[Q] Bootloop on startup after update, root and unlock BL - Sony Xperia P, U, Sola, Go

Hello,
i have a problem.
I have buy yesterday, so i decide immediatly, made update (last version 6.2.1.100), after i use the root tool by doomlord (v15), no problem, and after this step, i try to unlock my BL, no problem with fastboot, after finish, fastboot, say me "okay no problem", but since this reboot, my phone can't pass the first step (animation with the smoke with differents colors).
For poweroff my phone i need make a "hard reset", push on the stop button and vol + (3 vibrates).
I've try to connect my phone in fastboot mode or flashtool mode, but i don't know what i must do after ?
Please find me a solution
Thank you in advance
David
ps : excuse for my poor english

dav999 said:
Hello,
i have a problem.
I have buy yesterday, so i decide immediatly, made update (last version 6.2.1.100), after i use the root tool by doomlord (v15), no problem, and after this step, i try to unlock my BL, no problem with fastboot, after finish, fastboot, say me "okay no problem", but since this reboot, my phone can't pass the first step (animation with the smoke with differents colors).
For poweroff my phone i need make a "hard reset", push on the stop button and vol + (3 vibrates).
I've try to connect my phone in fastboot mode or flashtool mode, but i don't know what i must do after ?
Please find me a solution
Thank you in advance
David
ps : excuse for my poor english
Click to expand...
Click to collapse
What phone is it?
You can try to repair with PC Companion or SUS

ChikeD said:
What phone is it?
You can try to repair with PC Companion or SUS
Click to expand...
Click to collapse
Oh excuse me, it's for Xperia GO, i think i have find the solution, when i go in flashtool mode, my phone after peraps 30sec for waiting, reboot automticaly, so i have thinking "it's impossible for flash it", but i have juste find the tip, just shutdown the phone and retry speedly, after this, flashtool can work.
So for the moment i've just reinstalled the last stock rom, and root, next step try to install the phantom kernel, i think it's good since now.
ps : with PC compagnon, (before reinstalling stock rom with flashtool), the software cannot find the phone (he said me "phone isn't connected")
Thank you for your response.
David

dav999 said:
Oh excuse me, it's for Xperia GO, i think i have find the solution, when i go in flashtool mode, my phone after peraps 30sec for waiting, reboot automticaly, so i have thinking "it's impossible for flash it", but i have juste find the tip, just shutdown the phone and retry speedly, after this, flashtool can work.
So for the moment i've just reinstalled the last stock rom, and root, next step try to install the phantom kernel, i think it's good since now.
ps : with PC compagnon, (before reinstalling stock rom with flashtool), the software cannot find the phone (he said me "phone isn't connected")
Thank you for your response.
David
Click to expand...
Click to collapse
Ah unlocked BL I forgot you cannot update with SUS and PCC will not flash, but it will load the files which you can built the FTF file from with flashtool.
If you have used PCC with the phone before it does not need to recognize it, you can just start repair.

Finnaly it's good, i've a working phone
I can say "ouf" (in french)
Thanks for all
Bye
David

Related

Fota unbrick

Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
it exactly for these files
is compatible with other firmware?
file (Xperia_2011_Range_FreeXperia_ALL.ftf) that function does?, I think that fixes an error
for all xperia range
Please can you explain better for neophytes, as I understand many do not
There´s not much to explain, this .sin and ftf files repair the damage bootloader and the trim area.
If you ´re unable to start phone after a fota update with unlocked bootloader.
Just plug the phone and connect it pressing back button in your xperia neo and press flash on the flashtool. And voila you have you phone live again.
Thanks, now if I understand it, since I have opened the bootloader release your contribution if you ever need it
regards
TNX
It works!!! TY!!!
It´s good to be helpfull man, fota brick is a serious issue. I´m glad to share this. Don´t forget to click on thanks buttom.
Thank you very much for this. It helped me to restore my brothers Neo that got screw-up after unsuccessful FOTA update.
Tried it on my MT15i NEO that got bricked after FOTA yesterday, but doesn't work for me.
I managed to get the 2 files flashed, after, i use wotan to restore latest firmware.
When I try to turn the phone on after this process, only red led flashes 3 times.
SEUS and SE Companion tells me I have software that isn't updatable.
Any other idea's to get my phone back alive?
arn01805 said:
Tried it on my MT15i NEO that got bricked after FOTA yesterday, but doesn't work for me.
I managed to get the 2 files flashed, after, i use wotan to restore latest firmware.
When I try to turn the phone on after this process, only red led flashes 3 times.
SEUS and SE Companion tells me I have software that isn't updatable.
Any other idea's to get my phone back alive?
Click to expand...
Click to collapse
If you flash the files and wotan recognises your phone and flash´t then your phone is ok.
Try to flash´t first with any 2.3.2 stock rom.
Just used wotan to flash 2.3.2 - 3.0.A.2.181 ROM, but problem stays the same.
After pressing the power button, only the led flashes red 3 times and nothing else happens.
Starting in flash programming mode is difficult too(the back button while connecting the USB). I guess 1 time in 50 tries I get a green led and flashing begins, other times it's just a quick red blink and unrecognised USB device.
I can't access the fastboot blue led mode anymore too (holding menu while connecting USB)
Are there some other options that I can try?
Edit:
Finally got it working after leaving the phone alone to the laptop for half an hour.. Phone just started to boot out of itself.. Very slowly.. it stayed on the SE boot logo for about 5 minutes. After restart and upgrade to latest stock with companion; it works okay again.
Thanks for helping me out!
I´m glad your phone is back, try to update it normally now to 2.3.4 and see if the blue lite is back.
Give us here in forum your feedback because this may be helpfull to other users.
I updated to 2.3.4 with SE companion software already and all seems to work okay!
Just tested the blue led/fast boot mode and it works again too.
This is the first and last time i'll do a FOTA upgrade without reading the forum!
Thanks again
testadeferro said:
Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
Click to expand...
Click to collapse
works for me...
This is by far the best tool for all of us.
Great job and THANK YOU for this
My phone is back
P.S.after i use the first tool (loader.sin in my case) i made upgrade on wotanserver with 4.0.2.A.0.42 kernel 2.6.32.9 generic german 2.3.4 (it is only version woking for us)
DO NOT TRY UPDATE WITH PC COMPANION it will brick your phone again (only if you have unlockbootloader)
Thank you for this post! It saved my Neo after I tried the ICS rom...
It worked for me, thanks.
this just recovered a supposedly faulty xperia play off ebay http://www.ebay.co.uk/itm/160753314044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
cheers
hello
i bricked my neo v by flashing a wrong kernel
i downloaded fota unbrick and opened flash tool. it says i should hold the back button while connecting the usb but when i do so the led becomes green. nothing else happens! the phone doesn't turn on, flashtool doesn't recognize it, and the screen doesn't turn on. the led just stays green!
help plz

[Q] Brick lvl:100 !! Help?

Hello XDA members
2 weeks ago i bought a brand new Neo V and fully updated it from SEUS
1 week ago i started reading your forums [facepalm]
Yesterday i followed a series of tutorials on the Neo V Development forum and i managed to brick my phone [facewall!!!]
What i did :
1) Download lots of stuff!!!
a) .42 ftf file from here : http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
b) flashtool from it's original website
c) DoomKernel's rooting script
d) CWM script from here : http://forum.xda-developers.com/showpost.php?p=19733978&postcount=1 (the 1st way)
e) S1tool from here : http://forum.xda-developers.com/showpost.php?p=18013064&postcount=44
2) Use them ALL!!!
a) Install and extract where necessary
b) put .42 in C:\flashtool\firmware
c) put everything else in C:\SETools\ to act tidy
3) Feel like McGuyver!
a) used needle & wire to unlock bootloader with s1tool [success]
4) Take the big step!
a) flash .42 firmware with flashtool [all OK]
phone took it's time to reboot, scared me to death! at least 4 full minutes :/
b) use flashtool to root from the Advanced>Root>ZergRush menu [Fail]
it seems flashtool failed after first part.
c) used DoomKernel's script and rooted phone [all OK]
d) reboot and enjoy! [all OK]
.42 firmware was ok, root ok, boot was slow.. other than that everything worked. (except market, could not download anything!)
e) used Upgrade Service from phone menu and found .62 OTA upgrade. [Failed]
phone downloaded the new firmware, i pressed install, that was it.
And thus my Neo V rebooted to complete the upgrade to .62
The upgrade was never completed, the phone never turned on again.
No SE logo, no led, no nothing!
Everytime i press the power button nothing happens, if i keep it pressed for some time the led flashes green every second.
Everytime i connect it to the PC usb it goes to flash mode on it's own, no back key pressed.
When plugged on charger led flashes green every second.
Last thing i tried was to reflash it (since it went on flashmode) with .42 again.
Nothing there
Still, i would like to see it alive once more since 200 euro for a green led is not really a bargain
Any help appreciated!!
Ok if the pc recognizes it you should be able to resurrect it with pccompanion, seus or wotan client
Sent from my MT11i using Tapatalk
Will try, though phone is not really recognised..
it functions only as when turned off and pressing back button while connecting to pc usb.
EDIT : Installed SEUS again and tried to do an upgrade (only option available through support zone)
Failed first couple of times, then it popped up a new window asking to repair since update is not working.
Asked me phone model and downloading ATM, will report soon
EDIT 2 : Nothing with Pc Companion or SEUS. It reflashed the phone with .62 firmware but the phone is in the same state.
About Wotan Client, i would love to try it but i have no idea how to install it or run it, it asks for credits and i don't think reflashing will help in this case.
wotan flashing is free bro, just download their client and follow steps most probably u will get ur fone back to ur life. best of luck !
Just a thought, the phone acts as if the back button is constantly pressed and i find that VERY weird..
Also, SEUS discovers the phone as "Sony / Sony Ericsson" (?), is it possible that this has to do with the s1tool driver i installed before while unlocking the bootloader?
wow, thats what i call entire history of your phone
anw you experienced OTA brick. because you have unlocked bootloader.
strange, some people get brick some don't, with un-official(s1tool) method.
but with official, everyone get brick.
Madfysh said:
wow, thats what i call entire history of your phone
Click to expand...
Click to collapse
Thanx
I think asking people to help you requires you to help them too so yes, history is all i could do!
Madfysh said:
anw you experienced OTA brick. because you have unlocked bootloader.
Click to expand...
Click to collapse
OTA brick? The tutorials i followed requested me to upgrade with OTA to have .62 with root. Where they wrong?
Dodo_the_Bird said:
Thanx
I think asking people to help you requires you to help them too so yes, history is all i could do!
Click to expand...
Click to collapse
wow, if only more people would br like you
Dodo_the_Bird said:
OTA brick? The tutorials i followed requested me to upgrade with OTA to have .62 with root. Where they wrong?
Click to expand...
Click to collapse
they werent wrong, but if I think on which tutorial you mean, it says its for people with locked bootloader.
now when you have unlocked bl, your life is easier
you can simply use custom kernel which have root included in itself
go to dev section, you can use galaxian or bbooff kernel.
while you are there check sticky threads to see how to flash kernel.
after you read those, ask if you have any question.
---------- Post added at 12:55 AM ---------- Previous post was at 12:52 AM ----------
http://forum.xda-developers.com/showthread.php?t=1496102
http://forum.xda-developers.com/showthread.php?t=1520516
Thank you all SOOOOOO much!!!
Wotan worked, my phone is up and running on .42!!!
So now about tweaking a bit, those kernels support official roms only,
if i wanted to go for something more goodlooking, faster, nicer.. what would you suggest?
No, those kernels arent only for official rom's.
And about custom roms, I'm not the one to talk about it much, as I'm not so much into custom roms dont have enough time to test them.
so you will need to go trough development section and find something you like. remember you can also look in neo section, most of the roms can work on your phone with minor modifications.
also remember, first read then install
So.. i managed to have a working phone and now i am trying to flash galaxian.
i went on cmd, started fastboot with appropriate command and plugged in phone pressing the menu button.
Now in device manager i can see "S1boot Fastboot" and it is not recognised, what am i suppossed to do????
-turn off your phone.
-hold menu key(the right one )
-connect cable
-you should see blue light on led on the side, do you see it?
-go to folder where you have fastboot.exe file
-hold shift key and right-click of mouse anywhere in that folder except on files
-sellect start comandprompt here(or something like that)
- type fastboot devices
-tell if it says something.
Seems like you didn´t install drivers for fastboot...
i thought they are included in adb drivers !?
Well i have installed the whole android sdk with it´s drivers.
As long as it is unrecognized in Windows (no drivers installed) S1Tool has no Chance to detect it
Dodo_the_Bird said:
So.. i managed to have a working phone and now i am trying to flash galaxian.
i went on cmd, started fastboot with appropriate command and plugged in phone pressing the menu button.
Now in device manager i can see "S1boot Fastboot" and it is not recognised, what am i suppossed to do????
Click to expand...
Click to collapse
u havent installed the correct drivers, connect the phone again in fastboot mode, go to device manager, select s1tool fastboot, click update driver, browse for it manually and point it to the the folder in which you have fastboot, done.
Wow! Wotan client can unbrick a phone that bricked with OTA?
Sent from my MT11i using XDA
If you dont want to brick phone with new custom kernel, use ,,hotboot,, function.
That should boot phone with new kernel one time.
If you dont like kernel, just reboot your phone
Sorry for English.
talk about good memory i pity u LoL btw good luck on flashing ur phone and yeah i brick my neo a while back and have to search on google for 6 hrs then fix my neo for half a day thats 12hrs in real life now im happy that im d only in my family tree and clasm8 know how to flash a brick phone hell yeah im proud of it anyways gudluck
Sent from my MT15i using xda premium
soybi said:
Wow! Wotan client can unbrick a phone that bricked with OTA?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Yep
I hit the level 100 brick twice or thrice
Wotan server really helps
I bricked my phone yesterday after doing OTA( bootloader unlocked by testpoint method)...wotan server got it back alive and kicking

Trying to unlock bootloader on x10 mini pro

Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
LostHH said:
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
Click to expand...
Click to collapse
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
SmG67 said:
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
Click to expand...
Click to collapse
I can't seem to enter flash mode :/
I hold the back button and connect the phone to the pc. Initially it installed some flash driver onto the pc and then booted up as normal.
Now it just boots up as normal no matter how long I hold the back button (throughout the whole process so far)
Does having xrecovery have anything to do with this?
Thanks
Edit - my antivirus was quarantining s1tool.exe! derp.
Edit 2 - Success! Thanks chaps. You're all pretty cool in my books
please i need help to enable network on my phone
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
Did you relock the bootloader before you restored stock rom?
please help
SmG67 said:
Did you relock the bootloader before you restored stock rom?
Click to expand...
Click to collapse
yes i relocked the bootloader before i restored to the SE original stock rom...
I still cant get access to the sim network but can see the sim tool kits..pls help me
solotion
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
I have had problem like yours on x10i .
but about solotion:
just flash e15i nAa kernel file to your phone by flash tool before this phone must be rooted.100% worked for me .sorry about my english.:laugh:
Help
Hi,
i don't know if this comes under this section also,
i lost the post that i was using to update my x10 mini pro from 2.1 to 2.3 after my pc freezed and restarted.
So my SE finished the update but it's stuck on the Sony Ericsson text on boot up in faint brightness.
I used flshtool 0.9.0.0
rooted the phone and installed busy box.
restarted the phone with the blue screen menu a selected the NAa kernel from SD to load.
After that rebooted the phone then sony ericsson text came very bright then it starts to faint to minimum and nothing else happens.
If i connect flashtool i will get the following:
02/046/2012 14:46:55 - INFO - Device disconnected
02/047/2012 14:47:16 - INFO - Device connected with USB debugging off
02/047/2012 14:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
02/047/2012 14:47:24 - INFO - Device disconnected
02/047/2012 14:47:26 - INFO - Device connected with USB debugging on
02/047/2012 14:47:27 - INFO - Connected device : U20
02/047/2012 14:47:27 - INFO - Installed version of busybox : BusyBox v1.19.4-cm7 bionic (2012-02-04 22:27 +0100) multi-call binary.
02/047/2012 14:47:27 - INFO - Android version : 2.3.7 / kernel version : 2.6.29
i even tried SEUS but nothing happens it would ask to reboot in flashmode and the device will enter flashmode and nothing happens.
also tried to restart with the blue screen menu by pressing power and the back button multiple times and back with volume + and - nothing occurs.
I downloaded ver 0.9.1.0
and tried the force root and here is the log:
Any solution ?
Thanks in advance.
nabilaj said:
Hi,
i don't know if this comes under this section also,
...
Any solution ?
Thanks in advance.
Click to expand...
Click to collapse
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
stuck on text sony erricson nothing else can be done
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
SmG67 said:
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
Click to expand...
Click to collapse
nabilaj said:
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
Click to expand...
Click to collapse
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
stuck on text sony erricson nothing else can be done
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
SmG67 said:
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
Click to expand...
Click to collapse
nabilaj said:
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
Click to expand...
Click to collapse
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
stuck on text sony erricson nothing else can be done
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
SmG67 said:
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
Click to expand...
Click to collapse
nabilaj said:
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
Click to expand...
Click to collapse
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
stuck on text sony erricson nothing else can be done
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
SmG67 said:
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
Click to expand...
Click to collapse
nabilaj said:
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
Click to expand...
Click to collapse
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
stuck on text sony erricson nothing else can be done
i tried can't feel anymore with my figure of over using it
SmG67 said:
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
Click to expand...
Click to collapse

[HELP]X10 Mini pro completely BRICKED.

Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help

Screen not broken but also not responding to touch because of flashed twrp-recovery, now what?? And especially where to begin with troubleshooting??

Hello everybody,
I have a big problem because my Sony Xperia Z Ultra C6802 doesn't work anymore and doesn't respond to touch anymore since i flashed a certain twrp-recovery to the recovery-partition with fastboot.
So that's why i'm forced to connect my wired mouse to it to be able to control it as far as that's possible. I tried to flash another twrp-recovery to it but fastboot doesn't work anymore and is broken, or so it seems. In any case it's impossible to use fastboot or adb for that matter because the phone wont boot into the bootloader-mode. So could someone please help me with this issue??!! Before i started to hack my phone it worked perfectly and the display responded normally to touch input. The only thing i can do with it at the moment is boot into twrp and the rom which is Lineage-os 18.1. But even when i'm booted into the rom the display still doesn't respond to touch anymore and i still have to use my connected wired mouse to use it.
I hope to hear from you soon about this!
Kind regards,
Laurens
Bump.
[email protected] said:
Hello everybody,
I have a big problem because my Sony Xperia Z Ultra C6802 doesn't work anymore and doesn't respond to touch anymore since i flashed a certain twrp-recovery to the recovery-partition with fastboot.
So that's why i'm forced to connect my wired mouse to it to be able to control it as far as that's possible. I tried to flash another twrp-recovery to it but fastboot doesn't work anymore and is broken, or so it seems. In any case it's impossible to use fastboot or adb for that matter because the phone wont boot into the bootloader-mode. So could someone please help me with this issue??!! Before i started to hack my phone it worked perfectly and the display responded normally to touch input. The only thing i can do with it at the moment is boot into twrp and the rom which is Lineage-os 18.1. But even when i'm booted into the rom the display still doesn't respond to touch anymore and i still have to use my connected wired mouse to use it.
I hope to hear from you soon about this!
Kind regards,
Laurens
Click to expand...
Click to collapse
Bump
It seems your Z ultra is soft bricked. All you have to do is download "Xperia Companion" software
and press "Software Repair", then check the option "My device cannot be detected or started...", then follow the steps provided.
As a result you will have your zultra with a fresh stock rom (Lollipop) from Sony.
Then, you can custom mod your phone again.
EDIT: don't forget to lock your bootloader before running xperia companion!
xda_user749 said:
It seems your Z ultra is soft bricked. All you have to do is download "Xperia Companion" software
and press "Software Repair", then check the option "My device cannot be detected or started...", then follow the steps provided.
As a result you will have your zultra with a fresh stock rom (Lollipop) from Sony.
Then, you can custom mod your phone again.
EDIT: don't forget to lock your bootloader before running xperia companion!
Click to expand...
Click to collapse
Allright!! Thank you so much for responding to my post!! Finally now i can move on and fix my phone again and start all over again!! : D
xda_user749 said:
It seems your Z ultra is soft bricked. All you have to do is download "Xperia Companion" software
and press "Software Repair", then check the option "My device cannot be detected or started...", then follow the steps provided.
As a result you will have your zultra with a fresh stock rom (Lollipop) from Sony.
Then, you can custom mod your phone again.
EDIT: don't forget to lock your bootloader before running xperia companion!
Click to expand...
Click to collapse
I only have one more question: since i can't get access to the bootloader (fastboot), how do i bypass the problem of having to re-lock the bootloader again with (needed) access to the bootloader and fastboot before continuing with Xperia Companion??
Try This:
- Download FlashTool (I'm using version 0.9.30 and it works on my Zultra)
- Extract it to a folder (eg c:\flashtool)
- Go to C:\Flashtool\drivers and install the drivers (FASTBOOT, FLASHMODE and everything with Zultra... )
- Run C:\Flashtool\FlashTool64.exe, and let it update througth github
- Press the BLU botton, follow the instructions on how to connect your phone, then select the model and press Relock
EDIT: The following approach is the flashmode, so you may not have a problem. Please report here if you finally succeed unbricking your phone...
Good luck
xda_user749 said:
Try This:
- Download FlashTool (I'm using version 0.9.30 and it works on my Zultra)
- Extract it to a folder (eg c:\flashtool)
- Go to C:\Flashtool\drivers and install the drivers (FASTBOOT, FLASHMODE and everything with Zultra... )
- Run C:\Flashtool\FlashTool64.exe, and let it update througth github
- Press the BLU botton, follow the instructions on how to connect your phone, then select the model and press Relock
EDIT: The following approach is the flashmode, so you may not have a problem. Please report here if you finally succeed unbricking your phone...
Good luck
Click to expand...
Click to collapse
Could you please upload Flashtool 0.9.30 somewhere and post the downloadlink here in this thread? Because version 0.9.30 is nowhere to be found when i search for it with Google. Only version 0.9.34 is available from the official Flashtool-website, or can i use that one also?
Edit: well first i tried to run Xperia Companion while my phone was unlocked (just to confirm if it works or not) and it didn't gave me any errors, but now it does give me an error saying it can't continu because my phone is locked and i first have to unlock it again before continuing. Do you have any ideas on how to proceed now?
Ps: also my phone is now dead since i locked it again and doesn't respond to anything except it vibrates shortly after pushing the on-button but nothing appears on screen!
Ps1: It appears so that Xperia Companion probably means with "that my phone is locked" that i have a screenlock which i need to unlock first before proceeding.
And yet another thing happened namely: the program complaints about me not having a working internet-connection which doesn't make any sense since every other device in my house has a good working internet connection! I have included a picture of the error below so you can see what i mean.
Eventually it worked!! after successfully relocking the bootloader my phone was completely dead and only vibrated shortly after pressing the power-button and that was it. But since Flashtool reported that the relocking-procedure was successfully fullfilled, i then carried on with Xperia Companion but this time on my Macbook Air (because of the error i got on Windows, see screenshot).
Finally i managed to let it install the original sofware and this time it completely reanimated my phone again, and even my display returned back to normal again!!
So now i can finally begin all over with installing the latest Lineage version onto the phone, thanks to you!!
Ps: before i forget: i found eventually a Flashtool website which has the version you got (0.9.30) so i downloaded that and used it in the process!!
So i can't express enough how much i appreciate your help and can't thank you enough for all of this!!
Glad you could make it!
This is the standard procedure when things go wrong with custom flashing with any xperia device that becomes completely unresponsive.
Two things:
- version 0.9.30 is what I'm currently using. Most likely the newer versions are working as well.
- To unlock your bootloader again, you only have to press the BLU button in Flash Tool and then UNLOCK.

Categories

Resources