottom of the list so I won't hit it accidentally again.
feralicious said:
Btw... for the record, replacing the file alone did not work.
I reflashed the ROM and all is good. And though I cannot remove the Network Mode from the quick settings, I was able to move it down to the bottom of the list so I won't hit it accidentally again.
Click to expand...
Click to collapse
Did you have to wipe and reflash, or just a dirty flash?
acejavelin said:
Did you have to wipe and reflash, or just a dirty flash?
Click to expand...
Click to collapse
I don't know that I had to, but I wiped and reflashed. I always prefer a fresh start if I'm going to do it.
Hi guys,
I flashed Resurrection Remix and it wouldn't start on the first boot. Restored nandroid and got stuck in bootloop, so I went back to stock using the TOT method (ZV4 then let OTA updates get me to ZVC), and I noticed that on my lock screen, it said LG instead of Sprint, and I noticed I had no data. So I tried the 3 dialer codes: ##UPDATE#, ##SCRTN#, and ##RTN#. After this I can now get 3G and it says Sprint on my lockscreen, but no 4g, In settings/mobile networks/network mode LTE/CDMA is selected. In settings/about phone/network, the mobile network type is either EvDo-rev.A or eHRPD(it goes back and forth). I'm wondering if its an APN setting but I can't find anything on this. Any ideas on how I can get 4G back? Thanks for any ideas.
Did you try a profile update? try running 2 of them, then a PRL update, than another profile update. It's pretty picky. [I mean though the System Update tab]
Warboy said:
Did you try a profile update? try running 2 of them, then a PRL update, than another profile update. It's pretty picky. [I mean though the System Update tab]
Click to expand...
Click to collapse
Tried your suggestion but no change, The first profile update took about a minute, and the others went really quick. Still no LTE.
curtvan said:
Tried your suggestion but no change, The first profile update took about a minute, and the others went really quick. Still no LTE.
Click to expand...
Click to collapse
Hmm, Try a reboot and a PRL update than a Profile Update?
curtvan said:
Hi guys,
I flashed Resurrection Remix and it wouldn't start on the first boot. Restored nandroid and got stuck in bootloop, so I went back to stock using the TOT method (ZV4 then let OTA updates get me to ZVC), and I noticed that on my lock screen, it said LG instead of Sprint, and I noticed I had no data. So I tried the 3 dialer codes: ##UPDATE#, ##SCRTN#, and ##RTN#. After this I can now get 3G and it says Sprint on my lockscreen, but no 4g, In settings/mobile networks/network mode LTE/CDMA is selected. In settings/about phone/network, the mobile network type is either EvDo-rev.A or eHRPD(it goes back and forth). I'm wondering if its an APN setting but I can't find anything on this. Any ideas on how I can get 4G back? Thanks for any ideas.
Click to expand...
Click to collapse
what copy of Resurrection Remix you flash?
Warboy said:
Hmm, Try a reboot and a PRL update than a Profile Update?
Click to expand...
Click to collapse
Just tried that, no change.
imerza82 said:
what copy of Resurrection Remix you flash?
Click to expand...
Click to collapse
It was Resurrection Remix 6.0.1 Marshmallow, but it was about a week ago so I'm not sure what version it was, I see it was updated 1/30.
I notice that it has a refresh animation by the signal meter now too. http://i.imgur.com/NqnUNPt.png Thats what made me think it was an APN setting. It does the refresh for about 30 seconds before it can find a signal.
[/COLOR]
curtvan said:
I notice that it has a refresh animation by the signal meter now too. http://i.imgur.com/NqnUNPt.png Thats what made me think it was an APN setting. It does the refresh for about 30 seconds before it can find a signal.
Click to expand...
Click to collapse
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
imerza82 said:
[/COLOR]
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
Click to expand...
Click to collapse
Maybe I will try that this weekend. I'm trying to get it back to stock so I can sell it.
imerza82 said:
[/COLOR]
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
Click to expand...
Click to collapse
Still no luck. Everything working good with Resurrection Remix except data is 3G and not LTE. I also tried flashing some different modems but that didn't change anything. I am thinking there is a partition that doesn't get wiped out during a TOT flash and something is wrong in that area. I am going to try to mess with APN settings when I get time.
curtvan said:
Still no luck. Everything working good with Resurrection Remix except data is 3G and not LTE. I also tried flashing some different modems but that didn't change anything. I am thinking there is a partition that doesn't get wiped out during a TOT flash and something is wrong in that area. I am going to try to mess with APN settings when I get time.
Click to expand...
Click to collapse
This may sound like a stupid question but, do you have a SIM card in?
cipollone88 said:
This may sound like a stupid question but, do you have a SIM card in?
Click to expand...
Click to collapse
Yes SIM card is in. I went back to stock everything again and the 4G problem remains.
curtvan said:
Yes SIM card is in. I went back to stock everything again and the 4G problem remains.
Click to expand...
Click to collapse
Using the ##RTN# dailer code and entering my MSL/SPC code has always got back to a fully functioning stock bloated device when needed. Best of luck to ya!