Related
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
lingarajug said:
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Are you using the right siyah?
Bleh
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
korockinout13 said:
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
Click to expand...
Click to collapse
It does have mali
Doesn't matter what version of kernel you use from my understanding... (as long as it's for this phone)
Flashing the ROM, via CWM, will overwrite whatever kernel is installed with its own kernel.
Something is wrong, true. But I don't believe it to be Siyah or SuperNexus.
Have you tried re-downloading SuperNexus and flashing the new dl? You may have had a bad dl.
Oh, and if I'm wrong about anything, please correct me. Always willing to learn!
Clay
Team Pirate
Sent from my PINK GSwagger2
And the logcat says?
Sent from Arkham
0. Complete wipe of course.
1.Flash supernexus build 5 + gapps.
2.Reboot, Let it boot up once atleast.
3.Boot into recovery
4. wipe, dalvik cache
5. flash siyah.
6. Reboot
thank you everyone, I'm tired to see my phone go blank again, I read some posts saying siyah gives better battery life than the kernel included in the ROM, which was the reason I wanted to try it, I have tried siyah with older supernexus ROM and currently using built in kernel and notice no difference, I guess I should try it before asking it here, thanks again everyone for ur support.
Sent from my SGH-I777 using xda app-developers app
4.3.3 nomswap??
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
t7reyeslua said:
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
Click to expand...
Click to collapse
You need mswap on all JB roms...
Thanks
122ninjas said:
You need mswap on all JB roms...
Click to expand...
Click to collapse
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
t7reyeslua said:
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
Click to expand...
Click to collapse
Mswap and noMswap effects people hearing you not you hearing them
Hi all, only ever used Windows & Odin to flash Official/Leaked ROMs + Kernals. But have no access to a PC (Travelling round Thailand)
Anyway my phone keeps restarting when copy/pasting from chrome and maps so time to flash and new fancy 4.2 only lockscreen looks cool!
Currently on whatever the beta/leaked JB ROM was a few months ago.
Wanting this: http://forum.xda-developers.com/showthread.php?t=1850942
Hello there,
If you've flashed a custom kernel through Odin already, then you should be able to just download the 4.2.2 AOKP MR1 Build 4 zip and flash it through CWM, that is if you've flashed the custom kernel.
Let me know if you need more explaining.
With regards,
Beston94
beston94 said:
Hello there,
If you've flashed a custom kernel through Odin already, then you should be able to just download the 4.2.2 AOKP MR1 Build 4 zip and flash it through CWM, that is if you've flashed the custom kernel.
Let me know if you need more explaining.
With regards,
Beston94
Click to expand...
Click to collapse
Thanks, totally didn't enter my mind I could just flash it in CWM, lol.
Hey guys.
I just bought a samsung tab 2 10.1 and want to flash it to cyanogen to get the multiple users that comes with android 4.2.x
I havent flashed in a while since i updated my i9100 to 4.1.2, so i thought best to flash my i9100 to cyanogen first to try it out as my phone is already rooted. I found a few guides for installing cyanogen to my phone using cwm recovery to install from the SD card.
I remember rooting my device back when i updated it to 4.1.2 but when i tried to boot into cwm is would boot into the stock android recovery.
so i figured i needed to flash cwm recovery.
after checking all kies processes were stopped i flashed the kernel "GT-I9100_ClockworkMod-Recovery_4.0.1.4" , but the phone would not boot and hang at start screen.. as a plus side i now had access to cwm recovery from boot... ironic.
so i booted into cwm recovery thinking to install cyanogen mod as i thought maybe the rom wasn't compatible with the kernel?
but noticed that the cyanogen rom was not present on the menu in cwm recovery, must of put it in the wrong place. I was now thinking to get my phone to boot into 4.1.2 that should still be on the phone, since the current kernel wasn't working i flashed "Siyah-v5-MCM-i9100-vsync_sysfs-20130217" in hopes it would be compatible.. still no luck with it booting. but i still have access to CWM recovery.
Any thoughts on how i should proceed? if i can get cyanogen onto the SD card should i install it via CWM?
little lost at the moment. been a while since i done all this.
here is the information i noted down before i started today.
4.1.2
i9100xxls8
3.0.31-863787 [email protected] #3 smp preempt thu jan 31 12:20:07 kst 2013
JZO54K.I9100xxms1
Thanks for reading.
Serathian
Philz kernel lss flash that through odin. Reboot to recovery, do the wipes and and reboot. 4.1.2 should boot up then. Then move custom rom to int sd and flash away. Philz installs custom cwm. Once you have flash custom rom philz will be replaced with stock custom kernel with cwm built in to it.
andrewwright said:
Philz kernel lss flash that through odin. Reboot to recovery, do the wipes and and reboot. 4.1.2 should boot up then. Then move custom rom to int sd and flash away. Philz installs custom cwm. Once you have flash custom rom philz will be replaced with stock custom kernel with cwm built in to it.
Click to expand...
Click to collapse
I'll give it a shot, is the Philz kernel you mentioned this one?;
<< 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
I'm not to sure what kernel version i need.
how would i find out this information ?
Many thanks.
Edit:
I noticed in my previous notes i made when first flashing my phone a year or so ago. The kernel i used was this;
3.0.15-I9100BGLP8-CL317471 [email protected]#3
It is now kernel version;
3.0.31-863787 [email protected] #3 smp preempt thu jan 31 12:20:07 kst 2013
which has no reference to previous kernels. but my current baseband version is: i9100xxls8
LS8 stands out in both... so would using PhilZ-cwm6-XWLSY-ORA-5.10.0.tar.md5 work on my phone?
Lss will work as it for 4.1.2 it just has newer cwm installed.tar is for odin. You could get the zip one and put on an sd card put bk in your phone and flash it like that. Make sure its zip not tar for flashing in cwm.
Thanks
andrewwright said:
Lss will work as it for 4.1.2 it just has newer cwm installed.tar is for odin. You could get the zip one and put on an sd card put bk in your phone and flash it like that. Make sure its zip not tar for flashing in cwm.
Click to expand...
Click to collapse
Thanks, that worked. opted for no installing the nightly version of cyanogenmod as i would like something more stable on my phone.
I've been looking at Resurrection Remix 3.1.2 or CM1UI Jelly Bean.
Is the Philz kernel i installed a widely compatible kernel or should i install Siyah ? my last attempt to install Siyah kernel lead me to write this post.. how would i go about installing a more widely compatible kernal with out ending up in a hang screen again ?
Kind regards and many thanks.
Serathian
Serathian said:
Is the Philz kernel i installed a widely compatible kernel or should i install Siyah ? my last attempt to install Siyah kernel lead me to write this post..
Click to expand...
Click to collapse
By 'compatible', you mean the kernel works with many ROMs?
Philz is a stock based kernel. So it only works on stock based ROMs, and depends on the android version and the build versions (like LSS, LSJ, LSD etc). Siyah is more compatible, because it only depends on the android version (like JB, ICS or GB).
You had a bootloop before after flashing Siyah mcm kernel, because the mcm kernel supports AOSP 4.2.2 ROMs, not stock JB.
Serathian said:
how would i go about installing a more widely compatible kernal with out ending up in a hang screen again ?
Click to expand...
Click to collapse
To avoid bootloops after flashing a kernel, use these tips:
1. Flash only kernels supported by your current firmware. Suppose you are running stock JB and you want to flash AOSP 4.2.2 ROM. You might be tempted to flash Siyah mcm kernel (because it supports AOSP 4.2.2). But that would end up in a bootloop as Siyah mcm doesn't support stock JB! :good:
2. Use a kernel cleaning script before flashing any kernels. :good:
immortalneo said:
By 'compatible', you mean the kernel works with many ROMs?
Philz is a stock based kernel. So it only works on stock based ROMs, and depends on the android version and the build versions (like LSS, LSJ, LSD etc). Siyah is more compatible, because it only depends on the android version (like JB, ICS or GB).
You had a bootloop before after flashing Siyah mcm kernel, because the mcm kernel supports AOSP 4.2.2 ROMs, not stock JB.
To avoid bootloops after flashing a kernel, use these tips:
1. Flash only kernels supported by your current firmware. Suppose you are running stock JB and you want to flash AOSP 4.2.2 ROM. You might be tempted to flash Siyah mcm kernel (because it supports AOSP 4.2.2). But that would end up in a bootloop as Siyah mcm doesn't support stock JB! :good:
2. Use a kernel cleaning script before flashing any kernels. :good:
Click to expand...
Click to collapse
Thanks for your reply, i have a few questions to try and understand.
Would i be right in saying;
When im looking to install a new kernel and/or Rom. My check list should be;
1. Kernel to phone compatability. I.e my phone is LS8 so i look for LSS/LSY/LSD soforth and so-on.
2. Kernel to Romcompatability. I.e Philz is a stock kernal hence why it works with 4.1.2 stock Rom.
So if i want to install Resurection Remixed i believe its a modified stock Rom so it should work with Philz?
As would cyanogenmod as it is modified stock?
Or is even that modified to much?
If i want to change both kernel and Rom, would it work if i installed for example siyah kernel then boot into CWM recovery and installed from there a new Rom?
Im looking to try out a few roms on my i9100, mainly Reserection remix, and other cyanogenmod clones with light modification as i enjoy the stock android experiance.
Also looking to install cyanogenmod to my p5100 tab. Flashing Philz p5100 kernal and then installing superuser through recovery and then installing cyanogenmod 10 stable version?
thanks for reading and taking the time to anwser my previous questions.
Many thanks
Serathian.
Serathian said:
Would i be right in saying;
When im looking to install a new kernel and/or Rom. My check list should be;
1. Kernel to phone compatability. I.e my phone is LS8 so i look for LSS/LSY/LSD soforth and so-on.
2. Kernel to Romcompatability. I.e Philz is a stock kernal hence why it works with 4.1.2 stock Rom.
So if i want to install Resurection Remixed i believe its a modified stock Rom so it should work with Philz?
As would cyanogenmod as it is modified stock?
Click to expand...
Click to collapse
Don't worry, things can be a bit hard to digest at first.
Let me make it easier:
1. U are currently using a stock or custom ROM, but you want to change the kernel (without any plans to flash a new ROM). In this case, you need to select a kernel that is compatible with your current ROM.
2. U are on a stock ROM, and you need to flash a custom ROM. You want to flash a kernel to root it and install CWM (to enable u to flash a new ROM). In this case also, u should flash a kernel that supports your current stock ROM.
3. U are on a custom ROM, and you want to try another custom ROM (which may require another kernel to support it). In this case, you DON'T need to flash a new kernel that will support ur new ROM. You can flash the new ROM directly. All custom ROMs come with their own supported kernels bundled in the ROM. So, after flashing the new ROM, your current kernel will be REPLACED by a supported one from the new ROM.
Better?
"To err is human, to forgive is divine. "
Sent from my SGS II
I dont believe that rr is stock based. Sorry I didnt reply xda app was down. Immortalneo is top man and will guide you down the right path.:thumbup:
immortalneo said:
Don't worry, things can be a bit hard to digest at first.
Let me make it easier:
1. U are currently using a stock or custom ROM, but you want to change the kernel (without any plans to flash a new ROM). In this case, you need to select a kernel that is compatible with your current ROM.
2. U are on a stock ROM, and you need to flash a custom ROM. You want to flash a kernel to root it and install CWM (to enable u to flash a new ROM). In this case also, u should flash a kernel that supports your current stock ROM.
3. U are on a custom ROM, and you want to try another custom ROM (which may require another kernel to support it). In this case, you DON'T need to flash a new kernel that will support ur new ROM. You can flash the new ROM directly. All custom ROMs come with their own supported kernels bundled in the ROM. So, after flashing the new ROM, your current kernel will be REPLACED by a supported one from the new ROM.
Better?
Click to expand...
Click to collapse
So my breakdown would be I'm using a Stock ROM with Philz kernel rooted and CWM. I want to Install Resurrection Remix which is a 4.2.x ROM, Philz is a 4.1.x Kernel so i need to install a new kernel to support Resurrection Remix? or would that come with its own Kernel?
And for my tablet. I flash Philz kernel and install superuser to root the device. so now its stock Rom with Philz kernel. So when i install Cyanogenmod Rom it will install its own Kernel or do i also need to install a Kernel that supports 4.2.x?
Or is it Firmware version based Kernel updates that happen when you install and new custom ROM?
i.e Running 4.1.x kernel and installing a 4.1.x Custom ROM will update the kernel, but installing a 4.2.x ROM will not?
vice versa Running a 4.2.x kernel and installing a 4.2.x ROM will update the kernel, but installing a 4.1.x ROM will not?
Kind Regards, I appreciate your time for reading my mind numbing questions.
Serathian
For you i9100 just flash the rom using philz cmw recovery and once its done you will have a custom rom with custom cm kernel which is rooted and has cwm with it. I would say to format system ,data, cache and preload before you flash it using philz recovery and make sure the rom and gapps is on int sd card were you can find it.
As for the tablet make sure philz is compatible with that tablet first!! Dont just flash it on that thinking because its 4.1.2 it will work.
Btw with philz also come with root access too.
Serathian said:
So my breakdown would be I'm using a Stock ROM with Philz kernel rooted and CWM. I want to Install Resurrection Remix which is a 4.2.x ROM, Philz is a 4.1.x Kernel so i need to install a new kernel to support Resurrection Remix? or would that come with its own Kernel?
Click to expand...
Click to collapse
No, you don't need to install a new kernel, because flashing RR will flash a compatible kernel (included in the ROM) by itself. :good:
Serathian said:
And for my tablet. I flash Philz kernel and install superuser to root the device. so now its stock Rom with Philz kernel. So when i install Cyanogenmod Rom it will install its own Kernel or do i also need to install a Kernel that supports 4.2.x?
Click to expand...
Click to collapse
CM ROM will install its own kernel, so you don't need to do that. :good:
Serathian said:
Or is it Firmware version based Kernel updates that happen when you install and new custom ROM?
i.e Running 4.1.x kernel and installing a 4.1.x Custom ROM will update the kernel, but installing a 4.2.x ROM will not?
vice versa Running a 4.2.x kernel and installing a 4.2.x ROM will update the kernel, but installing a 4.1.x ROM will not?
Click to expand...
Click to collapse
Don't overcomplicate stuff mate. When you flash a ROM, the kernel contained in the ROM will be replace your current kernel. Simple.
Thanks a lot!!!
I installed RR to my i9100 and cm10.1 to my p5100.
I'm having a little trouble with i9100 device though, I keep getting random sim locks on the device.. Not sure what could be causing it. It didn't happen on stock 4.1.2.
The devices will be locked and when I wake it I get prompted for the sim lock code. I now have the sim lock on my phone deactivated but I'm fearful that even thought I am not getting prompted for the sim code, the sim could be de-activated while the phone is in sleep thus not connect to the network?
Could be a loss of signal activate a security feature of the sim. Or a problem with the kernel?
Kind regards.
Many many thanks for all your advice into helping me understand a little better.
Serathian.
Sent from my GT-P5100 using xda app-developers app
If you're sim locked, then you want the app 'Galaxsim unlock'. Search for the xda thread, the OP is spocky12 if that helps you find it. It won't be kernel related. And, test it for yourself. See if you get messages /calls / push notifications while your screen is off & phone is sleeping.
Sent from a galaxy far, far away
The i9100 was originally sim locked, but I paid someone to unlock it, once I got the phone back from him "unlocking" it. It was apparent that he has flashed the device with a new kernel and ROM in order to unlock it... Not to sure of the process. A couple months later I flashed 4.1.2 as it wasn't available as a update on the ROM he installed. The phone re-sim locked and I downloaded the app you mentioned and unlocked the phone successfully, been happily using it up until I installed RR. Now I'm suffering from random pin locks. The phone connects to the network and functions perfectly, apart from said sim locks.
My only fear is missing important calls if this lock is causing network disconnections. Can I log network functions and connectivity to see what's causing it?
Regards
Sent from my GT-P5100 using xda app-developers app
My phone just gets stuck in a black screen when I try to boot into recovery. It happend once a few days ago, and i soloved it by going again to stock by odin and rooting it again. It booted to recovery the first time, i flashed carbon rom nightly 26 and now when I try to update, it doenst boot again. What is happening?
Info+New Kernel/Recovery
francantabria said:
My phone just gets stuck in a black screen when I try to boot into recovery. It happend once a few days ago, and i soloved it by going again to stock by odin and rooting it again. It booted to recovery the first time, i flashed carbon rom nightly 26 and now when I try to update, it doenst boot again. What is happening?
Click to expand...
Click to collapse
Firstly: Please give more detailed information (which kernel do you use, which ROM did you use before the problem occurred?)
Secondly: It is possible that you can't acess recovery mode anymore when flashing new updates. Happens with CM 10.2 OTA Update right now. The solution would be to flash a new recovery using Heimdall (Open-Source ODIN alternative) [Didn't try that, but should theoretically work] or, mor simple, a new kernel. Dorimany v9.34 is suited perfectly for that. Download here: http://dorimanx.shine.sk/ .
H3llwar said:
Firstly: Please give more detailed information (which kernel do you use, which ROM did you use before the problem occurred
Secondly: It is possible that you can't acess recovery mode anymore when flashing new updates. Happens with CM 10.2 OTA Update right now. The solution would be to flash a new recovery using Heimdall (Open-Source ODIN alternative) [Didn't try that, but should theoretically work] or, mor simple, a new kernel. Dorimany v9.34 is suited perfectly for that. Download here: http://dorimanx.shine.sk/ .
Click to expand...
Click to collapse
Well, i used Carbon Rom for a few weeks, so that was definitly the rom. Talking about the kernel, I dont even know how to install one.. haha Now in kernel version it says..
3.0.64 CM gb07657a
[email protected] #1 (I dont know what kernel it is)
Yeah but even if I dont want to flash an update, just boot recovery, I cant. Have you any link to know about Heimdall? Or how to install Dorimany? Im a beginner I have to say.
Thanks
francantabria said:
Well, i used Carbon Rom for a few weeks, so that was definitly the rom. Talking about the kernel, I dont even know how to install one.. haha Now in kernel version it says..
3.0.64 CM gb07657a
[email protected] #1 (I dont know what kernel it is)
Yeah but even if I dont want to flash an update, just boot recovery, I cant. Have you any link to know about Heimdall? Or how to install Dorimany? Im a beginner I have to say.
Thanks
Click to expand...
Click to collapse
You installed a Kernel while rooting your phone: Its the .tar that you have to put into the PDA section in ODIN. There are Kernels with .tar and .zip: .tar files are only flashable using Odin while .zip files are flashed using the recovery just like you flash ROMs. I guess your Kernel is a custom CM Kernel (CM for Cyanogen Mod). Carbon ROM is probably based on CM. There is currently no other workaround to get your recovery back then flashing a new kernel/recovery. I am currently working on an easy workaround for this problem, but it will take a while.
Dorimanx is downloadable here http://dorimanx.shine.sk/ and should be compatible: Just flash it like you did when rooting your phone in the beginning, just with Dorimanx .tar in PDA. Recovery should work again afterwards.
My mistake: It's Dorimanx, not Dorimany
Hit Thanks and just ask if you need additional help!
H3llwar said:
You installed a Kernel while rooting your phone: Its the .tar that you have to put into the PDA section in ODIN. There are Kernels with .tar and .zip: .tar files are only flashable using Odin while .zip files are flashed using the recovery just like you flash ROMs. I guess your Kernel is a custom CM Kernel (CM for Cyanogen Mod). Carbon ROM is probably based on CM. There is currently no other workaround to get your recovery back then flashing a new kernel/recovery. I am currently working on an easy workaround for this problem, but it will take a while.
Dorimanx is downloadable here http://dorimanx.shine.sk/ and should be compatible: Just flash it like you did when rooting your phone in the beginning, just with Dorimanx .tar in PDA. Recovery should work again afterwards.
My mistake: It's Dorimanx, not Dorimany
Hit Thanks and just ask if you need additional help!
Click to expand...
Click to collapse
Yeah, I remember.. it was siyah kernel.
So in your opinion I should flash Dorimanx by Odin then? No other way to fix isnt it? and.. in dorimanx page, which one of all them should I download?
francantabria said:
Yeah, I remember.. it was siyah kernel.
So in your opinion I should flash Dorimanx by Odin then? No other way to fix isnt it? and.. in dorimanx page, which one of all them should I download?
Click to expand...
Click to collapse
1. Yes you should
2. Not right now, maybe in the future, flashing recovery.img using Heimdall would probably help, but I didn't try it myself and using Heimdall is quite complex
3. In General: The newest .tar (9.34/8.34) as you can't use .zip files
When you want to use Stock Samsung ROM: Version 8
When you want to use CM/AOKP based ROM: Version 9
Remember: No ICS Support!
Hit Thanks and just ask if you need more help.
H3llwar said:
1. Yes you should
2. Not right now, maybe in the future, flashing recovery.img using Heimdall would probably help, but I didn't try it myself and using Heimdall is quite complex
3. In General: The newest .tar (9.34/8.34) as you can't use .zip files
When you want to use Stock Samsung ROM: Version 8
When you want to use CM/AOKP based ROM: Version 9
Remember: No ICS Support!
Hit Thanks and just ask if you need more help.
Click to expand...
Click to collapse
Ok.
But every aosp rom, like Carbon PA and these are based either in AOKP or CM, isnt it?
The newest one is 9/39, is that the one?
francantabria said:
Ok.
But every aosp rom, like Carbon PA and these are based either in AOKP or CM, isnt it?
Click to expand...
Click to collapse
CM & AOKP are actually based on AOSP, so Yes, every AOSP ROM should work.
H3llwar said:
CM & AOKP are actually based on AOSP, so Yes, every AOSP ROM should work.
Click to expand...
Click to collapse
I did what you said and after installing Carbon Rom again recovery is gone.. so I suposse it is Carbon problem. I will do it again and install a different rom
francantabria said:
I did what you said and after installing Carbon Rom again recovery is gone.. so I suposse it is Carbon problem. I will do it again and install a different rom
Click to expand...
Click to collapse
I agree, the problem results of the ROM: But you have to flash dorimanx after carbon because carbon replaces the current kernel with its own CM custom Kernel. It should work just fine with carbon when it's flashed after installing carbon.
Hi, I'm running CyanogenMod 11 nightlies (currently running the 1/6 build) for the i605 and have had a few charging and battery issues. I'm running the stock kernel and the but heard that devil kernel will maybe fix this. I've never flashed a kernel so I have a few questions:
-Where can I find a link to the version of devil that will work with cm11 on i605?
-Should I dirty flash a newer nightly cm 11 build along with the kernel?
-Should I clear the cache before I flash the kernel. What should I make sure to do before flashing?
Thanks, any help will be appreciated.
Sent from my SCH-I605 using Tapatalk
heyheyandroidhey said:
Hi, I'm running CyanogenMod 11 nightlies (currently running the 1/6 build) for the i605 and have had a few charging and battery issues. I'm running the stock kernel and the but heard that devil kernel will maybe fix this. I've never flashed a kernel so I have a few questions:
-Where can I find a link to the version of devil that will work with cm11 on i605?
-Should I dirty flash a newer nightly cm 11 build along with the kernel?
-Should I clear the cache before I flash the kernel. What should I make sure to do before flashing?
Thanks, any help will be appreciated.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Here is where you will find the correct Devil Kernel. You want to download the file called "Devil2-2.3.2-t0lte-DUAL-20140102.zip"
If you choose to flash a newer nightly, do so before you flash the kernel. Each time you flash a nightly it will overwrite the kernel.
As always, make a backup first if you are unsure, just to be safe. Flash the nightly update (or don't, your choice). Clear cache/dalvik, reboot, let the ROM initialize and settle. Then reboot to recovery and flash Devil, clear cache/dalvik, reboot. You will need to flash the kernel every time you flash a new nightly.
Jiggabitties said:
Here is where you will find the correct Devil Kernel. You want to download the file called "Devil2-2.3.2-t0lte-DUAL-20140102.zip"
If you choose to flash a newer nightly, do so before you flash the kernel. Each time you flash a nightly it will overwrite the kernel.
As always, make a backup first if you are unsure, just to be safe. Flash the nightly update (or don't, your choice). Clear cache/dalvik, reboot, let the ROM initialize and settle. Then reboot to recovery and flash Devil, clear cache/dalvik, reboot. You will need to flash the kernel every time you flash a new nightly.
Click to expand...
Click to collapse
Wow thanks a lot you perfectly answered my question.
Sent from my SCH-I605 using Tapatalk