Hey everyone,
I have R.E.D.D. installed on my 5.0 (yp-g70) US version with CWM kernel. For some reason, everything seems to work, EXCEPT the capacitive buttons, which is obviously annoying when attempting to navigate. Any ideas as to why this is?
kimetime said:
Hey everyone,
I have R.E.D.D. installed on my 5.0 (yp-g70) US version with CWM kernel. For some reason, everything seems to work, EXCEPT the capacitive buttons, which is obviously annoying when attempting to navigate. Any ideas as to why this is?
Click to expand...
Click to collapse
In situations where it is only the capacitive buttons that have a problem. It's always the result of having the wrong kernel. Please check the ROM's thread for special instructions for region ie (US, INT, KOR) and that the ROM is compatible with your region.
Meticulus said:
In situations where it is only the capacitive buttons that have a problem. It's always the result of having the wrong kernel. Please check the ROM's thread for special instructions for region ie (US, INT, KOR) and that the ROM is compatible with your region.
Click to expand...
Click to collapse
Thanks! That was the problem after all, I had flashed the international kernel, not the US.
Related
Hello firstly sorry for my bad English.., I have got YP-G70CB MADE in KOREA BY SAMSUNG (version sawed - back of device) and i have installed Android 2.2 Froyo.
I want another OS (like Android 2.3 Gingerbread)
but problem is I don't know to find corect file to flash succesfully with Odin.
Please help me to find best flash 2.3 gingerbread for my YP-G70CB MADE IN KOREA BY SAMSUNG!
Thanks so much, means a lot for me!
EDIT:
My YPG70CB have flat physical button (i can push it and i hear a sound when its pressed)
GeOrDaNoOo said:
Hello firstly sorry for my bad English.., I have got YP-G70CB MADE in KOREA BY SAMSUNG (version sawed - back of device) and i have installed Android 2.2 Froyo.
I want another OS (like Android 2.3 Gingerbread)
but problem is I don't know to find corect file to flash succesfully with Odin.
Please help me to find best flash 2.3 gingerbread for my YP-G70CB MADE IN KOREA BY SAMSUNG!
Thanks so much, means a lot for me!
EDIT:
My YPG70CB have flat physical button (i can push it and i hear a sound when its pressed)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2192488
If you bought it in Korea, get the Korean ROM. Otherwise the international. XXKPL/KRKPN are the newest.
Mevordel said:
http://forum.xda-developers.com/showthread.php?t=2192488
If you bought it in Korea, get the Korean ROM. Otherwise the international. XXKPL/KRKPN are the newest.
Click to expand...
Click to collapse
My device is bought - ROMANIA but on back of my device appear YP-G70CB
PLEASE LINK EXACTLY,CORRECT ROM TO FLASH MY DEVICe. THANKS,MEANS A LOT FOR ME
GeOrDaNoOo said:
My device is bought - ROMANIA but on back of my device appear YP-G70CB
PLEASE LINK EXACTLY,CORRECT ROM TO FLASH MY DEVICe. THANKS,MEANS A LOT FOR ME
Click to expand...
Click to collapse
http://www.mediafire.com/?r7pft8vcrohsmr3
I can't open my device
I tryed to flash my device with your link, but now my device don't want to open I think its bricked(
GeOrDaNoOo said:
I tryed to flash my device with your link, but now my device don't want to open I think its bricked(
Click to expand...
Click to collapse
Boot into recovery (hold home+volume up+power) and wipe data/factory reset.
Sent from my Galaxy Nexus
Are you sure you want to install GB? Will lose the main functionality: Music Player.
Nothing so far managed to play the Sound Alive present in Froyo.
I could not leave the Froyo until today because of it.
I tried everything suggested. But ...
Good luck I hope you are able to adapt their ears away from the magnificent sound that is only possible in Froyo.
I installed rj's custom kernel for the Galaxy Player 5 international on my samsung galaxy player 5.0 649E-YPG70 A3LYPG70 (after rooting it). The problem with each kernel listed on the page is that the 3 buttons (left, home, back capacitive buttons) do not work. I am not actually sure if my player is the international version or the US version which could be the source of my problem.
Unfortunately i did not backup the original stock kernel.
http://forum.xda-developers.com/showthread.php?t=1414565 on
I tried installing the stock kernel that is listed on the page XXKPF but it wont boot up so i am left with an unusable device. Building my own kernel looks like a huge effort so my device is useless at the moment.
Could somebody send me a backup of the original kernel. I noticed on the forum above that some people already did backups but since i am new member i can't post on the developers forum. Any help would be appreciated thanks
jonathonp said:
I installed rj's custom kernel for the Galaxy Player 5 international on my samsung galaxy player 5.0 649E-YPG70 A3LYPG70 (after rooting it). The problem with each kernel listed on the page is that the 3 buttons (left, home, back capacitive buttons) do not work. I am not actually sure if my player is the international version or the US version which could be the source of my problem.
Unfortunately i did not backup the original stock kernel.
http://forum.xda-developers.com/showthread.php?t=1414565 on
I tried installing the stock kernel that is listed on the page XXKPF but it wont boot up so i am left with an unusable device. Building my own kernel looks like a huge effort so my device is useless at the moment.
Could somebody send me a backup of the original kernel. I noticed on the forum above that some people already did backups but since i am new member i can't post on the developers forum. Any help would be appreciated thanks
Click to expand...
Click to collapse
UPDATE:
I installed http://forum.xda-developers.com/attachment.php?attachmentid=856856&d=1326569537
from here http://forum.xda-developers.com/showthread.php?t=1445840 and my device is now working fine...)
THANKS SO MUCH! This helped me so much! P.S. I like old devices.
HI guys,
Due to an undesired dead of my previous i9100, i'm probably switching to a i9100G, which I'll get borrowed from a friend for a few months. It's 100% the chinese model.
After a bit of checking, I've found that it's not an Exynos model. Does this mean i9100G gets official full CM10.1 support? TI chipsets have all the source available, right?
If I want to install ROMs, any CWM ROM for i9100G will work, right? The ones I can't flash will be official samsung roms for i9100G international, right?
Thank you!
timonoj said:
HI guys,
Due to an undesired dead of my previous i9100, i'm probably switching to a i9100G, which I'll get borrowed from a friend for a few months. It's 100% the chinese model.
After a bit of checking, I've found that it's not an Exynos model. Does this mean i9100G gets official full CM10.1 support? TI chipsets have all the source available, right?
If I want to install ROMs, any CWM ROM for i9100G will work, right? The ones I can't flash will be official samsung roms for i9100G international, right?
Thank you!
Click to expand...
Click to collapse
YES, its TI-Omap processor on that I9100G for u.And all Custom rom's meant for I9100G will wrk on it
This is great news! I couldn't find the official thread for CM10.1 for the i9100g, could you point it for me? I'm mostly interested in a JB vanilla experience, maybe with a modification to allow the camera to store pics in the SD and also allow mass storage, but that would be it. Oh, and stability...I had so many crashes with my i9100 on CM10.1, and camera/3D issues. Do you have any recommendation?
Thanks a lot!
EDIT: Huh, nevermind, now I found the CM10.1 thread. Still, any good vanilla recommendation besides CM10.1?
EDIT2: Another question better to ask to wiser people: I'm going to receive this 9100g running android stock 2.3.x chinese version, how could I change to international JB bootloader?
timonoj said:
This is great news! I couldn't find the official thread for CM10.1 for the i9100g, could you point it for me? I'm mostly interested in a JB vanilla experience, maybe with a modification to allow the camera to store pics in the SD and also allow mass storage, but that would be it. Oh, and stability...I had so many crashes with my i9100 on CM10.1, and camera/3D issues. Do you have any recommendation?
Thanks a lot!
EDIT: Huh, nevermind, now I found the CM10.1 thread. Still, any good vanilla recommendation besides CM10.1?
EDIT2: Another question better to ask to wiser people: I'm going to receive this 9100g running android stock 2.3.x chinese version, how could I change to international JB bootloader?
Click to expand...
Click to collapse
Apart from CM10.1 u have AOKP rom for it and also RootBox rom which is a mix of AOKP + cm10.1 +PA (paranoid Android) for u.
as for as stock JB is concerened u can always find one @ www.sammobile.com
Sun90 said:
Apart from CM10.1 u have AOKP rom for it and also RootBox rom which is a mix of AOKP + cm10.1 +PA (paranoid Android) for u.
as for as stock JB is concerened u can always find one @ www.sammobile.com
Click to expand...
Click to collapse
Thanks for the info! HOwever my concern isn't about finding an international JB ROM. I think there needs to be some kind of previous flash in order to make it work on a 9100G chinese version. Is this correct?
Thank you!
timonoj said:
Thanks for the info! HOwever my concern isn't about finding an international JB ROM. I think there needs to be some kind of previous flash in order to make it work on a 9100G chinese version. Is this correct?
Thank you!
Click to expand...
Click to collapse
previous flash of what
Not sure, that's my concern. I believe you can't just odin your way to international stock JB from a chinese stock ROM, you'll need a way to turn your 9100G international (I guess it's related with some kind of tag string in the bootloader or similar).
timonoj said:
Not sure, that's my concern. I believe you can't just odin your way to international stock JB from a chinese stock ROM, you'll need a way to turn your 9100G international (I guess it's related with some kind of tag string in the bootloader or similar).
Click to expand...
Click to collapse
May be the guide link below on the same would be of some help to u
[GUIDE]Switch between Chinese I9100G & international I9100G SafeWay
YEah, this is what I think I saw last time, I'll ask there! Thanks a lot!
Hi,
Just flashed Pac-Rom 4.3 with venturi kernel v7, and the capacitive buttons (i.e. the Menu/Home/Back buttons - USA version) do not respond at all, they do light up (simply because I touch the screen, not because pressing them, pressing literally doesn't trigger any action, nor does long press).
Any advice?
Make sure you flash the USA version and not the INTL version.
TheKryptonite said:
Make sure you flash the USA version and not the INTL version.
Click to expand...
Click to collapse
I certainly flashed the USA version, I even tried this again.
Hi all,
I have an 8GB YP-G70. It's been rooted - when I first got it, I was going to use Titanium - but then my wife wanted it, so I gave it to her and forgot about it. Now she's got a new phone and I can't find the tools I used to root it or any of my notes, I must have erased the folder.
I know I bought it from Woot. If I recall, it was not actually a US version? Kies says it's got the latest firmware but I'm not sure it checks the firmware if the device is rooted.
It has the hard button for the home key.
I'd like to know what is the latest stock ROM I can use, I want the camera and everything else to work. Any help is appreciated.
It has:
Firmware version
2.2.2
Kernel version 2.6.32.9
[email protected] #1
Build number
FROYO.XXKD6
I believe you have the INTL model.
CM 10.2.
TheKryptonite said:
I believe you have the INTL model.
CM 10.2.
Click to expand...
Click to collapse
Thank you, that was it. I was able to update to 2.3.6 using Odin.
In case someone else gets one and they don't know the difference, the international version has a physical home button and the US version has a capacitive (touchscreen) home button.