Hi guys, I have a problem with a GS3 GT-i9300 the cellular cant open and i have a white screen
I have an Image of the screen but cant post it
I can still put the cellphone in Download mode and i dont see the white screen
What i can do with this guys thanks for help
If you can still put it in download mode try flashing latest samsung rom for your location trough odin and see if that works.
Recovery mode factory reset
What does Product say in download mode .
Read the Sudden Death Syndrome faq .
In download mode says
ODIN MODE
Product name:
Custom Binary download : NO
Current Binary:Samsung official
System status: Custom
Wich rom i need im a kind a noob with those things
But i got Odin v3.07
Try Clockworck Recovery got this error
<ID:0/023> Added!!
<ID:0/023> Odin v.3 engine (ID:23)..
<ID:0/023> File analysis..
<ID:0/023> SetupConnection..
<ID:0/023> Complete(Write) operation failed.
<ID:0/023> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
lefouftw said:
In download mode says
ODIN MODE
Product name:
Custom Binary download : NO
Current Binary:Samsung official
System status: Custom
Wich rom i need im a kind a noob with those things
But i got Odin v3.07
Click to expand...
Click to collapse
Product name ??? I guess it's half sds
lefouftw said:
In download mode says
ODIN MODE
Product name:
Custom Binary download : NO
Current Binary:Samsung official
System status: Custom
Wich rom i need im a kind a noob with those things
But i got Odin v3.07
Click to expand...
Click to collapse
You require a new motherboard .
This may not be covered by warranty .
Related
Hi! A newbie here.
I wanted to flash ics rom over 2.3.4(device is rooted(superoneclick)).
I downloaded rom manager via market, tried getting into CWrecovery, however got this message: E:"Failed to verify whole-file signature".
I read somewhere that I need to flash "PDA" with a .tar via Odin in order for CWR to work. So I downloaded the tar mentioned on the site, then began flashing, with the following results:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now, when I turn my phone on it says: "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
Kies can not recognize the phone, however, Odin can, and pc does the connected beep when device is reconnected.
Is there a way for me to fix my phone, or did I just made a brick out of it?
Flash back to the stock from and then retry. That's what I did for my very first from too.
Send from my G2X!
I apologize humbly for my n00bishness, but how do I do that exactly?
c0rk7 said:
I apologize humbly for my n00bishness, but how do I do that exactly?
Click to expand...
Click to collapse
Here is the link:http://forum.xda-developers.com/showthread.php?t=1075278
http://forum.xda-developers.com/showthread.php?t=1113928
i can see the stock roms here, but none of them matches my region.
I downloaded a rom, device is in download mode.
looks like it's frozen, it's like that on the pic for 20 minutes now.
on the phone:
Odin mode
Product name: GT-i9100
Custom binary download: YES (3 counts)
Current binary: CUSTOM
Downloading..
Do not turn off target!!
What to do?
Turn off battery, remove battery, reattach battrry, then peepare odin, once odin detected, press start
Rom : MIUI ICS XGT 'EXTENDED'
Kernel : Xcell-69X
Modem : XXKP8
Sent from Galaxy SII
c0rk7 said:
I downloaded a rom, device is in download mode.
looks like it's frozen, it's like that on the pic for 20 minutes now.
on the phone:
Odin mode
Product name: GT-i9100
Custom binary download: YES (3 counts)
Current binary: CUSTOM
Downloading..
Do not turn off target!!
What to do?
Click to expand...
Click to collapse
Retry.
Try a different usb port and different usb cable.
I downloaded a different rom, rooted with cwm, made a backup, copied cooked rom next to backup, restored rom via cwm.
working like a charm, thank you everyone.
it stuck on the "Samsung Galaxy III" screen. cant get into recovery mode(stuck on the "Samsung Galaxy III" screen when i try to get into recovery), download mode is working, but failed every time i try to flash new ROM.
please help
XS-IV said:
it stuck on the "Samsung Galaxy III" screen. cant get into recovery mode(stuck on the "Samsung Galaxy III" screen when i try to get into recovery), download mode is working, but failed every time i try to flash new ROM.
please help
Click to expand...
Click to collapse
Probably half SDS.
More info please.
1) Were you rooted?
2) What does download mode say now?
3) What are Odin errors?
if you don't see product name in download mode, you surely bricked the phone. SDS! service center.
rootSU said:
Probably half SDS.
More info please.
1) Were you rooted?
2) What does download mode say now?
3) What are Odin errors?
Click to expand...
Click to collapse
No, the phone was never rooted.
in download mode it say:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
the Odin just said Fail! right after i press start
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
what is SDS ?? will they fix it for free if out of guaranty ??
XS-IV said:
what is SDS ?? will they fix it for free if out of guaranty ??
Click to expand...
Click to collapse
sds-sudden death syndrome. your system status is custom so your warranty will not work. you have to pay for it.
sriram231092 said:
sds-sudden death syndrome. your system status is custom so your warranty will not work. you have to pay for it.
Click to expand...
Click to collapse
i dunno why it said custom ? i only try to flash new roms after SDS. It was all stock
XS-IV said:
i dunno why it said custom ? i only try to flash new roms after SDS. It was all stock
Click to expand...
Click to collapse
even flashing through odin changes system status.
XS-IV said:
i dunno why it said custom ? i only try to flash new roms after SDS. It was all stock
Click to expand...
Click to collapse
Custom is a result of Half SDS which you have. This is why I asked what download mode said, so I could confirm my diagnosis.
You have to send it to service centre. They may or may not fix it under warranty, even though it is completely their fault.
Hi, I bought a used SGS3. I want to root it as I have allways done with my Android phones.
After a lot of hours I spent trying to do it I find out that it could be related to: "CUSTOM BINARY DOWNLOAD: NO" message.
The facts:
- As I know the only way to root the device is using "custom binary download" mode.
- When I try to do it I read at download mode:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
- Odin allways fails at this point and I suppose it is related to above message.
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Added!!
- As I read to increase the binary download counter I need to be root, but I am not.
Conclusion: I will never be root, change de ROM or use privileged apps like backup apps and a device like that is useless for me.
I spent a lot of time trying to solve this and I am desperate.
I will thank any hint on this. Do I have any chance to fix this, root de device and chage ROM to cyanogen or other?
Thanks,
txemi
Do you want to root your s3 or flash custom ROMs?
Device: Samsung Galaxy S3
ROM: CyanogenMod 11 (Temasek Unofficial V24)
Kernel: Boeffla-Kernel-CM11-2.1-Beta7-
Both. I think I cannot flash if I am not root. I would like to be able to became root first and later flash custom ROMs.
txemitron said:
Both. I think I cannot flash if I am not root. I would like to be able to became root first and later flash custom ROMs.
Click to expand...
Click to collapse
Okay.
First go in download mode and flash the CWM (Clockworkmod Recorvery) for your s3 via Odin in Bootloader.
Device: Samsung Galaxy S3
ROM: CyanogenMod 11 (Temasek Unofficial V24)
Kernel: Boeffla-Kernel-CM11-2.1-Beta7-
Odin usually fails with:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
txemitron said:
Odin usually fails with:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
did you flash cf autoroot ? does odin see the phone? while flashing you must be in download mode. it shouldnt take more than a few seconds
txemitron said:
Odin usually fails with:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select file from PDA button and uncheck re-partition
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
After some tests with linux and analyzing dmesg and lsubs output I realised that the real problem was not a software issue, hardware usb port instead.
Being a used phone I have just bought USB cable cannot fit properly in usb port and is nearly impossible to have an usb stable connection. It is not a problem of CUSTOM BINARY DOWNLOAD, it is a problem with any thing requiring usb connection. It seems previous owner did not mind because he used the phone as is and did not use usb for data transfers.
I tryed some cables I have at home but they did not work, now I do not know what to do. I am considering next options, I do not know if there are any more.
1) Going to Samsung tech support. I am not sure if it is expensive or it does take a long time to get phone fixed.
2) Try to give the phone back to seller.
3) Spend a lot of time and going crazy testing usb cables in case some work.
4) Look for some buyer that does not mind about usb and buy another phone for me.
Thanks again for your responses,
txemi
PDA: MK6
PHONE: MK6
CSC: ML1 (BOG)
My GT-I9300 was updated to 4.3 around 3 to 4 weeks ago using the OTA update. Three days ago it suddenly turned off by itself and got stuck at the samsung boot logo.
Whenever i attempt to access the recovery mode i get errors can't mount /efs (file or directory not found) and same error for the cache folder. So the only accessible mode is the download mode:
ODIN MODE
PRODUCT NAME : GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
So far i tried to flash the same stock rom (I9300XXUGMK6_I9300BOGGML1_.tar.md5) using odin versions (3.09, 3.07, 3.04, 1.85) and they all fail with the following message:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Kies emergency recovery also fails. I tried different PCs, usb cables, with or without samsung usb drivers....
Any help will be really appreciated
roger8 said:
PDA: MK6
PHONE: MK6
CSC: ML1 (BOG)
My GT-I9300 was updated to 4.3 around 3 to 4 weeks ago using the OTA update. Three days ago it suddenly turned off by itself and got stuck at the samsung boot logo.
Whenever i attempt to access the recovery mode i get errors can't mount /efs (file or directory not found) and same error for the cache folder. So the only accessible mode is the download mode:
ODIN MODE
PRODUCT NAME : GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
So far i tried to flash the same stock rom (I9300XXUGMK6_I9300BOGGML1_.tar.md5) using odin versions (3.09, 3.07, 3.04, 1.85) and they all fail with the following message:
Kies emergency recovery also fails. I tried different PCs, usb cables, with or without samsung usb drivers....
Any help will be really appreciated
Click to expand...
Click to collapse
I know you don't want to here this but a Nand write fail usually means you need a new motherboard you could try this but it's not looking good >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 <<
Hi, please can you suggest what else I can try to fix this phone.
I have Samsung S3 GT-I9300
It was working fine but suddenly, I turned it on and It is stuck on the Samsung LOGO forever.
It doesn't go to recovery mode when pressing HOME+VOL UP+POWER.
But I could go to Download mode. however Odin fails to install CWM and TWRP
this is download mode:
ODIN MODE
PRODUCT NAME:GT-I9300
CUSTOM BINARY DOWNLOAD:YES (9counts)
CURRENT BINARY: Custum
SYSTEM STATUS:Custom
I tried to install official recovery but it fails too
Code:
<ID:0/022> Added!!
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> recovery.img
<ID:0/022> NAND Write Start!!
<ID:0/022> FAIL!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
although it fails It says : Current binary: samsung Official .
ODIN MODE
PRODUCT NAME:GT-I9300
CUSTOM BINARY DOWNLOAD:YES (9counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS:Custom
but the problem remain the same, NO RECOVERY MODE, and still the same LOGO stuck screen.
Please Any suggestions... .??
Try the rescue firmware thread in general forum, using a pit file. Also, downgrading the bootloader might help flash to work.
boomboomer said:
Try the rescue firmware thread in general forum, using a pit file. Also, downgrading the bootloader might help flash to work.
Click to expand...
Click to collapse
Thanks for your reply .
Just before I start flashing, I want to confirm things as I am a newbie.
I have downloaded FIRMWARE FACTORY 4.1.2
GT-I9300XXEMG4_KOR_MULTI_FACTORY
from this link.
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
Do I have to check Re-partition box too beside auto reboot and F. Reset time?
About downgrading, I don't really know which bootloader I have.
Depend on what version firmware you were on before 4.1 or 4.3. Follow the instructions in that thread.
Downgrade bootloader to BLFB, search for it.
boomboomer said:
Depend on what version firmware you were on before 4.1 or 4.3. Follow the instructions in that thread.
Downgrade bootloader to BLFB, search for it.
Click to expand...
Click to collapse
Odin fails to install again. with Re-partition selected :/
Can you please point me to this BLFB , there are bunch of threads but nothing is clear.
I appreciate your help a lot
I screwed it more trying to install this Bootloader_XXELLA_Odin.tar
now it show this message
"firmware upgrade encountered an issue. please select recovery mode in kies and try again"
i45.tinypic.com/27y2tmd.jpg
please any advices, I am still able to go download mode
1. Downgrade bootloader
2. Flash stock firmware
If the bootloader flashed correctly, then try step 2.
The bootloader you used is not ideal, I don't know if that still has the problem but it might work.
boomboomer said:
1. Downgrade bootloader
2. Flash stock firmware
If the bootloader flashed correctly, then try step 2.
The bootloader you used is not ideal, I don't know if that still has the problem but it might work.
Click to expand...
Click to collapse
because I don't know which or where to find or how to know the right bootloader to install I screwed it more.
can you please give me a link of the bootloader that I am supposed to flash?,
this is is my phone info it may help.
this is my phone: vgy.me/rCuQQD.jpg
this is what kies, show when I try to install firmware: vgy.me/nTicsC.jpg
(it's a real Samsung although it was made in china )
I don't have any links, don't use kies as it just breaks Odin.
boomboomer said:
I don't have any links, don't use kies as it just breaks Odin.
Click to expand...
Click to collapse
I just installed kies after I got this message "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
but it didn't work.
I think there is no luck with this phone !!!! : (
Thanks for your help anyway.