Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
mahithm said:
Once you flash the stock rom back using odin, try doing Wipe data/ factory reset and Wipe cache partitions from Recovery Mode. Do post the result. Hope I Helped
Click to expand...
Click to collapse
I can't access recovery even after flashing :C just tried it.
Buckstrat said:
I can't access recovery even after flashing :C just tried it.
Click to expand...
Click to collapse
Are you getting bootloops or is it stuck at the bootscreen?
mahithm said:
Are you getting bootloops or is it stuck at the bootscreen?
Click to expand...
Click to collapse
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Buckstrat said:
Stuck at bootscren as appointed in first thread.. sometimes it goes after bootscreen to recovery (after flashing) and show the things listed in first post.
Click to expand...
Click to collapse
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
mahithm said:
Use the following guide to flash the stock rom back. You can find all the necessary files here,
[Guide] Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Buckstrat said:
Just re-downlaoded everything flashed (Always succesfull on Odin) and still stuck and boot screen.
Click to expand...
Click to collapse
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
mahithm said:
Try using the following guide. This should work. Here is the link,
Unbrick/Firmware restore | Flash GUIDE
Do post the result. Hope I Helped
Click to expand...
Click to collapse
Already tried this one i think is first one i followed.. Still nothing :C
Logg from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_WHLA1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLA1.tar.md5 is valid.
<OSM> CSC_S5830M_UUBLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> HEDGE_NVRAM8_RF_LE.bin
<ID:0/003> sysparm_dep.img
<ID:0/003> boot.img
<ID:0/003> param.lfs
<ID:0/003> system.img
<ID:0/003> sbl.bin
<ID:0/003> userdata.img
<ID:0/003> BcmCP.img
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Buckstrat said:
Already tried this one i think is first one i followed.. Still nothing :C
EDIT:
Managed to get into recovery mode 2 times, one of them wipe cache data/partition/factory reset.. Reboot and still stuck and boot screen, the second time did the wipes and flashed the same rom right after.. Still stuck at bootscreen can't manage to get into recovery again.
Click to expand...
Click to collapse
Try the instructions from here. Do post the result. Hope I Helped
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
mahithm said:
Try the instructions from here. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Done, i'm not making mistakes in flashing :C
eiPeiDweP said:
I think I have encountered this issue before . I just flash everything i can flash in it. Nothing worked. But some guys recommended me this firmware. I think it's like 'Open Australia'. I think it's ATO_Repacked. And I flashed it. And It Worked like magic .
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
Just tried this one nothing :crying:
Update:
I've got into recovery, rooted and flashes cwm. Did the wiped and flashed again, stil nothing also flashed a rom from CWM and still nothing... Come on guys this cellphone is from my gf and i'm a poor virgin guy who wants to have sex.
Buckstrat said:
Done, i'm not making mistakes in flashing :C
Click to expand...
Click to collapse
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
mahithm said:
The link was mainly intended to provide you the split stock firmware. Please download all the necessary files from the "Required Things" section of the above link and perform flashing again. Hopefully it works this time
Click to expand...
Click to collapse
Still nothing bro :crying:.. I just noticed i got over 3gb on different firmwares for the S5830 :cyclops::cyclops:
Bump
Update
Buckstrat said:
Bump
Click to expand...
Click to collapse
Buckstrat said:
Update
Click to expand...
Click to collapse
As much as I want to help you, I'm out of idea's But I'm sure the following people will be able to help you @Hitesh2626 and @amolgosavi (sorry for tagging you two but this guy needs your help).
Buckstrat said:
Hello, i've been broking my head with this cellphone ...
First than all i can acces Download Mode (Volume up - Volume down - Power buttom) but i can't not acces Recovery Mode as i try the key combination (Volume Up - Menu buttom - Power buttom) it gets stuck on Samsung Galaxy Ace GT S583M logo and never even reach Samsumg boot logo.
I tried flashing usign several odins and firmwares from M and I.. On sammobile. also with different versions of odin it keeps getting stuck on bootscreen. But sometimes when i flash with some roms it pass the Boot Screen logo and gets to a screen that i think is recovery.. it says something like
Looking for Updates
Appliing Update Package
Succeed
Appliing Multi CSC
Suceed
Reboot
and after that it keeps getting on bootscreen.
Can anyone help?
Click to expand...
Click to collapse
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Hitesh2626 said:
Just download one new firmware of your model only
And while spliting it do make wipe packages dont make non-wipe package and just flash them and see the result , i hope these will work because it erase all data /partitions of the Phone.
Click to expand...
Click to collapse
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Buckstrat said:
I've tried a lot of different firmwares who seems to work in another cellphones.. on intener (havn't tried on my another ace 'cause i'm afraid of bricking it too) but i will split the firmware my self this time.
I'll post the results.
Click to expand...
Click to collapse
Don't flash Ace's firmware it will hard brick then you can't restore it by your self you need to give it to Service Center,
And do split by your self and make a wipe package and flash it follow these video
Related
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
harpal singh said:
hello everyone...
today i have downloaded Retribution_alpha#5 from this post.... http://forum.xda-developers.com/showthread.php?t=1799236&page=2
i flash it using ClockWorkRec5830i
and a massage of successfully installation was showed..
but after reboot, phone struck at the ACE logo..... and nothing happens......
when i tried to go in recovery mode, i can't.......but downloading mode is working... but when i use odin and tried to flash S5830IXXLF3_S5830IODDLF1_INS ... it shows connection failed...
plz help me.....
Click to expand...
Click to collapse
ODIN REPORT.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl.bin
<ID:0/005> BcmCP.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Y r u using .pit file?
domnic79 said:
Y r u using .pit file?
Click to expand...
Click to collapse
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
harpal singh said:
should i not use .pit file.... actually when i download the Odin1.85.zip file... there is a pit file... that's why i used it... is there another method to flash....
Click to expand...
Click to collapse
No. From where did u get the multi package firmware?
recovery problem wid ace cream v.1
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
dylan.james1947 said:
i too hav the same problem but i flashed acecream v.1 on my samsung galaxy ace s5830i it stoped on the samsung boot screen
wat should i do pls guide me i really need help
Click to expand...
Click to collapse
Download stock firmware from HERE & flash it. Do not use .pit file.
domnic79 said:
No. From where did u get the multi package firmware?
Click to expand...
Click to collapse
no it is not a multi package firmware.... it is one file packege.... .S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar.md5
and i put it in PDA section
thaks
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
thanks man your help it is back to normal:good
domnic79 said:
Download stock firmware from HERE & flash it. Do not use .pit file.
Click to expand...
Click to collapse
I have a very similar problem. I tried to flash a ROM on my ace-i and got stuck at the boot logo. I cant get into recovery mode. The download mode works fine so, I tried to flash the stock rom using odin but the phone is not even connecting, I think it is because I have USB debugging off on the phone. I am not sure what to do! I have attached a pic of what i have done on odin. I know the ID:COM thing should be yellow but its not! I have the USB driver also installed!
Galaxy Ace Not entering Recovery mode
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
RamEEz said:
guys i have a similar problem... my phone is locked for entering wrong patterns. phone goes into download mode when i press Vol UP + Vol Down + Power. but will not go into recovery mode i tried many methods mentioned on in here and in other places as well (press and hold the Home button) Yes! trust me i have been at this for the past two days.
i can flash fine. but phone is still locked. i tried flashing CWM custom recovery through Odin but it wont go beyond writing nand. as in the cwm will not get written.
any solutions??
Click to expand...
Click to collapse
Go into download mode and flash stock rom using Odin.
Sent from my iPad using Tapatalk - now Free
Envy-X said:
Go into download mode and flash stock rom using Odin.
Click to expand...
Click to collapse
Did that., tried a few different ones as well. downloaded them from samfirmware, still its locked.
Hi Pros,
I am very new to this and just created by ID after my phone went into a boot loop.
I have been using a galaxy S3 (GT-I9300) that i bought from a friend for the last 3 months. It worked perfect and I loved it. However today while calling a friend the phone hanged. I tried to restart and nothing happened so i pulled the battery out and restarted it. Since then the phone has been continuously restarting. On researching i realized that there is a term for this - "boot loop".
I tried the Volume Up + Power + Home and went into recovery mode. I wiped the data and wiped the cache. It did not help.
I tried the Volume down + Power + Home and went into Download Mode - ODIN (this would mean my friend flashed it before he gave it to me). I downloaded a custom stock ROM and used ODIN 3.0 to update it. It successfully finished but the phone still keeps restarting. I can only get till the screen to select the language and then it restarts.
I am very confused now and need help to fix this.
If you can get to the language screen then it's not a boot loop.. I'm sure..
Can you boot into recovery using vol up + home + power.. What do you see then?
What stock firmware did you flash and where from? Is the right region?
NatTheCat said:
If you can get to the language screen then it's not a boot loop.. I'm sure..
Can you boot into recovery using vol up + home + power.. What do you see then?
What stock firmware did you flash and where from? Is the right region?
Click to expand...
Click to collapse
Thanks for replying. I get the language screen but before I can select anything it just re-boots.
In recovery i see the following options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
How can I know if the region is right? I have it from a friend so I am not sure what region I am looking for. I download the stock ROM from http://forum.xda-developers.com/showthread.php?t=1646610.
What do you think might the problem be?
In that section do a factory reset then clear the cache then factory reset again..
Then install the Poland stock rom
Edit: You may have to change the country code after its been flashed
Hey demon ! Is your phone rooted ?
Sent from my GT-I9300 using Tapatalk 2
NatTheCat said:
In that section do a factory reset then clear the cache then factory reset again..
Then install the Poland stock rom
Edit: You may have to change the country code after its been flashed
Click to expand...
Click to collapse
I did a factory reset -> clear cache -> factory reset from the recovery mode and installed the Poland stock ROM. It completed successfully as well. However the same problem persists. The phone starts, boots and shows the Samsung icon and then in about 15 seconds again restarts.
The following is the log from the ODIN.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELKC_I9300OXXELK4_I9300XXELKC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
xanthrax said:
Hey demon ! Is your phone rooted ?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I assume I am rooted if i can go into ODIN mode using Volume down + Home + Power. I got the phone from a friend who I cannot trace now. So I am at your mercy.
Root is a word i just heard today when I wanted to fix my phone.
Most probably not rooted considering tha your recovery doesn't contain the option to flash from sd card ...
Sent from my GT-I9300 using Tapatalk 2
Yepp that all looks the real deal.. You could try flashing a Cm10 ROM..
Rest the phone and cache again
Edit
Download that top nightly and extract it then let odin find the file and flash
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
No your not rooted.. Your on stock recovery not CWM
NatTheCat said:
Yepp that all looks the real deal.. You could try flashing a Cm10 ROM..
Rest the phone and cache again
Download that top nightly and extract it then let odin find the file and flash
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
No your not rooted.. Your on stock recovery not CWM
Click to expand...
Click to collapse
xanthrax said:
Most probably not rooted considering tha your recovery doesn't contain the option to flash from sd card ...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Guys. I now understand that I am not rooted. I am downloading the CyanogenMod.
How do you think can this happen? Is some App causing the issue? I am try to understand that might be the cause of this. Can this be a hardware issue?
It could well have been an app that caused the problem in the first place but it's more likely the ROM.. Now since your not sure what ROM it was on its hard to Pont a finger at why..
When you format all apps and data are gone. Except the stuff in internal and external storage.. I.e Music and photos..
I don't think think that it is a hardware issue as it's most likely it would not boot to language menu.. Could be wrong though
Keep us informed on how it's going!
I personally don't like odin ... my advice is to roit your phone and then you'll have more options to fix issues
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
I personally don't like odin ... my advice is to roit your phone and then you'll have more options to fix issues
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yeh I agree it's easier without it but..
How can he do that when it's in a boot loop.. The issue at hand is he has no ROM installed..
I rooted my phone using sgs3 toolkit by Mike , you don't need a rom installed jyst boot in download mode and follow the instructions.
Sent from my GT-I9300 using Tapatalk 2
xanthrax said:
I rooted my phone using sgs3 toolkit by Mike , you don't need a rom installed jyst boot in download mode and follow the instructions.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
But you needed to use odin to flash the toolkit right?
NatTheCat said:
But you needed to use odin to flash the toolkit right?
Click to expand...
Click to collapse
No mate ... check the thread
http://forum.xda-developers.com/showthread.php?t=1703488
Sent from my GT-I9300 using Tapatalk 2
Guys,
Here is the latest update. I downloaded the stock ROM based on the model number and region and flashed my phone using ODIN.
The issue still persists, but in a very weird manner. The phone boots, then stays on for about 60 seconds. During this 60 seconds, you can call, text, surf and do whatever you want. Then the Phone re-starts. Then the phone is usable again for some time before re-starting.
Does this give you pros any idea on what might be wrong? Is this a boot-loop?
Latest Update:-
After a 4-5 restarts, the phone did not restart for the last one hour. I could text and even check my voice mails. The phone is the stock ROM and I have not installed any apps yet.
Then it all started again with a different frequency. Reboot and phone usable for 60 seconds-15 minutes and then restart!!!!
Now I am confused even more and want to get to the bottom of this issue.
1. Can this be a hardware issue?
2. Why did the issue start in the first place?
3. When I flashed ROM from a different region, can the phone detect that and restart it?
4. Is it because I am not rooted?
5. If I root the device, can i install ROM from different region?
Please pros, any guesstimate is appreciated.
Is not a boot loop mate. Endless reboots without start is .
Sent from my GT-I9300
I had this happen on my galaxy s2 idk if its same but it ended up being a bad motherboard/sticky power button
Sent from my SAMSUNG-SGH-T989 using xda premium
Hey guys,
I recently flashed null_24 custom rom and after rebooting the phone it got stuck at the Samsung Galaxy s3 logo.
When trying to enter CWM (Touch recovery) i get a black screen and it seems to freeze.
I was able to enter download mode and tried to flash stock rom via Odin.
I tried rebooting my PC and using different USB ports but it failed every time...
Then i tried to recover my phone via kies but it got stuck at 0%
Is there anything i can do or is my phone broken for good?
I could use any help!
Thanks in advance
You need to give more detail.
Do you have an internation or usa s3?
What error did you get with odin?
If you flashed a rom image for a different phone then your phone is probably bricked. Likewise if you get pit errors in odin. If thats the case then it needs a repair job.
Sent from my GT-I9300 using xda premium
I have an international s3
I flashed null_ roms before, and hat no problems with them. But null_24 didn't let me boot and froze my cwm.
Here's my Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The log doesnt look good. I would not mess with it until somebody more knowledgable can help.
If you try things like pit files you may make it beyond repair by yourself and need to send it somewhere for repair.
Sorry I cant really help you further and I hope you get it sorted.
Sent from my GT-I9300 using xda premium
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Theshawty said:
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Is there anything else I can do?
JonOssim said:
Is there anything else I can do?
Click to expand...
Click to collapse
No looks like you broke it and need a service centre .
jje
JonOssim said:
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Click to expand...
Click to collapse
Nope. Service Center it is.
Sent from my GT-I9300 using xda app-developers app
Is there any way I can reset the flash counter via download mode?
And is there any way to retrieve my data on my internal sd?
So I guess it's a no?
JonOssim said:
So I guess it's a no?
Click to expand...
Click to collapse
You could try install a kernel only in odin. One with a recovery. Speedmod maybe? This may give you your recovery back and odin might let it Flash.
Worth a try
Drew071
Sent from my GT-I9300 using xda app-developers app
Okay thanks!
I'll try it when i get home
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
This is so frustrating!
I tried flashing the kernel hundred times but i get the same errorlog as before...
I'll try to flash older firmwares like you said ratatattata
ratatattata said:
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
Click to expand...
Click to collapse
hey, did you have the same odin error log as me??
JonOssim said:
hey, did you have the same odin error log as me??
Click to expand...
Click to collapse
Yes, I believe it was just that log.
Hello, i flashed my s3 to Omega rom then after trying to restore my EFS using Hc-ktool, now my phone is stuck at boot logo and failed to load, i tried to restore my phone to stock firmware using ODIN but still the same. still stuck at samsung galaxy logo. any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300XEFELL1_I9300XXELKB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Boot into recovery and factory reset.
boomboomer said:
Boot into recovery and factory reset.
Click to expand...
Click to collapse
i tried it still no luck :crying:
try flashing a custom recovery(CWM touch or PHILZ) and then making a full wipe from recovery.
sriram231092 said:
try flashing a custom recovery(CWM touch or PHILZ) and then making a full wipe from recovery.
Click to expand...
Click to collapse
i made a full wipe/factory reset, dalvik cache, wipe cache partition still not working. could this be a hardware issue?
d_tan10 said:
i made a full wipe/factory reset, dalvik cache, wipe cache partition still not working. could this be a hardware issue?
Click to expand...
Click to collapse
Download the firmware agin .
Flash stock rom to test hardware after a full wipe
JJEgan said:
Download the firmware agin .
Flash stock rom to test hardware after a full wipe
Click to expand...
Click to collapse
i downloaded a new stock firmware again from sammobile.com now im having boot loops. putting it back to stock firmware should fix the problem but mine doesnt.
d_tan10 said:
i downloaded a new stock firmware again from sammobile.com now im having boot loops. putting it back to stock firmware should fix the problem but mine doesnt.
Click to expand...
Click to collapse
which f/w did you flash? did you factory reset immediately after flashing the f/w?
sriram231092 said:
which f/w did you flash? did you factory reset immediately after flashing the f/w?
Click to expand...
Click to collapse
I9300XXEMG4_I9300XEFEMG2_I9300XXEMG4_HOME.tar.md5
Yes i did a factory reset/data wipe using stock recovery
d_tan10 said:
I9300XXEMG4_I9300XEFEMG2_I9300XXEMG4_HOME.tar.md5
Yes i did a factory reset/data wipe using stock recovery
Click to expand...
Click to collapse
now that is odd! restoring EFS should have bricked the phone! but that's not a hard brick. as you have flashed XXEMG4, now you have a chance of flashing a f/w newer than that(like XXEMG5 or XXMEG6)! try flashing either of these. if the problem still persists, send it to service center.
:good:
have you tried removing the battery for a few minutes ?
sriram231092 said:
now that is odd! restoring EFS should have bricked the phone! but that's not a hard brick. as you have flashed XXEMG4, now you have a chance of flashing a f/w newer than that(like XXEMG5 or XXMEG6)! try flashing either of these. if the problem still persists, send it to service center.
:good:
Click to expand...
Click to collapse
Yes i can flash stock firmware using Odin also able to install Custom rom using CWM. the problem is just the booting up, im downloading I9300XXEMG6_I9300PHNEMG2_PHN.zip now. Do you think the service center will repair my phone even if they see i have flash counts?
ashraf sharif said:
have you tried removing the battery for a few minutes ?
Click to expand...
Click to collapse
Yes, i took the battery,SIM,memory card out and put it back
have you tried kies? if not do this, BEFORE CONNECTING PHONE TO PC start kies go to upgrade and initialisation. enter your phone model number and serial number. put phone in download mode, vol down +home+power NOW CONNECT PHONE TO PC. this should force kies to upgrade your firmware
d_tan10 said:
Yes i can flash stock firmware using Odin also able to install Custom rom using CWM. the problem is just the booting up, im downloading I9300XXEMG6_I9300PHNEMG2_PHN.zip now. Do you think the service center will repair my phone even if they see i have flash counts?
Click to expand...
Click to collapse
they will repair what ever may happen to your phone but will charge you. did you try flashing CM10.2 roms or aosp custom roms?
since odin is not solving your issue than perhaps kies may fix it. i would try kies before service center as it probably will work .even if it does not solve the looping it would leave your phone with official status and may even allow you to get your phone fixed under warranty. after all kies and ota updates are the only official ways to upgrade your firmware under warranty.
Ok thanks, ill keep you guys posted on the status of my phone
XXEMG6 didnt work for me still stuck on the boot loop and also samsung kies, is there any other way i can fix my phone before going to the service center?
maybe flash an emergency firmwareRescue http://forum.xda-developers.com/showthread.php?t=1825272 these firmwares have pit partitions if you flash pit better make sure its the right one
d_tan10 said:
XXEMG6 didnt work for me still stuck on the boot loop and also samsung kies, is there any other way i can fix my phone before going to the service center?
Click to expand...
Click to collapse
send it to SC before something very bad happens to your phone. you should've been careful while flashing. hope you get your phone in a good working condition.
:good:
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.