Related
I got an Xperia X10i from a friend in school. The only problem it had was that the battery was faulty (We tried a battery from an Xperia Play, worked perfectly top to bottom), so I went a head and bought a new battery. Now the phone will only vibrate and flash a green light. Then nothing, not even the Sony logo. I've to pull the battery out and shove it back it for it to start again. I've tried SEUS, FlashTool, and Repair Phone in PC Companion. They all download the ROM but won't do anything while installing and will eventually say it failed. So my question is, is there anyone else out there who experienced this and how did they fix it? Please help
You might wanna make sure the drivers are properly installed then start flashtool get the .71 baseband and stock gb rom from stickies if i remember well put them in the firmware folder then turn your device off plug it in the pc and quickly hold the back button until a green light shows up and keep holding it start the flashing process and let it do his job flash the rom and the baseband no orders preferred reboot you should have a stock working rom
Sent from my X10i using xda premium
Let me know if it worked out
Sent from my X10i using xda premium
shahkam said:
You might wanna make sure the drivers are properly installed then start flashtool get the .71 baseband and stock gb rom from stickies if i remember well put them in the firmware folder then turn your device off plug it in the pc and quickly hold the back button until a green light shows up and keep holding it start the flashing process and let it do his job flash the rom and the baseband no orders preferred reboot you should have a stock working rom
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I tried that, checked the drivers, working grand and the following log happened in Flashtool:
25/029/2012 15:29:03 - INFO - <- This level is successfully initialized
25/029/2012 15:29:12 - INFO - Preparing files for flashing
25/029/2012 15:29:37 - INFO - Searching Xperia....
25/029/2012 15:29:37 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&3849ADAE&0&4
25/029/2012 15:29:37 - INFO - Start Flashing
25/029/2012 15:29:37 - INFO - VER="R8A013";DATE="20100119";TIME="17:24:00";
25/029/2012 15:29:37 - INFO - Flashing loader
25/030/2012 15:30:43 - INFO -
25/035/2012 15:35:05 - INFO - Flashing kernel.sin
25/036/2012 15:36:20 - ERROR - Error flashing. Aborted
25/036/2012 15:36:20 - INFO - Now unplug the device and power it on
25/036/2012 15:36:20 - INFO - Then go to application settings
25/036/2012 15:36:20 - INFO - turn on Unknown Sources and Debugging
25/037/2012 15:37:09 - INFO - Preparing files for flashing
25/037/2012 15:37:14 - INFO - Searching Xperia....
25/037/2012 15:37:14 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&3849ADAE&0&4
25/037/2012 15:37:14 - INFO - Start Flashing
25/038/2012 15:38:19 - INFO -
25/038/2012 15:38:28 - ERROR - Error flashing. Aborted
25/038/2012 15:38:28 - INFO - Now unplug the device and power it on
25/038/2012 15:38:28 - INFO - Then go to application settings
25/038/2012 15:38:28 - INFO - turn on Unknown Sources and Debugging
I really don't know what to do
Strange, I'm in Ireland too. I've an Vodafone Ireland X10i I bought of a guy the other day and it has the very same problem, it just refuses to take the update from 2.1. I downloaded the Nordic 2.1 ftf file and it sticks at 7% and will not move after that. I've contacted Sony Ericsson support yesterday afternoon and I'm awaiting a reply.
I'm not complaining about buying the phone as I use an Xperia X10 anyway so if it can't be repaired I can use it for spare parts and I didn't pay a lot for the one that's broke.
Dmac98 have you contacted Sony Ericsson support? if not then maybe you should as the more people contact them about this problem the quicker they might get it sorted.
Roger00 said:
Strange, I'm in Ireland too. I've an Vodafone Ireland X10i I bought of a guy the other day and it has the very same problem, it just refuses to take the update from 2.1. I downloaded the Nordic 2.1 ftf file and it sticks at 7% and will not move after that. I've contacted Sony Ericsson support yesterday afternoon and I'm awaiting a reply.
I'm not complaining about buying the phone as I use an Xperia X10 anyway so if it can't be repaired I can use it for spare parts and I didn't pay a lot for the one that's broke.
Dmac98 have you contacted Sony Ericsson support? if not then maybe you should as the more people contact them about this problem the quicker they might get it sorted.
Click to expand...
Click to collapse
I emailed them this morning over it and they said use SEUS, as if I haven't tried that already. I really dont know what to do, I dont want an expensive paper weight teasing me whenever I go into my room
SEUS won't work I've already tried that. I just tried again to update via pc companion and it got to the very end then stopped. I'm gona keep trying, it just has to be fixable lol
Roger00 said:
SEUS won't work I've already tried that. I just tried again to update via pc companion and it got to the very end then stopped. I'm gona keep trying, it just has to be fixable lol
Click to expand...
Click to collapse
Mine doesn't get any progress after download, when you turn your X10 on does it stay on the Bootloader?
It dosent do anything, green led flashes phone vibrates and thats it, screen dosen't do anything
Sent from my X10 using xda premium
So we're in the exact same situation and you're doing better than me. I'm jealous. I've a funny feeling you actually have to have more than 50% (It sounds like more of a suggestion) but it's really hard to charge when it keeps on stopping. This things meant to be impossible lol
yeah I use this phone to charge the battery so its always over 50%. The update gets to about 97% then stops, by hook or by crook I'll get it sorted haha
Sent from my X10 using xda premium
No worries guys here is what you do upgrade to the latest flashtool or downgrade to another version this might sound stupid but it did work for me when i was in a similiar situation
Sent from my X10i using xda premium
shahkam said:
No worries guys here is what you do upgrade to the latest flashtool or downgrade to another version this might sound stupid but it did work for me when i was in a similiar situation
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Tried three different flash tools, still no joy
Roger00 said:
Tried three different flash tools, still no joy
Click to expand...
Click to collapse
ok now this is reallly weird so try the following flash a 2.1 rom instead but before doing that can you confirm bein able to flash anything over flashtool ? Now try this process flash 2.1/2.3 whit correct basebands to do this click flash choose the baseband/rom and it will search for the xperia take off battery off phone and plug in usb mode and quickly insert battery whit back button being holded down i don't see a reason why it shouldn't flash correctly!
Sent from my X10i using xda premium
shahkam said:
ok now this is reallly weird so try the following flash a 2.1 rom instead but before doing that can you confirm bein able to flash anything over flashtool ? Now try this process flash 2.1/2.3 whit correct basebands to do this click flash choose the baseband/rom and it will search for the xperia take off battery off phone and plug in usb mode and quickly insert battery whit back button being holded down i don't see a reason why it shouldn't flash correctly!
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Yeah I can flash ftf only, the phone is recognised in flash mode only.
Here's a log from just now:
25/046/2012 23:46:10 - INFO - Device disconnected
25/048/2012 23:48:31 - INFO - Selected X10i_3.0.1.G.0.75_CUST-UK GENERIC 1235-7379.ftf
25/048/2012 23:48:31 - INFO - Preparing files for flashing
25/049/2012 23:49:07 - INFO - Please connect your device into flashmode.
25/049/2012 23:49:17 - INFO - Device connected in flash mode
25/049/2012 23:49:17 - INFO - Opening device for R/W
25/049/2012 23:49:17 - INFO - Reading device information
25/049/2012 23:49:17 - INFO - Phone reading for flashing.
25/049/2012 23:49:17 - INFO - Start Flashing
25/049/2012 23:49:17 - INFO - Flashing loader
25/049/2012 23:49:21 - INFO - Loader version : R4A024 / Bootloader status : UNROOTABLE
25/049/2012 23:49:21 - INFO - Flashing kernel.sin
25/049/2012 23:49:23 - INFO - Flashing dsp1.sin
25/049/2012 23:49:30 - INFO - Flashing fota1.sin
25/049/2012 23:49:32 - INFO - Flashing fota0.sin
25/049/2012 23:49:33 - INFO - Flashing amss.sin
25/049/2012 23:49:34 - ERROR -
25/049/2012 23:49:34 - ERROR - Error flashing. Aborted
25/049/2012 23:49:34 - INFO - Device connected in flash mode
Here's another with a different ftf file:
25/050/2012 23:50:19 - INFO - <- This level is successfully initialized
25/050/2012 23:50:19 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
25/050/2012 23:50:19 - INFO - You can drag and drop ftf files here to start flashing them
25/050/2012 23:50:20 - INFO - Device disconnected
25/051/2012 23:51:09 - INFO - Selected X10i_2.1.71_ARO.ftf
25/051/2012 23:51:09 - INFO - Preparing files for flashing
25/051/2012 23:51:12 - INFO - Please connect your device into flashmode.
25/051/2012 23:51:22 - INFO - Device connected in flash mode
25/051/2012 23:51:22 - INFO - Opening device for R/W
25/051/2012 23:51:22 - INFO - Reading device information
25/051/2012 23:51:22 - INFO - Phone reading for flashing.
25/051/2012 23:51:22 - INFO - Start Flashing
25/051/2012 23:51:22 - INFO - Flashing loader
25/051/2012 23:51:26 - INFO - Loader version : R4A024 / Bootloader status : UNROOTABLE
25/051/2012 23:51:26 - INFO - Flashing amss_fs.sin
25/051/2012 23:51:26 - INFO - Flashing cache.sin
25/051/2012 23:51:27 - INFO - Flashing fota1.sin
25/051/2012 23:51:28 - INFO - Flashing dsp1.sin
25/051/2012 23:51:32 - ERROR -
25/051/2012 23:51:32 - ERROR - Error flashing. Aborted
25/051/2012 23:51:32 - INFO - Device connected in flash mode
I'm totally baffled at this stage lol
I ran the s1 tool with the phone in Flash Mode:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A013"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1241-6324_2.1.A.0.435
CUSTOM VERSION: 1234-4579_R15B
FILESYSTEM VERSION: VFE-1-4-8_2.1.A.0.435
SERIAL NO: CB511H8XKK
SEMC SIMLOCK CERTIFICATE
Elapsed:19 secs.
You see the phone was like this when I got it, the guy said he tried to update and this happened to it, so I don't even know if debugging and Unknown sources is ticked or not, cosmetically the phone is in as new condition.
Roger00 said:
Yeah I can flash ftf only, the phone is recognised in flash mode only.
Here's a log from just now:
25/046/2012 23:46:10 - INFO - Device disconnected
25/048/2012 23:48:31 - INFO - Selected X10i_3.0.1.G.0.75_CUST-UK GENERIC 1235-7379.ftf
25/048/2012 23:48:31 - INFO - Preparing files for flashing
25/049/2012 23:49:07 - INFO - Please connect your device into flashmode.
25/049/2012 23:49:17 - INFO - Device connected in flash mode
25/049/2012 23:49:17 - INFO - Opening device for R/W
25/049/2012 23:49:17 - INFO - Reading device information
25/049/2012 23:49:17 - INFO - Phone reading for flashing.
25/049/2012 23:49:17 - INFO - Start Flashing
25/049/2012 23:49:17 - INFO - Flashing loader
25/049/2012 23:49:21 - INFO - Loader version : R4A024 / Bootloader status : UNROOTABLE
25/049/2012 23:49:21 - INFO - Flashing kernel.sin
25/049/2012 23:49:23 - INFO - Flashing dsp1.sin
25/049/2012 23:49:30 - INFO - Flashing fota1.sin
25/049/2012 23:49:32 - INFO - Flashing fota0.sin
25/049/2012 23:49:33 - INFO - Flashing amss.sin
25/049/2012 23:49:34 - ERROR -
25/049/2012 23:49:34 - ERROR - Error flashing. Aborted
25/049/2012 23:49:34 - INFO - Device connected in flash mode
Here's another with a different ftf file:
25/050/2012 23:50:19 - INFO - <- This level is successfully initialized
25/050/2012 23:50:19 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
25/050/2012 23:50:19 - INFO - You can drag and drop ftf files here to start flashing them
25/050/2012 23:50:20 - INFO - Device disconnected
25/051/2012 23:51:09 - INFO - Selected X10i_2.1.71_ARO.ftf
25/051/2012 23:51:09 - INFO - Preparing files for flashing
25/051/2012 23:51:12 - INFO - Please connect your device into flashmode.
25/051/2012 23:51:22 - INFO - Device connected in flash mode
25/051/2012 23:51:22 - INFO - Opening device for R/W
25/051/2012 23:51:22 - INFO - Reading device information
25/051/2012 23:51:22 - INFO - Phone reading for flashing.
25/051/2012 23:51:22 - INFO - Start Flashing
25/051/2012 23:51:22 - INFO - Flashing loader
25/051/2012 23:51:26 - INFO - Loader version : R4A024 / Bootloader status : UNROOTABLE
25/051/2012 23:51:26 - INFO - Flashing amss_fs.sin
25/051/2012 23:51:26 - INFO - Flashing cache.sin
25/051/2012 23:51:27 - INFO - Flashing fota1.sin
25/051/2012 23:51:28 - INFO - Flashing dsp1.sin
25/051/2012 23:51:32 - ERROR -
25/051/2012 23:51:32 - ERROR - Error flashing. Aborted
25/051/2012 23:51:32 - INFO - Device connected in flash mode
I'm totally baffled at this stage lol
I ran the s1 tool with the phone in Flash Mode:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A013"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1241-6324_2.1.A.0.435
CUSTOM VERSION: 1234-4579_R15B
FILESYSTEM VERSION: VFE-1-4-8_2.1.A.0.435
SERIAL NO: CB511H8XKK
SEMC SIMLOCK CERTIFICATE
Elapsed:19 secs.
You see the phone was like this when I got it, the guy said he tried to update and this happened to it, so I don't even know if debugging and Unknown sources is ticked or not, cosmetically the phone is in as new condition.
Click to expand...
Click to collapse
Hmm bootloader unlocked you think? Might be debugging or maybe not because his update probably failed halfway causing this? I know the x10 is not hard brickable whit locked bootloaders no clue about unlocked ones really running short on ideas ...
Sent from my X10i using xda premium
Yeah, thats what I thought until I seen this post started by Dmac98 the problem is identical. Same country Ireland, same phones X10i, same network I think vodafone. I just think its strange lol. Thanks for your help though, just going to wait and see what se support will say I guess.
Sent from my X10 using xda premium
Roger00 said:
Yeah, thats what I thought until I seen this post started by Dmac98 the problem is identical. Same country Ireland, same phones X10i, same network I think vodafone. I just think its strange lol. Thanks for your help though, just going to wait and see what se support will say I guess.
Sent from my X10 using xda premium
Click to expand...
Click to collapse
no problem if they find out its bootloader unlocked then your screwed :/ as it voids its warranty.
Sent from my X10i using xda premium
I don't think it is unlocked from loader version (wouldn't it begin with r not R?)
Sent from my X10 using XDA App
yeah I also noticed that today as I unlocked the bl on this phone a month ago. I'm convinced its the download fron SE thats the problem.
Sent from my X10 using xda premium
I haven't found the guide to unbrick the SE Xperia 2011 "bricked" device, then here it goes.
All of the following worked on my ST15i Xperia Mini Smultron.
So, your device was briked (doesn't turn on and probably blinks its LED).
If your device's LED works or you are able to turn it to flashmode (green LED light) then you can unbrick it using this short guide. In the over case bring it to Service.
Let me guess. Your device was unlocked and/or rooted just before it got bricked. Right? And you have tried to install official FOTA update. Right? I have bad news. After you have unlocked the bootloader the official installer (built into SE Android ROM) will always brick your smartphone. From now on you have to install all the updates and stuff via Flashtool or Clockwork Recovery only.
I assume you have downloaded and installed Flashtool for Sony Ericsson devices. Also I assume all the necessary drivers are installed on your PC.
Download attached file and extract the *.tft from it.
Put it to the Flashtool/firmwares/ folder.
Start the Flashtool, click Flash icon, select Flashmode, select the *.tft file.
Put your device onto flashmode and flash.
You're right, and there is always a need for these things, thank you.
Thank you for your file.
I've bricked my Xperia yesterday after a OTA update before unlocking bootloader with "Test point" method.
For me, worked flashing stock rom .62 with Wotan Server.
S1 tool flashed correctly ROM but still phone won't boot.
Now I have a question, after flashing new rom and "unbrick" the device my bootloader was unlocked and I must retry the steps of "Testpoint" or it is already unlocked?
SOLVED: Did the job hitting "RESTORE" in s1tool after wiping phone hitting "Restore" in Companion and flashing useless ftf bootloader relocker... '-.-
i cant get it to work
ok, can you please tell me exactly what to do after flashing the files on the phone?
i cant get it to boot, i also tried wotan but to no avail, the phone is dead
however let me tell you what my problem is:
my phone is a non branded ST17i (xperia active) rooted. nothing more not unlocked bootloader, no custom rom.
it was updated about more than a month ago (so i doubt it is bricked for that reason).
yesterday the screen began to act *funny* with a strange colored line in the top (i added an image of how it looked like), i restarted it, and it rebooted fine, so i put it to charge, from time to time within 30 *mins* i checked to see if the line was there again, but nothing, about an hour later i wanted to play with it and check whatsapp, but the screen would not turn on, it was totally frozen, as it happened before i just removed and inserted the battery (since this always fixed it), but then, it would not show a single thing on the screen, actually not even the buttons at the bottom would light up (back-home-menu), the only thing that seems to work is the vibration, and the notification led, after a few tries i removed and inserted the battery and put it to charge, but again, nothing, when it is turned off and you charge it, it reacts to touch lighting the buttons and showing the battery level on screen, but nothing, it is actually dead, so i don't know if it is bricked or no.
firstly i tried flashing with wotan, but nothing, i also tried flashing with seus, but nothing, and i don't understand, what to do with you post, i flash the files you posted, but then what?, do i boot it normally or do i need to flash something else?
i would be very grateful with a detailed step by step
If you haven't unlocked bootloader or flashed custom ROM or kernel your problem is very very strange...
First question: Phone will enter correctly in "Download" mode pressing VOL- during boot?
If you connect the device at PC it will be recognized? Launching Companion will detect a "Generic" SE phone or you will display the exact model? Have you tried a repair?
is not that strange look:
http://forum.xda-developers.com/showthread.php?t=1572972
to your questions:
*yes, the phone enters flash mode
*yes it is correctly recognized by PC
*companion recognizes the exact model
*i have tried more than twice to reinstall and repair the phone software, as stated before, and the progress goes smooth showing NO errors.
phone does not start, does not boot.
if you have any ideas please let me know
linkendis said:
is not that strange look:
http://forum.xda-developers.com/showthread.php?t=1572972
to your questions:
*yes, the phone enters flash mode
*yes it is correctly recognized by PC
*companion recognizes the exact model
*i have tried more than twice to reinstall and repair the phone software, as stated before, and the progress goes smooth showing NO errors.
phone does not start, does not boot.
if you have any ideas please let me know
Click to expand...
Click to collapse
Try to download S1tool and tell me what output do you obtain pressing "IDENTIFY" with Download mode phone attached to PC.
this is what s1tool shows:
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): ST17i
SOFTWARE VERSION: 1250-5521_4.0.2.A.0.62
CUSTOM VERSION: 1257-6548_R3D
FILESYSTEM VERSION: WORLD-i_4.0.2.A.0.62
SERIAL NO: CB5A1HD0V6
SEMC SIMLOCK CERTIFICATE
Elapsed:8 secs.
i see the restore button, but this phone is practically in factory state, as noted before, so i haven't tried anything else.
any ideas will be welcome
linkendis said:
this is what s1tool shows:
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): ST17i
SOFTWARE VERSION: 1250-5521_4.0.2.A.0.62
CUSTOM VERSION: 1257-6548_R3D
FILESYSTEM VERSION: WORLD-i_4.0.2.A.0.62
SERIAL NO: CB5A1HD0V6
SEMC SIMLOCK CERTIFICATE
Elapsed:8 secs.
i see the restore button, but this phone is practically in factory state, as noted before, so i haven't tried anything else.
any ideas will be welcome
Click to expand...
Click to collapse
You not need to restore the device because you have already a locked bootloader.
Try to re-flash with Wotanserver with another firmware version.
If problem persist, I think you need to meet local service center...
Telephone Mini Pro
Boot loader opened
Version 62 is installed
Who I got you update ota
After that turn off the device no longer works
Now the phone does not boot
Tested program FlashTool
Update and work efficiently but the device still does not work
This report flash Toole
02/013/2012 12:13:29 - INFO - Selected SK17i_4.0.2.A.0.62__1251-0103_.ftf
02/013/2012 12:13:29 - INFO - Preparing files for flashing
02/013/2012 12:13:46 - INFO - Please connect your device into flashmode.
02/013/2012 12:13:54 - INFO - Device connected in flash mode
02/013/2012 12:13:54 - INFO - Opening device for R/W
02/013/2012 12:13:54 - INFO - Reading device information
02/013/2012 12:13:54 - INFO - Phone ready for flashmode operations.
02/013/2012 12:13:54 - INFO - Start Flashing
02/013/2012 12:13:54 - INFO - Flashing loader
02/013/2012 12:13:56 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
02/013/2012 12:13:56 - INFO - Flashing adsp.sin
02/013/2012 12:13:59 - INFO - Flashing kernel.sin
02/014/2012 12:14:02 - INFO - Flashing amss_fs.sin
02/014/2012 12:14:02 - INFO - Flashing fota1.sin
02/014/2012 12:14:02 - INFO - Flashing fota0.sin
02/014/2012 12:14:03 - INFO - Flashing apps_log.sin
02/014/2012 12:14:03 - INFO - Flashing amss.sin
02/014/2012 12:14:12 - INFO - Flashing cache.sin
02/014/2012 12:14:13 - INFO - Flashing system.sin
02/016/2012 12:16:17 - INFO - Flashing userdata.sin
02/016/2012 12:16:19 - INFO - Flashing finished.
02/016/2012 12:16:19 - INFO - Please wait. Phone will reboot
02/016/2012 12:16:19 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
02/016/2012 12:16:19 - INFO - Device connected in flash mode
02/016/2012 12:16:21 - INFO - Device disconnected
02/016/2012 12:16:22 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Note When you press the power button glows green LED intermittently and device does not work
Please help me
Raye2 said:
Telephone Mini Pro
Boot loader opened
Version 62 is installed
Who I got you update ota
After that turn off the device no longer works
Now the phone does not boot
Tested program FlashTool
Update and work efficiently but the device still does not work
This report flash Toole
Note When you press the power button glows green LED intermittently and device does not work
Please help me
Click to expand...
Click to collapse
Flash with Wotanserver and next time don't accept OTA updates with unlocked bootloader.
m4x23 said:
Flash with Wotanserver and next time don't accept OTA updates with unlocked bootloader.
Click to expand...
Click to collapse
Thx Man
but The attached file in the main post not fit my problem??
Because I am in my country I can not use this program Wotanserver
Because of the proxy server
try relock the bootloader,and then you can fix it over PC companion.
Raye2 said:
Thx Man
but The attached file in the main post not fit my problem??
Because I am in my country I can not use this program Wotanserver
Because of the proxy server
Click to expand...
Click to collapse
Unfortunatly flashing the .ftf file of main post didn't work for me
I've instantly unbricked the phone with Wotanserver...
My phone has been restored file attachment
Flash does not have to re-generate operating
But after the break cable usb lifting the battery and the back has been successfully reboot by power button
All thanks to you...
Many many thanks. You saved my live.
08/000/2012 21:00:42 - INFO - Selected Sk17a_4.1.B.0.431_Generic Trade US.ftf
08/000/2012 21:00:42 - INFO - Preparing files for flashing
08/001/2012 21:01:45 - INFO - Please connect your device into flashmode.
08/001/2012 21:01:51 - INFO - Device connected in flash mode
08/001/2012 21:01:51 - INFO - Opening device for R/W
08/001/2012 21:01:51 - INFO - Start Flashing
08/001/2012 21:01:51 - INFO - Flashing loader
08/001/2012 21:01:51 - INFO - Ending flash session
08/001/2012 21:01:51 - ERROR -
08/001/2012 21:01:51 - ERROR - Error flashing. Aborted
08/001/2012 21:01:52 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Do you guy have any Idea to fixed this? :'(
i've try this and it's work,
but i disconnect the phone before flashing rom, etc.
i thought i could continue later. but when i try once again, it's not recognize in s1 mode ( volumekey press )
any idea how to make this phone flashable again,
this is the log, after finished i dosconnect the phone
Code:
04/001/2012 18:01:22 - INFO - Device connected in flash mode
04/001/2012 18:01:38 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
04/001/2012 18:01:38 - INFO - Preparing files for flashing
04/001/2012 18:01:38 - INFO - Please connect your device into flashmode.
04/001/2012 18:01:39 - INFO - Opening device for R/W
04/001/2012 18:01:39 - INFO - Reading device information
04/001/2012 18:01:39 - INFO - Phone ready for flashmode operations.
04/001/2012 18:01:39 - INFO - Start Flashing
04/001/2012 18:01:39 - INFO - Processing loader
04/001/2012 18:01:39 - INFO - Checking header
04/001/2012 18:01:39 - INFO - Flashing data
04/001/2012 18:01:40 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
04/001/2012 18:01:41 - INFO - Flashing preset.ta
04/001/2012 18:01:41 - INFO - Writing TA unit : [00, 00, 08, FD, 00, 00, 00, 02, 00, 00]
04/001/2012 18:01:41 - INFO - Ending flash session
04/001/2012 18:01:41 - INFO - Flashing finished.
04/001/2012 18:01:41 - INFO - Please unplug and start your phone
04/001/2012 18:01:41 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
04/001/2012 18:01:41 - INFO - Device connected in flash mode
04/001/2012 18:01:47 - INFO - Log written to C:\Flashtool\flashtool_2012-09-04_05-56-21.log
thanks
Hello, I tried to unbrick my phone, but it doesn't work :/ Flashing is ok, but when I turn the phone it only vibrates and I can't do nothing. Please help me
That might be useful
Ok guys I've Killed the phone now :S need some help....
Tryed to unlock the bootloader and ended up with phone starting only in flashmode.....
The problem is that I cannot flash any stock rom nor karnel... its giving me an error.
Here is the log
05/025/2013 00:25:12 - INFO - <- This level is successfully initialized
05/025/2013 00:25:12 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
05/025/2013 00:25:12 - INFO - You can drag and drop ftf files here to start flashing them
05/025/2013 00:25:17 - INFO - Device disconnected
05/025/2013 00:25:22 - INFO - Selected X10i_3.0.1.G.0.75_CUST-UK GENERIC 1235-7379.ftf
05/025/2013 00:25:22 - INFO - Preparing files for flashing
05/025/2013 00:25:24 - INFO - Please connect your device into flashmode.
05/025/2013 00:25:28 - INFO - Device connected in flash mode
05/025/2013 00:25:28 - INFO - Opening device for R/W
05/025/2013 00:25:28 - INFO - Reading device information
05/025/2013 00:25:28 - INFO - Phone ready for flashmode operations.
05/025/2013 00:25:28 - INFO - Current device : X10i - CB511K0GRX - 1235-7379_R2C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75
05/025/2013 00:25:28 - INFO - Start Flashing
05/025/2013 00:25:28 - INFO - Processing loader
05/025/2013 00:25:28 - INFO - Using an unofficial loader
05/025/2013 00:25:28 - INFO - Checking header
05/025/2013 00:25:28 - INFO - Ending flash session
05/025/2013 00:25:28 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
05/025/2013 00:25:28 - ERROR - Error flashing. Aborted
05/025/2013 00:25:29 - INFO - Device connected in flash mode
05/025/2013 00:25:30 - INFO - Device disconnected
05/025/2013 00:25:31 - INFO - Device connected in flash mode
s1tool
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: FFFF
LOADER AID: DEAD
FATAL ERROR [ SECURITY_CLASS, SIN_header_verification_failed ]
error while uploading HDR block
LOADER NOT STARTED
Elapsed:6 secs.
PROCEDURE STOPPED BY USER
Can I do something about it or to throw it ?
brick fix x10
1-download sony erricson update service
2-accept the dialogue box
3-choose phone model and do according to it.
this will erase ur data and there will be no root in it
it just getting a new life again.
Doesn't work even after downloading update service.
The update service asks me to click on mount sd card option on my phone but can't do that as my phone is dead.
I was updating my phone and it stopped midway due to low battery..it just shows a caution sybol when I start it. please help!!
It works on my case. I flashed my X10 to cm10 last night and messed up the kernel. The phone was stucked on the boot up screen. I used the Sony Update service to restore the phone back to GB 2.3, then restarted the whole process and it worked.
During the update process, it didn’t ask for the SD card. I have my 16GB SD card in my phone all the time during the update. Not sure if that will make any difference. Worth a try.
Hi sir, do you have time? I cant figure out what is wrong with my x10. When i try to flash those Generic Stock Rom, i get to have errors flashing. It aborts sometime when flashing system.sin and other sin depending on the tft file... i dunno what version my phone is but my pc detects it with flashmode. When im using Seus, it fails flashing in about 90% of the process... when booting my phone, just a quick vibrate with green flashes once. Do u have skype account? Hope u have time and can help me. Most of the links in xda our outdated. And i know my phone is outdated too. Thanks and more power
Hi there, I'm new to this forum and just need some help with my Xperia x10i.
Basicly when i put it on charge i get a green led light for like 30 seconds and then the led goes off. I also sometimes when im turning the phone on get 3 red lights which blink, other times when i try to turn the phone on it just vibrates and a green light flashes for like a millisecond. I really don't know whats wrong with the phone and if it can be repaired. I have tried to update it using PC companion but it keeps coming up with an error half way through the update, i have also tried to update it using update service but just like PC companion when its installing the software it installs a bit then comes up saying it cant install the software on my phone. I have also tried to flash the phone using flash tool and using Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf but it keeps saying error and that i need to turn on USB debugging which i cant do as the phone wont come on. Other times flash tool will just freeze when its installing system.sis. Please help me i really want to bring this phone back to life. Any help would be appreciated and if you need more info plz let me know. Thanks
Hello)
1) Change battery
2) Coonect phone to charge without battery. ~15-20 mins
3) Flash ROM via FlashTool =)
Try doing it like this;
1.Without connecting charger, Power on the Phone until it vibrates
2.Connect charger immediately to prevent it from shutting down because of low power
3.Wait until your phone reboots...hope it helps...
gil2004xp said:
Try doing it like this;
1.Without connecting charger, Power on the Phone until it vibrates
2.Connect charger immediately to prevent it from shutting down because of low power
3.Wait until your phone reboots...hope it helps...
Click to expand...
Click to collapse
Have done but still no luck , what else can i do to fix the phone? i really need it fixed. Thanks for the help btw
Leave it for a while on the charger.
After a hour it wil start up again.
any news
nicemusa said:
Have done but still no luck , what else can i do to fix the phone? i really need it fixed. Thanks for the help btw
Click to expand...
Click to collapse
hello,
have you fixed your phone ?
because i have the same issue.
Please help to fix it!
nicemusa said:
Hi there, I'm new to this forum and just need some help with my Xperia x10i.
Basicly when i put it on charge i get a green led light for like 30 seconds and then the led goes off. I also sometimes when im turning the phone on get 3 red lights which blink, other times when i try to turn the phone on it just vibrates and a green light flashes for like a millisecond. I really don't know whats wrong with the phone and if it can be repaired. I have tried to update it using PC companion but it keeps coming up with an error half way through the update, i have also tried to update it using update service but just like PC companion when its installing the software it installs a bit then comes up saying it cant install the software on my phone. I have also tried to flash the phone using flash tool and using Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf but it keeps saying error and that i need to turn on USB debugging which i cant do as the phone wont come on. Other times flash tool will just freeze when its installing system.sis. Please help me i really want to bring this phone back to life. Any help would be appreciated and if you need more info plz let me know. Thanks
Click to expand...
Click to collapse
I have the same problem!
Please help!!
Erkaft95 said:
I have the same problem!
Please help!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=36277073
teddymild said:
Try this http://forum.xda-developers.com/showthread.php?p=36277073
Click to expand...
Click to collapse
My bootloader on this phone is locked!
But today morning I flash via fllashtool X10i_3.0.1.G.0.75_CUST-NL GENERIC 1234-8547.ftf
13/002/2013 12:02:00 - INFO - Selected X10i_3.0.1.G.0.75_CUST-NL GENERIC 1234-8547.ftf
13/002/2013 12:02:00 - INFO - Preparing files for flashing
13/002/2013 12:02:05 - INFO - Device connected in flash mode
13/002/2013 12:02:08 - INFO - Device disconnected
13/002/2013 12:02:11 - INFO - Please connect your device into flashmode.
13/002/2013 12:02:13 - INFO - Device connected in flash mode
13/002/2013 12:02:13 - INFO - Opening device for R/W
13/002/2013 12:02:13 - INFO - Reading device information
13/002/2013 12:02:13 - INFO - Phone ready for flashmode operations.
13/002/2013 12:02:13 - INFO - Current device : X10i - CB511J866B - 1234-4762_R16A - 1227-4612_R2BA026 - 1227-4607_R2BA026
13/002/2013 12:02:13 - INFO - Start Flashing
13/002/2013 12:02:13 - INFO - Processing loader
13/002/2013 12:02:13 - INFO - Checking header
13/002/2013 12:02:13 - INFO - Flashing data
13/002/2013 12:02:14 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
13/002/2013 12:02:14 - INFO - Processing kernel.sin
13/002/2013 12:02:14 - INFO - Checking header
13/002/2013 12:02:15 - INFO - Flashing data
13/002/2013 12:02:17 - INFO - Processing fota0.sin
13/002/2013 12:02:17 - INFO - Checking header
13/002/2013 12:02:17 - INFO - Flashing data
13/002/2013 12:02:18 - INFO - Processing fota1.sin
13/002/2013 12:02:18 - INFO - Checking header
13/002/2013 12:02:18 - INFO - Flashing data
13/002/2013 12:02:19 - INFO - Processing dsp1.sin
13/002/2013 12:02:19 - INFO - Checking header
13/002/2013 12:02:19 - INFO - Flashing data
13/002/2013 12:02:26 - INFO - Processing amss.sin
13/002/2013 12:02:26 - INFO - Checking header
13/002/2013 12:02:26 - INFO - Flashing data
13/002/2013 12:02:38 - INFO - Processing amss_fs.sin
13/002/2013 12:02:38 - INFO - Checking header
13/002/2013 12:02:38 - INFO - Flashing data
13/002/2013 12:02:38 - INFO - Processing system.sin
13/002/2013 12:02:38 - INFO - Checking header
13/002/2013 12:02:38 - INFO - Flashing data
13/005/2013 12:05:12 - INFO - Processing userdata.sin
13/005/2013 12:05:12 - INFO - Checking header
13/005/2013 12:05:12 - INFO - Flashing data
13/005/2013 12:05:15 - INFO - Processing cache.sin
13/005/2013 12:05:15 - INFO - Checking header
13/005/2013 12:05:15 - INFO - Flashing data
13/005/2013 12:05:15 - INFO - Ending flash session
13/005/2013 12:05:15 - INFO - Flashing finished.
13/005/2013 12:05:15 - INFO - Please unplug and start your phone
13/005/2013 12:05:15 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
13/005/2013 12:05:16 - INFO - Device connected in flash mode
13/007/2013 12:07:09 - INFO - Device disconnected
But the phone don't boot up!
May be the problem might be with the lcd . Put a sim card , after switching on the phone after 3 minutes call that number , See whether the phone rings . If the phone rings , it might be the lcd problem . Can u kindly confirm it .
Thanks
hi brother iam so sory for my bad english i have the same preblem i enchour you that your boot loader is dead the same with mee to solve it you need to flash the bootloader with medusa box or s1tool if you dont have mony to buy the box use s1 tool then you have to remove the model stiker behande the battery and serch on internet for gnd and test piont for the x10i then folow this enstraction 1.open s1 tool 2.then clik in patch semcboot 3.folow the red instraction displayed on s1 tool the test piont should be atatched to the gnd pin with a metal piec then press test piont redy and it should start flashing after the prosses is finished you may diconect the phone and boot it but it dosent boot stock sony logo after that part avery thing is easy then flash the phone frimware with sony flashtool and thats it .if you asked me where i find the gnd and test piont iam now searching for it as soon i get it i will reply to this thanks to laser for creating this tool report your secsess .:good:
I put new battery in to x10i but still the red light is brinks 3times no power
Hi!
I have a Xperia X10 Mini Pro (U20) with Stock Firmware (after recovery with "UpdateService" from SE).
I have installed CWM successfully with "CWMInstaller - Windows - v5".
When I try to install "MiniCM7-2.2.1-mimmi" (or 2.2.2) it says that I need a nAA-Kernel but successfully installs CM7.
When I do a reboot CWM says that "recovery is bad and has to be renewed". After that all I get is the white "Sony Ericsson" lettering (again with the option to start CWM when pressing the back button several times).
So I tried to follow this "Bootloader and kernel guide" and unlock my bootloader first using Flashtool. But when the phone restarts it "hangs" on the white "Sony Ericsson" lettering. When I try again, Flashtool tells me that it is not possible to unlock this bootloader.
My phone is produced 10W42 - could it really be that the ancient stock firmware is the only one which works?
All I want is a more modern and fast (lightweight) android version to use my old phone furthermore.
Thanks in advance for your advice and help!
greetz
davie
davie2000 said:
Hi!
I have a Xperia X10 Mini Pro (U20) with Stock Firmware (after recovery with "UpdateService" from SE).
I have installed CWM successfully with "CWMInstaller - Windows - v5".
When I try to install "MiniCM7-2.2.1-mimmi" (or 2.2.2) it says that I need a nAA-Kernel but successfully installs CM7.
When I do a reboot CWM says that "recovery is bad and has to be renewed". After that all I get is the white "Sony Ericsson" lettering (again with the option to start CWM when pressing the back button several times).
So I tried to follow this "Bootloader and kernel guide" and unlock my bootloader first using Flashtool. But when the phone restarts it "hangs" on the white "Sony Ericsson" lettering. When I try again, Flashtool tells me that it is not possible to unlock this bootloader.
My phone is produced 10W42 - could it really be that the ancient stock firmware is the only one which works?
All I want is a more modern and fast (lightweight) android version to use my old phone furthermore.
Thanks in advance for your advice and help!
greetz
davie
Click to expand...
Click to collapse
When you install CWM it is installed in the system part of the ROM. When you installed MiniCM7 it got wiped out, because MiniCM7 is for the nAa-kernel, and in that kernel CWM is built in. Which means it doesn't need to be in the MiniCM7 ROM. That's why you lost it.
And ofcourse it 'hangs' on the white SE lettering, because the ROM you installed does not work with the Sony Ericsson kernel.
You say you unlocked the bootloader, so why don't you flash the nAa-kernel?
Prepare flashtool to flash it, then attach the usb-cable and press home- and back-buttons together to force a restart. If the bootloader unlock was successful the flash will get through and after that, you'll have CWM back and you will continue to boot into the ROM too.
And be very careful not to flash the x10blrelock.ftf by accident, it will definitely break your phone. Best is to remove that from the flashtool/firmwares folder before you proceed.
SmG67 said:
...
You say you unlocked the bootloader, so why don't you flash the nAa-kernel?
Prepare flashtool to flash it, then attach the usb-cable and press home- and back-buttons together to force a restart. If the bootloader unlock was successful the flash will get through and after that, you'll have CWM back and you will continue to boot into the ROM too.
And be very careful not to flash the x10blrelock.ftf by accident, it will definitely break your phone. Best is to remove that from the flashtool/firmwares folder before you proceed.
Click to expand...
Click to collapse
Thanks for your answer, SmG67.
The problem is, that I have _tried_ to unlock the bootloader, but it did not finish. The "s1tool" still shows a capital R in the version ("RUNNING S1_EROM VER 'R8A029'") which means "not unlocked".
I also tried to install the kernel "U20_2.6.32.61-nAa-06.ftf" but this does not work as the bootloader is locked.
So can you give me a tip, how I could move on?
davie2000 said:
Thanks for your answer, SmG67.
The problem is, that I have _tried_ to unlock the bootloader, but it did not finish. The "s1tool" still shows a capital R in the version ("RUNNING S1_EROM VER 'R8A029'") which means "not unlocked".
I also tried to install the kernel "U20_2.6.32.61-nAa-06.ftf" but this does not work as the bootloader is locked.
So can you give me a tip, how I could move on?
Click to expand...
Click to collapse
You should not have proceeded to install the ROM in the first place if you didnt unlock it. Open SONY Update Service in PC, click repair and follow what they say. When you connect your phone to PC for repair, follow what SmG67 told you
Sent from my E10i using xda premium
pongnamu said:
You should not have proceeded to install the ROM in the first place if you didnt unlock it. Open SONY Update Service in PC, click repair and follow what they say. When you connect your phone to PC for repair, follow what SmG67 told you
Click to expand...
Click to collapse
Thanks for your reply, pongnamu!
I am unsettled now, so I want to make sure to do the right things:
I have "repaired" the phone using UpdateService and made the first setup - phone is now running and USB debugging is switched on.
Then I started flashtool and clicked on the flash-button (U20_2.6.32.61-nAa-06.ftf); followed the instructions but it quits working after phone restart with the following output:
Code:
13/006/2013 12:06:28 - INFO - <- This level is successfully initialized
13/006/2013 12:06:28 - INFO - Flashtool Version 0.9.12.1 built on 2013-06-04 22:50:00
13/006/2013 12:06:32 - INFO - Device disconnected
13/007/2013 12:07:27 - INFO - Selected U20 / nAa-06 / 2.6.32.61-nAa-06
13/007/2013 12:07:27 - INFO - Preparing files for flashing
13/007/2013 12:07:27 - INFO - Please connect your device into flashmode.
13/008/2013 12:08:09 - INFO - Device connected in flash mode
13/008/2013 12:08:09 - INFO - Opening device for R/W
13/008/2013 12:08:09 - INFO - Reading device information
13/008/2013 12:08:09 - INFO - Phone ready for flashmode operations.
13/008/2013 12:08:09 - INFO - Current device : U20i - CB511P8HKN - 1238-7168_R5B - 1235-3411_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
13/008/2013 12:08:09 - INFO - Start Flashing
13/008/2013 12:08:09 - INFO - Processing loader.sin
13/008/2013 12:08:09 - INFO - Checking header
13/008/2013 12:08:09 - INFO - Ending flash session
[COLOR="Red"]13/008/2013 12:08:09 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"[/COLOR]
13/008/2013 12:08:09 - INFO - Device connected in flash mode
[COLOR="Red"]13/008/2013 12:08:10 - ERROR - Error flashing. Aborted[/COLOR]
13/008/2013 12:08:11 - INFO - Device disconnected
13/008/2013 12:08:12 - INFO - Device connected in flash mode
13/008/2013 12:08:27 - INFO - Device disconnected
13/008/2013 12:08:35 - INFO - Device connected with USB debugging off
13/008/2013 12:08:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
The phone is connected and shows an orange LED and the loading screen; nothing else happens.
Regarding to S1info the bootloader is still locked:
Code:
RUNNING S1_EROM VER "[COLOR="Red"]R[/COLOR]8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): U20i
SOFTWARE VERSION: 1235-3411_2.1.1.C.0.0
CUSTOM VERSION: 1238-7168_R5B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.C.0.0
SERIAL NO: xxxxxxxxxx
[COLOR="YellowGreen"]SEMC SIMLOCK CERTIFICATE[/COLOR]
Elapsed:12 secs.
Can you help me out again?
davie2000 said:
...
Can you help me out again?
Click to expand...
Click to collapse
Root the phone again with flashtool and then unlock the bootloader using flashtool. After that, you should be able to flash the kernel.
SmG67 said:
Root the phone again with flashtool and then unlock the bootloader using flashtool. After that, you should be able to flash the kernel.
Click to expand...
Click to collapse
Thanks to your reply, I was able to root the device with flashtool. Afterwards I successfully started Superuser and switched off the phone again.
While unlocking the bootloader (button BLU) with flashtool afterwards it gave me the following output:
Code:
13/037/2013 16:37:33 - INFO - <- This level is successfully initialized
13/037/2013 16:37:33 - INFO - Flashtool Version 0.9.12.1 built on 2013-06-04 22:50:00
13/037/2013 16:37:38 - INFO - Device disconnected
13/038/2013 16:38:54 - INFO - Device connected with USB debugging off
13/038/2013 16:38:54 - INFO - For 2011 devices line, be sure you are not in MTP mode
13/038/2013 16:38:54 - INFO - Device connected with USB debugging on
13/038/2013 16:38:55 - INFO - Connected device : SonyEricson X10 Mini Pro
13/038/2013 16:38:55 - INFO - Installed version of busybox : N/A
13/038/2013 16:38:55 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29 / Build number : 2.1.1.C.0.0
13/039/2013 16:39:02 - INFO - Decrypting E:\Program Files (x86)\[HARDWARE]\[HANDY]\Flashtool\custom\root\PsNeuter\psneuter.tar.uue.enc to E:\Program Files (x86)\[HARDWARE]\[HANDY]\Flashtool\custom\root\PsNeuter\psneuter.tar.uue
13/039/2013 16:39:10 - INFO - Pushing E:\Program Files (x86)\[HARDWARE]\[HANDY]\Flashtool\custom\root\PsNeuter\psneuter.tar.uue to /data/local/tmp
13/039/2013 16:39:10 - INFO - Pushing E:\Program Files (x86)\[HARDWARE]\[HANDY]\Flashtool\.\devices\busybox\1.20.2\busybox to /data/local/tmp/busybox
13/039/2013 16:39:10 - INFO - Pushing E:\Program Files (x86)\[HARDWARE]\[HANDY]\Flashtool\custom\root\subin\Superuser\su to /data/local/tmp/su
13/039/2013 16:39:11 - INFO - Pushing E:\Program Files (x86)\[HARDWARE]\[HANDY]\Flashtool\custom\root\subin\Superuser\Superuser.apk to /data/local/tmp/Superuser.apk
13/039/2013 16:39:11 - INFO - Running part1 of Root Exploit, please wait
13/039/2013 16:39:12 - INFO - Running rootit
13/039/2013 16:39:13 - INFO - Waiting for device. After 60secs, stop waiting will be forced
13/039/2013 16:39:13 - INFO - Device disconnected
13/039/2013 16:39:14 - INFO - Device connected with USB debugging on
13/039/2013 16:39:15 - INFO - Running part2 of Root Exploit
13/039/2013 16:39:15 - INFO - Running rootit2
13/039/2013 16:39:17 - INFO - Finished!.
13/039/2013 16:39:17 - INFO - Root should be available after reboot!
13/039/2013 16:39:17 - INFO - Device disconnected
13/040/2013 16:40:53 - INFO - Please connect your device into flashmode.
13/041/2013 16:41:58 - INFO - Device connected in flash mode
13/041/2013 16:41:58 - INFO - Opening device for R/W
13/041/2013 16:41:58 - INFO - Reading device information
13/041/2013 16:41:58 - INFO - Phone ready for flashmode operations.
13/041/2013 16:41:58 - INFO - Current device : U20i - CB511P8HKN - 1238-7168_R5B - 1235-3411_2.1.1.C.0.0 - WORLD-1-8_2.1.1.C.0.0
13/041/2013 16:41:58 - INFO - Processing loader.sin
13/041/2013 16:41:58 - INFO - Checking header
13/041/2013 16:41:58 - INFO - Flashing data
13/042/2013 16:42:00 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Boot version : R8A029 / Bootloader status : UNROOTABLE
13/042/2013 16:42:00 - INFO - Start Reading unit 00000851
13/042/2013 16:42:00 - INFO - Reading TA finished.
13/042/2013 16:42:00 - INFO - Ending flash session
13/042/2013 16:42:00 - INFO - Waiting for device to reboot
13/042/2013 16:42:00 - INFO - Waiting for device
13/042/2013 16:42:00 - INFO - Device connected in flash mode
13/042/2013 16:42:01 - INFO - Device disconnected
13/042/2013 16:42:03 - INFO - Device connected in flash mode
13/042/2013 16:42:22 - INFO - Device disconnected
13/042/2013 16:42:31 - INFO - Device connected with USB debugging off
13/042/2013 16:42:31 - INFO - For 2011 devices line, be sure you are not in MTP mode
There are no errors this time, but again nothing more happens: phone is loading and showing orange LED.
I am surprised of the log line saying that "Bootloader status is UNROOTABLE"?
btw: S1info still gives me a uppercase "R" for "not unlocked".
Can I proceed flashing the U20_2.6.32.61-nAa-06.ftf?
davie2000 said:
There are no errors this time, but again nothing more happens: phone is loading and showing orange LED.
I am surprised of the log line saying that "Bootloader status is UNROOTABLE"?
btw: S1info still gives me a uppercase "R" for "not unlocked".
Can I proceed flashing the U20_2.6.32.61-nAa-06.ftf?
Click to expand...
Click to collapse
That will fail since your bootloader is still locked. Not sure why flashtool failed to unlock it, but maybe you can try the manual method, as linked to in the opening post of the kernel.
SmG67 said:
That will fail since your bootloader is still locked. Not sure why flashtool failed to unlock it, but maybe you can try the manual method, as linked to in the opening post of the kernel.
Click to expand...
Click to collapse
You mean to unlock bootloader with "msm7227_semc.cmd" as stated in the "Bootloader and kernel guide" (from above)?
Because this always leads to:
Code:
process requires standard 2.x android firmware.
Drücken Sie eine beliebige Taste . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
and the phones LED flashing red sometimes
Thats not the first device I am using custom firmware with, but this phone resists all my attempts.
Finally I managed to run CM7 on my phone following this german instruction.
My mistake was that during the flash process the phone has to be switched on normally and not to be connected in flashmode (pressing back button while plugging USB in).
Thanks for your suggestions and hints!