it stuck on the "Samsung Galaxy III" screen. cant get into recovery mode(stuck on the "Samsung Galaxy III" screen when i try to get into recovery), download mode is working, but failed every time i try to flash new ROM.
please help
XS-IV said:
it stuck on the "Samsung Galaxy III" screen. cant get into recovery mode(stuck on the "Samsung Galaxy III" screen when i try to get into recovery), download mode is working, but failed every time i try to flash new ROM.
please help
Click to expand...
Click to collapse
Probably half SDS.
More info please.
1) Were you rooted?
2) What does download mode say now?
3) What are Odin errors?
if you don't see product name in download mode, you surely bricked the phone. SDS! service center.
rootSU said:
Probably half SDS.
More info please.
1) Were you rooted?
2) What does download mode say now?
3) What are Odin errors?
Click to expand...
Click to collapse
No, the phone was never rooted.
in download mode it say:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
the Odin just said Fail! right after i press start
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
what is SDS ?? will they fix it for free if out of guaranty ??
XS-IV said:
what is SDS ?? will they fix it for free if out of guaranty ??
Click to expand...
Click to collapse
sds-sudden death syndrome. your system status is custom so your warranty will not work. you have to pay for it.
sriram231092 said:
sds-sudden death syndrome. your system status is custom so your warranty will not work. you have to pay for it.
Click to expand...
Click to collapse
i dunno why it said custom ? i only try to flash new roms after SDS. It was all stock
XS-IV said:
i dunno why it said custom ? i only try to flash new roms after SDS. It was all stock
Click to expand...
Click to collapse
even flashing through odin changes system status.
XS-IV said:
i dunno why it said custom ? i only try to flash new roms after SDS. It was all stock
Click to expand...
Click to collapse
Custom is a result of Half SDS which you have. This is why I asked what download mode said, so I could confirm my diagnosis.
You have to send it to service centre. They may or may not fix it under warranty, even though it is completely their fault.
Related
Hi all,
I searched xda before starting this tread but i didnt find anything relevant.
I was using cm10.1 on my galaxy s3 along with cwm. Everything ranned normal and smooth.
I used it for more then 2 month's and then suddenly my phone went off.
Now when i reboot it i only get a weird grey/green screen. Not even the samsung galaxy logo or the cyanogenmod boot logo.
Just this grey screen.
I tried starting up recovery by pressing volume up, home button and powerbutton but the same grey screen appear.
What can i do?
tyfriot said:
Hi all,
I searched xda before starting this tread but i didnt find anything relevant.
I was using cm10.1 on my galaxy s3 along with cwm. Everything ranned normal and smooth.
I used it for more then 2 month's and then suddenly my phone went off.
Now when i reboot it i only get a weird grey/green screen. Not even the samsung galaxy logo or the cyanogenmod boot logo.
Just this grey screen.
I tried starting up recovery by pressing volume up, home button and powerbutton but the same grey screen appear.
What can i do?
Click to expand...
Click to collapse
I check download mode and i can enter this one without problems.
Flash a stock Rom and see if the problem exists still
slaphead20 said:
Flash a stock Rom and see if the problem exists still
Click to expand...
Click to collapse
Downloading stock rom atm.
I wonder why i cant flash cm10.1 (zip) in odin since i cant use cwm.
using odin 3.04 and this is what i get when i start to flash the stock rom..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any help?
Starting to look like sds unfortunately
slaphead20 said:
Starting to look like sds unfortunately
Click to expand...
Click to collapse
View attachment 1890554
This is how it looks.
Btw, is there any way this could be warranty?
>> costum binary download: NO
>> current binary: Samsung Official
>> system status: Costum
tyfriot said:
View attachment 1890554
This is how it looks.
Btw, is there any way this could be warranty?
>> costum binary download: NO
>> current binary: Samsung Official
>> system status: Costum
Click to expand...
Click to collapse
Try is all you can do say it suddenly died you suspect SDS .
Depends upon the service centre but technically your warranty is with the vendor and Samsung's is a separate limited warranty .
jje
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Spacedementia87 said:
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Click to expand...
Click to collapse
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah I know,
I made sure to download the correct file
Spacedementia87 said:
Yeah I know,
I made sure to download the correct file
Click to expand...
Click to collapse
Try running as an administrator if you have done that try Odin v 1.85.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
Yeah, I am running as admin.
I will try 1.85 now.
Thanks
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Spacedementia87 said:
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300 << also what does it say on your screen when you are in download mode.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
JJEgan said:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Click to expand...
Click to collapse
This the the file I am trying:
I9300XXEMD2
Should be ok. I am on three.
I have looked in the task manager and can't see any reference to Kies on there. I guess I could uninstall just in case.
What is very worrying now is that I just tried to flash again using ODIN 3.04 and it said I needed a .pit file to repartition. Re-partition is not checked so I don't know why it is asking for this.
tallman43 said:
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> << also what does it say on your screen when you are in download mode.
Click to expand...
Click to collapse
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Spacedementia87 said:
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Click to expand...
Click to collapse
Sorry Yes :crying: I think you need service damaged partition..
tallman43 said:
Sorry Yes :crying: I think you need service damaged partition..
Click to expand...
Click to collapse
How do I do that?
Spacedementia87 said:
How do I do that?
Click to expand...
Click to collapse
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
tallman43 said:
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
Click to expand...
Click to collapse
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Yes search the forum .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
tallman43 said:
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Click to expand...
Click to collapse
Well thanks for the help.
I think I will take it in to get it fixed. I had the screen die on me not so long ago and had to take it in for a replacement screen then, so this is a little frustrating.
Oh well
Thank you very much
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
mahithm said:
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
Click to expand...
Click to collapse
I can't access recovery even after flashing :C just tried it.
Buckstrat said:
I can't access recovery even after flashing :C just tried it.
Click to expand...
Click to collapse
Are you getting bootloops or is it stuck at the bootscreen?
mahithm said:
Are you getting bootloops or is it stuck at the bootscreen?
Click to expand...
Click to collapse
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Buckstrat said:
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Click to expand...
Click to collapse
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
mahithm said:
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Buckstrat said:
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Click to expand...
Click to collapse
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
mahithm said:
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Already tried this one i think is first one i followed.. Still nothing :C
Logg from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_WHLA1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLA1.tar.md5 is valid.
<OSM> CSC_S5830M_UUBLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> HEDGE_NVRAM8_RF_LE.bin
<ID:0/003> sysparm_dep.img
<ID:0/003> boot.img
<ID:0/003> param.lfs
<ID:0/003> system.img
<ID:0/003> sbl.bin
<ID:0/003> userdata.img
<ID:0/003> BcmCP.img
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Buckstrat said:
Already tried this one i think is first one i followed.. Still nothing :C
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Click to expand...
Click to collapse
Try the instructions from here. Do post the result. Hope I Helped
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
mahithm said:
Try the instructions from here. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Done, i'm not making mistakes in flashing :C
eiPeiDweP said:
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
Just tried this one nothing :crying:
Update:
I've got into recovery, rooted and flashes cwm. Did the wiped and flashed again, stil nothing also flashed a rom from CWM and still nothing... Come on guys this cellphone is from my gf and i'm a poor virgin guy who wants to have sex.
Buckstrat said:
Done, i'm not making mistakes in flashing :C
Click to expand...
Click to collapse
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
mahithm said:
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
Click to expand...
Click to collapse
Still nothing bro :crying:.. I just noticed i got over 3gb on different firmwares for the S5830 :cyclops::cyclops:
Bump
Update
Buckstrat said:
Bump
Click to expand...
Click to collapse
Buckstrat said:
Update
Click to expand...
Click to collapse
As much as I want to help you, I'm out of idea's But I'm sure the following people will be able to help you @Hitesh2626 and @amolgosavi (sorry for tagging you two but this guy needs your help).
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Hitesh2626 said:
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Click to expand...
Click to collapse
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Buckstrat said:
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Click to expand...
Click to collapse
Don't flash Ace's firmware it will hard brick then you can't restore it by your self you need to give it to Service Center,
And do split by your self and make a wipe package and flash it follow these video
Hi, please can you suggest what else I can try to fix this phone.
I have Samsung S3 GT-I9300
It was working fine but suddenly, I turned it on and It is stuck on the Samsung LOGO forever.
It doesn't go to recovery mode when pressing HOME+VOL UP+POWER.
But I could go to Download mode. however Odin fails to install CWM and TWRP
this is download mode:
ODIN MODE
PRODUCT NAME:GT-I9300
CUSTOM BINARY DOWNLOAD:YES (9counts)
CURRENT BINARY: Custum
SYSTEM STATUS:Custom
I tried to install official recovery but it fails too
Code:
<ID:0/022> Added!!
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> recovery.img
<ID:0/022> NAND Write Start!!
<ID:0/022> FAIL!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
although it fails It says : Current binary: samsung Official .
ODIN MODE
PRODUCT NAME:GT-I9300
CUSTOM BINARY DOWNLOAD:YES (9counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS:Custom
but the problem remain the same, NO RECOVERY MODE, and still the same LOGO stuck screen.
Please Any suggestions... .??
Try the rescue firmware thread in general forum, using a pit file. Also, downgrading the bootloader might help flash to work.
boomboomer said:
Try the rescue firmware thread in general forum, using a pit file. Also, downgrading the bootloader might help flash to work.
Click to expand...
Click to collapse
Thanks for your reply .
Just before I start flashing, I want to confirm things as I am a newbie.
I have downloaded FIRMWARE FACTORY 4.1.2
GT-I9300XXEMG4_KOR_MULTI_FACTORY
from this link.
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
Do I have to check Re-partition box too beside auto reboot and F. Reset time?
About downgrading, I don't really know which bootloader I have.
Depend on what version firmware you were on before 4.1 or 4.3. Follow the instructions in that thread.
Downgrade bootloader to BLFB, search for it.
boomboomer said:
Depend on what version firmware you were on before 4.1 or 4.3. Follow the instructions in that thread.
Downgrade bootloader to BLFB, search for it.
Click to expand...
Click to collapse
Odin fails to install again. with Re-partition selected :/
Can you please point me to this BLFB , there are bunch of threads but nothing is clear.
I appreciate your help a lot
I screwed it more trying to install this Bootloader_XXELLA_Odin.tar
now it show this message
"firmware upgrade encountered an issue. please select recovery mode in kies and try again"
i45.tinypic.com/27y2tmd.jpg
please any advices, I am still able to go download mode
1. Downgrade bootloader
2. Flash stock firmware
If the bootloader flashed correctly, then try step 2.
The bootloader you used is not ideal, I don't know if that still has the problem but it might work.
boomboomer said:
1. Downgrade bootloader
2. Flash stock firmware
If the bootloader flashed correctly, then try step 2.
The bootloader you used is not ideal, I don't know if that still has the problem but it might work.
Click to expand...
Click to collapse
because I don't know which or where to find or how to know the right bootloader to install I screwed it more.
can you please give me a link of the bootloader that I am supposed to flash?,
this is is my phone info it may help.
this is my phone: vgy.me/rCuQQD.jpg
this is what kies, show when I try to install firmware: vgy.me/nTicsC.jpg
(it's a real Samsung although it was made in china )
I don't have any links, don't use kies as it just breaks Odin.
boomboomer said:
I don't have any links, don't use kies as it just breaks Odin.
Click to expand...
Click to collapse
I just installed kies after I got this message "firmware upgrade encountered an issue. please select recovery mode in kies and try again"
but it didn't work.
I think there is no luck with this phone !!!! : (
Thanks for your help anyway.
Hi!
Here my story.
Flashing "cm-12.1-20151016-UNOFFICIAL-temasek-i9300-V18.0-ds94-FIXED.zip" (Android 5.1.1) and running smooth for 2 days. Recharing battery overnight causing bootloop.
I tried numerous attempts to regain access with odin, however no success.
TRG-I9300XXUGOC1-20150715205218
CF-Auto-Root-m0-m0xx-gti9300
different pit files etc.
Fresh samsung usb driver
Click to expand...
Click to collapse
Product name: GT-I9300
Custom Binary Download: Yes(2 counts)
Current Binary: Custom
System Status: Custom
Click to expand...
Click to collapse
As i understand this means NO emmc failure.
Odin different files 1.85, 3.04, 3.07, 3.10.7
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Gave phone to 2 different mobile stores -> no success.
Is emmc dead?
Any special tricks fix?
greets
Fluffz
Will your device accept a btu stock rom?. I can give you a link if you want to try my stuff..
I wish I stole my HTC M9.
ok, gimme link.
whats about hard brick sd card recovery bootloader?
http://forum.xda-developers.com/showthread.php?t=2581166
i have same working s3 on android 5.1.1 -> one idea is to safe working bootloader to sd card and flash the bricked phone.
I found out that "cm-12.1-20151016-UNOFFICIAL-temasek-i9300-V18.0-ds94-FIXED.zip"
using 4.1.2 bootloader (i9300xxemc2) which can cause bootloop on i9300.
Another i9300 with stock firmware using i9300xxugna8 with bootloader 4.3 should avoid bootloop, however forbid downgrade to earlier versions.
Based on this information, anyway to debrick phone without replacing emmc?
greets