Hi there !!
Hello everybody and thanks in advance for your help.
I was trying to clean my phone (sim unlocked via imei) of the vendor stuff (yoigo spain), and put a clean rom instead.
First I rooted my device with framaroot method and everyhing was ok. Then, after clean the rom of some unwanted apps (alcatel radio, alcatel power save, etc..) I tried to change the bootanimation, but deleted part of the /system part (build.prop) and on the next reboot the phone was bricked
I read all the thread about developing (Alcatel One Touch 4030x S'POP Development), and everybody say the method to recover is under OTU (one touch upgrade), but when I try it the answer is I have already the latest version and won't upgrade.
I tried all I imagined: wipeing partitions, deleting /system, installing CWM and TWRP, but no sucess..
I tried then to readback my phone, following the post of Cyberangel22k & johnnyspritz on post #204, but still bricked ..
Now when I boot I have 2 animations from manufacturer: alcatel glory2 + alcatel s'pop, the vendor logo (yoigo spain) and after that darkness ..
Please, help me to unbrick. Any help will be apreciated
thanks in advance and greetings from Barcelona (spain)
Take it to Yoigo. I had the same problem, I took it to a Yoigo store, told them I hadn't been even able to test my new phone since it won't start, they sent it to repair service, two weeks later my phone was given back to me good as new.
Related
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
I have an Android phone karbonn a1+ HW ver-3.0.0, SW Ver-2.0.2.
I am a noob but like to experiment.
My phone was rooted and was working on stock firmware as there is not good firmware available for it (After trying several firmware i found only 1 custom was working that too was not good so i reverted back to stock and did some tweaking). It has CWM recovery installed.
Some stupid thing i did before it got bricked.
1- I tried to change font but phone became dead and i used some files to change them but that did not work so i restored my backup.
2- After restoring my backup some crazy ideas struck me, i again wanted to try those custom firmware. As normal restore of (those FW files are backup file) those were not working i tried advanced restored and restored files one by one (img, boot, system etc). After that my phone is dead.
I can enter into Recovery mode, can flash files, can restore backup which are not giving me any error but the phone is not starting. Even my backup files are not working. When i am connecting my phone to PC it is going into a bootloop. (first karbonn logo --then a white screen with vertical lines--then restart again). I am trying for last 15 days days to make it running again but it is not.
KINDLY HELP:crying::crying::crying::crying:
Hi, thank you for using XDA Assist. i'm sorry but there is very little information about your device on XDA. I'm going to ask a moderator to move your post to here, http://forum.xda-developers.com/android/help Hopefuly someone with your device will see it and be able to help.
Good luck!
Hi friends,
dear experts I am facing problem of boot loop
my phone is just showing brand logo and vibrating after few seconds after I installed fake device with xposed andmade changes I think in prop.build file through software mentioned above.
I have ROM back up made through ROM manaager and mtk toolkit and I restored , factory reset but all in vain and in mtk toolkit my device is not shown/reveled. I have installed drivers PDA , adb , phone official but all ended in smoke.oops
kindly tell me the sulotion of this problem. I be strong hope I will get the solution from you EXPERTS Guys!
Hi im new so sorry in advance for misspells or being a noob
I have a Prestigio Multiphone psp5454duo nice phone work pretty well until a root it for the second time using kingroot and the phone went crazy rebooting and freezing!
i look for a rom to replace it but i got 0 results i berly found some info in a custom recovery someone said its compatible with one of the nexus recovery KTU84P (This is the build id )
the board its a msm8916 dual sim
I recently backup the partitions on the phone using partition backup if any developer wants then but the system in unstable reboots randomly, after a factory reset it still reboots randomly, no more freeze for the moment.
I love cyanogenmod if anyone knows if its compatible with this phone can you pls provide me with a download link ???
or any other working rom
Allso the bootloader i tink its lock i found a file to unlock it on a russion forum but was not able to download it with out an account and i am unable to make one since i dont know russion (google translate does not want to translate the registery page!!!)
Hello and i whould like to ask for some help i just bought the leagoo m13 and i know its still a fresh phone but i tried to install a custom twrp but after the flash the phone went into bootloop and i cant access the recovery i whould like to ask help as soon as posibile
I fixed it!. i just needed to use smartphone flash tool and install drivers and i was able to use a stock recovery because it seems that it doesn't support the twrp i downloaded. thank god it didnt get bricked. (BTW am an amateur and this was the first time i encountered a bootloop and i was scared because i was just gifted my Leagoo m13 2 weeks ago i didn't wan't to brick it.) I'm 15 btw and this phone was my first pass 1gb ram that are only good for messeges and calls