Related
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
Hi! How do you wipe your phone completley? Not only factory reset, but wiping the phone totally clean.
Regards
Using this tool.flash from cwm.remember it will wipe your internal sd-card aswell,so u need an external sd-card to flash new rom or flash with odin.
Happy flashing
zodiaxe66 said:
Using this tool.flash from cwm.remember it will wipe your internal sd-card aswell,so u need an external sd-card to flash new rom or flash with odin.
Happy flashing
Click to expand...
Click to collapse
Thanks! Will i still be able to boot in to CWM recovery and install from external SD?
ZixX63 said:
Thanks! Will i still be able to boot in to CWM recovery and install from external SD?
Click to expand...
Click to collapse
Yes ofcause
Just remember that it will wipe your system partition completely..so you will not have a rom to boot into..keep a ROM in hand to flash after you flash this zip..
Sent from my GT-I9300 using xda app-developers app
hi guys,
my friend is using jellybean rom in his galaxy s2 and he wanna go to custom ICS?
he is using siyah kernel.what step he needs to follow?kindly reply.i wanna help him.thanks mates.
adilliano said:
hi guys,
my friend is using jellybean rom in his galaxy s2 and he wanna go to custom ICS?
he is using siyah kernel.what step he needs to follow?kindly reply.i wanna help him.thanks mates.
Click to expand...
Click to collapse
I guess your friend's SGS2 is root so, the instructions will always be the same.
Copy the Custom ICS Rom in the internal/external sdcard.
Reboot the phone into recovery mode (volume up+home button+power button).
If your in the recovery mode, go to "install zip from sdcard".
"choose zip from sdcard" or "choose zip from internal card". This depends where he/she puts the custom ICS rom.
Select the file.
Choose "Yes" and wait for it to finish.
Now, you have to "wipe data/factory reset".
and then "wipe cache partition".
and then "reboot system now".
Hope this helps.
You asked the same question 3 weeks ago and got an answer.
theunderling said:
You asked the same question 3 weeks ago and got an answer.
Click to expand...
Click to collapse
GB to ICS,ICS to GB,ICS to JB,JB to ICS.all have the same way of flashing custom rom?
Sent from my GT-I9100 using xda app-developers app
WeBMaZTaH said:
I guess your friend's SGS2 is root so, the instructions will always be the same.
Copy the Custom ICS Rom in the internal/external sdcard.
Reboot the phone into recovery mode (volume up+home button+power button).
If your in the recovery mode, go to "install zip from sdcard".
"choose zip from sdcard" or "choose zip from internal card". This depends where he/she puts the custom ICS rom.
Select the file.
Choose "Yes" and wait for it to finish.
Now, you have to "wipe data/factory reset".
and then "wipe cache partition".
and then "reboot system now".
Hope this helps.
Click to expand...
Click to collapse
normally we do full wipe before flashing rom.here you are tell after flashing the rom.its bit confusing.can you clear?
Sent from my GT-I9100 using xda app-developers app
I don't know about GB to ICS because back when my SGS2 was SHW-M250K (Korean Galaxy S2) I took a risk by flashing Litening ROM using Odin and hoping that it would be a success and I'm glad to say that it went perfectly. But now, I flash JB ROM and ICS Custom ROMs via Recovery Mode and not by Odin, and Yes, I do full wipe I flash roms in my phone.
WeBMaZTaH said:
I don't know about GB to ICS because back when my SGS2 was SHW-M250K (Korean Galaxy S2) I took a risk by flashing Litening ROM using Odin and hoping that it would be a success and I'm glad to say that it went perfectly. But now, I flash JB ROM and ICS Custom ROMs via Recovery Mode and not by Odin, and Yes, I do full wipe I flash roms in my phone.
Click to expand...
Click to collapse
did u full wipe from recovery while u had JB and u flash afyer full wope an ICS rom?
Sent from my GT-I9100 using xda app-developers app
It doesn't matter what from and where to.
This way always should work:
0] BACKUP APPS (U would not loose ur Data from sd card)
1) Choose Firmware/Rom
2) Put it on internal sd card (I it's flashable .zip, otherwise u have to flash via Odin and check 'Re-Partition'!)
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card)
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Click to expand...
Click to collapse
CHEERS
Hannibal226 said:
It doesn't matter what from and where to.
This way always should work:
CHEERS
Click to expand...
Click to collapse
thanks alot bro.i was just stuck with full wipe issue.now u solve it.thanks.
Sent from my GT-I9100 using xda app-developers app
Yes I did.
Sent from my GT-I9100 using Tapatalk 2
adilliano said:
thanks alot bro.i was just stuck with full wipe issue.now u solve it.thanks.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Gr8 when I could help.
CHEERS
Hi
I have an xperia ray and I got it with the boatloader unlocked that I didn't unlock it myself
so I don't know how to install the custom ROM
thanks
bashar! said:
Hi
I have an xperia ray and I got it with the boatloader unlocked that I didn't unlock it myself
so I don't know how to install the custom ROM
thanks
Click to expand...
Click to collapse
How do you know, that the bootloader is unlocked?
Check out the stickies in general forum first and read read read
How to install custom rom? Check out my guide, link in my signature
Sent from my Nexus 4 using Tapatalk 4 Beta
bashar! said:
Hi
I have an xperia ray and I got it with the boatloader unlocked that I didn't unlock it myself
so I don't know how to install the custom ROM
thanks
Click to expand...
Click to collapse
1- first all select your favorite rom here you can see all:
http://forum.xda-developers.com/showthread.php?t=1628264
after you download the rom copy it to sd card
2. if you have inlocked botloader first install a kernel this is the tuto:
http://forum.xda-developers.com/showthread.php?t=1879982
i recommend to you this kernel:
http://forum.xda-developers.com/showthread.php?t=2077269
3. enter to cwm mode. turn on the phone, when is turn in on press vol down again and again. when you enter to cwm mode you can move for the menu with vol down and up. for fresh install follow this steps.
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
when the rom was installed reboot your phone and wait. your are ready! :good:
i recommend to you zelly cream rom.
press thnks if i help to you.
luiscedillo80 said:
1- first all select your favorite rom here you can see all:
http://forum.xda-developers.com/showthread.php?t=1628264
after you download the rom copy it to sd card
2. if you have inlocked botloader first install a kernel this is the tuto:
http://forum.xda-developers.com/showthread.php?t=1879982
i recommend to you this kernel:
http://forum.xda-developers.com/showthread.php?t=2077269
3. enter to cwm mode. turn on the phone, when is turn in on press vol down again and again. when you enter to cwm mode you can move for the menu with vol down and up. for fresh install follow this steps.
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
when the rom was installed reboot your phone and wait. your are ready! :good:
i recommend to you zelly cream rom.
press thnks if i help to you.
Click to expand...
Click to collapse
It's not recommended to wipe system! Only wipe system if the developer tells that in the specific rom thread
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
It's not recommended to wipe system! Only wipe system if the developer tells that in the specific rom thread
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
yeah bro thnks for the aclaration. iam only junior. that steps are from zelly cream for that reason i recommended him that rom.
press THNKS if i help to your mind.
luiscedillo80 said:
yeah bro thnks for the aclaration. iam only junior. that steps are from zelly cream for that reason i recommended him that rom.
press THNKS if i help to your mind.
Click to expand...
Click to collapse
No problem, just remember to check out the thread of the rom and read the instructions to see if that's necessary or not, before you start installing. Otherwise you could get a status 7 error in cwm or some files could be missing
Sent from my Nexus 4 running Android 4.2.2
This is a flashable Stock 14.1.B.1.510 Taiwan rom. It is Deodexed and rooted. Install it in CWM. You can use this as a base for your rom. No need to ask. Share it and modify it and lets start some custom roms.
Download​
It is great to be the first reply
Great Job
Really good news...
Sent from my C6802 using Tapatalk 2
m3dd0g said:
This is a flashable Stock 14.1.B.1.510 Taiwan rom. It is Deodexed and rooted. Install it in CWM. You can use this as a base for your rom. No need to ask. Share it and modify it and lets start some custom roms.Download​
Click to expand...
Click to collapse
Thanks. Tell and how to receive the worker CWM Recovery?
Feodorus 4PDA said:
Thanks. Tell and how to receive the worker CWM Recovery?
Click to expand...
Click to collapse
First unlock your bootloader then flash via fastboot this kernel. When booting press volume up and you are in recovery.
m3dd0g said:
First unlock your bootloader then flash via fastboot this kernel. When booting press volume up and you are in recovery.
Click to expand...
Click to collapse
It's OK, thanks. I thought for Locked Bootloader.
Feodorus 4PDA said:
It's OK, thanks. I thought for Locked Bootloader.
Click to expand...
Click to collapse
the main problem is lockbootloader
thank you m3dd0g !!!
start a revolution for Rom Cook
can i flash 475 HK ?
Will it wipe DATA and/or Internal Storage ?
I tried to flash, but the program said "waiting for device".
What does this mean, I don't have unlock bootloader? or I'm on 475?
satawat.thongsawat said:
I tried to flash, but the program said "waiting for device".
What does this mean, I don't have unlock bootloader? or I'm on 475?
Click to expand...
Click to collapse
yes you need to have unlocked bootloader ( make sure you backup TA before unlocking ) then flash this recovery and flash the rom in cwm.
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
hey mate, tried flashing the rom via krabappel2548's kernel.. in twrp it gives an error of updater binary and it flashes fine in cwm. booting now thanks!
m3dd0g said:
First unlock your bootloader then flash via fastboot this kernel. When booting press volume up and you are in recovery.
Click to expand...
Click to collapse
Thanks for cookrom first ZU
GOF007 said:
Will it wipe DATA and/or Internal Storage ?
Click to expand...
Click to collapse
it will wipe system only. just do a wipe fty reset, wipe cache and dalvik. i did /data too.. and flash the rom.
no need to wipe internal sdcard and the rom will not wipe internal data
androidindian said:
it will wipe system only. just do a wipe fty reset, wipe cache and dalvik. i did /data too.. and flash the rom.
no need to wipe internal sdcard and the rom will not wipe internal data
Click to expand...
Click to collapse
I have just finished flash, all 16Gb of data in sdcard are lost in the clean , of course ex_sdcard not deleted
big said:
I have just finished flash, all 16Gb of data in sdcard are lost in the clean , of course ex_sdcard not deleted
Click to expand...
Click to collapse
Impossible.. I've flashed the rom a few times and it does not wipe data on sdcard.. Did you do it manually in recovery?
Sent from my HTC One using XDA Premium 4 mobile app
I have a rom ready but devdb gives server error.. I'll post it asap
Sent from my C6603 using xda app-developers app
In CWM the external SD isn't found and in TWRP I can't flash any rom, flashing fails right at the beginning, it starts format system and then it says, E: error executing udater binary in zip '/exter... the rest in this row isn't readable
error flashing zip '/external_sd/rom/stock_ C68
updating partition details
Mucho79 said:
In CWM the external SD isn't found and in TWRP I can't flash any rom, flashing fails right at the beginning, it starts format system and then it says, E: error executing udater binary in zip '/exter... the rest in this row isn't readable
error flashing zip '/external_sd/rom/stock_ C68
updating partition details
Click to expand...
Click to collapse
Twrp has issues for now.. Use Cwm.. Put the file inside your internal storage.. Go to install.. Select 0..zip file.. Flash away
Sent from my HTC One using XDA Premium 4 mobile app